/linux/Documentation/devicetree/bindings/pci/ |
H A D | faraday,ftpci100.yaml | 18 The host controller appear on the PCI bus with vendor ID 0x159b (Faraday 19 Technology) and product ID 0x4321. 34 interrupt-map-mask = <0xf800 0 0 7>; 36 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ 37 <0x480 [all...] |
H A D | nvidia,tegra20-pcie.txt | 27 - cell 0 specifies the bus and device numbers of the root port: 30 - cell 1 denotes the upper 32 address bits and should be 0 45 - 0x81000000: I/O memory region 46 - 0x82000000: non-prefetchable memory region 47 - 0xc2000000: prefetchable memory region 73 - pinctrl-0: phandle for the default/active state of pin configurations. 104 - If lanes 0 to 3 are used: 150 - Root port 0 uses 4 lanes, root port 1 is unused. 158 "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes. 171 reg = <0x8000300 [all...] |
/linux/Documentation/devicetree/bindings/gpu/ |
H A D | nvidia,gk20a.txt | 46 reg = <0x0 0x57000000 0x0 0x01000000>, 47 <0x0 0x58000000 0x0 0x01000000>; 64 reg = <0x [all...] |
/linux/arch/arm/mach-pxa/ |
H A D | addr-map.h | 8 #define PXA_CS0_PHYS 0x00000000 9 #define PXA_CS1_PHYS 0x04000000 10 #define PXA_CS2_PHYS 0x08000000 11 #define PXA_CS3_PHYS 0x0C000000 12 #define PXA_CS4_PHYS 0x10000000 13 #define PXA_CS5_PHYS 0x14000000 15 #define PXA300_CS0_PHYS 0x00000000 /* PXA300/PXA310 _only_ */ 16 #define PXA300_CS1_PHYS 0x30000000 /* PXA300/PXA310 _only_ */ 17 #define PXA3xx_CS2_PHYS 0x10000000 18 #define PXA3xx_CS3_PHYS 0x1400000 [all...] |
H A D | pxa-regs.h | 14 #define UNCACHED_PHYS_0 0xfe000000 15 #define UNCACHED_PHYS_0_SIZE 0x00100000 20 * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff 21 * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5fffff [all...] |
/linux/arch/arm/boot/dts/gemini/ |
H A D | gemini.dtsi | 23 pinctrl-0 = <&pflash_default_pins>; 31 reg = <0x40000000 0x1000>; 39 offset = <0x0c>; 41 mask = <0xC0000000>; 49 pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, 159 reg = <0x41000000 0x1000>; 168 reg = <0x42000000 0x10 [all...] |
/linux/Documentation/devicetree/bindings/memory-controllers/ |
H A D | nvidia,tegra20-mc.yaml | 48 const: 0 69 reg = <0x7000f000 0x400>, /* Controller registers */ 70 <0x58000000 0x02000000>; /* GART aperture */ 74 interrupts = <0 77 4>; 76 #iommu-cells = <0>;
|
/linux/arch/arm/mach-omap2/ |
H A D | omap24xx.h | 19 #define L4_24XX_BASE 0x48000000 20 #define L4_WK_243X_BASE 0x49000000 21 #define L3_24XX_BASE 0x68000000 24 #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) 25 #define OMAP24XX_IVA_INTC_BASE 0x40000000 28 #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) 29 #define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) 30 #define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) 32 #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) 33 #define OMAP2420_SMS_BASE 0x6800800 [all...] |
H A D | iomap.h | 33 #define OMAP2_L3_IO_OFFSET 0x90000000 36 #define OMAP2_L4_IO_OFFSET 0xb2000000 39 #define OMAP4_L3_IO_OFFSET 0xb4000000 42 #define AM33XX_L4_WK_IO_OFFSET 0xb5000000 45 #define OMAP4_L3_PER_IO_OFFSET 0xb1100000 48 #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ 58 #define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ 61 #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa00000 [all...] |
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8-ss-img.dtsi | 8 #clock-cells = <0>; 15 #clock-cells = <0>; 24 ranges = <0x58000000 0x0 0x58000000 0x1000000>; 27 reg = <0x58100000 0x8000 [all...] |
/linux/Documentation/devicetree/bindings/display/ti/ |
H A D | ti,omap-dss.txt | 50 reg = <0x58000000 0x80>; 61 reg = <0x58001000 0x1000>; 70 reg = <0x58006000 0x200>, 71 <0x58006200 0x100>, 72 <0x5800630 [all...] |
/linux/arch/arm64/boot/dts/renesas/ |
H A D | r9a09g011-v2mevk2.dts | 33 #size-cells = <0>; 35 port@0 { 36 reg = <0>; 57 reg = <0x0 0x58000000 0x0 0x28000000>; 62 reg = <0x1 0x8000000 [all...] |
/linux/drivers/net/wireless/mediatek/mt76/mt7915/ |
H A D | mmio.c | 21 [INT_SOURCE_CSR] = 0xd7010, 22 [INT_MASK_CSR] = 0xd7014, 23 [INT1_SOURCE_CSR] = 0xd7088, 24 [INT1_MASK_CSR] = 0xd708c, 25 [INT_MCU_CMD_SOURCE] = 0xd51f0, 26 [INT_MCU_CMD_EVENT] = 0x3108, 27 [WFDMA0_ADDR] = 0xd4000, 28 [WFDMA0_PCIE1_ADDR] = 0xd8000, 29 [WFDMA_EXT_CSR_ADDR] = 0xd7000, 30 [CBTOP1_PHY_END] = 0x77fffff [all...] |
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap5.dtsi | 45 #size-cells = <0>; 47 cpu0: cpu@0 { 50 reg = <0x0>; 69 reg = <0x1>; 115 reg = <0 0x40300000 0 0x20000>; /* 128k */ 122 reg = <0 0x4821100 [all...] |
H A D | dra7.dtsi | 60 reg = <0x0 0x48211000 0x0 0x1000>, 61 <0x0 0x48212000 0x0 0x2000>, 62 <0x0 0x4821400 [all...] |
/linux/drivers/gpu/drm/gma500/ |
H A D | oaktrail_device.c | 32 return 0; in oaktrail_output_init() 39 #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF 51 if (gma_power_begin(dev, 0)) { in oaktrail_set_brightness() 69 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); in oaktrail_set_brightness() 100 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); in oaktrail_backlight_init() 106 return 0; in oaktrail_backlight_init() 125 struct psb_pipe *p = ®s->pipe[0]; in oaktrail_save_display_registers() 165 for (i = 0; i < 256; i++) in oaktrail_save_display_registers() 204 PSB_WVDC32(0, PP_CONTROL); in oaktrail_save_display_registers() 208 } while (pp_stat & 0x8000000 in oaktrail_save_display_registers() [all...] |
/linux/drivers/net/wireless/mediatek/mt76/mt7921/ |
H A D | pci.c | 17 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7961), 19 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7922), 21 { PCI_DEVICE(PCI_VENDOR_ID_ITTIM, 0x7922), 23 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0608), 25 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0616), 27 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7920), 70 { 0x820d0000, 0x30000, 0x10000 }, /* WF_LMAC_TOP (WF_WTBLON) */ in __mt7921_reg_addr() 71 { 0x820ed00 in __mt7921_reg_addr() [all...] |
/linux/arch/arm/boot/dts/st/ |
H A D | stm32h743.dtsi | 54 #clock-cells = <0>; 56 clock-frequency = <0>; 60 #clock-cells = <0>; 66 #clock-cells = <0>; 68 clock-frequency = <0>; 75 reg = <0x40000c00 0x400>; 82 #size-cells = <0>; 84 reg = <0x40002400 0x40 [all...] |
H A D | stm32mp131.dtsi | 16 #size-cells = <0>; 18 cpu0: cpu@0 { 21 reg = <0>; 43 #size-cells = <0>; 44 linaro,optee-channel-id = <0>; 47 reg = <0x14>; 52 reg = <0x16>; 57 reg = <0x17>; 61 #size-cells = <0>; 63 scmi_reg11: regulator@0 { [all...] |
/linux/crypto/ |
H A D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x0301010 [all...] |
/linux/arch/arm64/boot/dts/nvidia/ |
H A D | tegra186.dtsi | 20 reg = <0x0 0x00100000 0x0 0xf000>, 21 <0x0 0x0010f000 0x0 0x1000>; 27 reg = <0x0 0x220000 [all...] |
H A D | tegra132.dtsi | 22 reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ 23 <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ 24 <0x0 0x0200000 [all...] |
/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra20.dtsi | 17 memory@0 { 19 reg = <0 0>; 24 reg = <0x40000000 0x40000>; 27 ranges = <0 0x40000000 0x40000>; 30 reg = <0x400 0x3fc0 [all...] |
/linux/drivers/scsi/sym53c8xx_2/ |
H A D | sym_defs.h | 45 #define FE_LED0 (1<<0) 88 #define ISCON 0x10 /* connected to scsi */ 89 #define CRST 0x08 /* force reset */ 90 #define IARB 0x02 /* immediate arbitration */ 93 #define SDU 0x80 /* cmd: disconnect will raise error */ 94 #define CHM 0x40 /* sta: chained mode */ 95 #define WSS 0x08 /* sta: wide scsi send [W]*/ 96 #define WSR 0x01 /* sta: wide scsi received [W]*/ 99 #define EWS 0x08 /* cmd: enable wide scsi [W]*/ 100 #define ULTRA 0x8 [all...] |
/linux/drivers/bus/ |
H A D | ti-sysc.c | 41 #define DIS_SGX BIT(0) 177 writew_relaxed(value & 0xffff, ddata->module_va + offset); in sysc_write() 180 if (ddata->offsets[SYSC_REVISION] >= 0 && in sysc_write() 201 if (ddata->offsets[SYSC_REVISION] >= 0 && in sysc_read() 223 if (offset < 0) in sysc_read_revision() 224 return 0; in sysc_read_revision() 233 if (offset < 0) in sysc_read_sysconfig() 234 return 0; in sysc_read_sysconfig() 243 if (offset < 0) in sysc_read_sysstatus() 244 return 0; in sysc_read_sysstatus() [all...] |