1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Rockchip RK3xxx I2C controller 8 9description: 10 This driver interfaces with the native I2C controller present in Rockchip 11 RK3xxx SoCs. 12 13allOf: 14 - $ref: /schemas/i2c/i2c-controller.yaml# 15 16maintainers: 17 - Heiko Stuebner <heiko@sntech.de> 18 19# Everything else is described in the common file 20properties: 21 compatible: 22 oneOf: 23 - const: rockchip,rv1108-i2c 24 - const: rockchip,rk3066-i2c 25 - const: rockchip,rk3188-i2c 26 - const: rockchip,rk3228-i2c 27 - const: rockchip,rk3288-i2c 28 - const: rockchip,rk3399-i2c 29 - items: 30 - enum: 31 - rockchip,rk3036-i2c 32 - rockchip,rk3128-i2c 33 - rockchip,rk3368-i2c 34 - const: rockchip,rk3288-i2c 35 - items: 36 - enum: 37 - rockchip,px30-i2c 38 - rockchip,rk3308-i2c 39 - rockchip,rk3328-i2c 40 - rockchip,rk3562-i2c 41 - rockchip,rk3568-i2c 42 - rockchip,rk3576-i2c 43 - rockchip,rk3588-i2c 44 - rockchip,rv1126-i2c 45 - const: rockchip,rk3399-i2c 46 47 reg: 48 maxItems: 1 49 50 interrupts: 51 maxItems: 1 52 53 clocks: 54 minItems: 1 55 items: 56 - description: 57 For older hardware (rk3066, rk3188, rk3228, rk3288) 58 there is one clock that is used both to derive the functional clock 59 for the device and as the bus clock. 60 For newer hardware (rk3399) this clock is used to derive 61 the functional clock 62 - description: 63 For newer hardware (rk3399) this is the bus clock 64 65 clock-names: 66 minItems: 1 67 items: 68 - const: i2c 69 - const: pclk 70 71 rockchip,grf: 72 $ref: /schemas/types.yaml#/definitions/phandle 73 description: 74 Required on RK3066, RK3188 the phandle of the syscon node for 75 the general register file (GRF) 76 On those SoCs an alias with the correct I2C bus ID 77 (bit offset in the GRF) is also required. 78 79 clock-frequency: 80 default: 100000 81 description: 82 SCL frequency to use (in Hz). If omitted, 100kHz is used. 83 84 i2c-scl-rising-time-ns: 85 default: 1000 86 description: 87 Number of nanoseconds the SCL signal takes to rise 88 (t(r) in I2C specification). If not specified this is assumed to be 89 the maximum the specification allows(1000 ns for Standard-mode, 90 300 ns for Fast-mode) which might cause slightly slower communication. 91 92 i2c-scl-falling-time-ns: 93 default: 300 94 description: 95 Number of nanoseconds the SCL signal takes to fall 96 (t(f) in the I2C specification). If not specified this is assumed to 97 be the maximum the specification allows (300 ns) which might cause 98 slightly slower communication. 99 100 i2c-sda-falling-time-ns: 101 default: 300 102 description: 103 Number of nanoseconds the SDA signal takes to fall 104 (t(f) in the I2C specification). If not specified we will use the SCL 105 value since they are the same in nearly all cases. 106 107required: 108 - compatible 109 - reg 110 - interrupts 111 - clocks 112 - clock-names 113 114if: 115 properties: 116 compatible: 117 contains: 118 enum: 119 - rockchip,rk3066-i2c 120 - rockchip,rk3188-i2c 121 122then: 123 required: 124 - rockchip,grf 125 126unevaluatedProperties: false 127 128examples: 129 - | 130 #include <dt-bindings/clock/rk3188-cru-common.h> 131 #include <dt-bindings/interrupt-controller/arm-gic.h> 132 #include <dt-bindings/interrupt-controller/irq.h> 133 i2c0: i2c@2002d000 { 134 compatible = "rockchip,rk3188-i2c"; 135 reg = <0x2002d000 0x1000>; 136 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 137 clocks = <&cru PCLK_I2C0>; 138 clock-names = "i2c"; 139 rockchip,grf = <&grf>; 140 i2c-scl-falling-time-ns = <100>; 141 i2c-scl-rising-time-ns = <800>; 142 #address-cells = <1>; 143 #size-cells = <0>; 144 }; 145