hw/arm/stellaris: Drop useless casts from void * to pointer

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 202301

hw/arm/stellaris: Drop useless casts from void * to pointer

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu into staging

Add cortex-a35.
Fix bcm2835 framebuffer for rpi firmware.
Add FEAT_ETS.
Add FEAT_PMUv3p5.
Cleanups to armv7m_load_kernel

Merge tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu into staging

Add cortex-a35.
Fix bcm2835 framebuffer for rpi firmware.
Add FEAT_ETS.
Add FEAT_PMUv3p5.
Cleanups to armv7m_load_kernel.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMhwAsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/7Xgf9Ezg+etwsEzY0EWtH
# yoQ7ymJHM1VKqtLkbk9U+Ju18YHEi3fwbYbfLgzkAMFHKDUteKJivKm2w41tsw5g
# lE+5PojQT3k8PffaqeFzKG/JsDPoqKtTa23WjkafbIQAbjRT8JtmF/JmSLaaxyqW
# DozPXJ9jXMS+Q2BxHnoCBuy/Kb3zsqekCr8DOgUIXY5gcAB6q1I8SMX2BrhsIyvV
# vZxNm+hFDCOJtXvkAekMrwGkiIBYoBNpswnv40ldeSvRtD8tnty73JUt+AnWoCwi
# zH4k+CvWICIuZT7oxVecRhlOojtaP5cUTXs0+zhk6GxEx/X6wmXd42heO9ZJL0y1
# 6FH0xw==
# =ohPU
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Sep 2022 07:50:35 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu:
target/arm: Make boards pass base address to armv7m_load_kernel()
target/arm: Remove useless TARGET_BIG_ENDIAN check in armv7m_load_kernel()
target/arm: Report FEAT_PMUv3p5 for TCG '-cpu max'
target/arm: Support 64-bit event counters for FEAT_PMUv3p5
target/arm: Implement FEAT_PMUv3p5 cycle counter disable bits
target/arm: Rename pmu_8_n feature test functions
target/arm: Detect overflow when calculating next PMU interrupt
target/arm: Honour MDCR_EL2.HPMD in Secure EL2
target/arm: Ignore PMCR.D when PMCR.LC is set
target/arm: Don't mishandle count when enabling or disabling PMU counters
target/arm: Correct value returned by pmu_counter_mask()
target/arm: Don't corrupt high half of PMOVSR when cycle counter overflows
target/arm: Add missing space in comment
target/arm: Advertise FEAT_ETS for '-cpu max'
target/arm: Implement ID_DFR1
target/arm: Implement ID_MMFR5
target/arm: Sort KVM reads of AArch32 ID registers into encoding order
target/arm: Make cpregs 0, c0, c{3-15}, {0-7} correctly RAZ in v8
hw/arm/bcm2835_property: Add support for RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS
target/arm: Add cortex-a35

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/arm: Make boards pass base address to armv7m_load_kernel()

Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that

target/arm: Make boards pass base address to armv7m_load_kernel()

Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)

Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: A

Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
hw/misc: Add PWRON STRAP bit fields in GCR module
hw/arm/virt: impact of gic-version on max CPUs
hw/core/irq: remove unused 'qemu_irq_split' function
hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/exynos4210: Drop Exynos4210Irq struct
hw/arm/exynos4210: Put combiners into state struct
hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
hw/arm/exynos4210: Delete unused macro definitions
hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
hw/arm/exynos4210: Put external GIC into state struct
hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
hw/arm/exynos4210: Coalesce board_irqs and irq_table
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.

hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.203805-3-zongyuan.li@smartx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-block-2021-12-15' of git://repo.or.cz/qemu/armbru into staging

Block device patches patches for 2021-12-15

# gpg: Signature made Wed 15 Dec 2021 05:58:14 AM PST
# gpg:

Merge tag 'pull-block-2021-12-15' of git://repo.or.cz/qemu/armbru into staging

Block device patches patches for 2021-12-15

# gpg: Signature made Wed 15 Dec 2021 05:58:14 AM PST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]

* tag 'pull-block-2021-12-15' of git://repo.or.cz/qemu/armbru:
blockdev: Drop unused drive_get_next()
hw/arm/aspeed: Replace drive_get_next() by drive_get()
hw/arm/xilinx_zynq: Replace drive_get_next() by drive_get()
hw/arm/xlnx-zcu102: Replace drive_get_next() by drive_get()
hw/microblaze: Replace drive_get_next() by drive_get()
hw/arm/xlnx-versal-virt: Replace drive_get_next() by drive_get()
hw/arm/mcimx7d-sabre: Replace drive_get_next() by drive_get()
hw/arm/mcimx6ul-evk: Replace drive_get_next() by drive_get()
hw/arm/imx25_pdk: Replace drive_get_next() by drive_get()
hw/arm/versatilepb hw/arm/vexpress: Replace drive_get_next() by drive_get()
hw/arm/npcm7xx_boards: Replace drive_get_next() by drive_get()
hw: Replace trivial drive_get_next() by drive_get()
hw/sd/ssi-sd: Do not create SD card within controller's realize

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/sd/ssi-sd: Do not create SD card within controller's realize

ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.

Move it to the boards that create these devic

hw/sd/ssi-sd: Do not create SD card within controller's realize

ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.

Move it to the boards that create these devices. Prior art: commit
eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for
device "pl181".

The device remains not user-creatable, because its users should (and
do) wire up its GPIO chip-select line.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210901' into staging

* Refactor M-profile systick to use Clocks instead of system_clock_scale global
* clock: Provide builtin

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210901' into staging

* Refactor M-profile systick to use Clocks instead of system_clock_scale global
* clock: Provide builtin multiplier/divider
* Add A64FX processor model
* Enable MVE emulation in Cortex-M55
* hw: Add compat machines for 6.2
* hw/intc/arm_gicv3: Replace mis-used MEMTX_* constants by booleans
* hw/arm/raspi: Remove deprecated raspi2/raspi3 aliases

# gpg: Signature made Wed 01 Sep 2021 11:35:57 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210901: (51 commits)
arm: Remove system_clock_scale global
hw/timer/stellaris-gptm: Use Clock input instead of system_clock_scale
hw/arm/stellaris: Split stellaris-gptm into its own file
hw/arm/stellaris: Fix code style issues in GPTM code
hw/timer/armv7m_systick: Use clock inputs instead of system_clock_scale
hw/arm/msf2-soc: Wire up refclk
hw/arm/msf2: Use Clock input to MSF2_SOC instead of m3clk property
hw/arm/msf2_soc: Don't allocate separate MemoryRegions
hw/arm/stellaris: Wire sysclk up to armv7m
hw/arm/stellaris: split stellaris_sys_init()
hw/arm/nrf51: Wire up sysclk
hw/arm/stm32vldiscovery: Delete trailing blank line
hw/arm/stm32f405: Wire up sysclk and refclk
hw/arm/stm32f205: Wire up sysclk and refclk
hw/arm/stm32f100: Wire up sysclk and refclk
hw/arm: Don't allocate separate MemoryRegions in stm32 SoC realize
clock: Provide builtin multiplier/divider
hw/arm/mps2.c: Connect up armv7m clocks
armsse: Wire up systick cpuclk clock
hw/arm/armv7m: Create input clocks
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all th

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all the code that sets it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210812093356.1946-26-peter.maydell@linaro.org

show more ...

hw/timer/stellaris-gptm: Use Clock input instead of system_clock_scale

The stellaris-gptm timer currently uses system_clock_scale for one of
its timer modes where the timer runs at the CPU clock rat

hw/timer/stellaris-gptm: Use Clock input instead of system_clock_scale

The stellaris-gptm timer currently uses system_clock_scale for one of
its timer modes where the timer runs at the CPU clock rate. Make it
use a Clock input instead.

We don't try to make the timer handle changes in the clock frequency
while the downcounter is running. This is not a change in behaviour
from the previous system_clock_scale implementation -- we will pick
up the new frequency only when the downcounter hits zero. Handling
dynamic clock changes when the counter is running would require state
that the current gptm implementation doesn't have.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-25-peter.maydell@linaro.org

show more ...

hw/arm/stellaris: Split stellaris-gptm into its own file

The implementation of the Stellaris general purpose timer module
device stellaris-gptm is currently in the same source file as the
board mode

hw/arm/stellaris: Split stellaris-gptm into its own file

The implementation of the Stellaris general purpose timer module
device stellaris-gptm is currently in the same source file as the
board model. Split it out into its own source file in hw/timer.

Apart from the new file comment headers and the Kconfig and
meson.build changes, this is just code movement.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-24-peter.maydell@linaro.org

show more ...

hw/arm/stellaris: Fix code style issues in GPTM code

Fix the code style issues in the Stellaris general purpose timer
module code, so that when we move it to a different file in a
following patch ch

hw/arm/stellaris: Fix code style issues in GPTM code

Fix the code style issues in the Stellaris general purpose timer
module code, so that when we move it to a different file in a
following patch checkpatch doesn't complain.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Message-id: 20210812093356.1946-23-peter.maydell@linaro.org

show more ...

hw/arm/stellaris: Wire sysclk up to armv7m

Connect the sysclk to the armv7m object. This board's SoC does not
connect up the systick reference clock, so we don't need to connect a
refclk.

Signed-o

hw/arm/stellaris: Wire sysclk up to armv7m

Connect the sysclk to the armv7m object. This board's SoC does not
connect up the systick reference clock, so we don't need to connect a
refclk.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Message-id: 20210812093356.1946-18-peter.maydell@linaro.org

show more ...

hw/arm/stellaris: split stellaris_sys_init()

Currently the stellaris_sys_init() function creates the
TYPE_STELLARIS_SYS object, sets its properties, realizes it, maps its
MMIO region and connects it

hw/arm/stellaris: split stellaris_sys_init()

Currently the stellaris_sys_init() function creates the
TYPE_STELLARIS_SYS object, sets its properties, realizes it, maps its
MMIO region and connects its IRQ. In order to support wiring the
sysclk up to the armv7m object, we need to split this function apart,
because to connect the clock output of the STELLARIS_SYS object to
the armv7m object we need to create the STELLARIS_SYS object before
the armv7m object, but we can't wire up the IRQ until after we've
created the armv7m object.

Remove the stellaris_sys_init() function, and instead put the
create/configure/realize parts before we create the armv7m object and
the mmio/irq connection parts afterwards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Message-id: 20210812093356.1946-17-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix virtual irq number

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
* hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
* virt: Fix implementation of GPIO-based powerdown/shutdown mechanism
* Correct the encoding of MDCCSR_EL0 and DBGDSCRint
* hw/intc: Improve formatting of MEMTX_ERROR guest error message

# gpg: Signature made Fri 09 Jul 2021 17:09:10 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210709:
hw/intc: Improve formatting of MEMTX_ERROR guest error message
target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint
hw/arm/stellaris: Expand comment about handling of OLED chipselect
hw/gpio/pl061: Document a shortcoming in our implementation
hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset
hw/arm/virt: Make PL061 GPIO lines pulled low, not high
hw/gpio/pl061: Make pullup/pulldown of outputs configurable
hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
hw/gpio/pl061: Document the interface of this device
hw/gpio/pl061: Add tracepoints for register read and write
hw/gpio/pl061: Clean up read/write offset handling logic
hw/gpio/pl061: Convert DPRINTF to tracepoints
hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
tests/boot-serial-test: Add STM32VLDISCOVERY board testcase
docs/system: arm: Add stm32 boards description
stm32vldiscovery: Add the STM32VLDISCOVERY Machine
stm32f100: Add the stm32f100 SoC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/stellaris: Expand comment about handling of OLED chipselect

The stellaris board doesn't emulate the handling of the OLED
chipselect line correctly. Expand the comment describing this,
includ

hw/arm/stellaris: Expand comment about handling of OLED chipselect

The stellaris board doesn't emulate the handling of the OLED
chipselect line correctly. Expand the comment describing this,
including a sketch of the theoretical correct way to do it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Do not include cpu.h if it's not really necessary

Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.

Do not include cpu.h if it's not really necessary

Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210203' into staging

target-arm queue:
* hw/intc/arm_gic: Allow to use QTest without crashing
* hw/char/exynos4210_uart: Fix b

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210203' into staging

target-arm queue:
* hw/intc/arm_gic: Allow to use QTest without crashing
* hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
* hw/char/exynos4210_uart: Fix missing call to report ready for input
* hw/arm/smmuv3: Fix addr_mask for range-based invalidation
* hw/ssi/imx_spi: Fix various minor bugs
* hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
* hw/arm: Add missing Kconfig dependencies
* hw/arm: Display CPU type in machine description

# gpg: Signature made Wed 03 Feb 2021 10:16:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210203: (21 commits)
hw/arm: Display CPU type in machine description
hw/net/can: ZynqMP CAN device requires PTIMER
hw/arm/xlnx-versal: Versal SoC requires ZynqMP peripherals
hw/arm/xlnx-versal: Versal SoC requires ZDMA
hw/arm/exynos4210: Add missing dependency on OR_IRQ
hw/arm/stm32f405_soc: Add missing dependency on OR_IRQ
hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
hw/ssi: imx_spi: Correct tx and rx fifo endianness
hw/ssi: imx_spi: Correct the burst length > 32 bit transfer logic
hw/ssi: imx_spi: Round up the burst length to be multiple of 8
hw/ssi: imx_spi: Disable chip selects when controller is disabled
hw/ssi: imx_spi: Rework imx_spi_write() to handle block disabled
hw/ssi: imx_spi: Rework imx_spi_read() to handle block disabled
hw/ssi: imx_spi: Rework imx_spi_reset() to keep CONREG register value
hw/ssi: imx_spi: Remove pointless variable initialization
hw/ssi: imx_spi: Remove imx_spi_update_irq() in imx_spi_reset()
hw/ssi: imx_spi: Use a macro for number of chip selects supported
hw/arm/smmuv3: Fix addr_mask for range-based invalidation
hw/char/exynos4210_uart: Fix missing call to report ready for input
hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Display CPU type in machine description

Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.

Signed-of

hw/arm: Display CPU type in machine description

Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties
* provide powerdown/reset mechanism for secure firmware on 'virt' board
* hw/misc: Fix arith overflow in NPCM7XX PWM module
* target/arm: Replace magic value by MMU_DATA_LOAD definition
* configure: fix preadv errors on Catalina macOS with new XCode
* Various configure and other cleanups in preparation for iOS support
* hvf: Add hypervisor entitlement to output binaries (needed for Big Sur)
* Implement pvpanic-pci device
* Convert the CMSDK timer devices to the Clock framework

# gpg: Signature made Fri 29 Jan 2021 16:08:02 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210129-1: (46 commits)
hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS
arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
hw/arm/armsse: Use Clock to set system_clock_scale
tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input
hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input
hw/timer/cmsdk-apb-timer: Convert to use Clock input
hw/arm/stellaris: Create Clock input for watchdog
hw/arm/stellaris: Convert SSYS to QOM device
hw/arm/musca: Create and connect ARMSSE Clocks
hw/arm/mps2-tz: Create and connect ARMSSE Clocks
hw/arm/mps2: Create and connect SYSCLK Clock
hw/arm/mps2: Inline CMSDK_APB_TIMER creation
hw/arm/armsse: Wire up clocks
hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"
hw/watchdog/cmsdk-apb-watchdog: Add Clock input
hw/timer/cmsdk-apb-dualtimer: Add Clock input
hw/timer/cmsdk-apb-timer: Add Clock input
hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS

Now that the watchdog device uses its Clock input rather than being
passed the value of system_clock_scale at creation time, we can
rem

hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS

Now that the watchdog device uses its Clock input rather than being
passed the value of system_clock_scale at creation time, we can
remove the hack where we reset the STELLARIS_SYS at board creation
time to force it to set system_clock_scale. Instead it will be reset
at the usual point in startup and will inform the watchdog of the
clock frequency at that point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-26-peter.maydell@linaro.org
Message-id: 20210121190622.22000-26-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC

arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC device:
these properties are unused now that the devices rely on their Clock
inputs instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-24-peter.maydell@linaro.org
Message-id: 20210121190622.22000-24-peter.maydell@linaro.org

show more ...

hw/arm/stellaris: Create Clock input for watchdog

Create and connect the Clock input for the watchdog device on the
Stellaris boards. Because the Stellaris boards model the ability to
change the cl

hw/arm/stellaris: Create Clock input for watchdog

Create and connect the Clock input for the watchdog device on the
Stellaris boards. Because the Stellaris boards model the ability to
change the clock rate by programming PLL registers, we have to create
an output Clock on the ssys_state device and wire it up to the
watchdog.

Note that the old comment on ssys_calculate_system_clock() got the
units wrong -- system_clock_scale is in nanoseconds, not
milliseconds. Improve the commentary to clarify how we are
calculating the period.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-18-peter.maydell@linaro.org
Message-id: 20210121190622.22000-18-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/arm/stellaris: Convert SSYS to QOM device

Convert the SSYS code in the Stellaris boards (which encapsulates the
system registers) to a proper QOM device. This will provide us with
somewhere to p

hw/arm/stellaris: Convert SSYS to QOM device

Convert the SSYS code in the Stellaris boards (which encapsulates the
system registers) to a proper QOM device. This will provide us with
somewhere to put the output Clock whose frequency depends on the
setting of the PLL configuration registers.

This is a migration compatibility break for lm3s811evb, lm3s6965evb.

We use 3-phase reset here because the Clock will need to propagate
its value in the hold phase.

For the moment we reset the device during the board creation so that
the system_clock_scale global gets set; this will be removed in a
subsequent commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-17-peter.maydell@linaro.org
Message-id: 20210121190622.22000-17-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...