1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Copyright (c) 2005-2008 Simtec Electronics
4 //	http://armlinux.simtec.co.uk/
5 //	Ben Dooks <ben@simtec.co.uk>
6 
7 #include <linux/kernel.h>
8 #include <linux/types.h>
9 #include <linux/interrupt.h>
10 #include <linux/list.h>
11 #include <linux/timer.h>
12 #include <linux/init.h>
13 #include <linux/gpio.h>
14 #include <linux/device.h>
15 #include <linux/syscore_ops.h>
16 #include <linux/serial_core.h>
17 #include <linux/serial_s3c.h>
18 #include <linux/clk.h>
19 #include <linux/i2c.h>
20 #include <linux/io.h>
21 #include <linux/platform_device.h>
22 
23 #include <linux/mfd/tps65010.h>
24 
25 #include <asm/mach-types.h>
26 #include <asm/mach/arch.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/irq.h>
29 #include <asm/irq.h>
30 
31 #include <linux/platform_data/mtd-nand-s3c2410.h>
32 #include <linux/platform_data/i2c-s3c2410.h>
33 
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/rawnand.h>
36 #include <linux/mtd/nand_ecc.h>
37 #include <linux/mtd/partitions.h>
38 
39 #include "cpu.h"
40 #include <linux/soc/samsung/s3c-cpu-freq.h>
41 #include "devs.h"
42 #include "gpio-cfg.h"
43 
44 #include "regs-gpio.h"
45 #include "gpio-samsung.h"
46 
47 #include "s3c24xx.h"
48 #include "osiris.h"
49 #include "regs-mem-s3c24xx.h"
50 
51 /* onboard perihperal map */
52 
53 static struct map_desc osiris_iodesc[] __initdata = {
54   /* ISA IO areas (may be over-written later) */
55 
56   {
57 	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
58 	  .pfn		= __phys_to_pfn(S3C2410_CS5),
59 	  .length	= SZ_16M,
60 	  .type		= MT_DEVICE,
61   }, {
62 	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
63 	  .pfn		= __phys_to_pfn(S3C2410_CS5),
64 	  .length	= SZ_16M,
65 	  .type		= MT_DEVICE,
66   },
67 
68   /* CPLD control registers */
69 
70   {
71 	  .virtual	= (u32)OSIRIS_VA_CTRL0,
72 	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
73 	  .length	= SZ_16K,
74 	  .type		= MT_DEVICE,
75   }, {
76 	  .virtual	= (u32)OSIRIS_VA_CTRL1,
77 	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
78 	  .length	= SZ_16K,
79 	  .type		= MT_DEVICE,
80   }, {
81 	  .virtual	= (u32)OSIRIS_VA_CTRL2,
82 	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
83 	  .length	= SZ_16K,
84 	  .type		= MT_DEVICE,
85   }, {
86 	  .virtual	= (u32)OSIRIS_VA_IDREG,
87 	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
88 	  .length	= SZ_16K,
89 	  .type		= MT_DEVICE,
90   },
91 };
92 
93 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
94 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
95 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
96 
97 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
98 	[0] = {
99 		.hwport	     = 0,
100 		.flags	     = 0,
101 		.ucon	     = UCON,
102 		.ulcon	     = ULCON,
103 		.ufcon	     = UFCON,
104 		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
105 	},
106 	[1] = {
107 		.hwport	     = 1,
108 		.flags	     = 0,
109 		.ucon	     = UCON,
110 		.ulcon	     = ULCON,
111 		.ufcon	     = UFCON,
112 		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
113 	},
114 	[2] = {
115 		.hwport	     = 2,
116 		.flags	     = 0,
117 		.ucon	     = UCON,
118 		.ulcon	     = ULCON,
119 		.ufcon	     = UFCON,
120 		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
121 	}
122 };
123 
124 /* NAND Flash on Osiris board */
125 
126 static int external_map[]   = { 2 };
127 static int chip0_map[]      = { 0 };
128 static int chip1_map[]      = { 1 };
129 
130 static struct mtd_partition __initdata osiris_default_nand_part[] = {
131 	[0] = {
132 		.name	= "Boot Agent",
133 		.size	= SZ_16K,
134 		.offset	= 0,
135 	},
136 	[1] = {
137 		.name	= "/boot",
138 		.size	= SZ_4M - SZ_16K,
139 		.offset	= SZ_16K,
140 	},
141 	[2] = {
142 		.name	= "user1",
143 		.offset	= SZ_4M,
144 		.size	= SZ_32M - SZ_4M,
145 	},
146 	[3] = {
147 		.name	= "user2",
148 		.offset	= SZ_32M,
149 		.size	= MTDPART_SIZ_FULL,
150 	}
151 };
152 
153 static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
154 	[0] = {
155 		.name	= "Boot Agent",
156 		.size	= SZ_128K,
157 		.offset	= 0,
158 	},
159 	[1] = {
160 		.name	= "/boot",
161 		.size	= SZ_4M - SZ_128K,
162 		.offset	= SZ_128K,
163 	},
164 	[2] = {
165 		.name	= "user1",
166 		.offset	= SZ_4M,
167 		.size	= SZ_32M - SZ_4M,
168 	},
169 	[3] = {
170 		.name	= "user2",
171 		.offset	= SZ_32M,
172 		.size	= MTDPART_SIZ_FULL,
173 	}
174 };
175 
176 /* the Osiris has 3 selectable slots for nand-flash, the two
177  * on-board chip areas, as well as the external slot.
178  *
179  * Note, there is no current hot-plug support for the External
180  * socket.
181 */
182 
183 static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
184 	[1] = {
185 		.name		= "External",
186 		.nr_chips	= 1,
187 		.nr_map		= external_map,
188 		.options	= NAND_SCAN_SILENT_NODEV,
189 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
190 		.partitions	= osiris_default_nand_part,
191 	},
192 	[0] = {
193 		.name		= "chip0",
194 		.nr_chips	= 1,
195 		.nr_map		= chip0_map,
196 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
197 		.partitions	= osiris_default_nand_part,
198 	},
199 	[2] = {
200 		.name		= "chip1",
201 		.nr_chips	= 1,
202 		.nr_map		= chip1_map,
203 		.options	= NAND_SCAN_SILENT_NODEV,
204 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
205 		.partitions	= osiris_default_nand_part,
206 	},
207 };
208 
osiris_nand_select(struct s3c2410_nand_set * set,int slot)209 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
210 {
211 	unsigned int tmp;
212 
213 	slot = set->nr_map[slot] & 3;
214 
215 	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
216 		 slot, set, set->nr_map);
217 
218 	tmp = __raw_readb(OSIRIS_VA_CTRL0);
219 	tmp &= ~OSIRIS_CTRL0_NANDSEL;
220 	tmp |= slot;
221 
222 	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
223 
224 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
225 }
226 
227 static struct s3c2410_platform_nand __initdata osiris_nand_info = {
228 	.tacls		= 25,
229 	.twrph0		= 60,
230 	.twrph1		= 60,
231 	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
232 	.sets		= osiris_nand_sets,
233 	.select_chip	= osiris_nand_select,
234 	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
235 };
236 
237 /* PCMCIA control and configuration */
238 
239 static struct resource osiris_pcmcia_resource[] = {
240 	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
241 	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
242 };
243 
244 static struct platform_device osiris_pcmcia = {
245 	.name		= "osiris-pcmcia",
246 	.id		= -1,
247 	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
248 	.resource	= osiris_pcmcia_resource,
249 };
250 
251 /* Osiris power management device */
252 
253 #ifdef CONFIG_PM
254 static unsigned char pm_osiris_ctrl0;
255 
osiris_pm_suspend(void)256 static int osiris_pm_suspend(void)
257 {
258 	unsigned int tmp;
259 
260 	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
261 	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
262 
263 	/* ensure correct NAND slot is selected on resume */
264 	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
265 	        tmp |= 2;
266 
267 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
268 
269 	/* ensure that an nRESET is not generated on resume. */
270 	gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
271 	gpio_free(S3C2410_GPA(21));
272 
273 	return 0;
274 }
275 
osiris_pm_resume(void)276 static void osiris_pm_resume(void)
277 {
278 	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
279 		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
280 
281 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
282 
283 	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
284 }
285 
286 #else
287 #define osiris_pm_suspend NULL
288 #define osiris_pm_resume NULL
289 #endif
290 
291 static struct syscore_ops osiris_pm_syscore_ops = {
292 	.suspend	= osiris_pm_suspend,
293 	.resume		= osiris_pm_resume,
294 };
295 
296 /* Link for DVS driver to TPS65011 */
297 
osiris_tps_release(struct device * dev)298 static void osiris_tps_release(struct device *dev)
299 {
300 	/* static device, do not need to release anything */
301 }
302 
303 static struct platform_device osiris_tps_device = {
304 	.name	= "osiris-dvs",
305 	.id	= -1,
306 	.dev.release = osiris_tps_release,
307 };
308 
osiris_tps_setup(struct i2c_client * client,void * context)309 static int osiris_tps_setup(struct i2c_client *client, void *context)
310 {
311 	osiris_tps_device.dev.parent = &client->dev;
312 	return platform_device_register(&osiris_tps_device);
313 }
314 
osiris_tps_remove(struct i2c_client * client,void * context)315 static int osiris_tps_remove(struct i2c_client *client, void *context)
316 {
317 	platform_device_unregister(&osiris_tps_device);
318 	return 0;
319 }
320 
321 static struct tps65010_board osiris_tps_board = {
322 	.base		= -1,	/* GPIO can go anywhere at the moment */
323 	.setup		= osiris_tps_setup,
324 	.teardown	= osiris_tps_remove,
325 };
326 
327 /* I2C devices fitted. */
328 
329 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
330 	{
331 		I2C_BOARD_INFO("tps65011", 0x48),
332 		.irq	= IRQ_EINT20,
333 		.platform_data = &osiris_tps_board,
334 	},
335 };
336 
337 /* Standard Osiris devices */
338 
339 static struct platform_device *osiris_devices[] __initdata = {
340 	&s3c2410_device_dclk,
341 	&s3c_device_i2c0,
342 	&s3c_device_wdt,
343 	&s3c_device_nand,
344 	&osiris_pcmcia,
345 };
346 
347 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
348 	.refresh	= 7800, /* refresh period is 7.8usec */
349 	.auto_io	= 1,
350 	.need_io	= 1,
351 };
352 
osiris_map_io(void)353 static void __init osiris_map_io(void)
354 {
355 	unsigned long flags;
356 
357 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
358 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
359 	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
360 
361 	/* check for the newer revision boards with large page nand */
362 
363 	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
364 		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
365 		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
366 		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
367 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
368 	} else {
369 		/* write-protect line to the NAND */
370 		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
371 		gpio_free(S3C2410_GPA(0));
372 	}
373 
374 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
375 
376 	local_irq_save(flags);
377 	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
378 	local_irq_restore(flags);
379 }
380 
osiris_init_time(void)381 static void __init osiris_init_time(void)
382 {
383 	s3c2440_init_clocks(12000000);
384 	s3c24xx_timer_init();
385 }
386 
osiris_init(void)387 static void __init osiris_init(void)
388 {
389 	register_syscore_ops(&osiris_pm_syscore_ops);
390 
391 	s3c_i2c0_set_platdata(NULL);
392 	s3c_nand_set_platdata(&osiris_nand_info);
393 
394 	s3c_cpufreq_setboard(&osiris_cpufreq);
395 
396 	i2c_register_board_info(0, osiris_i2c_devs,
397 				ARRAY_SIZE(osiris_i2c_devs));
398 
399 	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
400 };
401 
402 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
403 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
404 	.atag_offset	= 0x100,
405 	.map_io		= osiris_map_io,
406 	.init_irq	= s3c2440_init_irq,
407 	.init_machine	= osiris_init,
408 	.init_time	= osiris_init_time,
409 MACHINE_END
410