Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Allow built-in drivers, not just modular drivers, to

Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)

- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)

- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)

- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)

- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)

Power control:

- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)

PCIe native device hotplug:

- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)

- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)

- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)

Virtualization:

- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)

- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)

- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)

Endpoint framework:

- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)

- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)

Native PCIe controller drivers:

- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)

- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)

- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)

APM X-Gene PCIe controller driver:

- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)

- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)

Broadcom STB PCIe controller driver:

- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)

Cadence PCIe controller driver:

- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)

Freescale i.MX6 PCIe controller driver:

- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)

- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)

- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)

- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)

- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)

Intel VMD host bridge driver:

- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)

Qualcomm PCIe controller driver:

- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)

- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)

- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)

- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)

- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)

- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)

- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)

Rockchip PCIe controller driver:

- Drop unused PCIe Message routing and code definitions (Hans Zhang)

- Remove several unused header includes (Hans Zhang)

- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)

- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)

Rockchip DesignWare PCIe controller driver:

- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)

- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)

Sophgo PCIe controller driver:

- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)

Synopsys DesignWare PCIe controller driver:

- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"

* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...

show more ...

Merge branch 'pci/controller/msi-parent'

- Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency
in altera (fixes an unused variable), designware-host, mediatek,
mediatek-gen3,

Merge branch 'pci/controller/msi-parent'

- Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency
in altera (fixes an unused variable), designware-host, mediatek,
mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri
Slaby, Arnd Bergmann)

- Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek,
mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma,
xilinx-nwl from using pci_msi_create_irq_domain() to using
msi_create_parent_irq_domain() instead; this makes the interrupt
controller per-PCI device, allows dynamic allocation of vectors after
initialization, and allows support of IMS (Nam Cao)

- Convert vmd to using lock guards to tidy the code (Nam Cao)

* pci/controller/msi-parent:
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
PCI: plda: Switch to msi_create_parent_irq_domain()
PCI: xilinx: Switch to msi_create_parent_irq_domain()
PCI: xilinx-nwl: Switch to msi_create_parent_irq_domain()
PCI: xilinx-xdma: Switch to msi_create_parent_irq_domain()
PCI: rcar-host: Switch to msi_create_parent_irq_domain()
PCI: mediatek: Switch to msi_create_parent_irq_domain()
PCI: mediatek-gen3: Switch to msi_create_parent_irq_domain()
PCI: iproc: Switch to msi_create_parent_irq_domain()
PCI: brcmstb: Switch to msi_create_parent_irq_domain()
PCI: altera-msi: Switch to msi_create_parent_irq_domain()
PCI: aardvark: Switch to msi_create_parent_irq_domain()
PCI: mobiveil: Switch to msi_create_parent_irq_domain()
PCI: dwc: Switch to msi_create_parent_irq_domain()
PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()

show more ...

PCI: mediatek-gen3: Switch to msi_create_parent_irq_domain()

Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.

Signed-off-by: Nam Ca

PCI: mediatek-gen3: Switch to msi_create_parent_irq_domain()

Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.

Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message & fixed merge conflict]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/bfbd2e375269071b69e1aa85e629ee4b7c99518f.1750858083.git.namcao@linutronix.de

show more ...

PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()

All irq_domain functions now accept fwnode instead of of_node. But many
PCI controllers still extract dev to of_node and then of_node

PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()

All irq_domain functions now accept fwnode instead of of_node. But many
PCI controllers still extract dev to of_node and then of_node to fwnode.

Instead, clean this up and simply use the dev_fwnode() helper to extract
fwnode directly from dev. Internally, it still does dev => of_node =>
fwnode steps, but it's now hidden from the users.

In the case of altera, this also removes an unused 'node' variable that is
only used when CONFIG_OF is enabled:

drivers/pci/controller/pcie-altera.c: In function 'altera_pcie_init_irq_domain':
drivers/pci/controller/pcie-altera.c:855:29: error: unused variable 'node' [-Werror=unused-variable]
855 | struct device_node *node = dev->of_node;

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # altera
[bhelgaas: squash together, rebase to precede msi-parent]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250521163329.2137973-1-arnd@kernel.org
Link: https://patch.msgid.link/20250611104348.192092-16-jirislaby@kernel.org
Link: https://patch.msgid.link/20250723065907.1841758-1-jirislaby@kernel.org

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:

- Co

Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:

- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.

- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"

* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...

show more ...

PCI: Switch to irq_domain_create_linear()

irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It tak

PCI: Switch to irq_domain_create_linear()

irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.

Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).

[ tglx: Fix up subject prefix and convert the new instance in
dwc/pcie-amd-mdb.c ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-30-jirislaby@kernel.org

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'v6.15-rc1' into x86/cpu, to refresh the branch with upstream changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.15-rc1' into x86/asm, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmerm

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Enable Configuration RRS SV, which makes device readi

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)

- Log debug messages about reset methods being used (Bjorn Helgaas)

- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)

- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)

- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)

Resource management:

- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)

- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)

- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)

- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)

- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)

- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)

- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)

- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)

- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)

ASPM:

- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)

Power management:

- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)

Power control:

- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)

- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)

- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)

- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)

Bandwidth control:

- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)

- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)

Hotplug:

- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)

- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)

- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)

- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)

- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)

- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)

- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)

Virtualization:

- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)

DOE:

- Expose supported DOE features via sysfs (Alistair Francis)

- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)

Endpoint framework:

- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)

- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)

- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)

- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)

- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)

- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)

Altera PCIe controller driver:

- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)

AMD MDB PCIe controller driver:

- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)

Broadcom STB PCIe controller driver:

- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)

- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)

- Add BCM2712 support and DT updates (Stanimir Varbanov)

- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)

- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)

- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)

- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)

- Make const read-only arrays static (Colin Ian King)

Cadence PCIe endpoint driver:

- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)

Freescale i.MX6 PCIe controller driver:

- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)

- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)

Freescale Layerscape PCIe controller driver:

- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)

- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)

HiSilicon STB PCIe controller driver:

- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)

Intel Gateway PCIe controller driver:

- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)

Intel VMD host bridge driver:

- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)

MediaTek PCIe Gen3 controller driver:

- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)

- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)

Qualcomm PCIe controller driver:

- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)

- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)

- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)

- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)

- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)

- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)

- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)

Rockchip DesignWare PCIe controller driver:

- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)

Synopsys DesignWare PCIe controller driver:

- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)

- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)

- Add Rockchip support for DWC debugfs features (Niklas Cassel)

- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)

- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)

- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)

TI J721E PCIe driver:

- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)

TI Keystone PCIe controller driver:

- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)

Xilinx Versal CPM PCIe controller driver:

- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)

- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)

- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)

Miscellaneous:

- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)

- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"

* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...

show more ...

Merge branch 'pci/controller/mediatek'

- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi)

- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program
host br

Merge branch 'pci/controller/mediatek'

- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi)

- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program
host bridge memory aperture to this syscon node (Lorenzo Bianconi)

* pci/controller/mediatek:
PCI: mediatek-gen3: Fix inconsistent indentation
PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoC
dt-bindings: PCI: mediatek-gen3: Add mediatek,pbus-csr phandle array property
PCI: mediatek-gen3: Remove leftover mac_reset assert for Airoha EN7581 SoC

show more ...