hw/misc/mps2-scc: Support configurable number of OSCCLK values

Currently the MPS2 SCC device implements a fixed number of OSCCLK
values (3). The variant of this device in the MPS3 AN524 board has 6

hw/misc/mps2-scc: Support configurable number of OSCCLK values

Currently the MPS2 SCC device implements a fixed number of OSCCLK
values (3). The variant of this device in the MPS3 AN524 board has 6
OSCCLK values. Switch to using a PROP_ARRAY, which allows board code
to specify how large the OSCCLK array should be as well as its
values.

With a variable-length property array, the SCC no longer specifies
default values for the OSCCLKs, so we must set them explicitly in the
board code. This defaults are actually incorrect for the an521 and
an505; we will correct this bug in a following patch.

This is a migration compatibility break for all the mps boards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-3-peter.maydell@linaro.org

show more ...

hw/arm/mps2-tz: Make SYSCLK frequency board-specific

The AN524 has a different SYSCLK frequency from the AN505 and AN521;
make the SYSCLK frequency a field in the MPS2TZMachineClass rather
than a co

hw/arm/mps2-tz: Make SYSCLK frequency board-specific

The AN524 has a different SYSCLK frequency from the AN505 and AN521;
make the SYSCLK frequency a field in the MPS2TZMachineClass rather
than a compile-time constant so we can support the AN524.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties
* provide powerdown/reset mechanism for secure firmware on 'virt' board
* hw/misc: Fix arith overflow in NPCM7XX PWM module
* target/arm: Replace magic value by MMU_DATA_LOAD definition
* configure: fix preadv errors on Catalina macOS with new XCode
* Various configure and other cleanups in preparation for iOS support
* hvf: Add hypervisor entitlement to output binaries (needed for Big Sur)
* Implement pvpanic-pci device
* Convert the CMSDK timer devices to the Clock framework

# gpg: Signature made Fri 29 Jan 2021 16:08:02 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210129-1: (46 commits)
hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS
arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
hw/arm/armsse: Use Clock to set system_clock_scale
tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input
hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input
hw/timer/cmsdk-apb-timer: Convert to use Clock input
hw/arm/stellaris: Create Clock input for watchdog
hw/arm/stellaris: Convert SSYS to QOM device
hw/arm/musca: Create and connect ARMSSE Clocks
hw/arm/mps2-tz: Create and connect ARMSSE Clocks
hw/arm/mps2: Create and connect SYSCLK Clock
hw/arm/mps2: Inline CMSDK_APB_TIMER creation
hw/arm/armsse: Wire up clocks
hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"
hw/watchdog/cmsdk-apb-watchdog: Add Clock input
hw/timer/cmsdk-apb-dualtimer: Add Clock input
hw/timer/cmsdk-apb-timer: Add Clock input
hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC

arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC device:
these properties are unused now that the devices rely on their Clock
inputs instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-24-peter.maydell@linaro.org
Message-id: 20210121190622.22000-24-peter.maydell@linaro.org

show more ...

hw/arm/mps2-tz: Create and connect ARMSSE Clocks

Create and connect the two clocks needed by the ARMSSE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé

hw/arm/mps2-tz: Create and connect ARMSSE Clocks

Create and connect the two clocks needed by the ARMSSE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-15-peter.maydell@linaro.org
Message-id: 20210121190622.22000-15-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"

While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provid

hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"

While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provide both at once. We want the final name of the main
input Clock to be "MAINCLK", following the hardware name.
Unfortunately creating an input Clock with a name X creates an
under-the-hood QOM property X; for "MAINCLK" this clashes with the
existing UINT32 property of that name.

Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the
MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be
deleted.

Commit created with:
perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-11-peter.maydell@linaro.org
Message-id: 20210121190622.22000-11-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic_cast_assert() documentation (Eduardo Habkost)
* Ensure objects using QEMU_ALIGNED are properly aligned (Richard Henderson)

QOM cleanups (Eduardo Habkost):
* Rename some constants
* Simplify parameters of OBJECT_DECLARE* macros
* Additional DECLARE_*CHECKER* usage
* Additional OBJECT_DECLARE_TYPE usage
* Additional OBJECT_DECLARE_SIMPLE_TYPE usage

# gpg: Signature made Fri 18 Sep 2020 21:45:29 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
Use OBJECT_DECLARE_TYPE when possible
qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE
scripts/codeconverter: Update to latest version
target/s390x: Set instance_align on S390CPU TypeInfo
target/riscv: Set instance_align on RISCVCPU TypeInfo
target/ppc: Set instance_align on PowerPCCPU TypeInfo
target/arm: Set instance_align on CPUARM TypeInfo
qom: Allow objects to be allocated with increased alignment
qom: Correct error values in two contracts
qom: Clean up object_property_get_enum()'s error value
qom: Correct object_class_dynamic_cast_assert() documentation
sifive: Use DECLARE_*CHECKER* macros
sifive: Move QOM typedefs and add missing includes
sifive_u: Rename memmap enum constants
sifive_e: Rename memmap enum constants

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use OBJECT_DECLARE_TYPE when possible

This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDecl

Use OBJECT_DECLARE_TYPE when possible

This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habk

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-07-v2' into staging

Error reporting patches patches for 2020-07-07

# gpg: Signature made Fri 10 Jul 2020 14:24:42 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-07-v2' into staging

Error reporting patches patches for 2020-07-07

# gpg: Signature made Fri 10 Jul 2020 14:24:42 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2020-07-07-v2: (53 commits)
xen: Use ERRP_GUARD()
nbd: Use ERRP_GUARD()
virtio-9p: Use ERRP_GUARD()
fw_cfg: Use ERRP_GUARD()
pflash: Use ERRP_GUARD()
sd: Use ERRP_GUARD()
scripts: Coccinelle script to use ERRP_GUARD()
error: New macro ERRP_GUARD()
hmp: Ignore Error objects where the return value suffices
qdev: Ignore Error objects where the return value suffices
qemu-img: Ignore Error objects where the return value suffices
error: Avoid error_propagate() after migrate_add_blocker()
qapi: Purge error_propagate() from QAPI core
qapi: Smooth visitor error checking in generated code
qapi: Smooth another visitor error checking pattern
block/parallels: Simplify parallels_open() after previous commit
error: Reduce unnecessary error propagation
error: Eliminate error_propagate() manually
error: Eliminate error_propagate() with Coccinelle, part 2
error: Eliminate error_propagate() with Coccinelle, part 1
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qom: Put name parameter before value / visitor parameter

The object_property_set_FOO() setters take property name and value in
an unusual order:

void object_property_set_FOO(Object *obj, FOO_TY

qom: Put name parameter before value / visitor parameter

The object_property_set_FOO() setters take property name and value in
an unusual order:

void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)

Having to pass value before name feels grating. Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200623' into staging

target-arm queue:
* util/oslib-posix : qemu_init_exec_dir implementation for Mac
* target/arm: Last parts

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200623' into staging

target-arm queue:
* util/oslib-posix : qemu_init_exec_dir implementation for Mac
* target/arm: Last parts of neon decodetree conversion
* hw/arm/virt: Add 5.0 HW compat props
* hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status
* mps2: Add CMSDK APB watchdog, FPGAIO block, S2I devices and I2C devices
* mps2: Add some unimplemented-device stubs for audio and GPIO
* mps2-tz: Use the ARM SBCon two-wire serial bus interface
* target/arm: Check supported KVM features globally (not per vCPU)
* tests/qtest/arm-cpu-features: Add feature setting tests
* arm/virt: Add memory hot remove support

# gpg: Signature made Tue 23 Jun 2020 12:38:31 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200623: (42 commits)
arm/virt: Add memory hot remove support
tests/qtest/arm-cpu-features: Add feature setting tests
target/arm: Check supported KVM features globally (not per vCPU)
hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface
hw/arm/mps2: Add audio I2S interface as unimplemented device
hw/arm/mps2: Add I2C devices
hw/arm/mps2: Add SPI devices
hw/arm/mps2: Map the FPGA I/O block
hw/arm/mps2: Add CMSDK AHB GPIO peripherals as unimplemented devices
hw/arm/mps2: Add CMSDK APB watchdog device
hw/arm/mps2: Rename CMSDK AHB peripheral region
hw/arm/mps2: Document CMSDK/FPGA APB subsystem sections
hw/arm: Use TYPE_VERSATILE_I2C instead of hardcoded string
hw/i2c: Add header for ARM SBCon two-wire serial bus interface
hw/i2c/versatile_i2c: Add SCL/SDA definitions
hw/i2c/versatile_i2c: Add definitions for register addresses
hw/watchdog/cmsdk-apb-watchdog: Add trace event for lock status
target/arm: Remove dead code relating to SABA and UABA
target/arm: Remove unnecessary gen_io_end() calls
target/arm: Move some functions used only in translate-neon.inc.c to that file
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface

From 'Application Note AN521', chapter 4.7:

The SMM implements four SBCon serial modules:

One SBCon module for use by the Color

hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interface

From 'Application Note AN521', chapter 4.7:

The SMM implements four SBCon serial modules:

One SBCon module for use by the Color LCD touch interface.
One SBCon module to configure the audio controller.
Two general purpose SBCon modules, that connect to the
Expansion headers J7 and J8, are intended for use with the
V2C-Shield1 which provide an I2C interface on the headers.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-15-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: Convert bus-less devices to qdev_realize() with Coccinelle

All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:

// only correct for bus-less @dev!

qdev: Convert bus-less devices to qdev_realize() with Coccinelle

All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:

// only correct for bus-less @dev!

@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);

@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);

@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);

Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>

show more ...

sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1

I'm converting from qdev_set_parent_bus()/realize to qdev_realize();
recent commit "qdev: Convert uses of qdev_set_parent_bus() with

sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1

I'm converting from qdev_set_parent_bus()/realize to qdev_realize();
recent commit "qdev: Convert uses of qdev_set_parent_bus() with
Coccinelle" explains why.

sysbus_init_child_obj() is a wrapper around
object_initialize_child_with_props() and qdev_set_parent_bus(). It
passes no properties.

Convert sysbus_init_child_obj()/realize to object_initialize_child()/
qdev_realize().

Coccinelle script:

@@
expression parent, name, size, type, errp;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, &child, size, type);
+ sysbus_init_child_XXX(parent, name, &child, size, type);
...
- object_property_set_bool(OBJECT(&child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(&child), errp);

@@
expression parent, name, size, type, errp;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
...
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);

@@
expression parent, name, size, type;
expression child;
expression dev;
expression expr;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
...
dev = DEVICE(child);
... when != dev = expr;
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);

@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)

@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-48-armbru@redhat.com>

show more ...

sysbus: Convert to sysbus_realize() etc. with Coccinelle

Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle sc

sysbus: Convert to sysbus_realize() etc. with Coccinelle

Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

@@
expression dev, errp;
@@
- qdev_realize(DEVICE(dev), NULL, errp);
+ sysbus_realize(SYS_BUS_DEVICE(dev), errp);

@@
expression sysbus_dev, dev, errp;
@@
+ sysbus_dev = SYS_BUS_DEVICE(dev);
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);
- sysbus_dev = SYS_BUS_DEVICE(dev);

@@
expression sysbus_dev, dev, errp;
expression expr;
@@
sysbus_dev = SYS_BUS_DEVICE(dev);
... when != dev = expr;
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);

@@
expression dev, errp;
@@
- qdev_realize_and_unref(DEVICE(dev), NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

@@
expression dev, errp;
@@
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]

show more ...

sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2

The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that

sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2

The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use
something else instead, mostly to keep future commits simpler.

Coccinelle script:

@@
expression parent, propname, type;
expression child;
type T;
T proxy;
@@
(
sysbus_init_child_obj(parent, propname, &child, sizeof(child), type)
|
sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
|
- sysbus_init_child_obj(parent, propname, child, sizeof(proxy), type)
+ sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
)

This script is *unsound*: for each change we need to verify the
@childsize argument stays the same. I did.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-44-armbru@redhat.com>

show more ...

sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1

The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that

sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1

The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use
sizeof(child_type) instead, mostly to keep future commits simpler.

Coccinelle script:

@@
expression parent, propname, type;
type T;
T child;
@@
- sysbus_init_child_obj(parent, propname, &child, sizeof(T), type)
+ sysbus_init_child_obj(parent, propname, &child, sizeof(child), type)

@@
expression parent, propname, type;
type T;
T *child;
@@
- sysbus_init_child_obj(parent, propname, child, sizeof(T), type)
+ sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-42-armbru@redhat.com>

show more ...

qom: Less verbose object_initialize_child()

All users of object_initialize_child() pass the obvious child size
argument. Almost all pass &error_abort and no properties. Tiresome.

Rename object_in

qom: Less verbose object_initialize_child()

All users of object_initialize_child() pass the obvious child size
argument. Almost all pass &error_abort and no properties. Tiresome.

Rename object_initialize_child() to
object_initialize_child_with_props() to free the name. New
convenience wrapper object_initialize_child() automates the size
argument, and passes &error_abort and no properties.

Rename object_initialize_childv() to
object_initialize_child_with_propsv() for consistency.

Convert callers with this Coccinelle script:

@@
expression parent, propname, type;
expression child, size;
symbol error_abort;
@@
- object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, size, type, &error_abort, NULL)

@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, type)

@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, &child, type)

@@
expression parent, propname, type;
expression child, size, err;
expression list props;
@@
- object_initialize_child(parent, propname, child, size, type, err, props)
+ object_initialize_child_with_props(parent, propname, child, size, type, err, props)

Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
[Rebased: machine opentitan is new (commit fe0fe4735e7)]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-37-armbru@redhat.com>

show more ...

qdev: Convert uses of qdev_create() with Coccinelle

This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this se

qdev: Convert uses of qdev_create() with Coccinelle

This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.

Coccinelle script:

@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);

@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);

@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);

@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200504' into staging

target-arm queue:
* Start of conversion of Neon insns to decodetree
* versal board: support SD and RTC
*

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200504' into staging

target-arm queue:
* Start of conversion of Neon insns to decodetree
* versal board: support SD and RTC
* Implement ARMv8.2-TTS2UXN
* Make VQDMULL undefined when U=1
* Some minor code cleanups

# gpg: Signature made Mon 04 May 2020 13:32:08 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200504: (39 commits)
target/arm: Move gen_ function typedefs to translate.h
target/arm: Convert Neon 3-reg-same VMUL, VMLA, VMLS, VSHL to decodetree
target/arm: Convert Neon 3-reg-same VQADD/VQSUB to decodetree
target/arm: Convert Neon 3-reg-same comparisons to decodetree
target/arm: Convert Neon 3-reg-same VMAX/VMIN to decodetree
target/arm: Convert Neon 3-reg-same logic ops to decodetree
target/arm: Convert Neon 3-reg-same VADD/VSUB to decodetree
target/arm: Convert Neon 'load/store single structure' to decodetree
target/arm: Convert Neon 'load single structure to all lanes' to decodetree
target/arm: Convert Neon load/store multiple structures to decodetree
target/arm: Convert VFM[AS]L (scalar) to decodetree
target/arm: Convert V[US]DOT (scalar) to decodetree
target/arm: Convert VCMLA (scalar) to decodetree
target/arm: Convert VFM[AS]L (vector) to decodetree
target/arm: Convert V[US]DOT (vector) to decodetree
target/arm: Convert VCADD (vector) to decodetree
target/arm: Convert VCMLA (vector) to decodetree
target/arm: Add stubs for AArch32 Neon decodetree
target/arm: Don't allow Thumb Neon insns without FEATURE_NEON
target/arm/translate-vfp.inc.c: Remove duplicate simd_r32 check
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/mps2-tz: Use TYPE_IOTKIT instead of hardcoded string

By using the TYPE_* definitions for devices, we can:
- quickly find where devices are used with 'git-grep'
- easily rename a device (one

hw/arm/mps2-tz: Use TYPE_IOTKIT instead of hardcoded string

By using the TYPE_* definitions for devices, we can:
- quickly find where devices are used with 'git-grep'
- easily rename a device (one-line change).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200428154650.21991-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...