hw/loongarch/virt: Enable extioi virt extension

This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v

hw/loongarch/virt: Enable extioi virt extension

This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>

show more ...

hw/loongarch/virt: Use MemTxAttrs interface for misc ops

Use MemTxAttrs interface read_with_attrs/write_with_attrs
for virt_iocsr_misc_ops.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by

hw/loongarch/virt: Use MemTxAttrs interface for misc ops

Use MemTxAttrs interface read_with_attrs/write_with_attrs
for virt_iocsr_misc_ops.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-3-gaosong@loongson.cn>

show more ...

hw/intc/loongarch_extioi: Add extioi virt extension definition

On LoongArch, IRQs can be routed to four vcpus with hardware extended
IRQ model. This patch adds the virt extension definition so that

hw/intc/loongarch_extioi: Add extioi virt extension definition

On LoongArch, IRQs can be routed to four vcpus with hardware extended
IRQ model. This patch adds the virt extension definition so that
the IRQ can route to 256 vcpus.

1.Extended IRQ model:
|
+-----------+ +-------------|--------+ +-----------+
| IPI/Timer | --> | CPUINTC(0-3)|(4-255) | <-- | IPI/Timer |
+-----------+ +-------------|--------+ +-----------+
^ |
|
+---------+
| EIOINTC |
+---------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+--------+ +---------+ +---------+
| UARTs | | Devices | | Devices |
+--------+ +---------+ +---------+

2.Virt extended IRQ model:

+-----+ +---------------+ +-------+
| IPI |--> | CPUINTC(0-255)| <-- | Timer |
+-----+ +---------------+ +-------+
^
|
+-----------+
| V-EIOINTC |
+-----------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+--------+ +---------+ +---------+
| UARTs | | Devices | | Devices |
+--------+ +---------+ +---------+

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-2-gaosong@loongson.cn>

show more ...

tests/libqos: Add loongarch virt machine node

Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c

It contains a generic-pcihost

tests/libqos: Add loongarch virt machine node

Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c

It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.

Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch/virt: Fix FDT memory node address width

Higher bits for memory nodes were omitted at qemu_fdt_setprop_cells.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.

hw/loongarch/virt: Fix FDT memory node address width

Higher bits for memory nodes were omitted at qemu_fdt_setprop_cells.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240520-loongarch-fdt-memnode-v1-1-5ea9be93911e@flygoat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch: Remove minimum and default memory size

Some qtest test cases such as numa use default memory size of generic
machine class, which is 128M by fault.

Here generic default memory size is

hw/loongarch: Remove minimum and default memory size

Some qtest test cases such as numa use default memory size of generic
machine class, which is 128M by fault.

Here generic default memory size is used, and also remove minimum memory
size which is 1G originally.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-6-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch: Refine system dram memory region

For system dram memory region, it is not necessary to use numa node
information. There is only low memory region and high memory region.

Remove numa n

hw/loongarch: Refine system dram memory region

For system dram memory region, it is not necessary to use numa node
information. There is only low memory region and high memory region.

Remove numa node information for ddr memory region here, it can reduce
memory region number on LoongArch virt machine.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch: Refine fwcfg memory map

Memory map table for fwcfg is used for UEFI BIOS, UEFI BIOS uses the first
entry from fwcfg memory map as the first memory HOB, the second memory HOB
will be us

hw/loongarch: Refine fwcfg memory map

Memory map table for fwcfg is used for UEFI BIOS, UEFI BIOS uses the first
entry from fwcfg memory map as the first memory HOB, the second memory HOB
will be used if the first memory HOB is used up.

Memory map table for fwcfg does not care about numa node, however in
generic the first memory HOB is part of numa node0, so that runtime
memory of UEFI which is allocated from the first memory HOB is located
at numa node0.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch: Refine fadt memory table for numa memory

One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size fo

hw/loongarch: Refine fadt memory table for numa memory

One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.

Limitations for minimum memory size for both total memory and numa
node0 is removed for fadt numa memory table creation.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/loongarch: Add VM mode in IOCSR feature register in kvm mode

If VM runs in kvm mode, VM mode is added in IOCSR feature register.
So guest can detect kvm hypervisor type and enable possible pv fun

hw/loongarch: Add VM mode in IOCSR feature register in kvm mode

If VM runs in kvm mode, VM mode is added in IOCSR feature register.
So guest can detect kvm hypervisor type and enable possible pv functions.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240514025109.3238398-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20240509

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKC

Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20240509

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
# 33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
# DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
# 4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
# =RLFu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 May 2024 10:02:10 AM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu:
target/loongarch: Put cpucfg operation before CSR register
target/loongarch: Add TCG macro in structure CPUArchState
hw/loongarch: Refine default numa id calculation

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/loongarch: Refine default numa id calculation

With numa_test test case, there is subcase named test_def_cpu_split(),
there are 8 sockets and 2 numa nodes. Here is command line:
"-machine smp.cpus

hw/loongarch: Refine default numa id calculation

With numa_test test case, there is subcase named test_def_cpu_split(),
there are 8 sockets and 2 numa nodes. Here is command line:
"-machine smp.cpus=8,smp.sockets=8 -numa node,memdev=ram -numa node"

The required result is:
node 0 cpus: 0 2 4 6
node 1 cpus: 1 3 5 7
Test case numa_test fails on LoongArch, since the actual result is:
node 0 cpus: 0 1 2 3
node 1 cpus: 4 5 6 7

It will be better if all the cpus in one socket share the same numa
node. Here socket id is used to calculate numa id in function
virt_get_default_cpu_node_id().

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240319022606.2994565-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

hw/intc/loongarch_ipi: Rename as loongson_ipi

This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.

Signed-off-by: Jiaxun Yan

hw/intc/loongarch_ipi: Rename as loongson_ipi

This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/loongarch: Rename LoongArchMachineState with LoongArchVirtMachineState

Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with Loong

hw/loongarch: Rename LoongArchMachineState with LoongArchVirtMachineState

Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with LoongArchVirtMachineState
*lvms.

Rename function specific for virtmachine loongarch_xxx()
with virt_xxx(). However some common functions keep unchanged such as
loongarch_acpi_setup()/loongarch_load_kernel(), since there functions
can be used for real hw boards.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-3-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/loongarch: Rename LOONGARCH_MACHINE with LOONGARCH_VIRT_MACHINE

On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE

hw/loongarch: Rename LOONGARCH_MACHINE with LOONGARCH_VIRT_MACHINE

On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE.
Machine name about Other real hw boards can be added in future.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-2-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/loongarch/virt: Fix memory leak

The char pointer 'ramName' point to a block of memory,
but never free it. Use 'g_autofree' to automatically free it.

Resolves: Coverity CID 1544773

Fixes: 0cf147

hw/loongarch/virt: Fix memory leak

The char pointer 'ramName' point to a block of memory,
but never free it. Use 'g_autofree' to automatically free it.

Resolves: Coverity CID 1544773

Fixes: 0cf1478d6 ("hw/loongarch: Add numa support")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240507022239.3113987-1-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/loongarch: move memory map to boot.c

Ensure that it can be used even if virt.c is not included in the build, as
is the case for --without-default-devices.

Signed-off-by: Paolo Bonzini <pbonzini@

hw/loongarch: move memory map to boot.c

Ensure that it can be used even if virt.c is not included in the build, as
is the case for --without-default-devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240507145135.270803-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/loongarch: Add cells missing from rtc node

rtc node need interrupts and interrupt-parent cells.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-

hw/loongarch: Add cells missing from rtc node

rtc node need interrupts and interrupt-parent cells.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-18-gaosong@loongson.cn>

show more ...

hw/loongarch: Add cells missing from uart node

uart node need interrupts and interrupt-parent cells.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Messag

hw/loongarch: Add cells missing from uart node

uart node need interrupts and interrupt-parent cells.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-17-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt remove unused irqchip node

This patch removes the unused fdt irqchip node.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <2

hw/loongarch: fdt remove unused irqchip node

This patch removes the unused fdt irqchip node.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-16-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt adds pcie irq_map node

This patch adds pcie irq_map node for FDT.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <2024042609

hw/loongarch: fdt adds pcie irq_map node

This patch adds pcie irq_map node for FDT.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-15-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt adds pch_msi Controller

fdt adds pch msi controller, we use 'loongson,pch-msi-1.0'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongson-pch-msi.c
https:/

hw/loongarch: fdt adds pch_msi Controller

fdt adds pch msi controller, we use 'loongson,pch-msi-1.0'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongson-pch-msi.c
https://lore.kernel.org/r/20200528152757.1028711-6-jiaxun.yang@flygoat.com

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-14-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt adds pch_pic Controller

fdt adds pch pic controller, we use 'loongson,pch-pic-1.0'

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongson-pch-pic.c
https://

hw/loongarch: fdt adds pch_pic Controller

fdt adds pch pic controller, we use 'loongson,pch-pic-1.0'

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongson-pch-pic.c
https://lore.kernel.org/r/20200528152757.1028711-4-jiaxun.yang@flygoat.com

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-13-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt adds Extend I/O Interrupt Controller

fdt adds Extend I/O Interrupt Controller,
we use 'loongson,ls2k2000-eiointc'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip

hw/loongarch: fdt adds Extend I/O Interrupt Controller

fdt adds Extend I/O Interrupt Controller,
we use 'loongson,ls2k2000-eiointc'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongson-eiointc.c
https://lore.kernel.org/r/764e02d924094580ac0f1d15535f4b98308705c6.1683279769.git.zhoubinbin@loongson.cn

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-12-gaosong@loongson.cn>

show more ...

hw/loongarch: fdt adds cpu interrupt controller node

fdt adds cpu interrupt controller node,
we use 'loongson,cpu-interrupt-controller'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irq

hw/loongarch: fdt adds cpu interrupt controller node

fdt adds cpu interrupt controller node,
we use 'loongson,cpu-interrupt-controller'.

See:
https://github.com/torvalds/linux/blob/v6.7/drivers/irqchip/irq-loongarch-cpu.c
https://lore.kernel.org/r/20221114113824.1880-2-liupeibao@loongson.cn

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-11-gaosong@loongson.cn>

show more ...