1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Lager board
4 *
5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
6 * Copyright (C) 2014 Cogent Embedded, Inc.
7 * Copyright (C) 2015-2016 Renesas Electronics Corporation
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7790.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Lager";
45	compatible = "renesas,lager", "renesas,r8a7790";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scifa1;
50		i2c8 = &gpioi2c1;
51		i2c9 = &gpioi2c2;
52		i2c10 = &i2cexio0;
53		i2c11 = &i2cexio1;
54		i2c12 = &i2chdmi;
55		i2c13 = &i2cpwr;
56	};
57
58	chosen {
59		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
60		stdout-path = "serial0:115200n8";
61	};
62
63	memory@40000000 {
64		device_type = "memory";
65		reg = <0 0x40000000 0 0x40000000>;
66	};
67
68	memory@140000000 {
69		device_type = "memory";
70		reg = <1 0x40000000 0 0xc0000000>;
71	};
72
73	lbsc {
74		#address-cells = <1>;
75		#size-cells = <1>;
76	};
77
78	keyboard {
79		compatible = "gpio-keys";
80
81		one {
82			linux,code = <KEY_1>;
83			label = "SW2-1";
84			wakeup-source;
85			debounce-interval = <20>;
86			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
87		};
88		two {
89			linux,code = <KEY_2>;
90			label = "SW2-2";
91			wakeup-source;
92			debounce-interval = <20>;
93			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
94		};
95		three {
96			linux,code = <KEY_3>;
97			label = "SW2-3";
98			wakeup-source;
99			debounce-interval = <20>;
100			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
101		};
102		four {
103			linux,code = <KEY_4>;
104			label = "SW2-4";
105			wakeup-source;
106			debounce-interval = <20>;
107			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
108		};
109	};
110
111	leds {
112		compatible = "gpio-leds";
113		led6 {
114			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
115		};
116		led7 {
117			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
118		};
119		led8 {
120			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
121		};
122	};
123
124	fixedregulator3v3: regulator-3v3 {
125		compatible = "regulator-fixed";
126		regulator-name = "fixed-3.3V";
127		regulator-min-microvolt = <3300000>;
128		regulator-max-microvolt = <3300000>;
129		regulator-boot-on;
130		regulator-always-on;
131	};
132
133	vcc_sdhi0: regulator-vcc-sdhi0 {
134		compatible = "regulator-fixed";
135
136		regulator-name = "SDHI0 Vcc";
137		regulator-min-microvolt = <3300000>;
138		regulator-max-microvolt = <3300000>;
139
140		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
141		enable-active-high;
142	};
143
144	vccq_sdhi0: regulator-vccq-sdhi0 {
145		compatible = "regulator-gpio";
146
147		regulator-name = "SDHI0 VccQ";
148		regulator-min-microvolt = <1800000>;
149		regulator-max-microvolt = <3300000>;
150
151		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
152		gpios-states = <1>;
153		states = <3300000 1>, <1800000 0>;
154	};
155
156	vcc_sdhi2: regulator-vcc-sdhi2 {
157		compatible = "regulator-fixed";
158
159		regulator-name = "SDHI2 Vcc";
160		regulator-min-microvolt = <3300000>;
161		regulator-max-microvolt = <3300000>;
162
163		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
164		enable-active-high;
165	};
166
167	vccq_sdhi2: regulator-vccq-sdhi2 {
168		compatible = "regulator-gpio";
169
170		regulator-name = "SDHI2 VccQ";
171		regulator-min-microvolt = <1800000>;
172		regulator-max-microvolt = <3300000>;
173
174		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
175		gpios-states = <1>;
176		states = <3300000 1>, <1800000 0>;
177	};
178
179	audio_clock: audio_clock {
180		compatible = "fixed-clock";
181		#clock-cells = <0>;
182		clock-frequency = <11289600>;
183	};
184
185	rsnd_ak4643: sound {
186		compatible = "simple-audio-card";
187
188		simple-audio-card,format = "left_j";
189		simple-audio-card,bitclock-master = <&sndcodec>;
190		simple-audio-card,frame-master = <&sndcodec>;
191
192		sndcpu: simple-audio-card,cpu {
193			sound-dai = <&rcar_sound>;
194		};
195
196		sndcodec: simple-audio-card,codec {
197			sound-dai = <&ak4643>;
198			clocks = <&audio_clock>;
199		};
200	};
201
202	vga-encoder {
203		compatible = "adi,adv7123";
204
205		ports {
206			#address-cells = <1>;
207			#size-cells = <0>;
208
209			port@0 {
210				reg = <0>;
211				adv7123_in: endpoint {
212					remote-endpoint = <&du_out_rgb>;
213				};
214			};
215			port@1 {
216				reg = <1>;
217				adv7123_out: endpoint {
218					remote-endpoint = <&vga_in>;
219				};
220			};
221		};
222	};
223
224	vga {
225		compatible = "vga-connector";
226
227		port {
228			vga_in: endpoint {
229				remote-endpoint = <&adv7123_out>;
230			};
231		};
232	};
233
234	hdmi-in {
235		compatible = "hdmi-connector";
236		type = "a";
237
238		port {
239			hdmi_con_in: endpoint {
240				remote-endpoint = <&adv7612_in>;
241			};
242		};
243	};
244
245	cec_clock: cec-clock {
246		compatible = "fixed-clock";
247		#clock-cells = <0>;
248		clock-frequency = <12000000>;
249	};
250
251	hdmi-out {
252		compatible = "hdmi-connector";
253		type = "a";
254
255		port {
256			hdmi_con_out: endpoint {
257				remote-endpoint = <&adv7511_out>;
258			};
259		};
260	};
261
262	x2_clk: x2-clock {
263		compatible = "fixed-clock";
264		#clock-cells = <0>;
265		clock-frequency = <148500000>;
266	};
267
268	x13_clk: x13-clock {
269		compatible = "fixed-clock";
270		#clock-cells = <0>;
271		clock-frequency = <148500000>;
272	};
273
274	gpioi2c1: i2c-8 {
275		#address-cells = <1>;
276		#size-cells = <0>;
277		compatible = "i2c-gpio";
278		status = "disabled";
279		scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
280		sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
281		i2c-gpio,delay-us = <5>;
282	};
283
284	gpioi2c2: i2c-9 {
285		#address-cells = <1>;
286		#size-cells = <0>;
287		compatible = "i2c-gpio";
288		status = "disabled";
289		scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
290		sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
291		i2c-gpio,delay-us = <5>;
292	};
293
294	/*
295	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
296	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
297	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
298	 * Note: For testing the I2C slave feature, it is convenient to connect this
299	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
300	 * instantiate the slave device at runtime according to the documentation.
301	 * You can then communicate with the slave via IIC3.
302	 *
303	 * IIC0/I2C0 does not appear to support fallback to GPIO.
304	 */
305	i2cexio0: i2c-10 {
306		compatible = "i2c-demux-pinctrl";
307		i2c-parent = <&iic0>, <&i2c0>;
308		i2c-bus-name = "i2c-exio0";
309		#address-cells = <1>;
310		#size-cells = <0>;
311	};
312
313	/*
314	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
315	 * This is similar to the arangement described for i2cexio0 (above)
316	 * with a fallback to GPIO also provided.
317	 */
318	i2cexio1: i2c-11 {
319		compatible = "i2c-demux-pinctrl";
320		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
321		i2c-bus-name = "i2c-exio1";
322		#address-cells = <1>;
323		#size-cells = <0>;
324	};
325
326	/*
327	 * IIC2 and I2C2 may be switched using pinmux.
328	 * A fallback to GPIO is also provided.
329	 */
330	i2chdmi: i2c-12 {
331		compatible = "i2c-demux-pinctrl";
332		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
333		i2c-bus-name = "i2c-hdmi";
334		#address-cells = <1>;
335		#size-cells = <0>;
336
337		ak4643: codec@12 {
338			compatible = "asahi-kasei,ak4643";
339			#sound-dai-cells = <0>;
340			reg = <0x12>;
341		};
342
343		composite-in@20 {
344			compatible = "adi,adv7180";
345			reg = <0x20>;
346
347			port {
348				adv7180: endpoint {
349					bus-width = <8>;
350					remote-endpoint = <&vin1ep0>;
351				};
352			};
353		};
354
355		hdmi@39 {
356			compatible = "adi,adv7511w";
357			reg = <0x39>;
358			interrupt-parent = <&gpio1>;
359			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
360			clocks = <&cec_clock>;
361			clock-names = "cec";
362
363			adi,input-depth = <8>;
364			adi,input-colorspace = "rgb";
365			adi,input-clock = "1x";
366
367			ports {
368				#address-cells = <1>;
369				#size-cells = <0>;
370
371				port@0 {
372					reg = <0>;
373					adv7511_in: endpoint {
374						remote-endpoint = <&lvds0_out>;
375					};
376				};
377
378				port@1 {
379					reg = <1>;
380					adv7511_out: endpoint {
381						remote-endpoint = <&hdmi_con_out>;
382					};
383				};
384			};
385		};
386
387		hdmi-in@4c {
388			compatible = "adi,adv7612";
389			reg = <0x4c>;
390			interrupt-parent = <&gpio1>;
391			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
392			default-input = <0>;
393
394			ports {
395				#address-cells = <1>;
396				#size-cells = <0>;
397
398				port@0 {
399					reg = <0>;
400					adv7612_in: endpoint {
401						remote-endpoint = <&hdmi_con_in>;
402					};
403				};
404
405				port@2 {
406					reg = <2>;
407					adv7612_out: endpoint {
408						remote-endpoint = <&vin0ep2>;
409					};
410				};
411			};
412		};
413	};
414
415	/*
416	 * IIC3 and I2C3 may be switched using pinmux.
417	 * IIC3/I2C3 does not appear to support fallback to GPIO.
418	 */
419	i2cpwr: i2c-13 {
420		compatible = "i2c-demux-pinctrl";
421		pinctrl-names = "default";
422		pinctrl-0 = <&pmic_irq_pins>;
423		i2c-parent = <&iic3>, <&i2c3>;
424		i2c-bus-name = "i2c-pwr";
425		#address-cells = <1>;
426		#size-cells = <0>;
427
428		pmic@58 {
429			compatible = "dlg,da9063";
430			reg = <0x58>;
431			interrupt-parent = <&irqc0>;
432			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
433			interrupt-controller;
434
435			rtc {
436				compatible = "dlg,da9063-rtc";
437			};
438
439			wdt {
440				compatible = "dlg,da9063-watchdog";
441			};
442		};
443
444		vdd_dvfs: regulator@68 {
445			compatible = "dlg,da9210";
446			reg = <0x68>;
447			interrupt-parent = <&irqc0>;
448			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
449
450			regulator-min-microvolt = <1000000>;
451			regulator-max-microvolt = <1000000>;
452			regulator-boot-on;
453			regulator-always-on;
454		};
455	};
456};
457
458&du {
459	pinctrl-0 = <&du_pins>;
460	pinctrl-names = "default";
461	status = "okay";
462
463	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
464		 <&x13_clk>, <&x2_clk>;
465	clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
466
467	ports {
468		port@0 {
469			endpoint {
470				remote-endpoint = <&adv7123_in>;
471			};
472		};
473	};
474};
475
476&lvds0 {
477	status = "okay";
478
479	ports {
480		port@1 {
481			endpoint {
482				remote-endpoint = <&adv7511_in>;
483			};
484		};
485	};
486};
487
488&lvds1 {
489	ports {
490		port@1 {
491			lvds_connector: endpoint {
492			};
493		};
494	};
495};
496
497&extal_clk {
498	clock-frequency = <20000000>;
499};
500
501&pfc {
502	pinctrl-0 = <&scif_clk_pins>;
503	pinctrl-names = "default";
504
505	du_pins: du {
506		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
507		function = "du";
508	};
509
510	scif0_pins: scif0 {
511		groups = "scif0_data";
512		function = "scif0";
513	};
514
515	scif_clk_pins: scif_clk {
516		groups = "scif_clk";
517		function = "scif_clk";
518	};
519
520	ether_pins: ether {
521		groups = "eth_link", "eth_mdio", "eth_rmii";
522		function = "eth";
523	};
524
525	phy1_pins: phy1 {
526		groups = "intc_irq0";
527		function = "intc";
528	};
529
530	scifa1_pins: scifa1 {
531		groups = "scifa1_data";
532		function = "scifa1";
533	};
534
535	sdhi0_pins: sd0 {
536		groups = "sdhi0_data4", "sdhi0_ctrl";
537		function = "sdhi0";
538		power-source = <3300>;
539	};
540
541	sdhi0_pins_uhs: sd0_uhs {
542		groups = "sdhi0_data4", "sdhi0_ctrl";
543		function = "sdhi0";
544		power-source = <1800>;
545	};
546
547	sdhi2_pins: sd2 {
548		groups = "sdhi2_data4", "sdhi2_ctrl";
549		function = "sdhi2";
550		power-source = <3300>;
551	};
552
553	sdhi2_pins_uhs: sd2_uhs {
554		groups = "sdhi2_data4", "sdhi2_ctrl";
555		function = "sdhi2";
556		power-source = <1800>;
557	};
558
559	mmc1_pins: mmc1 {
560		groups = "mmc1_data8", "mmc1_ctrl";
561		function = "mmc1";
562	};
563
564	qspi_pins: qspi {
565		groups = "qspi_ctrl", "qspi_data4";
566		function = "qspi";
567	};
568
569	msiof1_pins: msiof1 {
570		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
571				 "msiof1_tx";
572		function = "msiof1";
573	};
574
575	i2c0_pins: i2c0 {
576		groups = "i2c0";
577		function = "i2c0";
578	};
579
580	iic0_pins: iic0 {
581		groups = "iic0";
582		function = "iic0";
583	};
584
585	i2c1_pins: i2c1 {
586		groups = "i2c1";
587		function = "i2c1";
588	};
589
590	iic1_pins: iic1 {
591		groups = "iic1";
592		function = "iic1";
593	};
594
595	i2c2_pins: i2c2 {
596		groups = "i2c2";
597		function = "i2c2";
598	};
599
600	iic2_pins: iic2 {
601		groups = "iic2";
602		function = "iic2";
603	};
604
605	i2c3_pins: i2c3 {
606		groups = "i2c3";
607		function = "i2c3";
608	};
609
610	iic3_pins: iic3 {
611		groups = "iic3";
612		function = "iic3";
613	};
614
615	pmic_irq_pins: pmicirq {
616		groups = "intc_irq2";
617		function = "intc";
618	};
619
620	hsusb_pins: hsusb {
621		groups = "usb0_ovc_vbus";
622		function = "usb0";
623	};
624
625	usb0_pins: usb0 {
626		groups = "usb0";
627		function = "usb0";
628	};
629
630	usb1_pins: usb1 {
631		groups = "usb1";
632		function = "usb1";
633	};
634
635	usb2_pins: usb2 {
636		groups = "usb2";
637		function = "usb2";
638	};
639
640	vin0_pins: vin0 {
641		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
642		function = "vin0";
643	};
644
645	vin1_pins: vin1 {
646		groups = "vin1_data8", "vin1_clk";
647		function = "vin1";
648	};
649
650	sound_pins: sound {
651		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
652		function = "ssi";
653	};
654
655	sound_clk_pins: sound_clk {
656		groups = "audio_clk_a";
657		function = "audio_clk";
658	};
659};
660
661&ether {
662	pinctrl-0 = <&ether_pins &phy1_pins>;
663	pinctrl-names = "default";
664
665	phy-handle = <&phy1>;
666	renesas,ether-link-active-low;
667	status = "okay";
668
669	phy1: ethernet-phy@1 {
670		reg = <1>;
671		interrupt-parent = <&irqc0>;
672		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
673		micrel,led-mode = <1>;
674		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
675	};
676};
677
678&cmt0 {
679	status = "okay";
680};
681
682&mmcif1 {
683	pinctrl-0 = <&mmc1_pins>;
684	pinctrl-names = "default";
685
686	vmmc-supply = <&fixedregulator3v3>;
687	bus-width = <8>;
688	non-removable;
689	status = "okay";
690};
691
692&sata1 {
693	status = "okay";
694};
695
696&qspi {
697	pinctrl-0 = <&qspi_pins>;
698	pinctrl-names = "default";
699
700	status = "okay";
701
702	flash: flash@0 {
703		compatible = "spansion,s25fl512s", "jedec,spi-nor";
704		reg = <0>;
705		spi-max-frequency = <30000000>;
706		spi-tx-bus-width = <4>;
707		spi-rx-bus-width = <4>;
708		spi-cpha;
709		spi-cpol;
710		m25p,fast-read;
711
712		partitions {
713			compatible = "fixed-partitions";
714			#address-cells = <1>;
715			#size-cells = <1>;
716
717			partition@0 {
718				label = "loader";
719				reg = <0x00000000 0x00040000>;
720				read-only;
721			};
722			partition@40000 {
723				label = "user";
724				reg = <0x00040000 0x00400000>;
725				read-only;
726			};
727			partition@440000 {
728				label = "flash";
729				reg = <0x00440000 0x03bc0000>;
730			};
731		};
732	};
733};
734
735&scif0 {
736	pinctrl-0 = <&scif0_pins>;
737	pinctrl-names = "default";
738
739	status = "okay";
740};
741
742&scifa1 {
743	pinctrl-0 = <&scifa1_pins>;
744	pinctrl-names = "default";
745
746	status = "okay";
747};
748
749&scif_clk {
750	clock-frequency = <14745600>;
751};
752
753&msiof1 {
754	pinctrl-0 = <&msiof1_pins>;
755	pinctrl-names = "default";
756
757	status = "okay";
758
759	pmic: pmic@0 {
760		compatible = "renesas,r2a11302ft";
761		reg = <0>;
762		spi-max-frequency = <6000000>;
763		spi-cpol;
764		spi-cpha;
765	};
766};
767
768&sdhi0 {
769	pinctrl-0 = <&sdhi0_pins>;
770	pinctrl-1 = <&sdhi0_pins_uhs>;
771	pinctrl-names = "default", "state_uhs";
772
773	vmmc-supply = <&vcc_sdhi0>;
774	vqmmc-supply = <&vccq_sdhi0>;
775	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
776	sd-uhs-sdr50;
777	sd-uhs-sdr104;
778	status = "okay";
779};
780
781&sdhi2 {
782	pinctrl-0 = <&sdhi2_pins>;
783	pinctrl-1 = <&sdhi2_pins_uhs>;
784	pinctrl-names = "default", "state_uhs";
785
786	vmmc-supply = <&vcc_sdhi2>;
787	vqmmc-supply = <&vccq_sdhi2>;
788	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
789	sd-uhs-sdr50;
790	status = "okay";
791};
792
793&cpu0 {
794	cpu0-supply = <&vdd_dvfs>;
795};
796
797&i2c0	{
798	pinctrl-0 = <&i2c0_pins>;
799	pinctrl-names = "i2c-exio0";
800};
801
802&iic0	{
803	pinctrl-0 = <&iic0_pins>;
804	pinctrl-names = "i2c-exio0";
805};
806
807&i2c1	{
808	pinctrl-0 = <&i2c1_pins>;
809	pinctrl-names = "i2c-exio1";
810};
811
812&iic1	{
813	pinctrl-0 = <&iic1_pins>;
814	pinctrl-names = "i2c-exio1";
815};
816
817&i2c2	{
818	pinctrl-0 = <&i2c2_pins>;
819	pinctrl-names = "i2c-hdmi";
820
821	clock-frequency = <100000>;
822};
823
824&iic2	{
825	pinctrl-0 = <&iic2_pins>;
826	pinctrl-names = "i2c-hdmi";
827
828	clock-frequency = <100000>;
829};
830
831&i2c3	{
832	pinctrl-0 = <&i2c3_pins>;
833	pinctrl-names = "i2c-pwr";
834};
835
836&iic3	{
837	pinctrl-0 = <&iic3_pins>;
838	pinctrl-names = "i2c-pwr";
839};
840
841&pci0 {
842	status = "okay";
843	pinctrl-0 = <&usb0_pins>;
844	pinctrl-names = "default";
845};
846
847&pci1 {
848	status = "okay";
849	pinctrl-0 = <&usb1_pins>;
850	pinctrl-names = "default";
851};
852
853&xhci {
854	status = "okay";
855	pinctrl-0 = <&usb2_pins>;
856	pinctrl-names = "default";
857};
858
859&pci2 {
860	status = "okay";
861	pinctrl-0 = <&usb2_pins>;
862	pinctrl-names = "default";
863};
864
865&hsusb {
866	status = "okay";
867	pinctrl-0 = <&hsusb_pins>;
868	pinctrl-names = "default";
869	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
870};
871
872&usbphy {
873	status = "okay";
874};
875
876/* HDMI video input */
877&vin0 {
878	pinctrl-0 = <&vin0_pins>;
879	pinctrl-names = "default";
880
881	status = "okay";
882
883	port {
884		vin0ep2: endpoint {
885			remote-endpoint = <&adv7612_out>;
886			bus-width = <24>;
887			hsync-active = <0>;
888			vsync-active = <0>;
889			pclk-sample = <1>;
890			data-active = <1>;
891		};
892	};
893};
894
895/* composite video input */
896&vin1 {
897	pinctrl-0 = <&vin1_pins>;
898	pinctrl-names = "default";
899
900	status = "okay";
901
902	port {
903		vin1ep0: endpoint {
904			remote-endpoint = <&adv7180>;
905			bus-width = <8>;
906		};
907	};
908};
909
910&rcar_sound {
911	pinctrl-0 = <&sound_pins &sound_clk_pins>;
912	pinctrl-names = "default";
913
914	/* Single DAI */
915	#sound-dai-cells = <0>;
916
917	status = "okay";
918
919	rcar_sound,dai {
920		dai0 {
921			playback = <&ssi0 &src2 &dvc0>;
922			capture  = <&ssi1 &src3 &dvc1>;
923		};
924	};
925};
926
927&rwdt {
928	timeout-sec = <60>;
929	status = "okay";
930};
931
932&ssi1 {
933	shared-pin;
934};
935