1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Xilinx CC108 board DTS
4 *
5 * (C) Copyright 2007-2018 Xilinx, Inc.
6 * (C) Copyright 2007-2013 Michal Simek
7 * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
8 *
9 * Michal SIMEK <monstr@monstr.eu>
10 */
11/dts-v1/;
12/include/ "zynq-7000.dtsi"
13
14/ {
15	model = "Xilinx CC108 board";
16	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
17
18	aliases {
19		ethernet0 = &gem0;
20		serial0 = &uart0;
21		spi0 = &qspi;
22	};
23
24	chosen {
25		bootargs = "";
26		stdout-path = "serial0:115200n8";
27	};
28
29	memory@0 {
30		device_type = "memory";
31		reg = <0x0 0x20000000>;
32	};
33
34	usb_phy0: phy0 {
35		compatible = "usb-nop-xceiv";
36		#phy-cells = <0>;
37	};
38
39	usb_phy1: phy1 {
40		compatible = "usb-nop-xceiv";
41		#phy-cells = <0>;
42	};
43};
44
45&gem0 {
46	status = "okay";
47	phy-mode = "rgmii-id";
48	phy-handle = <&ethernet_phy>;
49
50	ethernet_phy: ethernet-phy@1 {
51		reg = <1>;
52	};
53};
54
55&qspi {
56	status = "okay";
57	num-cs = <1>;
58	flash@0 { /* 16 MB */
59		compatible = "jedec,spi-nor";
60		reg = <0x0>;
61		spi-max-frequency = <50000000>;
62		spi-tx-bus-width = <1>;
63		spi-rx-bus-width = <4>;
64		#address-cells = <1>;
65		#size-cells = <1>;
66		partition@0 {
67			label = "qspi-fsbl-uboot-bs";
68			reg = <0x0 0x400000>; /* 4MB */
69		};
70		partition@400000 {
71			label = "qspi-linux";
72			reg = <0x400000 0x400000>; /* 4MB */
73		};
74		partition@800000 {
75			label = "qspi-rootfs";
76			reg = <0x800000 0x400000>; /* 4MB */
77		};
78		partition@c00000 {
79			label = "qspi-devicetree";
80			reg = <0xc00000 0x100000>; /* 1MB */
81		};
82		partition@d00000 {
83			label = "qspi-scratch";
84			reg = <0xd00000 0x200000>; /* 2MB */
85		};
86		partition@f00000 {
87			label = "qspi-uboot-env";
88			reg = <0xf00000 0x100000>; /* 1MB */
89		};
90	};
91};
92
93&sdhci1 {
94	status = "okay";
95	broken-cd ;
96	wp-inverted ;
97};
98
99&uart0 {
100	bootph-all;
101	status = "okay";
102};
103
104&usb0 {
105	status = "okay";
106	dr_mode = "host";
107	usb-phy = <&usb_phy0>;
108};
109
110&usb1 {
111	status = "okay";
112	dr_mode = "host";
113	usb-phy = <&usb_phy1>;
114};
115