1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 1995 Linus Torvalds
4 *
5 * This file contains the setup_arch() code, which handles the architecture-dependent
6 * parts of early kernel initialization.
7 */
8 #include <linux/acpi.h>
9 #include <linux/console.h>
10 #include <linux/crash_dump.h>
11 #include <linux/dma-map-ops.h>
12 #include <linux/dmi.h>
13 #include <linux/efi.h>
14 #include <linux/ima.h>
15 #include <linux/init_ohci1394_dma.h>
16 #include <linux/initrd.h>
17 #include <linux/iscsi_ibft.h>
18 #include <linux/memblock.h>
19 #include <linux/panic_notifier.h>
20 #include <linux/pci.h>
21 #include <linux/root_dev.h>
22 #include <linux/hugetlb.h>
23 #include <linux/tboot.h>
24 #include <linux/usb/xhci-dbgp.h>
25 #include <linux/static_call.h>
26 #include <linux/swiotlb.h>
27 #include <linux/random.h>
28
29 #include <uapi/linux/mount.h>
30
31 #include <xen/xen.h>
32
33 #include <asm/apic.h>
34 #include <asm/efi.h>
35 #include <asm/numa.h>
36 #include <asm/bios_ebda.h>
37 #include <asm/bugs.h>
38 #include <asm/cacheinfo.h>
39 #include <asm/cpu.h>
40 #include <asm/efi.h>
41 #include <asm/gart.h>
42 #include <asm/hypervisor.h>
43 #include <asm/io_apic.h>
44 #include <asm/kasan.h>
45 #include <asm/kaslr.h>
46 #include <asm/mce.h>
47 #include <asm/memtype.h>
48 #include <asm/mtrr.h>
49 #include <asm/realmode.h>
50 #include <asm/olpc_ofw.h>
51 #include <asm/pci-direct.h>
52 #include <asm/prom.h>
53 #include <asm/proto.h>
54 #include <asm/thermal.h>
55 #include <asm/unwind.h>
56 #include <asm/vsyscall.h>
57 #include <linux/vmalloc.h>
58
59 /*
60 * max_low_pfn_mapped: highest directly mapped pfn < 4 GB
61 * max_pfn_mapped: highest directly mapped pfn > 4 GB
62 *
63 * The direct mapping only covers E820_TYPE_RAM regions, so the ranges and gaps are
64 * represented by pfn_mapped[].
65 */
66 unsigned long max_low_pfn_mapped;
67 unsigned long max_pfn_mapped;
68
69 #ifdef CONFIG_DMI
70 RESERVE_BRK(dmi_alloc, 65536);
71 #endif
72
73
74 unsigned long _brk_start = (unsigned long)__brk_base;
75 unsigned long _brk_end = (unsigned long)__brk_base;
76
77 struct boot_params boot_params;
78
79 /*
80 * These are the four main kernel memory regions, we put them into
81 * the resource tree so that kdump tools and other debugging tools
82 * recover it:
83 */
84
85 static struct resource rodata_resource = {
86 .name = "Kernel rodata",
87 .start = 0,
88 .end = 0,
89 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
90 };
91
92 static struct resource data_resource = {
93 .name = "Kernel data",
94 .start = 0,
95 .end = 0,
96 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
97 };
98
99 static struct resource code_resource = {
100 .name = "Kernel code",
101 .start = 0,
102 .end = 0,
103 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
104 };
105
106 static struct resource bss_resource = {
107 .name = "Kernel bss",
108 .start = 0,
109 .end = 0,
110 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
111 };
112
113
114 #ifdef CONFIG_X86_32
115 /* CPU data as detected by the assembly code in head_32.S */
116 struct cpuinfo_x86 new_cpu_data;
117
118 struct apm_info apm_info;
119 EXPORT_SYMBOL(apm_info);
120
121 #if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
122 defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
123 struct ist_info ist_info;
124 EXPORT_SYMBOL(ist_info);
125 #else
126 struct ist_info ist_info;
127 #endif
128
129 #endif
130
131 struct cpuinfo_x86 boot_cpu_data __read_mostly;
132 EXPORT_SYMBOL(boot_cpu_data);
133
134 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
135 __visible unsigned long mmu_cr4_features __ro_after_init;
136 #else
137 __visible unsigned long mmu_cr4_features __ro_after_init = X86_CR4_PAE;
138 #endif
139
140 #ifdef CONFIG_IMA
141 static phys_addr_t ima_kexec_buffer_phys;
142 static size_t ima_kexec_buffer_size;
143 #endif
144
145 /* Boot loader ID and version as integers, for the benefit of proc_dointvec */
146 int bootloader_type, bootloader_version;
147
148 /*
149 * Setup options
150 */
151 struct screen_info screen_info;
152 EXPORT_SYMBOL(screen_info);
153 struct edid_info edid_info;
154 EXPORT_SYMBOL_GPL(edid_info);
155
156 extern int root_mountflags;
157
158 unsigned long saved_video_mode;
159
160 #define RAMDISK_IMAGE_START_MASK 0x07FF
161 #define RAMDISK_PROMPT_FLAG 0x8000
162 #define RAMDISK_LOAD_FLAG 0x4000
163
164 static char __initdata command_line[COMMAND_LINE_SIZE];
165 #ifdef CONFIG_CMDLINE_BOOL
166 static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
167 #endif
168
169 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
170 struct edd edd;
171 #ifdef CONFIG_EDD_MODULE
172 EXPORT_SYMBOL(edd);
173 #endif
174 /**
175 * copy_edd() - Copy the BIOS EDD information
176 * from boot_params into a safe place.
177 *
178 */
copy_edd(void)179 static inline void __init copy_edd(void)
180 {
181 memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
182 sizeof(edd.mbr_signature));
183 memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
184 edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
185 edd.edd_info_nr = boot_params.eddbuf_entries;
186 }
187 #else
copy_edd(void)188 static inline void __init copy_edd(void)
189 {
190 }
191 #endif
192
extend_brk(size_t size,size_t align)193 void * __init extend_brk(size_t size, size_t align)
194 {
195 size_t mask = align - 1;
196 void *ret;
197
198 BUG_ON(_brk_start == 0);
199 BUG_ON(align & mask);
200
201 _brk_end = (_brk_end + mask) & ~mask;
202 BUG_ON((char *)(_brk_end + size) > __brk_limit);
203
204 ret = (void *)_brk_end;
205 _brk_end += size;
206
207 memset(ret, 0, size);
208
209 return ret;
210 }
211
212 #ifdef CONFIG_X86_32
cleanup_highmap(void)213 static void __init cleanup_highmap(void)
214 {
215 }
216 #endif
217
reserve_brk(void)218 static void __init reserve_brk(void)
219 {
220 if (_brk_end > _brk_start)
221 memblock_reserve(__pa_symbol(_brk_start),
222 _brk_end - _brk_start);
223
224 /* Mark brk area as locked down and no longer taking any
225 new allocations */
226 _brk_start = 0;
227 }
228
229 #ifdef CONFIG_BLK_DEV_INITRD
230
get_ramdisk_image(void)231 static u64 __init get_ramdisk_image(void)
232 {
233 u64 ramdisk_image = boot_params.hdr.ramdisk_image;
234
235 ramdisk_image |= (u64)boot_params.ext_ramdisk_image << 32;
236
237 if (ramdisk_image == 0)
238 ramdisk_image = phys_initrd_start;
239
240 return ramdisk_image;
241 }
get_ramdisk_size(void)242 static u64 __init get_ramdisk_size(void)
243 {
244 u64 ramdisk_size = boot_params.hdr.ramdisk_size;
245
246 ramdisk_size |= (u64)boot_params.ext_ramdisk_size << 32;
247
248 if (ramdisk_size == 0)
249 ramdisk_size = phys_initrd_size;
250
251 return ramdisk_size;
252 }
253
relocate_initrd(void)254 static void __init relocate_initrd(void)
255 {
256 /* Assume only end is not page aligned */
257 u64 ramdisk_image = get_ramdisk_image();
258 u64 ramdisk_size = get_ramdisk_size();
259 u64 area_size = PAGE_ALIGN(ramdisk_size);
260
261 /* We need to move the initrd down into directly mapped mem */
262 u64 relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0,
263 PFN_PHYS(max_pfn_mapped));
264 if (!relocated_ramdisk)
265 panic("Cannot find place for new RAMDISK of size %lld\n",
266 ramdisk_size);
267
268 initrd_start = relocated_ramdisk + PAGE_OFFSET;
269 initrd_end = initrd_start + ramdisk_size;
270 printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
271 relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);
272
273 copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size);
274
275 printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
276 " [mem %#010llx-%#010llx]\n",
277 ramdisk_image, ramdisk_image + ramdisk_size - 1,
278 relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);
279 }
280
early_reserve_initrd(void)281 static void __init early_reserve_initrd(void)
282 {
283 /* Assume only end is not page aligned */
284 u64 ramdisk_image = get_ramdisk_image();
285 u64 ramdisk_size = get_ramdisk_size();
286 u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
287
288 if (!boot_params.hdr.type_of_loader ||
289 !ramdisk_image || !ramdisk_size)
290 return; /* No initrd provided by bootloader */
291
292 memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
293 }
294
reserve_initrd(void)295 static void __init reserve_initrd(void)
296 {
297 /* Assume only end is not page aligned */
298 u64 ramdisk_image = get_ramdisk_image();
299 u64 ramdisk_size = get_ramdisk_size();
300 u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
301
302 if (!boot_params.hdr.type_of_loader ||
303 !ramdisk_image || !ramdisk_size)
304 return; /* No initrd provided by bootloader */
305
306 initrd_start = 0;
307
308 printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image,
309 ramdisk_end - 1);
310
311 if (pfn_range_is_mapped(PFN_DOWN(ramdisk_image),
312 PFN_DOWN(ramdisk_end))) {
313 /* All are mapped, easy case */
314 initrd_start = ramdisk_image + PAGE_OFFSET;
315 initrd_end = initrd_start + ramdisk_size;
316 return;
317 }
318
319 relocate_initrd();
320
321 memblock_phys_free(ramdisk_image, ramdisk_end - ramdisk_image);
322 }
323
324 #else
early_reserve_initrd(void)325 static void __init early_reserve_initrd(void)
326 {
327 }
reserve_initrd(void)328 static void __init reserve_initrd(void)
329 {
330 }
331 #endif /* CONFIG_BLK_DEV_INITRD */
332
add_early_ima_buffer(u64 phys_addr)333 static void __init add_early_ima_buffer(u64 phys_addr)
334 {
335 #ifdef CONFIG_IMA
336 struct ima_setup_data *data;
337
338 data = early_memremap(phys_addr + sizeof(struct setup_data), sizeof(*data));
339 if (!data) {
340 pr_warn("setup: failed to memremap ima_setup_data entry\n");
341 return;
342 }
343
344 if (data->size) {
345 memblock_reserve(data->addr, data->size);
346 ima_kexec_buffer_phys = data->addr;
347 ima_kexec_buffer_size = data->size;
348 }
349
350 early_memunmap(data, sizeof(*data));
351 #else
352 pr_warn("Passed IMA kexec data, but CONFIG_IMA not set. Ignoring.\n");
353 #endif
354 }
355
356 #if defined(CONFIG_HAVE_IMA_KEXEC) && !defined(CONFIG_OF_FLATTREE)
ima_free_kexec_buffer(void)357 int __init ima_free_kexec_buffer(void)
358 {
359 if (!ima_kexec_buffer_size)
360 return -ENOENT;
361
362 memblock_free_late(ima_kexec_buffer_phys,
363 ima_kexec_buffer_size);
364
365 ima_kexec_buffer_phys = 0;
366 ima_kexec_buffer_size = 0;
367
368 return 0;
369 }
370
ima_get_kexec_buffer(void ** addr,size_t * size)371 int __init ima_get_kexec_buffer(void **addr, size_t *size)
372 {
373 if (!ima_kexec_buffer_size)
374 return -ENOENT;
375
376 *addr = __va(ima_kexec_buffer_phys);
377 *size = ima_kexec_buffer_size;
378
379 return 0;
380 }
381 #endif
382
parse_setup_data(void)383 static void __init parse_setup_data(void)
384 {
385 struct setup_data *data;
386 u64 pa_data, pa_next;
387
388 pa_data = boot_params.hdr.setup_data;
389 while (pa_data) {
390 u32 data_len, data_type;
391
392 data = early_memremap(pa_data, sizeof(*data));
393 data_len = data->len + sizeof(struct setup_data);
394 data_type = data->type;
395 pa_next = data->next;
396 early_memunmap(data, sizeof(*data));
397
398 switch (data_type) {
399 case SETUP_E820_EXT:
400 e820__memory_setup_extended(pa_data, data_len);
401 break;
402 case SETUP_DTB:
403 add_dtb(pa_data);
404 break;
405 case SETUP_EFI:
406 parse_efi_setup(pa_data, data_len);
407 break;
408 case SETUP_IMA:
409 add_early_ima_buffer(pa_data);
410 break;
411 case SETUP_RNG_SEED:
412 data = early_memremap(pa_data, data_len);
413 add_bootloader_randomness(data->data, data->len);
414 /* Zero seed for forward secrecy. */
415 memzero_explicit(data->data, data->len);
416 /* Zero length in case we find ourselves back here by accident. */
417 memzero_explicit(&data->len, sizeof(data->len));
418 early_memunmap(data, data_len);
419 break;
420 default:
421 break;
422 }
423 pa_data = pa_next;
424 }
425 }
426
memblock_x86_reserve_range_setup_data(void)427 static void __init memblock_x86_reserve_range_setup_data(void)
428 {
429 struct setup_indirect *indirect;
430 struct setup_data *data;
431 u64 pa_data, pa_next;
432 u32 len;
433
434 pa_data = boot_params.hdr.setup_data;
435 while (pa_data) {
436 data = early_memremap(pa_data, sizeof(*data));
437 if (!data) {
438 pr_warn("setup: failed to memremap setup_data entry\n");
439 return;
440 }
441
442 len = sizeof(*data);
443 pa_next = data->next;
444
445 memblock_reserve(pa_data, sizeof(*data) + data->len);
446
447 if (data->type == SETUP_INDIRECT) {
448 len += data->len;
449 early_memunmap(data, sizeof(*data));
450 data = early_memremap(pa_data, len);
451 if (!data) {
452 pr_warn("setup: failed to memremap indirect setup_data\n");
453 return;
454 }
455
456 indirect = (struct setup_indirect *)data->data;
457
458 if (indirect->type != SETUP_INDIRECT)
459 memblock_reserve(indirect->addr, indirect->len);
460 }
461
462 pa_data = pa_next;
463 early_memunmap(data, len);
464 }
465 }
466
arch_reserve_crashkernel(void)467 static void __init arch_reserve_crashkernel(void)
468 {
469 unsigned long long crash_base, crash_size, low_size = 0;
470 char *cmdline = boot_command_line;
471 bool high = false;
472 int ret;
473
474 if (!IS_ENABLED(CONFIG_KEXEC_CORE))
475 return;
476
477 ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
478 &crash_size, &crash_base,
479 &low_size, &high);
480 if (ret)
481 return;
482
483 if (xen_pv_domain()) {
484 pr_info("Ignoring crashkernel for a Xen PV domain\n");
485 return;
486 }
487
488 reserve_crashkernel_generic(cmdline, crash_size, crash_base,
489 low_size, high);
490 }
491
492 static struct resource standard_io_resources[] = {
493 { .name = "dma1", .start = 0x00, .end = 0x1f,
494 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
495 { .name = "pic1", .start = 0x20, .end = 0x21,
496 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
497 { .name = "timer0", .start = 0x40, .end = 0x43,
498 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
499 { .name = "timer1", .start = 0x50, .end = 0x53,
500 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
501 { .name = "keyboard", .start = 0x60, .end = 0x60,
502 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
503 { .name = "keyboard", .start = 0x64, .end = 0x64,
504 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
505 { .name = "dma page reg", .start = 0x80, .end = 0x8f,
506 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
507 { .name = "pic2", .start = 0xa0, .end = 0xa1,
508 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
509 { .name = "dma2", .start = 0xc0, .end = 0xdf,
510 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
511 { .name = "fpu", .start = 0xf0, .end = 0xff,
512 .flags = IORESOURCE_BUSY | IORESOURCE_IO }
513 };
514
reserve_standard_io_resources(void)515 void __init reserve_standard_io_resources(void)
516 {
517 int i;
518
519 /* request I/O space for devices used on all i[345]86 PCs */
520 for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
521 request_resource(&ioport_resource, &standard_io_resources[i]);
522
523 }
524
snb_gfx_workaround_needed(void)525 static bool __init snb_gfx_workaround_needed(void)
526 {
527 #ifdef CONFIG_PCI
528 int i;
529 u16 vendor, devid;
530 static const __initconst u16 snb_ids[] = {
531 0x0102,
532 0x0112,
533 0x0122,
534 0x0106,
535 0x0116,
536 0x0126,
537 0x010a,
538 };
539
540 /* Assume no if something weird is going on with PCI */
541 if (!early_pci_allowed())
542 return false;
543
544 vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID);
545 if (vendor != 0x8086)
546 return false;
547
548 devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID);
549 for (i = 0; i < ARRAY_SIZE(snb_ids); i++)
550 if (devid == snb_ids[i])
551 return true;
552 #endif
553
554 return false;
555 }
556
557 /*
558 * Sandy Bridge graphics has trouble with certain ranges, exclude
559 * them from allocation.
560 */
trim_snb_memory(void)561 static void __init trim_snb_memory(void)
562 {
563 static const __initconst unsigned long bad_pages[] = {
564 0x20050000,
565 0x20110000,
566 0x20130000,
567 0x20138000,
568 0x40004000,
569 };
570 int i;
571
572 if (!snb_gfx_workaround_needed())
573 return;
574
575 printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");
576
577 /*
578 * SandyBridge integrated graphics devices have a bug that prevents
579 * them from accessing certain memory ranges, namely anything below
580 * 1M and in the pages listed in bad_pages[] above.
581 *
582 * To avoid these pages being ever accessed by SNB gfx devices reserve
583 * bad_pages that have not already been reserved at boot time.
584 * All memory below the 1 MB mark is anyway reserved later during
585 * setup_arch(), so there is no need to reserve it here.
586 */
587
588 for (i = 0; i < ARRAY_SIZE(bad_pages); i++) {
589 if (memblock_reserve(bad_pages[i], PAGE_SIZE))
590 printk(KERN_WARNING "failed to reserve 0x%08lx\n",
591 bad_pages[i]);
592 }
593 }
594
trim_bios_range(void)595 static void __init trim_bios_range(void)
596 {
597 /*
598 * A special case is the first 4Kb of memory;
599 * This is a BIOS owned area, not kernel ram, but generally
600 * not listed as such in the E820 table.
601 *
602 * This typically reserves additional memory (64KiB by default)
603 * since some BIOSes are known to corrupt low memory. See the
604 * Kconfig help text for X86_RESERVE_LOW.
605 */
606 e820__range_update(0, PAGE_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);
607
608 /*
609 * special case: Some BIOSes report the PC BIOS
610 * area (640Kb -> 1Mb) as RAM even though it is not.
611 * take them out.
612 */
613 e820__range_remove(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_TYPE_RAM, 1);
614
615 e820__update_table(e820_table);
616 }
617
618 /* called before trim_bios_range() to spare extra sanitize */
e820_add_kernel_range(void)619 static void __init e820_add_kernel_range(void)
620 {
621 u64 start = __pa_symbol(_text);
622 u64 size = __pa_symbol(_end) - start;
623
624 /*
625 * Complain if .text .data and .bss are not marked as E820_TYPE_RAM and
626 * attempt to fix it by adding the range. We may have a confused BIOS,
627 * or the user may have used memmap=exactmap or memmap=xxM$yyM to
628 * exclude kernel range. If we really are running on top non-RAM,
629 * we will crash later anyways.
630 */
631 if (e820__mapped_all(start, start + size, E820_TYPE_RAM))
632 return;
633
634 pr_warn(".text .data .bss are not marked as E820_TYPE_RAM!\n");
635 e820__range_remove(start, size, E820_TYPE_RAM, 0);
636 e820__range_add(start, size, E820_TYPE_RAM);
637 }
638
early_reserve_memory(void)639 static void __init early_reserve_memory(void)
640 {
641 /*
642 * Reserve the memory occupied by the kernel between _text and
643 * __end_of_kernel_reserve symbols. Any kernel sections after the
644 * __end_of_kernel_reserve symbol must be explicitly reserved with a
645 * separate memblock_reserve() or they will be discarded.
646 */
647 memblock_reserve(__pa_symbol(_text),
648 (unsigned long)__end_of_kernel_reserve - (unsigned long)_text);
649
650 /*
651 * The first 4Kb of memory is a BIOS owned area, but generally it is
652 * not listed as such in the E820 table.
653 *
654 * Reserve the first 64K of memory since some BIOSes are known to
655 * corrupt low memory. After the real mode trampoline is allocated the
656 * rest of the memory below 640k is reserved.
657 *
658 * In addition, make sure page 0 is always reserved because on
659 * systems with L1TF its contents can be leaked to user processes.
660 */
661 memblock_reserve(0, SZ_64K);
662
663 early_reserve_initrd();
664
665 memblock_x86_reserve_range_setup_data();
666
667 reserve_bios_regions();
668 trim_snb_memory();
669 }
670
671 /*
672 * Dump out kernel offset information on panic.
673 */
674 static int
dump_kernel_offset(struct notifier_block * self,unsigned long v,void * p)675 dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
676 {
677 if (kaslr_enabled()) {
678 pr_emerg("Kernel Offset: 0x%lx from 0x%lx (relocation range: 0x%lx-0x%lx)\n",
679 kaslr_offset(),
680 __START_KERNEL,
681 __START_KERNEL_map,
682 MODULES_VADDR-1);
683 } else {
684 pr_emerg("Kernel Offset: disabled\n");
685 }
686
687 return 0;
688 }
689
x86_configure_nx(void)690 void x86_configure_nx(void)
691 {
692 if (boot_cpu_has(X86_FEATURE_NX))
693 __supported_pte_mask |= _PAGE_NX;
694 else
695 __supported_pte_mask &= ~_PAGE_NX;
696 }
697
x86_report_nx(void)698 static void __init x86_report_nx(void)
699 {
700 if (!boot_cpu_has(X86_FEATURE_NX)) {
701 printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
702 "missing in CPU!\n");
703 } else {
704 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
705 printk(KERN_INFO "NX (Execute Disable) protection: active\n");
706 #else
707 /* 32bit non-PAE kernel, NX cannot be used */
708 printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
709 "cannot be enabled: non-PAE kernel!\n");
710 #endif
711 }
712 }
713
714 /*
715 * Determine if we were loaded by an EFI loader. If so, then we have also been
716 * passed the efi memmap, systab, etc., so we should use these data structures
717 * for initialization. Note, the efi init code path is determined by the
718 * global efi_enabled. This allows the same kernel image to be used on existing
719 * systems (with a traditional BIOS) as well as on EFI systems.
720 */
721 /*
722 * setup_arch - architecture-specific boot-time initializations
723 *
724 * Note: On x86_64, fixmaps are ready for use even before this is called.
725 */
726
setup_arch(char ** cmdline_p)727 void __init setup_arch(char **cmdline_p)
728 {
729 #ifdef CONFIG_X86_32
730 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
731
732 /*
733 * copy kernel address range established so far and switch
734 * to the proper swapper page table
735 */
736 clone_pgd_range(swapper_pg_dir + KERNEL_PGD_BOUNDARY,
737 initial_page_table + KERNEL_PGD_BOUNDARY,
738 KERNEL_PGD_PTRS);
739
740 load_cr3(swapper_pg_dir);
741 /*
742 * Note: Quark X1000 CPUs advertise PGE incorrectly and require
743 * a cr3 based tlb flush, so the following __flush_tlb_all()
744 * will not flush anything because the CPU quirk which clears
745 * X86_FEATURE_PGE has not been invoked yet. Though due to the
746 * load_cr3() above the TLB has been flushed already. The
747 * quirk is invoked before subsequent calls to __flush_tlb_all()
748 * so proper operation is guaranteed.
749 */
750 __flush_tlb_all();
751 #else
752 printk(KERN_INFO "Command line: %s\n", boot_command_line);
753 boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS;
754 #endif
755
756 /*
757 * If we have OLPC OFW, we might end up relocating the fixmap due to
758 * reserve_top(), so do this before touching the ioremap area.
759 */
760 olpc_ofw_detect();
761
762 idt_setup_early_traps();
763 early_cpu_init();
764 jump_label_init();
765 static_call_init();
766 early_ioremap_init();
767
768 setup_olpc_ofw_pgd();
769
770 ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
771 screen_info = boot_params.screen_info;
772 edid_info = boot_params.edid_info;
773 #ifdef CONFIG_X86_32
774 apm_info.bios = boot_params.apm_bios_info;
775 ist_info = boot_params.ist_info;
776 #endif
777 saved_video_mode = boot_params.hdr.vid_mode;
778 bootloader_type = boot_params.hdr.type_of_loader;
779 if ((bootloader_type >> 4) == 0xe) {
780 bootloader_type &= 0xf;
781 bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
782 }
783 bootloader_version = bootloader_type & 0xf;
784 bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
785
786 #ifdef CONFIG_BLK_DEV_RAM
787 rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
788 #endif
789 #ifdef CONFIG_EFI
790 if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
791 EFI32_LOADER_SIGNATURE, 4)) {
792 set_bit(EFI_BOOT, &efi.flags);
793 } else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
794 EFI64_LOADER_SIGNATURE, 4)) {
795 set_bit(EFI_BOOT, &efi.flags);
796 set_bit(EFI_64BIT, &efi.flags);
797 }
798 #endif
799
800 x86_init.oem.arch_setup();
801
802 /*
803 * Do some memory reservations *before* memory is added to memblock, so
804 * memblock allocations won't overwrite it.
805 *
806 * After this point, everything still needed from the boot loader or
807 * firmware or kernel text should be early reserved or marked not RAM in
808 * e820. All other memory is free game.
809 *
810 * This call needs to happen before e820__memory_setup() which calls the
811 * xen_memory_setup() on Xen dom0 which relies on the fact that those
812 * early reservations have happened already.
813 */
814 early_reserve_memory();
815
816 iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
817 e820__memory_setup();
818 parse_setup_data();
819
820 copy_edd();
821
822 if (!boot_params.hdr.root_flags)
823 root_mountflags &= ~MS_RDONLY;
824 setup_initial_init_mm(_text, _etext, _edata, (void *)_brk_end);
825
826 code_resource.start = __pa_symbol(_text);
827 code_resource.end = __pa_symbol(_etext)-1;
828 rodata_resource.start = __pa_symbol(__start_rodata);
829 rodata_resource.end = __pa_symbol(__end_rodata)-1;
830 data_resource.start = __pa_symbol(_sdata);
831 data_resource.end = __pa_symbol(_edata)-1;
832 bss_resource.start = __pa_symbol(__bss_start);
833 bss_resource.end = __pa_symbol(__bss_stop)-1;
834
835 #ifdef CONFIG_CMDLINE_BOOL
836 #ifdef CONFIG_CMDLINE_OVERRIDE
837 strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
838 #else
839 if (builtin_cmdline[0]) {
840 /* append boot loader cmdline to builtin */
841 strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
842 strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
843 strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
844 }
845 #endif
846 #endif
847
848 strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
849 *cmdline_p = command_line;
850
851 /*
852 * x86_configure_nx() is called before parse_early_param() to detect
853 * whether hardware doesn't support NX (so that the early EHCI debug
854 * console setup can safely call set_fixmap()).
855 */
856 x86_configure_nx();
857
858 parse_early_param();
859
860 if (efi_enabled(EFI_BOOT))
861 efi_memblock_x86_reserve_range();
862
863 #ifdef CONFIG_MEMORY_HOTPLUG
864 /*
865 * Memory used by the kernel cannot be hot-removed because Linux
866 * cannot migrate the kernel pages. When memory hotplug is
867 * enabled, we should prevent memblock from allocating memory
868 * for the kernel.
869 *
870 * ACPI SRAT records all hotpluggable memory ranges. But before
871 * SRAT is parsed, we don't know about it.
872 *
873 * The kernel image is loaded into memory at very early time. We
874 * cannot prevent this anyway. So on NUMA system, we set any
875 * node the kernel resides in as un-hotpluggable.
876 *
877 * Since on modern servers, one node could have double-digit
878 * gigabytes memory, we can assume the memory around the kernel
879 * image is also un-hotpluggable. So before SRAT is parsed, just
880 * allocate memory near the kernel image to try the best to keep
881 * the kernel away from hotpluggable memory.
882 */
883 if (movable_node_is_enabled())
884 memblock_set_bottom_up(true);
885 #endif
886
887 x86_report_nx();
888
889 apic_setup_apic_calls();
890
891 if (acpi_mps_check()) {
892 #ifdef CONFIG_X86_LOCAL_APIC
893 apic_is_disabled = true;
894 #endif
895 setup_clear_cpu_cap(X86_FEATURE_APIC);
896 }
897
898 e820__reserve_setup_data();
899 e820__finish_early_params();
900
901 if (efi_enabled(EFI_BOOT))
902 efi_init();
903
904 reserve_ibft_region();
905 dmi_setup();
906
907 /*
908 * VMware detection requires dmi to be available, so this
909 * needs to be done after dmi_setup(), for the boot CPU.
910 * For some guest types (Xen PV, SEV-SNP, TDX) it is required to be
911 * called before cache_bp_init() for setting up MTRR state.
912 */
913 init_hypervisor_platform();
914
915 tsc_early_init();
916 x86_init.resources.probe_roms();
917
918 /* after parse_early_param, so could debug it */
919 insert_resource(&iomem_resource, &code_resource);
920 insert_resource(&iomem_resource, &rodata_resource);
921 insert_resource(&iomem_resource, &data_resource);
922 insert_resource(&iomem_resource, &bss_resource);
923
924 e820_add_kernel_range();
925 trim_bios_range();
926 #ifdef CONFIG_X86_32
927 if (ppro_with_ram_bug()) {
928 e820__range_update(0x70000000ULL, 0x40000ULL, E820_TYPE_RAM,
929 E820_TYPE_RESERVED);
930 e820__update_table(e820_table);
931 printk(KERN_INFO "fixed physical RAM map:\n");
932 e820__print_table("bad_ppro");
933 }
934 #else
935 early_gart_iommu_check();
936 #endif
937
938 /*
939 * partially used pages are not usable - thus
940 * we are rounding upwards:
941 */
942 max_pfn = e820__end_of_ram_pfn();
943
944 /* update e820 for memory not covered by WB MTRRs */
945 cache_bp_init();
946 if (mtrr_trim_uncached_memory(max_pfn))
947 max_pfn = e820__end_of_ram_pfn();
948
949 max_possible_pfn = max_pfn;
950
951 /*
952 * Define random base addresses for memory sections after max_pfn is
953 * defined and before each memory section base is used.
954 */
955 kernel_randomize_memory();
956
957 #ifdef CONFIG_X86_32
958 /* max_low_pfn get updated here */
959 find_low_pfn_range();
960 #else
961 check_x2apic();
962
963 /* How many end-of-memory variables you have, grandma! */
964 /* need this before calling reserve_initrd */
965 if (max_pfn > (1UL<<(32 - PAGE_SHIFT)))
966 max_low_pfn = e820__end_of_low_ram_pfn();
967 else
968 max_low_pfn = max_pfn;
969
970 high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
971 #endif
972
973 /*
974 * Find and reserve possible boot-time SMP configuration:
975 */
976 find_smp_config();
977
978 early_alloc_pgt_buf();
979
980 /*
981 * Need to conclude brk, before e820__memblock_setup()
982 * it could use memblock_find_in_range, could overlap with
983 * brk area.
984 */
985 reserve_brk();
986
987 cleanup_highmap();
988
989 memblock_set_current_limit(ISA_END_ADDRESS);
990 e820__memblock_setup();
991
992 /*
993 * Needs to run after memblock setup because it needs the physical
994 * memory size.
995 */
996 mem_encrypt_setup_arch();
997
998 efi_fake_memmap();
999 efi_find_mirror();
1000 efi_esrt_init();
1001 efi_mokvar_table_init();
1002
1003 /*
1004 * The EFI specification says that boot service code won't be
1005 * called after ExitBootServices(). This is, in fact, a lie.
1006 */
1007 efi_reserve_boot_services();
1008
1009 /* preallocate 4k for mptable mpc */
1010 e820__memblock_alloc_reserved_mpc_new();
1011
1012 #ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
1013 setup_bios_corruption_check();
1014 #endif
1015
1016 #ifdef CONFIG_X86_32
1017 printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n",
1018 (max_pfn_mapped<<PAGE_SHIFT) - 1);
1019 #endif
1020
1021 /*
1022 * Find free memory for the real mode trampoline and place it there. If
1023 * there is not enough free memory under 1M, on EFI-enabled systems
1024 * there will be additional attempt to reclaim the memory for the real
1025 * mode trampoline at efi_free_boot_services().
1026 *
1027 * Unconditionally reserve the entire first 1M of RAM because BIOSes
1028 * are known to corrupt low memory and several hundred kilobytes are not
1029 * worth complex detection what memory gets clobbered. Windows does the
1030 * same thing for very similar reasons.
1031 *
1032 * Moreover, on machines with SandyBridge graphics or in setups that use
1033 * crashkernel the entire 1M is reserved anyway.
1034 *
1035 * Note the host kernel TDX also requires the first 1MB being reserved.
1036 */
1037 x86_platform.realmode_reserve();
1038
1039 init_mem_mapping();
1040
1041 idt_setup_early_pf();
1042
1043 /*
1044 * Update mmu_cr4_features (and, indirectly, trampoline_cr4_features)
1045 * with the current CR4 value. This may not be necessary, but
1046 * auditing all the early-boot CR4 manipulation would be needed to
1047 * rule it out.
1048 *
1049 * Mask off features that don't work outside long mode (just
1050 * PCIDE for now).
1051 */
1052 mmu_cr4_features = __read_cr4() & ~X86_CR4_PCIDE;
1053
1054 memblock_set_current_limit(get_max_mapped());
1055
1056 /*
1057 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
1058 */
1059
1060 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
1061 if (init_ohci1394_dma_early)
1062 init_ohci1394_dma_on_all_controllers();
1063 #endif
1064 /* Allocate bigger log buffer */
1065 setup_log_buf(1);
1066
1067 if (efi_enabled(EFI_BOOT)) {
1068 switch (boot_params.secure_boot) {
1069 case efi_secureboot_mode_disabled:
1070 pr_info("Secure boot disabled\n");
1071 break;
1072 case efi_secureboot_mode_enabled:
1073 pr_info("Secure boot enabled\n");
1074 break;
1075 default:
1076 pr_info("Secure boot could not be determined\n");
1077 break;
1078 }
1079 }
1080
1081 reserve_initrd();
1082
1083 acpi_table_upgrade();
1084 /* Look for ACPI tables and reserve memory occupied by them. */
1085 acpi_boot_table_init();
1086
1087 vsmp_init();
1088
1089 io_delay_init();
1090
1091 early_platform_quirks();
1092
1093 early_acpi_boot_init();
1094
1095 x86_flattree_get_config();
1096
1097 initmem_init();
1098 dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
1099
1100 if (boot_cpu_has(X86_FEATURE_GBPAGES))
1101 hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
1102
1103 /*
1104 * Reserve memory for crash kernel after SRAT is parsed so that it
1105 * won't consume hotpluggable memory.
1106 */
1107 arch_reserve_crashkernel();
1108
1109 memblock_find_dma_reserve();
1110
1111 if (!early_xdbc_setup_hardware())
1112 early_xdbc_register_console();
1113
1114 x86_init.paging.pagetable_init();
1115
1116 kasan_init();
1117
1118 /*
1119 * Sync back kernel address range.
1120 *
1121 * FIXME: Can the later sync in setup_cpu_entry_areas() replace
1122 * this call?
1123 */
1124 sync_initial_page_table();
1125
1126 tboot_probe();
1127
1128 map_vsyscall();
1129
1130 x86_32_probe_apic();
1131
1132 early_quirks();
1133
1134 /*
1135 * Read APIC and some other early information from ACPI tables.
1136 */
1137 acpi_boot_init();
1138 x86_dtb_init();
1139
1140 /*
1141 * get boot-time SMP configuration:
1142 */
1143 get_smp_config();
1144
1145 /*
1146 * Systems w/o ACPI and mptables might not have it mapped the local
1147 * APIC yet, but prefill_possible_map() might need to access it.
1148 */
1149 init_apic_mappings();
1150
1151 prefill_possible_map();
1152
1153 init_cpu_to_node();
1154 init_gi_nodes();
1155
1156 io_apic_init_mappings();
1157
1158 x86_init.hyper.guest_late_init();
1159
1160 e820__reserve_resources();
1161 e820__register_nosave_regions(max_pfn);
1162
1163 x86_init.resources.reserve_resources();
1164
1165 e820__setup_pci_gap();
1166
1167 #ifdef CONFIG_VT
1168 #if defined(CONFIG_VGA_CONSOLE)
1169 if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
1170 vgacon_register_screen(&screen_info);
1171 #endif
1172 #endif
1173 x86_init.oem.banner();
1174
1175 x86_init.timers.wallclock_init();
1176
1177 /*
1178 * This needs to run before setup_local_APIC() which soft-disables the
1179 * local APIC temporarily and that masks the thermal LVT interrupt,
1180 * leading to softlockups on machines which have configured SMI
1181 * interrupt delivery.
1182 */
1183 therm_lvt_init();
1184
1185 mcheck_init();
1186
1187 register_refined_jiffies(CLOCK_TICK_RATE);
1188
1189 #ifdef CONFIG_EFI
1190 if (efi_enabled(EFI_BOOT))
1191 efi_apply_memmap_quirks();
1192 #endif
1193
1194 unwind_init();
1195 }
1196
1197 #ifdef CONFIG_X86_32
1198
1199 static struct resource video_ram_resource = {
1200 .name = "Video RAM area",
1201 .start = 0xa0000,
1202 .end = 0xbffff,
1203 .flags = IORESOURCE_BUSY | IORESOURCE_MEM
1204 };
1205
i386_reserve_resources(void)1206 void __init i386_reserve_resources(void)
1207 {
1208 request_resource(&iomem_resource, &video_ram_resource);
1209 reserve_standard_io_resources();
1210 }
1211
1212 #endif /* CONFIG_X86_32 */
1213
1214 static struct notifier_block kernel_offset_notifier = {
1215 .notifier_call = dump_kernel_offset
1216 };
1217
register_kernel_offset_dumper(void)1218 static int __init register_kernel_offset_dumper(void)
1219 {
1220 atomic_notifier_chain_register(&panic_notifier_list,
1221 &kernel_offset_notifier);
1222 return 0;
1223 }
1224 __initcall(register_kernel_offset_dumper);
1225