1 // SPDX-License-Identifier: GPL-2.0
2 /* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch
3 *
4 * This is a sparsely documented chip, the only viable documentation seems
5 * to be a patched up code drop from the vendor that appear in various
6 * GPL source trees.
7 *
8 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
9 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
10 * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
11 * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
12 * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
13 */
14
15 #include <linux/bitops.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_bridge.h>
18 #include <linux/if_vlan.h>
19 #include <linux/interrupt.h>
20 #include <linux/irqdomain.h>
21 #include <linux/irqchip/chained_irq.h>
22 #include <linux/of_irq.h>
23 #include <linux/regmap.h>
24
25 #include "realtek.h"
26
27 #define RTL8366RB_PORT_NUM_CPU 5
28 #define RTL8366RB_NUM_PORTS 6
29 #define RTL8366RB_PHY_NO_MAX 4
30 #define RTL8366RB_PHY_ADDR_MAX 31
31
32 /* Switch Global Configuration register */
33 #define RTL8366RB_SGCR 0x0000
34 #define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0)
35 #define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4)
36 #define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3)
37 #define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0)
38 #define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1)
39 #define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2)
40 #define RTL8366RB_SGCR_MAX_LENGTH_16000 RTL8366RB_SGCR_MAX_LENGTH(0x3)
41 #define RTL8366RB_SGCR_EN_VLAN BIT(13)
42 #define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14)
43
44 /* Port Enable Control register */
45 #define RTL8366RB_PECR 0x0001
46
47 /* Switch per-port learning disablement register */
48 #define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002
49
50 /* Security control, actually aging register */
51 #define RTL8366RB_SECURITY_CTRL 0x0003
52
53 #define RTL8366RB_SSCR2 0x0004
54 #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
55
56 /* Port Mode Control registers */
57 #define RTL8366RB_PMC0 0x0005
58 #define RTL8366RB_PMC0_SPI BIT(0)
59 #define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1)
60 #define RTL8366RB_PMC0_PROBE BIT(2)
61 #define RTL8366RB_PMC0_DIS_BISR BIT(3)
62 #define RTL8366RB_PMC0_ADCTEST BIT(4)
63 #define RTL8366RB_PMC0_SRAM_DIAG BIT(5)
64 #define RTL8366RB_PMC0_EN_SCAN BIT(6)
65 #define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7
66 #define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7)
67 #define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10
68 #define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10)
69 #define RTL8366RB_PMC0_SDSMODE_SHIFT 13
70 #define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13)
71 #define RTL8366RB_PMC1 0x0006
72
73 /* Port Mirror Control Register */
74 #define RTL8366RB_PMCR 0x0007
75 #define RTL8366RB_PMCR_SOURCE_PORT(a) (a)
76 #define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f
77 #define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4)
78 #define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0
79 #define RTL8366RB_PMCR_MIRROR_RX BIT(8)
80 #define RTL8366RB_PMCR_MIRROR_TX BIT(9)
81 #define RTL8366RB_PMCR_MIRROR_SPC BIT(10)
82 #define RTL8366RB_PMCR_MIRROR_ISO BIT(11)
83
84 /* bits 0..7 = port 0, bits 8..15 = port 1 */
85 #define RTL8366RB_PAACR0 0x0010
86 /* bits 0..7 = port 2, bits 8..15 = port 3 */
87 #define RTL8366RB_PAACR1 0x0011
88 /* bits 0..7 = port 4, bits 8..15 = port 5 */
89 #define RTL8366RB_PAACR2 0x0012
90 #define RTL8366RB_PAACR_SPEED_10M 0
91 #define RTL8366RB_PAACR_SPEED_100M 1
92 #define RTL8366RB_PAACR_SPEED_1000M 2
93 #define RTL8366RB_PAACR_FULL_DUPLEX BIT(2)
94 #define RTL8366RB_PAACR_LINK_UP BIT(4)
95 #define RTL8366RB_PAACR_TX_PAUSE BIT(5)
96 #define RTL8366RB_PAACR_RX_PAUSE BIT(6)
97 #define RTL8366RB_PAACR_AN BIT(7)
98
99 /* bits 0..7 = port 0, bits 8..15 = port 1 */
100 #define RTL8366RB_PSTAT0 0x0014
101 /* bits 0..7 = port 2, bits 8..15 = port 3 */
102 #define RTL8366RB_PSTAT1 0x0015
103 /* bits 0..7 = port 4, bits 8..15 = port 5 */
104 #define RTL8366RB_PSTAT2 0x0016
105
106 #define RTL8366RB_POWER_SAVING_REG 0x0021
107
108 /* Spanning tree status (STP) control, two bits per port per FID */
109 #define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */
110 #define RTL8366RB_STP_STATE_DISABLED 0x0
111 #define RTL8366RB_STP_STATE_BLOCKING 0x1
112 #define RTL8366RB_STP_STATE_LEARNING 0x2
113 #define RTL8366RB_STP_STATE_FORWARDING 0x3
114 #define RTL8366RB_STP_MASK GENMASK(1, 0)
115 #define RTL8366RB_STP_STATE(port, state) \
116 ((state) << ((port) * 2))
117 #define RTL8366RB_STP_STATE_MASK(port) \
118 RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK)
119
120 /* CPU port control reg */
121 #define RTL8366RB_CPU_CTRL_REG 0x0061
122 #define RTL8366RB_CPU_PORTS_MSK 0x00FF
123 /* Disables inserting custom tag length/type 0x8899 */
124 #define RTL8366RB_CPU_NO_TAG BIT(15)
125 #define RTL8366RB_CPU_TAG_SIZE 4
126
127 #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */
128 #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */
129 #define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */
130
131 #define RTL8366RB_RESET_CTRL_REG 0x0100
132 #define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0)
133 #define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1)
134
135 #define RTL8366RB_CHIP_ID_REG 0x0509
136 #define RTL8366RB_CHIP_ID_8366 0x5937
137 #define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A
138 #define RTL8366RB_CHIP_VERSION_MASK 0xf
139
140 /* PHY registers control */
141 #define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000
142 #define RTL8366RB_PHY_CTRL_READ BIT(0)
143 #define RTL8366RB_PHY_CTRL_WRITE 0
144 #define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001
145 #define RTL8366RB_PHY_INT_BUSY BIT(0)
146 #define RTL8366RB_PHY_EXT_BUSY BIT(4)
147 #define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002
148 #define RTL8366RB_PHY_EXT_CTRL_REG 0x8010
149 #define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011
150 #define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012
151
152 #define RTL8366RB_PHY_REG_MASK 0x1f
153 #define RTL8366RB_PHY_PAGE_OFFSET 5
154 #define RTL8366RB_PHY_PAGE_MASK (0xf << 5)
155 #define RTL8366RB_PHY_NO_OFFSET 9
156 #define RTL8366RB_PHY_NO_MASK (0x1f << 9)
157
158 /* VLAN Ingress Control Register 1, one bit per port.
159 * bit 0 .. 5 will make the switch drop ingress frames without
160 * VID such as untagged or priority-tagged frames for respective
161 * port.
162 * bit 6 .. 11 will make the switch drop ingress frames carrying
163 * a C-tag with VID != 0 for respective port.
164 */
165 #define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
166 #define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
167
168 /* VLAN Ingress Control Register 2, one bit per port.
169 * bit0 .. bit5 will make the switch drop all ingress frames with
170 * a VLAN classification that does not include the port is in its
171 * member set.
172 */
173 #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
174
175 /* LED control registers */
176 #define RTL8366RB_LED_BLINKRATE_REG 0x0430
177 #define RTL8366RB_LED_BLINKRATE_MASK 0x0007
178 #define RTL8366RB_LED_BLINKRATE_28MS 0x0000
179 #define RTL8366RB_LED_BLINKRATE_56MS 0x0001
180 #define RTL8366RB_LED_BLINKRATE_84MS 0x0002
181 #define RTL8366RB_LED_BLINKRATE_111MS 0x0003
182 #define RTL8366RB_LED_BLINKRATE_222MS 0x0004
183 #define RTL8366RB_LED_BLINKRATE_446MS 0x0005
184
185 #define RTL8366RB_LED_CTRL_REG 0x0431
186 #define RTL8366RB_LED_OFF 0x0
187 #define RTL8366RB_LED_DUP_COL 0x1
188 #define RTL8366RB_LED_LINK_ACT 0x2
189 #define RTL8366RB_LED_SPD1000 0x3
190 #define RTL8366RB_LED_SPD100 0x4
191 #define RTL8366RB_LED_SPD10 0x5
192 #define RTL8366RB_LED_SPD1000_ACT 0x6
193 #define RTL8366RB_LED_SPD100_ACT 0x7
194 #define RTL8366RB_LED_SPD10_ACT 0x8
195 #define RTL8366RB_LED_SPD100_10_ACT 0x9
196 #define RTL8366RB_LED_FIBER 0xa
197 #define RTL8366RB_LED_AN_FAULT 0xb
198 #define RTL8366RB_LED_LINK_RX 0xc
199 #define RTL8366RB_LED_LINK_TX 0xd
200 #define RTL8366RB_LED_MASTER 0xe
201 #define RTL8366RB_LED_FORCE 0xf
202 #define RTL8366RB_LED_0_1_CTRL_REG 0x0432
203 #define RTL8366RB_LED_1_OFFSET 6
204 #define RTL8366RB_LED_2_3_CTRL_REG 0x0433
205 #define RTL8366RB_LED_3_OFFSET 6
206
207 #define RTL8366RB_MIB_COUNT 33
208 #define RTL8366RB_GLOBAL_MIB_COUNT 1
209 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050
210 #define RTL8366RB_MIB_COUNTER_BASE 0x1000
211 #define RTL8366RB_MIB_CTRL_REG 0x13F0
212 #define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC
213 #define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0)
214 #define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1)
215 #define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p))
216 #define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11)
217
218 #define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063
219 #define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \
220 (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4)
221 #define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf
222 #define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4))
223
224 #define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C
225 #define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185
226
227 #define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180
228 #define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01
229 #define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01
230
231 #define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3)
232
233 #define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014
234 #define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003
235 #define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004
236 #define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010
237 #define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020
238 #define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040
239 #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
240
241 #define RTL8366RB_NUM_VLANS 16
242 #define RTL8366RB_NUM_LEDGROUPS 4
243 #define RTL8366RB_NUM_VIDS 4096
244 #define RTL8366RB_PRIORITYMAX 7
245 #define RTL8366RB_NUM_FIDS 8
246 #define RTL8366RB_FIDMAX 7
247
248 #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
249 #define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */
250 #define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */
251 #define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */
252 #define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */
253
254 #define RTL8366RB_PORT_CPU BIT(5) /* CPU port */
255
256 #define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \
257 RTL8366RB_PORT_2 | \
258 RTL8366RB_PORT_3 | \
259 RTL8366RB_PORT_4 | \
260 RTL8366RB_PORT_5 | \
261 RTL8366RB_PORT_CPU)
262
263 #define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \
264 RTL8366RB_PORT_2 | \
265 RTL8366RB_PORT_3 | \
266 RTL8366RB_PORT_4 | \
267 RTL8366RB_PORT_5)
268
269 #define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \
270 RTL8366RB_PORT_2 | \
271 RTL8366RB_PORT_3 | \
272 RTL8366RB_PORT_4)
273
274 #define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU
275
276 /* First configuration word per member config, VID and prio */
277 #define RTL8366RB_VLAN_VID_MASK 0xfff
278 #define RTL8366RB_VLAN_PRIORITY_SHIFT 12
279 #define RTL8366RB_VLAN_PRIORITY_MASK 0x7
280 /* Second configuration word per member config, member and untagged */
281 #define RTL8366RB_VLAN_UNTAG_SHIFT 8
282 #define RTL8366RB_VLAN_UNTAG_MASK 0xff
283 #define RTL8366RB_VLAN_MEMBER_MASK 0xff
284 /* Third config word per member config, STAG currently unused */
285 #define RTL8366RB_VLAN_STAG_MBR_MASK 0xff
286 #define RTL8366RB_VLAN_STAG_MBR_SHIFT 8
287 #define RTL8366RB_VLAN_STAG_IDX_MASK 0x7
288 #define RTL8366RB_VLAN_STAG_IDX_SHIFT 5
289 #define RTL8366RB_VLAN_FID_MASK 0x7
290
291 /* Port ingress bandwidth control */
292 #define RTL8366RB_IB_BASE 0x0200
293 #define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum))
294 #define RTL8366RB_IB_BDTH_MASK 0x3fff
295 #define RTL8366RB_IB_PREIFG BIT(14)
296
297 /* Port egress bandwidth control */
298 #define RTL8366RB_EB_BASE 0x02d1
299 #define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum))
300 #define RTL8366RB_EB_BDTH_MASK 0x3fff
301 #define RTL8366RB_EB_PREIFG_REG 0x02f8
302 #define RTL8366RB_EB_PREIFG BIT(9)
303
304 #define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */
305 #define RTL8366RB_BDTH_UNIT 64
306 #define RTL8366RB_BDTH_REG_DEFAULT 16383
307
308 /* QOS */
309 #define RTL8366RB_QOS BIT(15)
310 /* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
311 #define RTL8366RB_QOS_DEFAULT_PREIFG 1
312
313 /* Interrupt handling */
314 #define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440
315 #define RTL8366RB_INTERRUPT_POLARITY BIT(0)
316 #define RTL8366RB_P4_RGMII_LED BIT(2)
317 #define RTL8366RB_INTERRUPT_MASK_REG 0x0441
318 #define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0)
319 #define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8)
320 #define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9)
321 #define RTL8366RB_INTERRUPT_P4_FIBER BIT(12)
322 #define RTL8366RB_INTERRUPT_P4_UTP BIT(13)
323 #define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \
324 RTL8366RB_INTERRUPT_ACLEXCEED | \
325 RTL8366RB_INTERRUPT_STORMEXCEED | \
326 RTL8366RB_INTERRUPT_P4_FIBER | \
327 RTL8366RB_INTERRUPT_P4_UTP)
328 #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
329 #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
330
331 /* Port isolation registers */
332 #define RTL8366RB_PORT_ISO_BASE 0x0F08
333 #define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
334 #define RTL8366RB_PORT_ISO_EN BIT(0)
335 #define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
336 #define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1)
337
338 /* bits 0..5 enable force when cleared */
339 #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
340
341 #define RTL8366RB_OAM_PARSER_REG 0x0F14
342 #define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15
343
344 #define RTL8366RB_GREEN_FEATURE_REG 0x0F51
345 #define RTL8366RB_GREEN_FEATURE_MSK 0x0007
346 #define RTL8366RB_GREEN_FEATURE_TX BIT(0)
347 #define RTL8366RB_GREEN_FEATURE_RX BIT(2)
348
349 /**
350 * struct rtl8366rb - RTL8366RB-specific data
351 * @max_mtu: per-port max MTU setting
352 * @pvid_enabled: if PVID is set for respective port
353 */
354 struct rtl8366rb {
355 unsigned int max_mtu[RTL8366RB_NUM_PORTS];
356 bool pvid_enabled[RTL8366RB_NUM_PORTS];
357 };
358
359 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
360 { 0, 0, 4, "IfInOctets" },
361 { 0, 4, 4, "EtherStatsOctets" },
362 { 0, 8, 2, "EtherStatsUnderSizePkts" },
363 { 0, 10, 2, "EtherFragments" },
364 { 0, 12, 2, "EtherStatsPkts64Octets" },
365 { 0, 14, 2, "EtherStatsPkts65to127Octets" },
366 { 0, 16, 2, "EtherStatsPkts128to255Octets" },
367 { 0, 18, 2, "EtherStatsPkts256to511Octets" },
368 { 0, 20, 2, "EtherStatsPkts512to1023Octets" },
369 { 0, 22, 2, "EtherStatsPkts1024to1518Octets" },
370 { 0, 24, 2, "EtherOversizeStats" },
371 { 0, 26, 2, "EtherStatsJabbers" },
372 { 0, 28, 2, "IfInUcastPkts" },
373 { 0, 30, 2, "EtherStatsMulticastPkts" },
374 { 0, 32, 2, "EtherStatsBroadcastPkts" },
375 { 0, 34, 2, "EtherStatsDropEvents" },
376 { 0, 36, 2, "Dot3StatsFCSErrors" },
377 { 0, 38, 2, "Dot3StatsSymbolErrors" },
378 { 0, 40, 2, "Dot3InPauseFrames" },
379 { 0, 42, 2, "Dot3ControlInUnknownOpcodes" },
380 { 0, 44, 4, "IfOutOctets" },
381 { 0, 48, 2, "Dot3StatsSingleCollisionFrames" },
382 { 0, 50, 2, "Dot3StatMultipleCollisionFrames" },
383 { 0, 52, 2, "Dot3sDeferredTransmissions" },
384 { 0, 54, 2, "Dot3StatsLateCollisions" },
385 { 0, 56, 2, "EtherStatsCollisions" },
386 { 0, 58, 2, "Dot3StatsExcessiveCollisions" },
387 { 0, 60, 2, "Dot3OutPauseFrames" },
388 { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" },
389 { 0, 64, 2, "Dot1dTpPortInDiscards" },
390 { 0, 66, 2, "IfOutUcastPkts" },
391 { 0, 68, 2, "IfOutMulticastPkts" },
392 { 0, 70, 2, "IfOutBroadcastPkts" },
393 };
394
rtl8366rb_get_mib_counter(struct realtek_priv * priv,int port,struct rtl8366_mib_counter * mib,u64 * mibvalue)395 static int rtl8366rb_get_mib_counter(struct realtek_priv *priv,
396 int port,
397 struct rtl8366_mib_counter *mib,
398 u64 *mibvalue)
399 {
400 u32 addr, val;
401 int ret;
402 int i;
403
404 addr = RTL8366RB_MIB_COUNTER_BASE +
405 RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) +
406 mib->offset;
407
408 /* Writing access counter address first
409 * then ASIC will prepare 64bits counter wait for being retrived
410 */
411 ret = regmap_write(priv->map, addr, 0); /* Write whatever */
412 if (ret)
413 return ret;
414
415 /* Read MIB control register */
416 ret = regmap_read(priv->map, RTL8366RB_MIB_CTRL_REG, &val);
417 if (ret)
418 return -EIO;
419
420 if (val & RTL8366RB_MIB_CTRL_BUSY_MASK)
421 return -EBUSY;
422
423 if (val & RTL8366RB_MIB_CTRL_RESET_MASK)
424 return -EIO;
425
426 /* Read each individual MIB 16 bits at the time */
427 *mibvalue = 0;
428 for (i = mib->length; i > 0; i--) {
429 ret = regmap_read(priv->map, addr + (i - 1), &val);
430 if (ret)
431 return ret;
432 *mibvalue = (*mibvalue << 16) | (val & 0xFFFF);
433 }
434 return 0;
435 }
436
rtl8366rb_get_irqmask(struct irq_data * d)437 static u32 rtl8366rb_get_irqmask(struct irq_data *d)
438 {
439 int line = irqd_to_hwirq(d);
440 u32 val;
441
442 /* For line interrupts we combine link down in bits
443 * 6..11 with link up in bits 0..5 into one interrupt.
444 */
445 if (line < 12)
446 val = BIT(line) | BIT(line + 6);
447 else
448 val = BIT(line);
449 return val;
450 }
451
rtl8366rb_mask_irq(struct irq_data * d)452 static void rtl8366rb_mask_irq(struct irq_data *d)
453 {
454 struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
455 int ret;
456
457 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
458 rtl8366rb_get_irqmask(d), 0);
459 if (ret)
460 dev_err(priv->dev, "could not mask IRQ\n");
461 }
462
rtl8366rb_unmask_irq(struct irq_data * d)463 static void rtl8366rb_unmask_irq(struct irq_data *d)
464 {
465 struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
466 int ret;
467
468 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
469 rtl8366rb_get_irqmask(d),
470 rtl8366rb_get_irqmask(d));
471 if (ret)
472 dev_err(priv->dev, "could not unmask IRQ\n");
473 }
474
rtl8366rb_irq(int irq,void * data)475 static irqreturn_t rtl8366rb_irq(int irq, void *data)
476 {
477 struct realtek_priv *priv = data;
478 u32 stat;
479 int ret;
480
481 /* This clears the IRQ status register */
482 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
483 &stat);
484 if (ret) {
485 dev_err(priv->dev, "can't read interrupt status\n");
486 return IRQ_NONE;
487 }
488 stat &= RTL8366RB_INTERRUPT_VALID;
489 if (!stat)
490 return IRQ_NONE;
491 while (stat) {
492 int line = __ffs(stat);
493 int child_irq;
494
495 stat &= ~BIT(line);
496 /* For line interrupts we combine link down in bits
497 * 6..11 with link up in bits 0..5 into one interrupt.
498 */
499 if (line < 12 && line > 5)
500 line -= 5;
501 child_irq = irq_find_mapping(priv->irqdomain, line);
502 handle_nested_irq(child_irq);
503 }
504 return IRQ_HANDLED;
505 }
506
507 static struct irq_chip rtl8366rb_irq_chip = {
508 .name = "RTL8366RB",
509 .irq_mask = rtl8366rb_mask_irq,
510 .irq_unmask = rtl8366rb_unmask_irq,
511 };
512
rtl8366rb_irq_map(struct irq_domain * domain,unsigned int irq,irq_hw_number_t hwirq)513 static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq,
514 irq_hw_number_t hwirq)
515 {
516 irq_set_chip_data(irq, domain->host_data);
517 irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq);
518 irq_set_nested_thread(irq, 1);
519 irq_set_noprobe(irq);
520
521 return 0;
522 }
523
rtl8366rb_irq_unmap(struct irq_domain * d,unsigned int irq)524 static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq)
525 {
526 irq_set_nested_thread(irq, 0);
527 irq_set_chip_and_handler(irq, NULL, NULL);
528 irq_set_chip_data(irq, NULL);
529 }
530
531 static const struct irq_domain_ops rtl8366rb_irqdomain_ops = {
532 .map = rtl8366rb_irq_map,
533 .unmap = rtl8366rb_irq_unmap,
534 .xlate = irq_domain_xlate_onecell,
535 };
536
rtl8366rb_setup_cascaded_irq(struct realtek_priv * priv)537 static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv)
538 {
539 struct device_node *intc;
540 unsigned long irq_trig;
541 int irq;
542 int ret;
543 u32 val;
544 int i;
545
546 intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller");
547 if (!intc) {
548 dev_err(priv->dev, "missing child interrupt-controller node\n");
549 return -EINVAL;
550 }
551 /* RB8366RB IRQs cascade off this one */
552 irq = of_irq_get(intc, 0);
553 if (irq <= 0) {
554 dev_err(priv->dev, "failed to get parent IRQ\n");
555 ret = irq ? irq : -EINVAL;
556 goto out_put_node;
557 }
558
559 /* This clears the IRQ status register */
560 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
561 &val);
562 if (ret) {
563 dev_err(priv->dev, "can't read interrupt status\n");
564 goto out_put_node;
565 }
566
567 /* Fetch IRQ edge information from the descriptor */
568 irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
569 switch (irq_trig) {
570 case IRQF_TRIGGER_RISING:
571 case IRQF_TRIGGER_HIGH:
572 dev_info(priv->dev, "active high/rising IRQ\n");
573 val = 0;
574 break;
575 case IRQF_TRIGGER_FALLING:
576 case IRQF_TRIGGER_LOW:
577 dev_info(priv->dev, "active low/falling IRQ\n");
578 val = RTL8366RB_INTERRUPT_POLARITY;
579 break;
580 }
581 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG,
582 RTL8366RB_INTERRUPT_POLARITY,
583 val);
584 if (ret) {
585 dev_err(priv->dev, "could not configure IRQ polarity\n");
586 goto out_put_node;
587 }
588
589 ret = devm_request_threaded_irq(priv->dev, irq, NULL,
590 rtl8366rb_irq, IRQF_ONESHOT,
591 "RTL8366RB", priv);
592 if (ret) {
593 dev_err(priv->dev, "unable to request irq: %d\n", ret);
594 goto out_put_node;
595 }
596 priv->irqdomain = irq_domain_add_linear(intc,
597 RTL8366RB_NUM_INTERRUPT,
598 &rtl8366rb_irqdomain_ops,
599 priv);
600 if (!priv->irqdomain) {
601 dev_err(priv->dev, "failed to create IRQ domain\n");
602 ret = -EINVAL;
603 goto out_put_node;
604 }
605 for (i = 0; i < priv->num_ports; i++)
606 irq_set_parent(irq_create_mapping(priv->irqdomain, i), irq);
607
608 out_put_node:
609 of_node_put(intc);
610 return ret;
611 }
612
rtl8366rb_set_addr(struct realtek_priv * priv)613 static int rtl8366rb_set_addr(struct realtek_priv *priv)
614 {
615 u8 addr[ETH_ALEN];
616 u16 val;
617 int ret;
618
619 eth_random_addr(addr);
620
621 dev_info(priv->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n",
622 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
623 val = addr[0] << 8 | addr[1];
624 ret = regmap_write(priv->map, RTL8366RB_SMAR0, val);
625 if (ret)
626 return ret;
627 val = addr[2] << 8 | addr[3];
628 ret = regmap_write(priv->map, RTL8366RB_SMAR1, val);
629 if (ret)
630 return ret;
631 val = addr[4] << 8 | addr[5];
632 ret = regmap_write(priv->map, RTL8366RB_SMAR2, val);
633 if (ret)
634 return ret;
635
636 return 0;
637 }
638
639 /* Found in a vendor driver */
640
641 /* Struct for handling the jam tables' entries */
642 struct rtl8366rb_jam_tbl_entry {
643 u16 reg;
644 u16 val;
645 };
646
647 /* For the "version 0" early silicon, appear in most source releases */
648 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_0[] = {
649 {0x000B, 0x0001}, {0x03A6, 0x0100}, {0x03A7, 0x0001}, {0x02D1, 0x3FFF},
650 {0x02D2, 0x3FFF}, {0x02D3, 0x3FFF}, {0x02D4, 0x3FFF}, {0x02D5, 0x3FFF},
651 {0x02D6, 0x3FFF}, {0x02D7, 0x3FFF}, {0x02D8, 0x3FFF}, {0x022B, 0x0688},
652 {0x022C, 0x0FAC}, {0x03D0, 0x4688}, {0x03D1, 0x01F5}, {0x0000, 0x0830},
653 {0x02F9, 0x0200}, {0x02F7, 0x7FFF}, {0x02F8, 0x03FF}, {0x0080, 0x03E8},
654 {0x0081, 0x00CE}, {0x0082, 0x00DA}, {0x0083, 0x0230}, {0xBE0F, 0x2000},
655 {0x0231, 0x422A}, {0x0232, 0x422A}, {0x0233, 0x422A}, {0x0234, 0x422A},
656 {0x0235, 0x422A}, {0x0236, 0x422A}, {0x0237, 0x422A}, {0x0238, 0x422A},
657 {0x0239, 0x422A}, {0x023A, 0x422A}, {0x023B, 0x422A}, {0x023C, 0x422A},
658 {0x023D, 0x422A}, {0x023E, 0x422A}, {0x023F, 0x422A}, {0x0240, 0x422A},
659 {0x0241, 0x422A}, {0x0242, 0x422A}, {0x0243, 0x422A}, {0x0244, 0x422A},
660 {0x0245, 0x422A}, {0x0246, 0x422A}, {0x0247, 0x422A}, {0x0248, 0x422A},
661 {0x0249, 0x0146}, {0x024A, 0x0146}, {0x024B, 0x0146}, {0xBE03, 0xC961},
662 {0x024D, 0x0146}, {0x024E, 0x0146}, {0x024F, 0x0146}, {0x0250, 0x0146},
663 {0xBE64, 0x0226}, {0x0252, 0x0146}, {0x0253, 0x0146}, {0x024C, 0x0146},
664 {0x0251, 0x0146}, {0x0254, 0x0146}, {0xBE62, 0x3FD0}, {0x0084, 0x0320},
665 {0x0255, 0x0146}, {0x0256, 0x0146}, {0x0257, 0x0146}, {0x0258, 0x0146},
666 {0x0259, 0x0146}, {0x025A, 0x0146}, {0x025B, 0x0146}, {0x025C, 0x0146},
667 {0x025D, 0x0146}, {0x025E, 0x0146}, {0x025F, 0x0146}, {0x0260, 0x0146},
668 {0x0261, 0xA23F}, {0x0262, 0x0294}, {0x0263, 0xA23F}, {0x0264, 0x0294},
669 {0x0265, 0xA23F}, {0x0266, 0x0294}, {0x0267, 0xA23F}, {0x0268, 0x0294},
670 {0x0269, 0xA23F}, {0x026A, 0x0294}, {0x026B, 0xA23F}, {0x026C, 0x0294},
671 {0x026D, 0xA23F}, {0x026E, 0x0294}, {0x026F, 0xA23F}, {0x0270, 0x0294},
672 {0x02F5, 0x0048}, {0xBE09, 0x0E00}, {0xBE1E, 0x0FA0}, {0xBE14, 0x8448},
673 {0xBE15, 0x1007}, {0xBE4A, 0xA284}, {0xC454, 0x3F0B}, {0xC474, 0x3F0B},
674 {0xBE48, 0x3672}, {0xBE4B, 0x17A7}, {0xBE4C, 0x0B15}, {0xBE52, 0x0EDD},
675 {0xBE49, 0x8C00}, {0xBE5B, 0x785C}, {0xBE5C, 0x785C}, {0xBE5D, 0x785C},
676 {0xBE61, 0x368A}, {0xBE63, 0x9B84}, {0xC456, 0xCC13}, {0xC476, 0xCC13},
677 {0xBE65, 0x307D}, {0xBE6D, 0x0005}, {0xBE6E, 0xE120}, {0xBE2E, 0x7BAF},
678 };
679
680 /* This v1 init sequence is from Belkin F5D8235 U-Boot release */
681 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_1[] = {
682 {0x0000, 0x0830}, {0x0001, 0x8000}, {0x0400, 0x8130}, {0xBE78, 0x3C3C},
683 {0x0431, 0x5432}, {0xBE37, 0x0CE4}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
684 {0xC44C, 0x1585}, {0xC44C, 0x1185}, {0xC44C, 0x1585}, {0xC46C, 0x1585},
685 {0xC46C, 0x1185}, {0xC46C, 0x1585}, {0xC451, 0x2135}, {0xC471, 0x2135},
686 {0xBE10, 0x8140}, {0xBE15, 0x0007}, {0xBE6E, 0xE120}, {0xBE69, 0xD20F},
687 {0xBE6B, 0x0320}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF20},
688 {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, {0xBE24, 0x0000},
689 {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, {0xBE21, 0x0140},
690 {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, {0xBE2E, 0x7B7A},
691 {0xBE36, 0x0CE4}, {0x02F5, 0x0048}, {0xBE77, 0x2940}, {0x000A, 0x83E0},
692 {0xBE79, 0x3C3C}, {0xBE00, 0x1340},
693 };
694
695 /* This v2 init sequence is from Belkin F5D8235 U-Boot release */
696 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_2[] = {
697 {0x0450, 0x0000}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
698 {0xC44F, 0x6250}, {0xC46F, 0x6250}, {0xC456, 0x0C14}, {0xC476, 0x0C14},
699 {0xC44C, 0x1C85}, {0xC44C, 0x1885}, {0xC44C, 0x1C85}, {0xC46C, 0x1C85},
700 {0xC46C, 0x1885}, {0xC46C, 0x1C85}, {0xC44C, 0x0885}, {0xC44C, 0x0881},
701 {0xC44C, 0x0885}, {0xC46C, 0x0885}, {0xC46C, 0x0881}, {0xC46C, 0x0885},
702 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
703 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6E, 0x0320},
704 {0xBE77, 0x2940}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
705 {0x8000, 0x0001}, {0xBE15, 0x1007}, {0x8000, 0x0000}, {0xBE15, 0x1007},
706 {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, {0xBE10, 0x8140},
707 {0xBE00, 0x1340}, {0x0F51, 0x0010},
708 };
709
710 /* Appears in a DDWRT code dump */
711 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_3[] = {
712 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
713 {0x0F51, 0x0017}, {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
714 {0xC456, 0x0C14}, {0xC476, 0x0C14}, {0xC454, 0x3F8B}, {0xC474, 0x3F8B},
715 {0xC450, 0x2071}, {0xC470, 0x2071}, {0xC451, 0x226B}, {0xC471, 0x226B},
716 {0xC452, 0xA293}, {0xC472, 0xA293}, {0xC44C, 0x1585}, {0xC44C, 0x1185},
717 {0xC44C, 0x1585}, {0xC46C, 0x1585}, {0xC46C, 0x1185}, {0xC46C, 0x1585},
718 {0xC44C, 0x0185}, {0xC44C, 0x0181}, {0xC44C, 0x0185}, {0xC46C, 0x0185},
719 {0xC46C, 0x0181}, {0xC46C, 0x0185}, {0xBE24, 0xB000}, {0xBE23, 0xFF51},
720 {0xBE22, 0xDF20}, {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800},
721 {0xBE24, 0x0000}, {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60},
722 {0xBE21, 0x0140}, {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000},
723 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
724 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6B, 0x0320},
725 {0xBE77, 0x2800}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
726 {0x8000, 0x0001}, {0xBE10, 0x8140}, {0x8000, 0x0000}, {0xBE10, 0x8140},
727 {0xBE15, 0x1007}, {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160},
728 {0xBE10, 0x8140}, {0xBE00, 0x1340}, {0x0450, 0x0000}, {0x0401, 0x0000},
729 };
730
731 /* Belkin F5D8235 v1, "belkin,f5d8235-v1" */
732 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_f5d8235[] = {
733 {0x0242, 0x02BF}, {0x0245, 0x02BF}, {0x0248, 0x02BF}, {0x024B, 0x02BF},
734 {0x024E, 0x02BF}, {0x0251, 0x02BF}, {0x0254, 0x0A3F}, {0x0256, 0x0A3F},
735 {0x0258, 0x0A3F}, {0x025A, 0x0A3F}, {0x025C, 0x0A3F}, {0x025E, 0x0A3F},
736 {0x0263, 0x007C}, {0x0100, 0x0004}, {0xBE5B, 0x3500}, {0x800E, 0x200F},
737 {0xBE1D, 0x0F00}, {0x8001, 0x5011}, {0x800A, 0xA2F4}, {0x800B, 0x17A3},
738 {0xBE4B, 0x17A3}, {0xBE41, 0x5011}, {0xBE17, 0x2100}, {0x8000, 0x8304},
739 {0xBE40, 0x8304}, {0xBE4A, 0xA2F4}, {0x800C, 0xA8D5}, {0x8014, 0x5500},
740 {0x8015, 0x0004}, {0xBE4C, 0xA8D5}, {0xBE59, 0x0008}, {0xBE09, 0x0E00},
741 {0xBE36, 0x1036}, {0xBE37, 0x1036}, {0x800D, 0x00FF}, {0xBE4D, 0x00FF},
742 };
743
744 /* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */
745 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_dgn3500[] = {
746 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0F51, 0x0017},
747 {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, {0x0450, 0x0000},
748 {0x0401, 0x0000}, {0x0431, 0x0960},
749 };
750
751 /* This jam table activates "green ethernet", which means low power mode
752 * and is claimed to detect the cable length and not use more power than
753 * necessary, and the ports should enter power saving mode 10 seconds after
754 * a cable is disconnected. Seems to always be the same.
755 */
756 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_green_jam[] = {
757 {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7},
758 {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C},
759 {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C},
760 };
761
762 /* Function that jams the tables in the proper registers */
rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry * jam_table,int jam_size,struct realtek_priv * priv,bool write_dbg)763 static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
764 int jam_size, struct realtek_priv *priv,
765 bool write_dbg)
766 {
767 u32 val;
768 int ret;
769 int i;
770
771 for (i = 0; i < jam_size; i++) {
772 if ((jam_table[i].reg & 0xBE00) == 0xBE00) {
773 ret = regmap_read(priv->map,
774 RTL8366RB_PHY_ACCESS_BUSY_REG,
775 &val);
776 if (ret)
777 return ret;
778 if (!(val & RTL8366RB_PHY_INT_BUSY)) {
779 ret = regmap_write(priv->map,
780 RTL8366RB_PHY_ACCESS_CTRL_REG,
781 RTL8366RB_PHY_CTRL_WRITE);
782 if (ret)
783 return ret;
784 }
785 }
786 if (write_dbg)
787 dev_dbg(priv->dev, "jam %04x into register %04x\n",
788 jam_table[i].val,
789 jam_table[i].reg);
790 ret = regmap_write(priv->map,
791 jam_table[i].reg,
792 jam_table[i].val);
793 if (ret)
794 return ret;
795 }
796 return 0;
797 }
798
rtl8366rb_setup(struct dsa_switch * ds)799 static int rtl8366rb_setup(struct dsa_switch *ds)
800 {
801 struct realtek_priv *priv = ds->priv;
802 const struct rtl8366rb_jam_tbl_entry *jam_table;
803 struct rtl8366rb *rb;
804 u32 chip_ver = 0;
805 u32 chip_id = 0;
806 int jam_size;
807 u32 val;
808 int ret;
809 int i;
810
811 rb = priv->chip_data;
812
813 ret = regmap_read(priv->map, RTL8366RB_CHIP_ID_REG, &chip_id);
814 if (ret) {
815 dev_err(priv->dev, "unable to read chip id\n");
816 return ret;
817 }
818
819 switch (chip_id) {
820 case RTL8366RB_CHIP_ID_8366:
821 break;
822 default:
823 dev_err(priv->dev, "unknown chip id (%04x)\n", chip_id);
824 return -ENODEV;
825 }
826
827 ret = regmap_read(priv->map, RTL8366RB_CHIP_VERSION_CTRL_REG,
828 &chip_ver);
829 if (ret) {
830 dev_err(priv->dev, "unable to read chip version\n");
831 return ret;
832 }
833
834 dev_info(priv->dev, "RTL%04x ver %u chip found\n",
835 chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK);
836
837 /* Do the init dance using the right jam table */
838 switch (chip_ver) {
839 case 0:
840 jam_table = rtl8366rb_init_jam_ver_0;
841 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0);
842 break;
843 case 1:
844 jam_table = rtl8366rb_init_jam_ver_1;
845 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1);
846 break;
847 case 2:
848 jam_table = rtl8366rb_init_jam_ver_2;
849 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2);
850 break;
851 default:
852 jam_table = rtl8366rb_init_jam_ver_3;
853 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3);
854 break;
855 }
856
857 /* Special jam tables for special routers
858 * TODO: are these necessary? Maintainers, please test
859 * without them, using just the off-the-shelf tables.
860 */
861 if (of_machine_is_compatible("belkin,f5d8235-v1")) {
862 jam_table = rtl8366rb_init_jam_f5d8235;
863 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235);
864 }
865 if (of_machine_is_compatible("netgear,dgn3500") ||
866 of_machine_is_compatible("netgear,dgn3500b")) {
867 jam_table = rtl8366rb_init_jam_dgn3500;
868 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500);
869 }
870
871 ret = rtl8366rb_jam_table(jam_table, jam_size, priv, true);
872 if (ret)
873 return ret;
874
875 /* Isolate all user ports so they can only send packets to itself and the CPU port */
876 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
877 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(i),
878 RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
879 RTL8366RB_PORT_ISO_EN);
880 if (ret)
881 return ret;
882 }
883 /* CPU port can send packets to all ports */
884 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
885 RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
886 RTL8366RB_PORT_ISO_EN);
887 if (ret)
888 return ret;
889
890 /* Set up the "green ethernet" feature */
891 ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
892 ARRAY_SIZE(rtl8366rb_green_jam), priv, false);
893 if (ret)
894 return ret;
895
896 ret = regmap_write(priv->map,
897 RTL8366RB_GREEN_FEATURE_REG,
898 (chip_ver == 1) ? 0x0007 : 0x0003);
899 if (ret)
900 return ret;
901
902 /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */
903 ret = regmap_write(priv->map, 0x0c, 0x240);
904 if (ret)
905 return ret;
906 ret = regmap_write(priv->map, 0x0d, 0x240);
907 if (ret)
908 return ret;
909
910 /* Set some random MAC address */
911 ret = rtl8366rb_set_addr(priv);
912 if (ret)
913 return ret;
914
915 /* Enable CPU port with custom DSA tag 8899.
916 *
917 * If you set RTL8366RB_CPU_NO_TAG (bit 15) in this register
918 * the custom tag is turned off.
919 */
920 ret = regmap_update_bits(priv->map, RTL8366RB_CPU_CTRL_REG,
921 0xFFFF,
922 BIT(priv->cpu_port));
923 if (ret)
924 return ret;
925
926 /* Make sure we default-enable the fixed CPU port */
927 ret = regmap_update_bits(priv->map, RTL8366RB_PECR,
928 BIT(priv->cpu_port),
929 0);
930 if (ret)
931 return ret;
932
933 /* Set default maximum packet length to 1536 bytes */
934 ret = regmap_update_bits(priv->map, RTL8366RB_SGCR,
935 RTL8366RB_SGCR_MAX_LENGTH_MASK,
936 RTL8366RB_SGCR_MAX_LENGTH_1536);
937 if (ret)
938 return ret;
939 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) {
940 if (i == priv->cpu_port)
941 /* CPU port need to also accept the tag */
942 rb->max_mtu[i] = ETH_DATA_LEN + RTL8366RB_CPU_TAG_SIZE;
943 else
944 rb->max_mtu[i] = ETH_DATA_LEN;
945 }
946
947 /* Disable learning for all ports */
948 ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
949 RTL8366RB_PORT_ALL);
950 if (ret)
951 return ret;
952
953 /* Enable auto ageing for all ports */
954 ret = regmap_write(priv->map, RTL8366RB_SECURITY_CTRL, 0);
955 if (ret)
956 return ret;
957
958 /* Port 4 setup: this enables Port 4, usually the WAN port,
959 * common PHY IO mode is apparently mode 0, and this is not what
960 * the port is initialized to. There is no explanation of the
961 * IO modes in the Realtek source code, if your WAN port is
962 * connected to something exotic such as fiber, then this might
963 * be worth experimenting with.
964 */
965 ret = regmap_update_bits(priv->map, RTL8366RB_PMC0,
966 RTL8366RB_PMC0_P4_IOMODE_MASK,
967 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT);
968 if (ret)
969 return ret;
970
971 /* Accept all packets by default, we enable filtering on-demand */
972 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
973 0);
974 if (ret)
975 return ret;
976 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
977 0);
978 if (ret)
979 return ret;
980
981 /* Don't drop packets whose DA has not been learned */
982 ret = regmap_update_bits(priv->map, RTL8366RB_SSCR2,
983 RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0);
984 if (ret)
985 return ret;
986
987 /* Set blinking, TODO: make this configurable */
988 ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
989 RTL8366RB_LED_BLINKRATE_MASK,
990 RTL8366RB_LED_BLINKRATE_56MS);
991 if (ret)
992 return ret;
993
994 /* Set up LED activity:
995 * Each port has 4 LEDs, we configure all ports to the same
996 * behaviour (no individual config) but we can set up each
997 * LED separately.
998 */
999 if (priv->leds_disabled) {
1000 /* Turn everything off */
1001 regmap_update_bits(priv->map,
1002 RTL8366RB_LED_0_1_CTRL_REG,
1003 0x0FFF, 0);
1004 regmap_update_bits(priv->map,
1005 RTL8366RB_LED_2_3_CTRL_REG,
1006 0x0FFF, 0);
1007 regmap_update_bits(priv->map,
1008 RTL8366RB_INTERRUPT_CONTROL_REG,
1009 RTL8366RB_P4_RGMII_LED,
1010 0);
1011 val = RTL8366RB_LED_OFF;
1012 } else {
1013 /* TODO: make this configurable per LED */
1014 val = RTL8366RB_LED_FORCE;
1015 }
1016 for (i = 0; i < 4; i++) {
1017 ret = regmap_update_bits(priv->map,
1018 RTL8366RB_LED_CTRL_REG,
1019 0xf << (i * 4),
1020 val << (i * 4));
1021 if (ret)
1022 return ret;
1023 }
1024
1025 ret = rtl8366_reset_vlan(priv);
1026 if (ret)
1027 return ret;
1028
1029 ret = rtl8366rb_setup_cascaded_irq(priv);
1030 if (ret)
1031 dev_info(priv->dev, "no interrupt support\n");
1032
1033 if (priv->setup_interface) {
1034 ret = priv->setup_interface(ds);
1035 if (ret) {
1036 dev_err(priv->dev, "could not set up MDIO bus\n");
1037 return -ENODEV;
1038 }
1039 }
1040
1041 return 0;
1042 }
1043
rtl8366_get_tag_protocol(struct dsa_switch * ds,int port,enum dsa_tag_protocol mp)1044 static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
1045 int port,
1046 enum dsa_tag_protocol mp)
1047 {
1048 /* This switch uses the 4 byte protocol A Realtek DSA tag */
1049 return DSA_TAG_PROTO_RTL4_A;
1050 }
1051
rtl8366rb_phylink_get_caps(struct dsa_switch * ds,int port,struct phylink_config * config)1052 static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port,
1053 struct phylink_config *config)
1054 {
1055 unsigned long *interfaces = config->supported_interfaces;
1056 struct realtek_priv *priv = ds->priv;
1057
1058 if (port == priv->cpu_port) {
1059 __set_bit(PHY_INTERFACE_MODE_MII, interfaces);
1060 __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
1061 /* REVMII only supports 100M FD */
1062 __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
1063 /* RGMII only supports 1G FD */
1064 phy_interface_set_rgmii(interfaces);
1065
1066 config->mac_capabilities = MAC_1000 | MAC_100 |
1067 MAC_SYM_PAUSE;
1068 } else {
1069 /* RSGMII port, but we don't have that, and we don't
1070 * specify in DT, so phylib uses the default of GMII
1071 */
1072 __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
1073 config->mac_capabilities = MAC_1000 | MAC_100 | MAC_10 |
1074 MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
1075 }
1076 }
1077
1078 static void
rtl8366rb_mac_link_up(struct dsa_switch * ds,int port,unsigned int mode,phy_interface_t interface,struct phy_device * phydev,int speed,int duplex,bool tx_pause,bool rx_pause)1079 rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
1080 phy_interface_t interface, struct phy_device *phydev,
1081 int speed, int duplex, bool tx_pause, bool rx_pause)
1082 {
1083 struct realtek_priv *priv = ds->priv;
1084 unsigned int val;
1085 int ret;
1086
1087 /* Allow forcing the mode on the fixed CPU port, no autonegotiation.
1088 * We assume autonegotiation works on the PHY-facing ports.
1089 */
1090 if (port != priv->cpu_port)
1091 return;
1092
1093 dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port);
1094
1095 ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG,
1096 BIT(port), BIT(port));
1097 if (ret) {
1098 dev_err(priv->dev, "failed to force CPU port\n");
1099 return;
1100 }
1101
1102 /* Conjure port config */
1103 switch (speed) {
1104 case SPEED_10:
1105 val = RTL8366RB_PAACR_SPEED_10M;
1106 break;
1107 case SPEED_100:
1108 val = RTL8366RB_PAACR_SPEED_100M;
1109 break;
1110 case SPEED_1000:
1111 val = RTL8366RB_PAACR_SPEED_1000M;
1112 break;
1113 default:
1114 val = RTL8366RB_PAACR_SPEED_1000M;
1115 break;
1116 }
1117
1118 if (duplex == DUPLEX_FULL)
1119 val |= RTL8366RB_PAACR_FULL_DUPLEX;
1120
1121 if (tx_pause)
1122 val |= RTL8366RB_PAACR_TX_PAUSE;
1123
1124 if (rx_pause)
1125 val |= RTL8366RB_PAACR_RX_PAUSE;
1126
1127 val |= RTL8366RB_PAACR_LINK_UP;
1128
1129 ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2,
1130 0xFF00U,
1131 val << 8);
1132 if (ret) {
1133 dev_err(priv->dev, "failed to set PAACR on CPU port\n");
1134 return;
1135 }
1136
1137 dev_dbg(priv->dev, "set PAACR to %04x\n", val);
1138
1139 /* Enable the CPU port */
1140 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1141 0);
1142 if (ret) {
1143 dev_err(priv->dev, "failed to enable the CPU port\n");
1144 return;
1145 }
1146 }
1147
1148 static void
rtl8366rb_mac_link_down(struct dsa_switch * ds,int port,unsigned int mode,phy_interface_t interface)1149 rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
1150 phy_interface_t interface)
1151 {
1152 struct realtek_priv *priv = ds->priv;
1153 int ret;
1154
1155 if (port != priv->cpu_port)
1156 return;
1157
1158 dev_dbg(priv->dev, "MAC link down on CPU port (%d)\n", port);
1159
1160 /* Disable the CPU port */
1161 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1162 BIT(port));
1163 if (ret) {
1164 dev_err(priv->dev, "failed to disable the CPU port\n");
1165 return;
1166 }
1167 }
1168
rb8366rb_set_port_led(struct realtek_priv * priv,int port,bool enable)1169 static void rb8366rb_set_port_led(struct realtek_priv *priv,
1170 int port, bool enable)
1171 {
1172 u16 val = enable ? 0x3f : 0;
1173 int ret;
1174
1175 if (priv->leds_disabled)
1176 return;
1177
1178 switch (port) {
1179 case 0:
1180 ret = regmap_update_bits(priv->map,
1181 RTL8366RB_LED_0_1_CTRL_REG,
1182 0x3F, val);
1183 break;
1184 case 1:
1185 ret = regmap_update_bits(priv->map,
1186 RTL8366RB_LED_0_1_CTRL_REG,
1187 0x3F << RTL8366RB_LED_1_OFFSET,
1188 val << RTL8366RB_LED_1_OFFSET);
1189 break;
1190 case 2:
1191 ret = regmap_update_bits(priv->map,
1192 RTL8366RB_LED_2_3_CTRL_REG,
1193 0x3F, val);
1194 break;
1195 case 3:
1196 ret = regmap_update_bits(priv->map,
1197 RTL8366RB_LED_2_3_CTRL_REG,
1198 0x3F << RTL8366RB_LED_3_OFFSET,
1199 val << RTL8366RB_LED_3_OFFSET);
1200 break;
1201 case 4:
1202 ret = regmap_update_bits(priv->map,
1203 RTL8366RB_INTERRUPT_CONTROL_REG,
1204 RTL8366RB_P4_RGMII_LED,
1205 enable ? RTL8366RB_P4_RGMII_LED : 0);
1206 break;
1207 default:
1208 dev_err(priv->dev, "no LED for port %d\n", port);
1209 return;
1210 }
1211 if (ret)
1212 dev_err(priv->dev, "error updating LED on port %d\n", port);
1213 }
1214
1215 static int
rtl8366rb_port_enable(struct dsa_switch * ds,int port,struct phy_device * phy)1216 rtl8366rb_port_enable(struct dsa_switch *ds, int port,
1217 struct phy_device *phy)
1218 {
1219 struct realtek_priv *priv = ds->priv;
1220 int ret;
1221
1222 dev_dbg(priv->dev, "enable port %d\n", port);
1223 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1224 0);
1225 if (ret)
1226 return ret;
1227
1228 rb8366rb_set_port_led(priv, port, true);
1229 return 0;
1230 }
1231
1232 static void
rtl8366rb_port_disable(struct dsa_switch * ds,int port)1233 rtl8366rb_port_disable(struct dsa_switch *ds, int port)
1234 {
1235 struct realtek_priv *priv = ds->priv;
1236 int ret;
1237
1238 dev_dbg(priv->dev, "disable port %d\n", port);
1239 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1240 BIT(port));
1241 if (ret)
1242 return;
1243
1244 rb8366rb_set_port_led(priv, port, false);
1245 }
1246
1247 static int
rtl8366rb_port_bridge_join(struct dsa_switch * ds,int port,struct dsa_bridge bridge,bool * tx_fwd_offload,struct netlink_ext_ack * extack)1248 rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
1249 struct dsa_bridge bridge,
1250 bool *tx_fwd_offload,
1251 struct netlink_ext_ack *extack)
1252 {
1253 struct realtek_priv *priv = ds->priv;
1254 unsigned int port_bitmap = 0;
1255 int ret, i;
1256
1257 /* Loop over all other ports than the current one */
1258 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
1259 /* Current port handled last */
1260 if (i == port)
1261 continue;
1262 /* Not on this bridge */
1263 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1264 continue;
1265 /* Join this port to each other port on the bridge */
1266 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
1267 RTL8366RB_PORT_ISO_PORTS(BIT(port)),
1268 RTL8366RB_PORT_ISO_PORTS(BIT(port)));
1269 if (ret)
1270 dev_err(priv->dev, "failed to join port %d\n", port);
1271
1272 port_bitmap |= BIT(i);
1273 }
1274
1275 /* Set the bits for the ports we can access */
1276 return regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
1277 RTL8366RB_PORT_ISO_PORTS(port_bitmap),
1278 RTL8366RB_PORT_ISO_PORTS(port_bitmap));
1279 }
1280
1281 static void
rtl8366rb_port_bridge_leave(struct dsa_switch * ds,int port,struct dsa_bridge bridge)1282 rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
1283 struct dsa_bridge bridge)
1284 {
1285 struct realtek_priv *priv = ds->priv;
1286 unsigned int port_bitmap = 0;
1287 int ret, i;
1288
1289 /* Loop over all other ports than this one */
1290 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
1291 /* Current port handled last */
1292 if (i == port)
1293 continue;
1294 /* Not on this bridge */
1295 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1296 continue;
1297 /* Remove this port from any other port on the bridge */
1298 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
1299 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
1300 if (ret)
1301 dev_err(priv->dev, "failed to leave port %d\n", port);
1302
1303 port_bitmap |= BIT(i);
1304 }
1305
1306 /* Clear the bits for the ports we can not access, leave ourselves */
1307 regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
1308 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
1309 }
1310
1311 /**
1312 * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
1313 * @priv: SMI state container
1314 * @port: the port to drop untagged and C-tagged frames on
1315 * @drop: whether to drop or pass untagged and C-tagged frames
1316 *
1317 * Return: zero for success, a negative number on error.
1318 */
rtl8366rb_drop_untagged(struct realtek_priv * priv,int port,bool drop)1319 static int rtl8366rb_drop_untagged(struct realtek_priv *priv, int port, bool drop)
1320 {
1321 return regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
1322 RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
1323 drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
1324 }
1325
rtl8366rb_vlan_filtering(struct dsa_switch * ds,int port,bool vlan_filtering,struct netlink_ext_ack * extack)1326 static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
1327 bool vlan_filtering,
1328 struct netlink_ext_ack *extack)
1329 {
1330 struct realtek_priv *priv = ds->priv;
1331 struct rtl8366rb *rb;
1332 int ret;
1333
1334 rb = priv->chip_data;
1335
1336 dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port,
1337 vlan_filtering ? "enable" : "disable");
1338
1339 /* If the port is not in the member set, the frame will be dropped */
1340 ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
1341 BIT(port), vlan_filtering ? BIT(port) : 0);
1342 if (ret)
1343 return ret;
1344
1345 /* If VLAN filtering is enabled and PVID is also enabled, we must
1346 * not drop any untagged or C-tagged frames. If we turn off VLAN
1347 * filtering on a port, we need to accept any frames.
1348 */
1349 if (vlan_filtering)
1350 ret = rtl8366rb_drop_untagged(priv, port, !rb->pvid_enabled[port]);
1351 else
1352 ret = rtl8366rb_drop_untagged(priv, port, false);
1353
1354 return ret;
1355 }
1356
1357 static int
rtl8366rb_port_pre_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)1358 rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
1359 struct switchdev_brport_flags flags,
1360 struct netlink_ext_ack *extack)
1361 {
1362 /* We support enabling/disabling learning */
1363 if (flags.mask & ~(BR_LEARNING))
1364 return -EINVAL;
1365
1366 return 0;
1367 }
1368
1369 static int
rtl8366rb_port_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)1370 rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
1371 struct switchdev_brport_flags flags,
1372 struct netlink_ext_ack *extack)
1373 {
1374 struct realtek_priv *priv = ds->priv;
1375 int ret;
1376
1377 if (flags.mask & BR_LEARNING) {
1378 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
1379 BIT(port),
1380 (flags.val & BR_LEARNING) ? 0 : BIT(port));
1381 if (ret)
1382 return ret;
1383 }
1384
1385 return 0;
1386 }
1387
1388 static void
rtl8366rb_port_stp_state_set(struct dsa_switch * ds,int port,u8 state)1389 rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
1390 {
1391 struct realtek_priv *priv = ds->priv;
1392 u32 val;
1393 int i;
1394
1395 switch (state) {
1396 case BR_STATE_DISABLED:
1397 val = RTL8366RB_STP_STATE_DISABLED;
1398 break;
1399 case BR_STATE_BLOCKING:
1400 case BR_STATE_LISTENING:
1401 val = RTL8366RB_STP_STATE_BLOCKING;
1402 break;
1403 case BR_STATE_LEARNING:
1404 val = RTL8366RB_STP_STATE_LEARNING;
1405 break;
1406 case BR_STATE_FORWARDING:
1407 val = RTL8366RB_STP_STATE_FORWARDING;
1408 break;
1409 default:
1410 dev_err(priv->dev, "unknown bridge state requested\n");
1411 return;
1412 }
1413
1414 /* Set the same status for the port on all the FIDs */
1415 for (i = 0; i < RTL8366RB_NUM_FIDS; i++) {
1416 regmap_update_bits(priv->map, RTL8366RB_STP_STATE_BASE + i,
1417 RTL8366RB_STP_STATE_MASK(port),
1418 RTL8366RB_STP_STATE(port, val));
1419 }
1420 }
1421
1422 static void
rtl8366rb_port_fast_age(struct dsa_switch * ds,int port)1423 rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
1424 {
1425 struct realtek_priv *priv = ds->priv;
1426
1427 /* This will age out any learned L2 entries */
1428 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
1429 BIT(port), BIT(port));
1430 /* Restore the normal state of things */
1431 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
1432 BIT(port), 0);
1433 }
1434
rtl8366rb_change_mtu(struct dsa_switch * ds,int port,int new_mtu)1435 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
1436 {
1437 struct realtek_priv *priv = ds->priv;
1438 struct rtl8366rb *rb;
1439 unsigned int max_mtu;
1440 u32 len;
1441 int i;
1442
1443 /* Cache the per-port MTU setting */
1444 rb = priv->chip_data;
1445 rb->max_mtu[port] = new_mtu;
1446
1447 /* Roof out the MTU for the entire switch to the greatest
1448 * common denominator: the biggest set for any one port will
1449 * be the biggest MTU for the switch.
1450 */
1451 max_mtu = ETH_DATA_LEN;
1452 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) {
1453 if (rb->max_mtu[i] > max_mtu)
1454 max_mtu = rb->max_mtu[i];
1455 }
1456
1457 /* Translate to layer 2 size.
1458 * Add ethernet and (possible) VLAN headers, and checksum to the size.
1459 * For ETH_DATA_LEN (1500 bytes) this will add up to 1522 bytes.
1460 */
1461 max_mtu += VLAN_ETH_HLEN;
1462 max_mtu += ETH_FCS_LEN;
1463
1464 if (max_mtu <= 1522)
1465 len = RTL8366RB_SGCR_MAX_LENGTH_1522;
1466 else if (max_mtu > 1522 && max_mtu <= 1536)
1467 /* This will be the most common default if using VLAN and
1468 * CPU tagging on a port as both VLAN and CPU tag will
1469 * result in 1518 + 4 + 4 = 1526 bytes.
1470 */
1471 len = RTL8366RB_SGCR_MAX_LENGTH_1536;
1472 else if (max_mtu > 1536 && max_mtu <= 1552)
1473 len = RTL8366RB_SGCR_MAX_LENGTH_1552;
1474 else
1475 len = RTL8366RB_SGCR_MAX_LENGTH_16000;
1476
1477 return regmap_update_bits(priv->map, RTL8366RB_SGCR,
1478 RTL8366RB_SGCR_MAX_LENGTH_MASK,
1479 len);
1480 }
1481
rtl8366rb_max_mtu(struct dsa_switch * ds,int port)1482 static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port)
1483 {
1484 /* The max MTU is 16000 bytes, so we subtract the ethernet
1485 * headers with VLAN and checksum and arrive at
1486 * 16000 - 18 - 4 = 15978. This does not include the CPU tag
1487 * since that is added to the requested MTU by the DSA framework.
1488 */
1489 return 16000 - VLAN_ETH_HLEN - ETH_FCS_LEN;
1490 }
1491
rtl8366rb_get_vlan_4k(struct realtek_priv * priv,u32 vid,struct rtl8366_vlan_4k * vlan4k)1492 static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid,
1493 struct rtl8366_vlan_4k *vlan4k)
1494 {
1495 u32 data[3];
1496 int ret;
1497 int i;
1498
1499 memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
1500
1501 if (vid >= RTL8366RB_NUM_VIDS)
1502 return -EINVAL;
1503
1504 /* write VID */
1505 ret = regmap_write(priv->map, RTL8366RB_VLAN_TABLE_WRITE_BASE,
1506 vid & RTL8366RB_VLAN_VID_MASK);
1507 if (ret)
1508 return ret;
1509
1510 /* write table access control word */
1511 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
1512 RTL8366RB_TABLE_VLAN_READ_CTRL);
1513 if (ret)
1514 return ret;
1515
1516 for (i = 0; i < 3; i++) {
1517 ret = regmap_read(priv->map,
1518 RTL8366RB_VLAN_TABLE_READ_BASE + i,
1519 &data[i]);
1520 if (ret)
1521 return ret;
1522 }
1523
1524 vlan4k->vid = vid;
1525 vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
1526 RTL8366RB_VLAN_UNTAG_MASK;
1527 vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
1528 vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
1529
1530 return 0;
1531 }
1532
rtl8366rb_set_vlan_4k(struct realtek_priv * priv,const struct rtl8366_vlan_4k * vlan4k)1533 static int rtl8366rb_set_vlan_4k(struct realtek_priv *priv,
1534 const struct rtl8366_vlan_4k *vlan4k)
1535 {
1536 u32 data[3];
1537 int ret;
1538 int i;
1539
1540 if (vlan4k->vid >= RTL8366RB_NUM_VIDS ||
1541 vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK ||
1542 vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK ||
1543 vlan4k->fid > RTL8366RB_FIDMAX)
1544 return -EINVAL;
1545
1546 data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK;
1547 data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) |
1548 ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
1549 RTL8366RB_VLAN_UNTAG_SHIFT);
1550 data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK;
1551
1552 for (i = 0; i < 3; i++) {
1553 ret = regmap_write(priv->map,
1554 RTL8366RB_VLAN_TABLE_WRITE_BASE + i,
1555 data[i]);
1556 if (ret)
1557 return ret;
1558 }
1559
1560 /* write table access control word */
1561 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
1562 RTL8366RB_TABLE_VLAN_WRITE_CTRL);
1563
1564 return ret;
1565 }
1566
rtl8366rb_get_vlan_mc(struct realtek_priv * priv,u32 index,struct rtl8366_vlan_mc * vlanmc)1567 static int rtl8366rb_get_vlan_mc(struct realtek_priv *priv, u32 index,
1568 struct rtl8366_vlan_mc *vlanmc)
1569 {
1570 u32 data[3];
1571 int ret;
1572 int i;
1573
1574 memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
1575
1576 if (index >= RTL8366RB_NUM_VLANS)
1577 return -EINVAL;
1578
1579 for (i = 0; i < 3; i++) {
1580 ret = regmap_read(priv->map,
1581 RTL8366RB_VLAN_MC_BASE(index) + i,
1582 &data[i]);
1583 if (ret)
1584 return ret;
1585 }
1586
1587 vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK;
1588 vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) &
1589 RTL8366RB_VLAN_PRIORITY_MASK;
1590 vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
1591 RTL8366RB_VLAN_UNTAG_MASK;
1592 vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
1593 vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
1594
1595 return 0;
1596 }
1597
rtl8366rb_set_vlan_mc(struct realtek_priv * priv,u32 index,const struct rtl8366_vlan_mc * vlanmc)1598 static int rtl8366rb_set_vlan_mc(struct realtek_priv *priv, u32 index,
1599 const struct rtl8366_vlan_mc *vlanmc)
1600 {
1601 u32 data[3];
1602 int ret;
1603 int i;
1604
1605 if (index >= RTL8366RB_NUM_VLANS ||
1606 vlanmc->vid >= RTL8366RB_NUM_VIDS ||
1607 vlanmc->priority > RTL8366RB_PRIORITYMAX ||
1608 vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK ||
1609 vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK ||
1610 vlanmc->fid > RTL8366RB_FIDMAX)
1611 return -EINVAL;
1612
1613 data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) |
1614 ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) <<
1615 RTL8366RB_VLAN_PRIORITY_SHIFT);
1616 data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) |
1617 ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
1618 RTL8366RB_VLAN_UNTAG_SHIFT);
1619 data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK;
1620
1621 for (i = 0; i < 3; i++) {
1622 ret = regmap_write(priv->map,
1623 RTL8366RB_VLAN_MC_BASE(index) + i,
1624 data[i]);
1625 if (ret)
1626 return ret;
1627 }
1628
1629 return 0;
1630 }
1631
rtl8366rb_get_mc_index(struct realtek_priv * priv,int port,int * val)1632 static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val)
1633 {
1634 u32 data;
1635 int ret;
1636
1637 if (port >= priv->num_ports)
1638 return -EINVAL;
1639
1640 ret = regmap_read(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
1641 &data);
1642 if (ret)
1643 return ret;
1644
1645 *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) &
1646 RTL8366RB_PORT_VLAN_CTRL_MASK;
1647
1648 return 0;
1649 }
1650
rtl8366rb_set_mc_index(struct realtek_priv * priv,int port,int index)1651 static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index)
1652 {
1653 struct rtl8366rb *rb;
1654 bool pvid_enabled;
1655 int ret;
1656
1657 rb = priv->chip_data;
1658 pvid_enabled = !!index;
1659
1660 if (port >= priv->num_ports || index >= RTL8366RB_NUM_VLANS)
1661 return -EINVAL;
1662
1663 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
1664 RTL8366RB_PORT_VLAN_CTRL_MASK <<
1665 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
1666 (index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
1667 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
1668 if (ret)
1669 return ret;
1670
1671 rb->pvid_enabled[port] = pvid_enabled;
1672
1673 /* If VLAN filtering is enabled and PVID is also enabled, we must
1674 * not drop any untagged or C-tagged frames. Make sure to update the
1675 * filtering setting.
1676 */
1677 if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port)))
1678 ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled);
1679
1680 return ret;
1681 }
1682
rtl8366rb_is_vlan_valid(struct realtek_priv * priv,unsigned int vlan)1683 static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan)
1684 {
1685 unsigned int max = RTL8366RB_NUM_VLANS - 1;
1686
1687 if (priv->vlan4k_enabled)
1688 max = RTL8366RB_NUM_VIDS - 1;
1689
1690 if (vlan > max)
1691 return false;
1692
1693 return true;
1694 }
1695
rtl8366rb_enable_vlan(struct realtek_priv * priv,bool enable)1696 static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
1697 {
1698 dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable");
1699 return regmap_update_bits(priv->map,
1700 RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
1701 enable ? RTL8366RB_SGCR_EN_VLAN : 0);
1702 }
1703
rtl8366rb_enable_vlan4k(struct realtek_priv * priv,bool enable)1704 static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable)
1705 {
1706 dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
1707 return regmap_update_bits(priv->map, RTL8366RB_SGCR,
1708 RTL8366RB_SGCR_EN_VLAN_4KTB,
1709 enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
1710 }
1711
rtl8366rb_phy_read(struct realtek_priv * priv,int phy,int regnum)1712 static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
1713 {
1714 u32 val;
1715 u32 reg;
1716 int ret;
1717
1718 if (phy > RTL8366RB_PHY_NO_MAX)
1719 return -EINVAL;
1720
1721 mutex_lock(&priv->map_lock);
1722
1723 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
1724 RTL8366RB_PHY_CTRL_READ);
1725 if (ret)
1726 goto out;
1727
1728 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
1729
1730 ret = regmap_write(priv->map_nolock, reg, 0);
1731 if (ret) {
1732 dev_err(priv->dev,
1733 "failed to write PHY%d reg %04x @ %04x, ret %d\n",
1734 phy, regnum, reg, ret);
1735 goto out;
1736 }
1737
1738 ret = regmap_read(priv->map_nolock, RTL8366RB_PHY_ACCESS_DATA_REG,
1739 &val);
1740 if (ret)
1741 goto out;
1742
1743 ret = val;
1744
1745 dev_dbg(priv->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n",
1746 phy, regnum, reg, val);
1747
1748 out:
1749 mutex_unlock(&priv->map_lock);
1750
1751 return ret;
1752 }
1753
rtl8366rb_phy_write(struct realtek_priv * priv,int phy,int regnum,u16 val)1754 static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
1755 u16 val)
1756 {
1757 u32 reg;
1758 int ret;
1759
1760 if (phy > RTL8366RB_PHY_NO_MAX)
1761 return -EINVAL;
1762
1763 mutex_lock(&priv->map_lock);
1764
1765 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
1766 RTL8366RB_PHY_CTRL_WRITE);
1767 if (ret)
1768 goto out;
1769
1770 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
1771
1772 dev_dbg(priv->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n",
1773 phy, regnum, reg, val);
1774
1775 ret = regmap_write(priv->map_nolock, reg, val);
1776 if (ret)
1777 goto out;
1778
1779 out:
1780 mutex_unlock(&priv->map_lock);
1781
1782 return ret;
1783 }
1784
rtl8366rb_dsa_phy_read(struct dsa_switch * ds,int phy,int regnum)1785 static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
1786 {
1787 return rtl8366rb_phy_read(ds->priv, phy, regnum);
1788 }
1789
rtl8366rb_dsa_phy_write(struct dsa_switch * ds,int phy,int regnum,u16 val)1790 static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
1791 u16 val)
1792 {
1793 return rtl8366rb_phy_write(ds->priv, phy, regnum, val);
1794 }
1795
rtl8366rb_reset_chip(struct realtek_priv * priv)1796 static int rtl8366rb_reset_chip(struct realtek_priv *priv)
1797 {
1798 int timeout = 10;
1799 u32 val;
1800 int ret;
1801
1802 priv->write_reg_noack(priv, RTL8366RB_RESET_CTRL_REG,
1803 RTL8366RB_CHIP_CTRL_RESET_HW);
1804 do {
1805 usleep_range(20000, 25000);
1806 ret = regmap_read(priv->map, RTL8366RB_RESET_CTRL_REG, &val);
1807 if (ret)
1808 return ret;
1809
1810 if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW))
1811 break;
1812 } while (--timeout);
1813
1814 if (!timeout) {
1815 dev_err(priv->dev, "timeout waiting for the switch to reset\n");
1816 return -EIO;
1817 }
1818
1819 return 0;
1820 }
1821
rtl8366rb_detect(struct realtek_priv * priv)1822 static int rtl8366rb_detect(struct realtek_priv *priv)
1823 {
1824 struct device *dev = priv->dev;
1825 int ret;
1826 u32 val;
1827
1828 /* Detect device */
1829 ret = regmap_read(priv->map, 0x5c, &val);
1830 if (ret) {
1831 dev_err(dev, "can't get chip ID (%d)\n", ret);
1832 return ret;
1833 }
1834
1835 switch (val) {
1836 case 0x6027:
1837 dev_info(dev, "found an RTL8366S switch\n");
1838 dev_err(dev, "this switch is not yet supported, submit patches!\n");
1839 return -ENODEV;
1840 case 0x5937:
1841 dev_info(dev, "found an RTL8366RB switch\n");
1842 priv->cpu_port = RTL8366RB_PORT_NUM_CPU;
1843 priv->num_ports = RTL8366RB_NUM_PORTS;
1844 priv->num_vlan_mc = RTL8366RB_NUM_VLANS;
1845 priv->mib_counters = rtl8366rb_mib_counters;
1846 priv->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters);
1847 break;
1848 default:
1849 dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n",
1850 val);
1851 break;
1852 }
1853
1854 ret = rtl8366rb_reset_chip(priv);
1855 if (ret)
1856 return ret;
1857
1858 return 0;
1859 }
1860
1861 static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = {
1862 .get_tag_protocol = rtl8366_get_tag_protocol,
1863 .setup = rtl8366rb_setup,
1864 .phylink_get_caps = rtl8366rb_phylink_get_caps,
1865 .phylink_mac_link_up = rtl8366rb_mac_link_up,
1866 .phylink_mac_link_down = rtl8366rb_mac_link_down,
1867 .get_strings = rtl8366_get_strings,
1868 .get_ethtool_stats = rtl8366_get_ethtool_stats,
1869 .get_sset_count = rtl8366_get_sset_count,
1870 .port_bridge_join = rtl8366rb_port_bridge_join,
1871 .port_bridge_leave = rtl8366rb_port_bridge_leave,
1872 .port_vlan_filtering = rtl8366rb_vlan_filtering,
1873 .port_vlan_add = rtl8366_vlan_add,
1874 .port_vlan_del = rtl8366_vlan_del,
1875 .port_enable = rtl8366rb_port_enable,
1876 .port_disable = rtl8366rb_port_disable,
1877 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
1878 .port_bridge_flags = rtl8366rb_port_bridge_flags,
1879 .port_stp_state_set = rtl8366rb_port_stp_state_set,
1880 .port_fast_age = rtl8366rb_port_fast_age,
1881 .port_change_mtu = rtl8366rb_change_mtu,
1882 .port_max_mtu = rtl8366rb_max_mtu,
1883 };
1884
1885 static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = {
1886 .get_tag_protocol = rtl8366_get_tag_protocol,
1887 .setup = rtl8366rb_setup,
1888 .phy_read = rtl8366rb_dsa_phy_read,
1889 .phy_write = rtl8366rb_dsa_phy_write,
1890 .phylink_get_caps = rtl8366rb_phylink_get_caps,
1891 .phylink_mac_link_up = rtl8366rb_mac_link_up,
1892 .phylink_mac_link_down = rtl8366rb_mac_link_down,
1893 .get_strings = rtl8366_get_strings,
1894 .get_ethtool_stats = rtl8366_get_ethtool_stats,
1895 .get_sset_count = rtl8366_get_sset_count,
1896 .port_bridge_join = rtl8366rb_port_bridge_join,
1897 .port_bridge_leave = rtl8366rb_port_bridge_leave,
1898 .port_vlan_filtering = rtl8366rb_vlan_filtering,
1899 .port_vlan_add = rtl8366_vlan_add,
1900 .port_vlan_del = rtl8366_vlan_del,
1901 .port_enable = rtl8366rb_port_enable,
1902 .port_disable = rtl8366rb_port_disable,
1903 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
1904 .port_bridge_flags = rtl8366rb_port_bridge_flags,
1905 .port_stp_state_set = rtl8366rb_port_stp_state_set,
1906 .port_fast_age = rtl8366rb_port_fast_age,
1907 .port_change_mtu = rtl8366rb_change_mtu,
1908 .port_max_mtu = rtl8366rb_max_mtu,
1909 };
1910
1911 static const struct realtek_ops rtl8366rb_ops = {
1912 .detect = rtl8366rb_detect,
1913 .get_vlan_mc = rtl8366rb_get_vlan_mc,
1914 .set_vlan_mc = rtl8366rb_set_vlan_mc,
1915 .get_vlan_4k = rtl8366rb_get_vlan_4k,
1916 .set_vlan_4k = rtl8366rb_set_vlan_4k,
1917 .get_mc_index = rtl8366rb_get_mc_index,
1918 .set_mc_index = rtl8366rb_set_mc_index,
1919 .get_mib_counter = rtl8366rb_get_mib_counter,
1920 .is_vlan_valid = rtl8366rb_is_vlan_valid,
1921 .enable_vlan = rtl8366rb_enable_vlan,
1922 .enable_vlan4k = rtl8366rb_enable_vlan4k,
1923 .phy_read = rtl8366rb_phy_read,
1924 .phy_write = rtl8366rb_phy_write,
1925 };
1926
1927 const struct realtek_variant rtl8366rb_variant = {
1928 .ds_ops_smi = &rtl8366rb_switch_ops_smi,
1929 .ds_ops_mdio = &rtl8366rb_switch_ops_mdio,
1930 .ops = &rtl8366rb_ops,
1931 .clk_delay = 10,
1932 .cmd_read = 0xa9,
1933 .cmd_write = 0xa8,
1934 .chip_data_sz = sizeof(struct rtl8366rb),
1935 };
1936 EXPORT_SYMBOL_GPL(rtl8366rb_variant);
1937
1938 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1939 MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch");
1940 MODULE_LICENSE("GPL");
1941