hw/ssi/xilinx_spips: Avoid variable length array

In the stripe8() function we use a variable length array; however
we know that the maximum length required is MAX_NUM_BUSSES. Use
a fixed-length arra

hw/ssi/xilinx_spips: Avoid variable length array

In the stripe8() function we use a variable length array; however
we know that the maximum length required is MAX_NUM_BUSSES. Use
a fixed-length array and an assert instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190328152635.2794-1-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180820' into staging

target-arm queue:
* Fix crash on conditional instruction in an IT block
* docs/generic-loader: mention U-

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180820' into staging

target-arm queue:
* Fix crash on conditional instruction in an IT block
* docs/generic-loader: mention U-Boot and Intel HEX executable formats
* hw/intc/arm_gicv3_its: downgrade error_report to warn_report in kvm_arm_its_reset
* imx_serial: Generate interrupt on receive data ready if enabled
* Fix various minor bugs in AArch32 Hyp related coprocessor registers
* Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
* Implement AArch32 ERET instruction
* hw/arm/virt: Add virt-3.1 machine type
* sdhci: add i.MX SD Stable Clock bit
* Remove now-obsolete MMIO request_ptr APIs
* hw/timer/m48t59: Move away from old_mmio accessors
* hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
* nvic: Expose NMI line
* hw/dma/pl080: cleanups and new features required for use in MPS boards

# gpg: Signature made Mon 20 Aug 2018 11:30:12 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180820: (25 commits)
hw/dma/pl080: Remove hw_error() if DMA is enabled
hw/dma/pl080: Correct bug in register address decode logic
hw/dma/pl080: Provide device reset function
hw/dma/pl080: Don't use CPU address space for DMA accesses
hw/dma/pl080: Support all three interrupt lines
hw/dma/pl080: Allow use as embedded-struct device
nvic: Expose NMI line
hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
hw/timer/m48t59: Move away from old_mmio accessors
hw/misc: Remove mmio_interface device
memory: Remove MMIO request_ptr APIs
hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code
sdhci: add i.MX SD Stable Clock bit
hw/arm/virt: Add virt-3.1 machine type
target/arm: Implement AArch32 ERET instruction
target/arm: Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
target/arm: Implement ESR_EL2/HSR for AArch32 and no-EL2
target/arm: Implement AArch32 Hyp FARs
target/arm: Implement AArch32 HVBAR
target/arm: Add missing .cp = 15 to HMAIR1 and HAMAIR1 regdefs
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code

We now support direct execution from MMIO regions in the
core memory subsystem. This means that we don't need to
have device-specific suppo

hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code

We now support direct execution from MMIO regions in the
core memory subsystem. This means that we don't need to
have device-specific support for it, and we can remove
the request_ptr handling from the Xilinx SPIPS device.
(It was broken anyway due to race conditions, and disabled
by default.)

This device is the only in-tree user of this API.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180626' into staging

target-arm queue:
* aspeed: set APB clocks correctly (fixes slowdown on palmetto)
* smmuv3: cache config

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180626' into staging

target-arm queue:
* aspeed: set APB clocks correctly (fixes slowdown on palmetto)
* smmuv3: cache config data and TLB entries
* v7m/v8m: support read/write from MPU regions smaller than 1K
* various: clean up logging/debug messages
* xilinx_spips: Make dma transactions as per dma_burst_size

# gpg: Signature made Tue 26 Jun 2018 17:55:46 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180626: (32 commits)
aspeed/timer: use the APB frequency from the SCU
aspeed: initialize the SCU controller first
aspeed/scu: introduce clock frequencies
hw/arm/smmuv3: Add notifications on invalidation
hw/arm/smmuv3: IOTLB emulation
hw/arm/smmuv3: Cache/invalidate config data
hw/arm/smmuv3: Fix translate error handling
target/arm: Handle small regions in get_phys_addr_pmsav8()
target/arm: Set page (region) size in get_phys_addr_pmsav7()
tcg: Support MMU protection regions smaller than TARGET_PAGE_SIZE
hw/arm/stellaris: Use HWADDR_PRIx to display register address
hw/arm/stellaris: Fix gptm_write() error message
hw/net/smc91c111: Use qemu_log_mask(UNIMP) instead of fprintf
hw/net/smc91c111: Use qemu_log_mask(GUEST_ERROR) instead of hw_error
hw/net/stellaris_enet: Use qemu_log_mask(GUEST_ERROR) instead of hw_error
hw/net/stellaris_enet: Fix a typo
hw/arm/stellaris: Use qemu_log_mask(UNIMP) instead of fprintf
hw/arm/omap: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
hw/arm/omap1: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
hw/i2c/omap_i2c: Use qemu_log_mask(UNIMP) instead of fprintf
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Make dma transactions as per dma_burst_size

Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
dma-burst-size property.

Signed-off-by: Sai Pavan Boddu <saipava@x

xilinx_spips: Make dma transactions as per dma_burst_size

Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
dma-burst-size property.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1529660880-30376-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180612-pull-request' into staging

usb: bug fix collection, doc update.

# gpg: Signature made Tue 12 Jun 2018 11:44:17 BST
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180612-pull-request' into staging

usb: bug fix collection, doc update.

# gpg: Signature made Tue 12 Jun 2018 11:44:17 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20180612-pull-request:
usb-mtp: Return error on suspicious TYPE_DATA packet from initiator
usb-hcd-xhci-test: add a test for ccid hotplug
usb-ccid: fix bus leak
object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence
bus: do not unref the added child bus on realize
usb/dev-mtp: Fix use of uninitialized values
usb: correctly handle Zero Length Packets
usb: update docs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence

A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add

object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence

A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add a reference to the target object, while
set_link() does.

Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.

Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180426' into staging

target-arm queue:
* xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
* timer/aspeed: fix v

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180426' into staging

target-arm queue:
* xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
* timer/aspeed: fix vmstate version id
* hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM
* hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate'
* hw/arm/highbank: don't make sysram 'nomigrate'
* hw/arm/raspi: Don't bother setting default_cpu_type
* PMU emulation: some minor bugfixes and preparation for
support of other events than just the cycle counter
* target/arm: Use v7m_stack_read() for reading the frame signature
* target/arm: Remove stale TODO comment
* arm: always start from first_cpu when registering loader cpu reset callback
* device_tree: Increase FDT_MAX_SIZE to 1 MiB

# gpg: Signature made Thu 26 Apr 2018 11:46:31 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180426:
xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
timer/aspeed: fix vmstate version id
hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM
hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate'
hw/arm/highbank: don't make sysram 'nomigrate'
hw/arm/raspi: Don't bother setting default_cpu_type
target/arm: Make PMOVSCLR and PMUSERENR 64 bits wide
target/arm: Fix bitmask for PMCCFILTR writes
target/arm: Allow EL change hooks to do IO
target/arm: Add pre-EL change hooks
target/arm: Support multiple EL change hooks
target/arm: Fetch GICv3 state directly from CPUARMState
target/arm: Mask PMU register writes based on PMCR_EL0.N
target/arm: Treat PMCCNTR as alias of PMCCNTR_EL0
target/arm: Check PMCNTEN for whether PMCCNTR is enabled
target/arm: Use v7m_stack_read() for reading the frame signature
target/arm: Remove stale TODO comment
arm: always start from first_cpu when registering loader cpu reset callback
device_tree: Increase FDT_MAX_SIZE to 1 MiB

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo

SNOOP_NONE state handle is moved above in the if ladder, as it's same
as SNOOP_STRIPPING during data cycles.

Signed-off-by: Sai Pavan

xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo

SNOOP_NONE state handle is moved above in the if ladder, as it's same
as SNOOP_STRIPPING during data cycles.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 1524119244-1240-1-git-send-email-saipava@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180301' into staging

target-arm queue:
* update MAINTAINERS for Alistair's new email address
* add Arm v8.2 FP16 arithmetic ex

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180301' into staging

target-arm queue:
* update MAINTAINERS for Alistair's new email address
* add Arm v8.2 FP16 arithmetic extension for linux-user
* implement display connector emulation for vexpress board
* xilinx_spips: Enable only two slaves when reading/writing with stripe
* xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands
* hw: register: Run post_write hook on reset

# gpg: Signature made Thu 01 Mar 2018 11:22:46 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180301: (42 commits)
MAINTAINERS: Update my email address
linux-user: Report AArch64 FP16 support via hwcap bits
target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU
arm/translate-a64: add all single op FP16 to handle_fp_1src_half
arm/translate-a64: implement simd_scalar_three_reg_same_fp16
arm/translate-a64: add all FP16 ops in simd_scalar_pairwise
arm/translate-a64: add FP16 FMOV to simd_mod_imm
arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16
arm/helper.c: re-factor rsqrte and add rsqrte_f16
arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16
arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16
arm/translate-a64: add FP16 FRECPE
arm/helper.c: re-factor recpe and add recepe_f16
arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16
arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16
arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16
arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16
arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16
arm/translate-a64: initial decode for simd_two_reg_misc_fp16
arm/translate-a64: add FP16 x2 ops for simd_indexed
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands

Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode
for matching what is expected by Micron (Numonyx) flashes

xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands

Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode
for matching what is expected by Micron (Numonyx) flashes (the default target
flash type of the QSPI).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Enable only two slaves when reading/writing with stripe

Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and
chip selects are enabled (e.g reading/writing with s

xilinx_spips: Enable only two slaves when reading/writing with stripe

Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and
chip selects are enabled (e.g reading/writing with stripe).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180125' into staging

target-arm queue:
* target/arm: Fix address truncation in 64-bit pagetable walks
* i.MX: Fix FEC/ENET rec

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180125' into staging

target-arm queue:
* target/arm: Fix address truncation in 64-bit pagetable walks
* i.MX: Fix FEC/ENET receive functions
* target/arm: preparatory refactoring for SVE emulation
* hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
* hw/intc/arm_gic: Fix C_RPR value on idle priority
* hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
* hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
* hw/arm/virt: Check that the CPU realize method succeeded
* sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
* xilinx_spips: Correct usage of an uninitialized local variable
* pl110: Implement vertical compare/next base interrupts

# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
pl110: Implement vertical compare/next base interrupts
xilinx_spips: Correct usage of an uninitialized local variable
sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
hw/arm/virt: Check that the CPU realize method succeeded
hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
hw/intc/arm_gic: Fix C_RPR value on idle priority
hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
target/arm: Simplify fp_exception_el for user-only
target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
target/arm: Move cpu_get_tb_cpu_state out of line
target/arm: Add ARM_FEATURE_SVE
vmstate: Add VMSTATE_UINT64_SUB_ARRAY
target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
target/arm: Change the type of vfp.regs
target/arm: Use pointers in neon tbl helper
target/arm: Use pointers in neon zip/uzp helpers
target/arm: Use pointers in crypto helpers
target/arm: Mark disas_set_insn_syndrome inline
i.MX: Fix FEC/ENET receive funtions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Correct usage of an uninitialized local variable

Coverity found that the variable tx_rx in the function
xilinx_spips_flush_txfifo was being used uninitialized (CID 1383841). This
patch

xilinx_spips: Correct usage of an uninitialized local variable

Coverity found that the variable tx_rx in the function
xilinx_spips_flush_txfifo was being used uninitialized (CID 1383841). This
patch corrects this by always initializing tx_rx to zeros.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20180124215708.30400-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QemuMutex tracing improvements (Alex)
* ram_addr_t optimization (David)
* SCSI fixes (Fam, Stefan, me)
* do {} while (

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QemuMutex tracing improvements (Alex)
* ram_addr_t optimization (David)
* SCSI fixes (Fam, Stefan, me)
* do {} while (0) fixes (Eric)
* KVM fix for PMU (Jan)
* memory leak fixes from ASAN (Marc-André)
* migration fix for HPET, icount, loadvm (Maria, Pavel)
* hflags fixes (me, Tao)
* block/iscsi uninitialized variable (Peter L.)
* full support for GMainContexts in character devices (Peter Xu)
* more boot-serial-test (Thomas)
* Memory leak fix (Zhecheng)

# gpg: Signature made Tue 16 Jan 2018 14:15:45 GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (51 commits)
scripts/analyse-locks-simpletrace.py: script to analyse lock times
util/qemu-thread-*: add qemu_lock, locked and unlock trace events
cpu: flush TB cache when loading VMState
block/iscsi: fix initialization of iTask in iscsi_co_get_block_status
find_ram_offset: Align ram_addr_t allocation on long boundaries
find_ram_offset: Add comments and tracing
cpu_physical_memory_sync_dirty_bitmap: Another alignment fix
checkpatch: Enforce proper do/while (0) style
maint: Fix macros with broken 'do/while(0); ' usage
tests: Avoid 'do/while(false); ' in vhost-user-bridge
chardev: Clean up previous patch indentation
chardev: Use goto/label instead of do/break/while(0)
mips: Tweak location of ';' in macros
net: Drop unusual use of do { } while (0);
irq: fix memory leak
cpus: unify qemu_*_wait_io_event
icount: fixed saving/restoring of icount warp timers
scripts/qemu-gdb/timers.py: new helper to dump timer state
scripts/qemu-gdb: add simple tcg lock status helper
target-i386: update hflags on Hypervisor.framework
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

maint: Fix macros with broken 'do/while(0); ' usage

The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end w

maint: Fix macros with broken 'do/while(0); ' usage

The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.

The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.

Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'origin/master' into HEAD

Resolve conflicts around apb.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20171213' into staging

target-arm queue:
* xilinx_spips: set reset values correctly
* MAINTAINERS: fix an email address
* hw/di

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20171213' into staging

target-arm queue:
* xilinx_spips: set reset values correctly
* MAINTAINERS: fix an email address
* hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
* nvic: Make systick banked for v8M
* refactor get_phys_addr() so we can return the right format PAR
for ATS operations
* implement v8M TT instruction
* fix some minor v8M bugs
* Implement reset for GICv3 ITS
* xlnx-zcu102: Add support for the ZynqMP QSPI

# gpg: Signature made Wed 13 Dec 2017 18:01:31 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20171213: (43 commits)
xilinx_spips: Use memset instead of a for loop to zero registers
xilinx_spips: Set all of the reset values
xilinx_spips: Update the QSPI Mod ID reset value
MAINTAINERS: replace the unavailable email address
hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
nvic: Make systick banked
nvic: Make nvic_sysreg_ns_ops work with any MemoryRegion
target/arm: Extend PAR format determination
target/arm: Remove fsr argument from get_phys_addr() and arm_tlb_fill()
target/arm: Ignore fsr from get_phys_addr() in do_ats_write()
target/arm: Use ARMMMUFaultInfo in deliver_fault()
target/arm: Convert get_phys_addr_pmsav8() to not return FSC values
target/arm: Convert get_phys_addr_pmsav7() to not return FSC values
target/arm: Convert get_phys_addr_pmsav5() to not return FSC values
target/arm: Convert get_phys_addr_lpae() to not return FSC values
target/arm: Convert get_phys_addr_v6() to not return FSC values
target/arm: Convert get_phys_addr_v5() to not return FSC values
target/arm: Remove fsr argument from arm_ld*_ptw()
target/arm: Provide fault type enum and FSR conversion functions
target/arm: Implement TT instruction
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Use memset instead of a for loop to zero registers

Use memset() instead of a for loop to zero all of the registers.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Revie

xilinx_spips: Use memset instead of a for loop to zero registers

Use memset() instead of a for loop to zero all of the registers.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c076e907f355923864cb1afde31b938ffb677778.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Set all of the reset values

Following the ZynqMP register spec let's ensure that all reset values
are set.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: F

xilinx_spips: Set all of the reset values

Following the ZynqMP register spec let's ensure that all reset values
are set.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 19836f3e0a298b13343c5a59c87425355e7fd8bd.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Update the QSPI Mod ID reset value

Update the reset value to match the latest ZynqMP register spec.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD F

xilinx_spips: Update the QSPI Mod ID reset value

Update the reset value to match the latest ZynqMP register spec.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c03e51d041db7f055596084891aeb1e856e32b9f.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Add support for the ZynqMP Generic QSPI

Add support for the Zynq Ultrascale MPSoc Generic QSPI.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Igl

xilinx_spips: Add support for the ZynqMP Generic QSPI

Add support for the Zynq Ultrascale MPSoc Generic QSPI.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-13-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Don't set TX FIFO UNDERFLOW at cmd done

Don't set TX FIFO UNDERFLOW interrupt after transmitting the commands.
Also update interrupts after reading out the interrupt status.

Signed-of

xilinx_spips: Don't set TX FIFO UNDERFLOW at cmd done

Don't set TX FIFO UNDERFLOW interrupt after transmitting the commands.
Also update interrupts after reading out the interrupt status.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-12-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Add support for 4 byte addresses in the LQSPI

Add support for 4 byte addresses in the LQSPI and correct LQSPI_CFG_SEP_BUS.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com

xilinx_spips: Add support for 4 byte addresses in the LQSPI

Add support for 4 byte addresses in the LQSPI and correct LQSPI_CFG_SEP_BUS.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-11-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

xilinx_spips: Add support for zero pumping

Add support for zero pumping according to the transfer size register.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E.

xilinx_spips: Add support for zero pumping

Add support for zero pumping according to the transfer size register.

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-10-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...