Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an

Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now

- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22

- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications

- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it

There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.

New board support is not that exciting, with a total of 33 newly added
machines here:

- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042

- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95

- Two newly added ASPEED BMC based motherboards, and one that got
removed

- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs

- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1

- A set-top box based on Amlogic meson-gxm

Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"

* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...

show more ...

Merge tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch

Merge tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory

* tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add maskrom button to NanoPi R5S + R5C
arm64: dts: rockchip: Drop regulator-compatible property on rk3399
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2
arm64: dts: rockchip: Move mipi_out node on rk3399 haikou demo dtso
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
arm64: dts: rockchip: Simplify VOP port definition on rk3328
arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards
arm64: dts: rockchip: Move dsi address+size-cells from SoC to px30 boards
arm64: dts: rockchip: Fix UART DMA support for RK3528
arm64: dts: rockchip: Add reset button to NanoPi R5S
arm64: dts: rockchip: Add rtc0 alias for NanoPi R5S + R5C
arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro
arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro
arm64: dts: rockchip: Fix pinctrl node names for RK3528
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar
...

Link: https://lore.kernel.org/r/11552292.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards: ROC-RK3588S-PC, Luckfox Omni3576, Radxa Rock 5T,
Sakura Pi RK3308B

Merge tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards: ROC-RK3588S-PC, Luckfox Omni3576, Radxa Rock 5T,
Sakura Pi RK3308B - all of them have the used soc in their name.

New overlays: RockPro64 screen, optional Sige5 Wifi/BT module,
ethernet-switch addon for Jaguar.

Added peripherals on rk3528 (spi, power-domain controller, gpu)
and sdio controller on rk3576.

DSI display support for the Gameforce-ACE handheld, a fix for the
cover-detection (closed/open) on the PineNote, camera support for
the Haikou Video Demo overlay on PX30 Ringneck as well as a number
of other newly enabled peripherals on a number of boards.

* tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Enable eMMC HS200 mode on Radxa E20C
arm64: dts: rockchip: Add bluetooth support to ArmSoM Sige7
arm64: dts: rockchip: enable PCIe on ROCK 4D
arm64: dts: rockchip: Enable HDMI receiver on CM3588
arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: Enable GPU on Radxa E20C
arm64: dts: rockchip: Add GPU node for RK3528
arm64: dts: rockchip: support camera module on Haikou Video Demo on PX30 Ringneck
arm64: dts: rockchip: add label to first port of ISP on px30
arm64: dts: rockchip: fix endpoint dtc warning for PX30 ISP
arm64: dts: rockchip: Add power controller for RK3528
arm64: dts: rockchip: enable USB on Sige5
arm64: dts: rockchip: add overlay for the WiFi/BT module on Sige5 v1.2
arm64: dts: rockchip: add version-independent WiFi/BT nodes on Sige5
arm64: dts: rockchip: add SDIO controller on RK3576
arm64: dts: rockchip: Enable gpu on rk3576-evb1-v10
arm64: dts: rockchip: Update the PinePhone Pro panel description
...

Link: https://lore.kernel.org/r/15465458.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards

The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on

arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards

The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various rk3399 based boards.

This fixes the following DTB validation warnings:

unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro

Add the description of the front/user camera (OV8858) on the PinePhone Pro
to the device dts file.
It receives commands over SC

arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro

Add the description of the front/user camera (OV8858) on the PinePhone Pro
to the device dts file.
It receives commands over SCCB, an I2C-compatible protocol, at
I2C address 0x36 and transmits data over CSI-MIPI.
I confirmed this address experimentally.

The pin control mapping was again extracted from the PinePhone Pro
schematic v1.0 as well as the RK3399 datasheet revision 1.8.

Table 2-3 in section 2.8 of the RK3399 datasheet contains the mapping
of IO functions for the SoC pins. Page 52 shows GPIO1_A4, page 54 shows
GPIO2_B4.

For the reset (RESET) signal:
page 11 quadrant D2 | p.18 q.B3-4 | p.18 q.C2
RK3399_E.R28 -> GPIO1_A4 -> Camera2_RST -> MIPI_RST1 -> OV8858.12

For the powerdown (PWDN) signal:
page 9 quadrants D4-5 | p.18 q.B2
RK3399_L.F31 -> GPIO2_B4 -> DVP_PDN0_H -> OV8858.14

Helped-by: Dragan Simic <dsimic@manjaro.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Link: https://lore.kernel.org/r/20250620-camera-v4-4-0201a8ed5fae@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro

Add the description of the rear/world camera (IMX258) on the PinePhone Pro
to the device dts file.
It receives comma

arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro

Add the description of the rear/world camera (IMX258) on the PinePhone Pro
to the device dts file.
It receives commands on the I2C Bus 1 at address 0x1a and transmits data
over CSI-MIPI.

The I2C address for IMX258 can be found in the IMX258-0AQH5 Software
Reference Manual, page 24, section 2.3.1: 0b0011010 = 0x1a.
Section 3 indicates the module has 4 pairs of data lines. While 4-lane
mode is nominal, 2-lane mode should also be supported.

The pin muxing info was extracted from the PinePhone Pro schematic v1.0
as well as the RK3399 datasheet revision 1.8.

Table 2-3 in section 2.8 of the RK3399 datasheet contains the mapping
of IO functions for the SoC pins. Page 52 shows GPIO1_A0, page 54 shows
GPIO2_D4.

For I2C power, the PinePhone Pro schematic page 11 quadrants A4 and A5:
RK3399_J.AA8 and RK3399_J.Y8 get power from vcaa1v8_codec, so turn it on

The IMX258 also uses the following regulators, expected by its driver:
- vana (2.8V analog), called AVDD2V8_DVP on P.18 q.C1 and derived from
VCC1V8_S3 on P.13 q.B2
- vdig (1.2V digital core), called DVDD_DVP on P.18 q.C1 and shown on
P.18 q.D3 to be equivalent to VCC1V2_DVP derived from VCC3V3_SYS on
P.13 q.B3. Note that this regulator's voltage is inconsistently
labeled either 1.2V or 1.5V

RK3399_J.AG1 is GPIO4_A1/I2C1_SDA, RK3399_J.Y6 is GPIO4_A2/I2C1_SCL
This is the default pinctrl "i2c1_xfer" for i2c1 from rk3399-base.

For the reset (RESET) signal:
page 11 quadrant D2 | p.18 q.C3-4 | p.18 q.C2
RK3399_E.R25 -> GPIO1_A0 -> Camera_RST -> MIPI_RST0 -> IMX258.12

For the powerdown (PWDN) signal:
page 11 quadrants B4-5 | p.18 q.C2
RK3399_G.AF8 -> GPIO2_D4 -> DVP_PDN1_H -> IMX258.14

Helped-by: Dragan Simic <dsimic@manjaro.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Link: https://lore.kernel.org/r/20250620-camera-v4-3-0201a8ed5fae@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Update the PinePhone Pro panel description

Fix a few issues in the panel section of the PinePhone Pro DTS:
- add the second part of the Himax HX8394 LCD panel controller

arm64: dts: rockchip: Update the PinePhone Pro panel description

Fix a few issues in the panel section of the PinePhone Pro DTS:
- add the second part of the Himax HX8394 LCD panel controller
compatible
- as proposed by Diederik de Haas, reuse the mipi_out and ports
definitions from rk3399-base.dtsi instead of redefining them
- add a pinctrl for the LCD_RST signal for LCD1, derived from
LCD1_RST, which is on GPIO4_D1, as documented on pages 11
and 16 of the PinePhone Pro schematic

Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250619-dtb_fixes-v3-1-9cb02ddd8ce4@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'ovl.fixes'

Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.

Signed-off-by: Christian Brauner <brauner@kernel.org>

Merge tag 'iommu-updates-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git

Merge with Joerg's tree for dependencies on the next patches.

====================

Merge tag 'iommu-updates-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git

Merge with Joerg's tree for dependencies on the next patches.

======================================
IOMMU Updates for Linux v6.13:

Including:

- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.

- New IOMMU driver for RISC-V.

- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.

- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.

- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.

- S390 IOMMU:
- Implement support for blocking domain.

- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.

- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of

Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:

- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.

- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.

- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.

- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.

- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.

- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.

- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.

A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.

As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"

* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...

show more ...

Merge branch 'for-6.13/multitouch-v2' into for-linus

- code cleanup for mt_set_mode() (Dmitry Torokhov)

Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.13

This release was mainly about new drivers, there's a very large batch o

Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.13

This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:

- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.

show more ...

Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

- Al

Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.

- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.

- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).

- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.

- ACPI documentation for PIIX4.

New Features:

- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.

Deprecated Features:

- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.

New Hardware Support:

- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)

show more ...

ASoc: simple-mux: Allow to specify an idle-state

Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:

This series adds support for the idle-state property from the mux
framework to the

ASoc: simple-mux: Allow to specify an idle-state

Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:

This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.

show more ...

Merge tag 'loongarch-kvm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.13

1. Add iocsr and mmio bus simulation in kernel.
2

Merge tag 'loongarch-kvm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.13

1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.

show more ...