qdev: Remove hex8/32/64 property types

Replace them with uint8/32/64.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbon

qdev: Remove hex8/32/64 property types

Replace them with uint8/32/64.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

show more ...

g364fb: QOM cast cleanup

Introduce a type constant, use QOM casts and rename the parent field and
prepare for QOM realize.

Signed-off-by: Andreas Färber <afaerber@suse.de>

devices: Associate devices to their logical category

The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-

devices: Associate devices to their logical category

The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

memory: add owner argument to initialization functions

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

console: add device link to QemuConsoles

So it is possible to figure which qemu console displays which device.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

console: add GraphicHwOps

Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

console: simplify screendump

Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface con

console: simplify screendump

Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file. Done.

No console switching needed. No special support code in the
gfx card emulation needed. Zap it all. Also move ppm_save
out of the vga code and next to the qmp_screendump function.

For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles. I wanna finish the console cleanup before setting
new qapi interfaces into stone.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>

show more ...

hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

console: stop using DisplayState in gfx hardware emulation

Use QemuConsole instead. Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.

Signed-off-by: Gerd Hoffmann <kraxel@

console: stop using DisplayState in gfx hardware emulation

Use QemuConsole instead. Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `fin

hw: include hw header files with full paths

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Make all static TypeInfos const

Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is

Make all static TypeInfos const

Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.

Fix the documented QOM examples:

sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h

Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:

sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c

This also avoids to piggy-back these changes onto real functional
changes or other refactorings.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

ui: move files to ui/ and include/ui/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

console: untangle gfx & txt updates

Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).

Add flags to displaystate indicating whenever text mode displ

console: untangle gfx & txt updates

Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).

Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.

Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.

This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are

Rename target_phys_addr_t to hwaddr

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

g364fb: g364fb_screen_dump(): add error handling

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

console: vga_hw_screen_dump_ptr: take Error argument

All devices that register a screen dump callback via
graphic_console_init() are updated.

The new argument is not used in this commit. Error hand

console: vga_hw_screen_dump_ptr: take Error argument

All devices that register a screen dump callback via
graphic_console_init() are updated.

The new argument is not used in this commit. Error handling will
be added to each device individually later.

This change is a preparation to convert the screendump command
to the QAPI.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

show more ...

optimize screendump for the common non-switch case

switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the c

optimize screendump for the common non-switch case

switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

qom: Unify type registration

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add pr

qom: Unify type registration

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

memory: change dirty getting API to take a size

Instead of each device knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwir

memory: change dirty getting API to take a size

Instead of each device knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...

qdev: register all types natively through QEMU Object Model

This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touch

qdev: register all types natively through QEMU Object Model

This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.

The first step was a sed-based addition of the parent type to the subclass
registration functions.

The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.

Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.

We are almost fully converted to QOM after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

sysbus: apic: ioapic: convert to QEMU Object Model

This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitiv

sysbus: apic: ioapic: convert to QEMU Object Model

This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

memory: change dirty setting APIs to take a size

Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwi

memory: change dirty setting APIs to take a size

Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...

vmstate, memory: decouple vmstate from memory API

Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDe

vmstate, memory: decouple vmstate from memory API

Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.

Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.

Signed-off-by: Avi Kivity <avi@redhat.com>

show more ...

sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()

Signed-off-by: Avi Kivity <avi@redhat.com>

Move graphic-related coalesced MMIO flushes to affected device models

This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit futu

Move graphic-related coalesced MMIO flushes to affected device models

This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit future per-device
coalesced MMIO rings.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

show more ...