Include sysemu/reset.h a lot less

In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qe

Include sysemu/reset.h a lot less

In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>

show more ...

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts res

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]

show more ...

ppc4xx_pci: convert SysBus init method to a realize method

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org

ppc4xx_pci: convert SysBus init method to a realize method

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

pci: Rename root bus initialization functions for clarity

pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus()
are misleadingly named. They're not used for initializing *any*

pci: Rename root bus initialization functions for clarity

pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus()
are misleadingly named. They're not used for initializing *any* PCI bus,
but only for a root PCI bus.

Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead
created with a direct qbus_create_inplace() (see pci_bridge_initfn()).

This patch renames the functions to make it clear they're only used for
a root bus.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

show more ...

pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices

Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFA

pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices

Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable

cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user.

qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable

cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was
supposed to be a temporary measure.

When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.

Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.

Except for code comments, changes were generated using the
following Coccinelle patch:

@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)

@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}

@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}

@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)

Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

ppc4xx: replace debug printf with trace points

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.drop

ppc4xx: replace debug printf with trace points

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

ppc: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-b

ppc: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org

show more ...

hw/pci/ppc4xx_pci.c: Remove unused pci4xx_cfgaddr_read/write/ops

The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.

Signed-off

hw/pci/ppc4xx_pci.c: Remove unused pci4xx_cfgaddr_read/write/ops

The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

show more ...

savevm: Remove all the unneeded version_minimum_id_old (ppc)

After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
w

savevm: Remove all the unneeded version_minimum_id_old (ppc)

After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:

.fields = (VMStateField []) {
and
.fields = (VMStateField []) {

Change all the combinations to:

.fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>

show more ...

pci-host: Consistently set cannot_instantiate_with_device_add_yet

Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work. Arguably, these bridges sho

pci-host: Consistently set cannot_instantiate_with_device_add_yet

Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work. Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.

Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless. We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.

It's already set for Bonito, Grackle, i440FX and Raven. Document why.

Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

show more ...

hw/p*: pass owner to memory_region_init* functions

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

memory: add owner argument to initialization functions

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move PCI bridges to hw/pci-* or hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it n

hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

pci: Allow PCI bus creation interfaces to specify the type of bus

No change to any types.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.c

pci: Allow PCI bus creation interfaces to specify the type of bus

No change to any types.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `fin

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

exec: move include files to include/exec/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pci: update all users to look in pci/

update all users so we can remove the makefile hack.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

pci: Tidy up PCI host bridges

Adopt the QOM parent field name and enforce QOM-style access via casts.
Don't just typedef PCIHostState, either use it directly or embed it.

Signed-off-by: Andreas Fär

pci: Tidy up PCI host bridges

Adopt the QOM parent field name and enforce QOM-style access via casts.
Don't just typedef PCIHostState, either use it directly or embed it.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

pci: Derive PCI host bridges from TYPE_PCI_HOST_BRIDGE

Use PCIHostState and PCI_HOST_BRIDGE() where appropriate.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <ali

pci: Derive PCI host bridges from TYPE_PCI_HOST_BRIDGE

Use PCIHostState and PCI_HOST_BRIDGE() where appropriate.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

ppc4xx_pci: QOM'ify ppc4xx PCI host bridge

Introduce type constant and cast macro. Avoid accessing its parent field
directly.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. T

ppc4xx_pci: QOM'ify ppc4xx PCI host bridge

Introduce type constant and cast macro. Avoid accessing its parent field
directly.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

pci: Make host bridge TypeInfos const

During the QOM migration they were amended with further info but this is
no longer the case. All static TypeInfos can be const these days.

Signed-off-by: Andre

pci: Make host bridge TypeInfos const

During the QOM migration they were amended with further info but this is
no longer the case. All static TypeInfos can be const these days.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

qom: Unify type registration

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add pr

qom: Unify type registration

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...