1 /******************************************************************************
2 *
3 * Copyright(c) 2009-2010 Realtek Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * wlanfae <wlanfae@realtek.com>
23 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
24 * Hsinchu 300, Taiwan.
25 *
26 * Larry Finger <Larry.Finger@lwfinger.net>
27 *
28 *****************************************************************************/
29
30 #include "../wifi.h"
31 #include "../efuse.h"
32 #include "../base.h"
33 #include "../regd.h"
34 #include "../cam.h"
35 #include "../ps.h"
36 #include "../pci.h"
37 #include "reg.h"
38 #include "def.h"
39 #include "phy.h"
40 #include "dm.h"
41 #include "fw.h"
42 #include "led.h"
43 #include "sw.h"
44 #include "hw.h"
45
rtl92de_read_dword_dbi(struct ieee80211_hw * hw,u16 offset,u8 direct)46 u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct)
47 {
48 struct rtl_priv *rtlpriv = rtl_priv(hw);
49 u32 value;
50
51 rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC));
52 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct);
53 udelay(10);
54 value = rtl_read_dword(rtlpriv, REG_DBI_RDATA);
55 return value;
56 }
57
rtl92de_write_dword_dbi(struct ieee80211_hw * hw,u16 offset,u32 value,u8 direct)58 void rtl92de_write_dword_dbi(struct ieee80211_hw *hw,
59 u16 offset, u32 value, u8 direct)
60 {
61 struct rtl_priv *rtlpriv = rtl_priv(hw);
62
63 rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000));
64 rtl_write_dword(rtlpriv, REG_DBI_WDATA, value);
65 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct);
66 }
67
_rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw * hw,u8 set_bits,u8 clear_bits)68 static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
69 u8 set_bits, u8 clear_bits)
70 {
71 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
72 struct rtl_priv *rtlpriv = rtl_priv(hw);
73
74 rtlpci->reg_bcn_ctrl_val |= set_bits;
75 rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
76 rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
77 }
78
_rtl92de_stop_tx_beacon(struct ieee80211_hw * hw)79 static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw)
80 {
81 struct rtl_priv *rtlpriv = rtl_priv(hw);
82 u8 tmp1byte;
83
84 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
85 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
86 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff);
87 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
88 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
89 tmp1byte &= ~(BIT(0));
90 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
91 }
92
_rtl92de_resume_tx_beacon(struct ieee80211_hw * hw)93 static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw)
94 {
95 struct rtl_priv *rtlpriv = rtl_priv(hw);
96 u8 tmp1byte;
97
98 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
99 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
100 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
101 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
102 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
103 tmp1byte |= BIT(0);
104 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
105 }
106
_rtl92de_enable_bcn_sub_func(struct ieee80211_hw * hw)107 static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw)
108 {
109 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1));
110 }
111
_rtl92de_disable_bcn_sub_func(struct ieee80211_hw * hw)112 static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw)
113 {
114 _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0);
115 }
116
rtl92de_get_hw_reg(struct ieee80211_hw * hw,u8 variable,u8 * val)117 void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
118 {
119 struct rtl_priv *rtlpriv = rtl_priv(hw);
120 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
121 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
122
123 switch (variable) {
124 case HW_VAR_RCR:
125 *((u32 *) (val)) = rtlpci->receive_config;
126 break;
127 case HW_VAR_RF_STATE:
128 *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
129 break;
130 case HW_VAR_FWLPS_RF_ON:{
131 enum rf_pwrstate rfState;
132 u32 val_rcr;
133
134 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
135 (u8 *) (&rfState));
136 if (rfState == ERFOFF) {
137 *((bool *) (val)) = true;
138 } else {
139 val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
140 val_rcr &= 0x00070000;
141 if (val_rcr)
142 *((bool *) (val)) = false;
143 else
144 *((bool *) (val)) = true;
145 }
146 break;
147 }
148 case HW_VAR_FW_PSMODE_STATUS:
149 *((bool *) (val)) = ppsc->fw_current_inpsmode;
150 break;
151 case HW_VAR_CORRECT_TSF:{
152 u64 tsf;
153 u32 *ptsf_low = (u32 *)&tsf;
154 u32 *ptsf_high = ((u32 *)&tsf) + 1;
155
156 *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
157 *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
158 *((u64 *) (val)) = tsf;
159 break;
160 }
161 case HW_VAR_INT_MIGRATION:
162 *((bool *)(val)) = rtlpriv->dm.interrupt_migration;
163 break;
164 case HW_VAR_INT_AC:
165 *((bool *)(val)) = rtlpriv->dm.disable_tx_int;
166 break;
167 default:
168 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
169 ("switch case not process\n"));
170 break;
171 }
172 }
173
rtl92de_set_hw_reg(struct ieee80211_hw * hw,u8 variable,u8 * val)174 void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
175 {
176 struct rtl_priv *rtlpriv = rtl_priv(hw);
177 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
178 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
179 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
180 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
181 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
182 u8 idx;
183
184 switch (variable) {
185 case HW_VAR_ETHER_ADDR:
186 for (idx = 0; idx < ETH_ALEN; idx++) {
187 rtl_write_byte(rtlpriv, (REG_MACID + idx),
188 val[idx]);
189 }
190 break;
191 case HW_VAR_BASIC_RATE: {
192 u16 rate_cfg = ((u16 *) val)[0];
193 u8 rate_index = 0;
194
195 rate_cfg = rate_cfg & 0x15f;
196 if (mac->vendor == PEER_CISCO &&
197 ((rate_cfg & 0x150) == 0))
198 rate_cfg |= 0x01;
199 rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
200 rtl_write_byte(rtlpriv, REG_RRSR + 1,
201 (rate_cfg >> 8) & 0xff);
202 while (rate_cfg > 0x1) {
203 rate_cfg = (rate_cfg >> 1);
204 rate_index++;
205 }
206 if (rtlhal->fw_version > 0xe)
207 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
208 rate_index);
209 break;
210 }
211 case HW_VAR_BSSID:
212 for (idx = 0; idx < ETH_ALEN; idx++) {
213 rtl_write_byte(rtlpriv, (REG_BSSID + idx),
214 val[idx]);
215 }
216 break;
217 case HW_VAR_SIFS:
218 rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
219 rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
220 rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
221 rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
222 if (!mac->ht_enable)
223 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
224 0x0e0e);
225 else
226 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
227 *((u16 *) val));
228 break;
229 case HW_VAR_SLOT_TIME: {
230 u8 e_aci;
231
232 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
233 ("HW_VAR_SLOT_TIME %x\n", val[0]));
234 rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
235 for (e_aci = 0; e_aci < AC_MAX; e_aci++)
236 rtlpriv->cfg->ops->set_hw_reg(hw,
237 HW_VAR_AC_PARAM,
238 (u8 *) (&e_aci));
239 break;
240 }
241 case HW_VAR_ACK_PREAMBLE: {
242 u8 reg_tmp;
243 u8 short_preamble = (bool) (*(u8 *) val);
244
245 reg_tmp = (mac->cur_40_prime_sc) << 5;
246 if (short_preamble)
247 reg_tmp |= 0x80;
248 rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
249 break;
250 }
251 case HW_VAR_AMPDU_MIN_SPACE: {
252 u8 min_spacing_to_set;
253 u8 sec_min_space;
254
255 min_spacing_to_set = *((u8 *) val);
256 if (min_spacing_to_set <= 7) {
257 sec_min_space = 0;
258 if (min_spacing_to_set < sec_min_space)
259 min_spacing_to_set = sec_min_space;
260 mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) |
261 min_spacing_to_set);
262 *val = min_spacing_to_set;
263 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
264 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
265 mac->min_space_cfg));
266 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
267 mac->min_space_cfg);
268 }
269 break;
270 }
271 case HW_VAR_SHORTGI_DENSITY: {
272 u8 density_to_set;
273
274 density_to_set = *((u8 *) val);
275 mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
276 mac->min_space_cfg |= (density_to_set << 3);
277 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
278 ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
279 mac->min_space_cfg));
280 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
281 mac->min_space_cfg);
282 break;
283 }
284 case HW_VAR_AMPDU_FACTOR: {
285 u8 factor_toset;
286 u32 regtoSet;
287 u8 *ptmp_byte = NULL;
288 u8 index;
289
290 if (rtlhal->macphymode == DUALMAC_DUALPHY)
291 regtoSet = 0xb9726641;
292 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
293 regtoSet = 0x66626641;
294 else
295 regtoSet = 0xb972a841;
296 factor_toset = *((u8 *) val);
297 if (factor_toset <= 3) {
298 factor_toset = (1 << (factor_toset + 2));
299 if (factor_toset > 0xf)
300 factor_toset = 0xf;
301 for (index = 0; index < 4; index++) {
302 ptmp_byte = (u8 *) (®toSet) + index;
303 if ((*ptmp_byte & 0xf0) >
304 (factor_toset << 4))
305 *ptmp_byte = (*ptmp_byte & 0x0f)
306 | (factor_toset << 4);
307 if ((*ptmp_byte & 0x0f) > factor_toset)
308 *ptmp_byte = (*ptmp_byte & 0xf0)
309 | (factor_toset);
310 }
311 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoSet);
312 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
313 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
314 factor_toset));
315 }
316 break;
317 }
318 case HW_VAR_AC_PARAM: {
319 u8 e_aci = *((u8 *) val);
320 rtl92d_dm_init_edca_turbo(hw);
321 if (rtlpci->acm_method != eAcmWay2_SW)
322 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
323 (u8 *) (&e_aci));
324 break;
325 }
326 case HW_VAR_ACM_CTRL: {
327 u8 e_aci = *((u8 *) val);
328 union aci_aifsn *p_aci_aifsn =
329 (union aci_aifsn *)(&(mac->ac[0].aifs));
330 u8 acm = p_aci_aifsn->f.acm;
331 u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
332
333 acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1);
334 if (acm) {
335 switch (e_aci) {
336 case AC0_BE:
337 acm_ctrl |= ACMHW_BEQEN;
338 break;
339 case AC2_VI:
340 acm_ctrl |= ACMHW_VIQEN;
341 break;
342 case AC3_VO:
343 acm_ctrl |= ACMHW_VOQEN;
344 break;
345 default:
346 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
347 ("HW_VAR_ACM_CTRL acm set "
348 "failed: eACI is %d\n", acm));
349 break;
350 }
351 } else {
352 switch (e_aci) {
353 case AC0_BE:
354 acm_ctrl &= (~ACMHW_BEQEN);
355 break;
356 case AC2_VI:
357 acm_ctrl &= (~ACMHW_VIQEN);
358 break;
359 case AC3_VO:
360 acm_ctrl &= (~ACMHW_VOQEN);
361 break;
362 default:
363 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
364 ("switch case not process\n"));
365 break;
366 }
367 }
368 RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
369 ("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
370 "Write 0x%X\n", acm_ctrl));
371 rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
372 break;
373 }
374 case HW_VAR_RCR:
375 rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
376 rtlpci->receive_config = ((u32 *) (val))[0];
377 break;
378 case HW_VAR_RETRY_LIMIT: {
379 u8 retry_limit = ((u8 *) (val))[0];
380
381 rtl_write_word(rtlpriv, REG_RL,
382 retry_limit << RETRY_LIMIT_SHORT_SHIFT |
383 retry_limit << RETRY_LIMIT_LONG_SHIFT);
384 break;
385 }
386 case HW_VAR_DUAL_TSF_RST:
387 rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
388 break;
389 case HW_VAR_EFUSE_BYTES:
390 rtlefuse->efuse_usedbytes = *((u16 *) val);
391 break;
392 case HW_VAR_EFUSE_USAGE:
393 rtlefuse->efuse_usedpercentage = *((u8 *) val);
394 break;
395 case HW_VAR_IO_CMD:
396 rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val));
397 break;
398 case HW_VAR_WPA_CONFIG:
399 rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
400 break;
401 case HW_VAR_SET_RPWM:
402 rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (u8 *) (val));
403 break;
404 case HW_VAR_H2C_FW_PWRMODE:
405 break;
406 case HW_VAR_FW_PSMODE_STATUS:
407 ppsc->fw_current_inpsmode = *((bool *) val);
408 break;
409 case HW_VAR_H2C_FW_JOINBSSRPT: {
410 u8 mstatus = (*(u8 *) val);
411 u8 tmp_regcr, tmp_reg422;
412 bool recover = false;
413
414 if (mstatus == RT_MEDIA_CONNECT) {
415 rtlpriv->cfg->ops->set_hw_reg(hw,
416 HW_VAR_AID, NULL);
417 tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
418 rtl_write_byte(rtlpriv, REG_CR + 1,
419 (tmp_regcr | BIT(0)));
420 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
421 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
422 tmp_reg422 = rtl_read_byte(rtlpriv,
423 REG_FWHW_TXQ_CTRL + 2);
424 if (tmp_reg422 & BIT(6))
425 recover = true;
426 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
427 tmp_reg422 & (~BIT(6)));
428 rtl92d_set_fw_rsvdpagepkt(hw, 0);
429 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
430 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
431 if (recover)
432 rtl_write_byte(rtlpriv,
433 REG_FWHW_TXQ_CTRL + 2,
434 tmp_reg422);
435 rtl_write_byte(rtlpriv, REG_CR + 1,
436 (tmp_regcr & ~(BIT(0))));
437 }
438 rtl92d_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
439 break;
440 }
441 case HW_VAR_AID: {
442 u16 u2btmp;
443 u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
444 u2btmp &= 0xC000;
445 rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp |
446 mac->assoc_id));
447 break;
448 }
449 case HW_VAR_CORRECT_TSF: {
450 u8 btype_ibss = ((u8 *) (val))[0];
451
452 if (btype_ibss)
453 _rtl92de_stop_tx_beacon(hw);
454 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
455 rtl_write_dword(rtlpriv, REG_TSFTR,
456 (u32) (mac->tsf & 0xffffffff));
457 rtl_write_dword(rtlpriv, REG_TSFTR + 4,
458 (u32) ((mac->tsf >> 32) & 0xffffffff));
459 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
460 if (btype_ibss)
461 _rtl92de_resume_tx_beacon(hw);
462
463 break;
464 }
465 case HW_VAR_INT_MIGRATION: {
466 bool int_migration = *(bool *) (val);
467
468 if (int_migration) {
469 /* Set interrupt migration timer and
470 * corresponding Tx/Rx counter.
471 * timer 25ns*0xfa0=100us for 0xf packets.
472 * 0x306:Rx, 0x307:Tx */
473 rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
474 rtlpriv->dm.interrupt_migration = int_migration;
475 } else {
476 /* Reset all interrupt migration settings. */
477 rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
478 rtlpriv->dm.interrupt_migration = int_migration;
479 }
480 break;
481 }
482 case HW_VAR_INT_AC: {
483 bool disable_ac_int = *((bool *) val);
484
485 /* Disable four ACs interrupts. */
486 if (disable_ac_int) {
487 /* Disable VO, VI, BE and BK four AC interrupts
488 * to gain more efficient CPU utilization.
489 * When extremely highly Rx OK occurs,
490 * we will disable Tx interrupts.
491 */
492 rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
493 RT_AC_INT_MASKS);
494 rtlpriv->dm.disable_tx_int = disable_ac_int;
495 /* Enable four ACs interrupts. */
496 } else {
497 rtlpriv->cfg->ops->update_interrupt_mask(hw,
498 RT_AC_INT_MASKS, 0);
499 rtlpriv->dm.disable_tx_int = disable_ac_int;
500 }
501 break;
502 }
503 default:
504 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
505 ("switch case not process\n"));
506 break;
507 }
508 }
509
_rtl92de_llt_write(struct ieee80211_hw * hw,u32 address,u32 data)510 static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
511 {
512 struct rtl_priv *rtlpriv = rtl_priv(hw);
513 bool status = true;
514 long count = 0;
515 u32 value = _LLT_INIT_ADDR(address) |
516 _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
517
518 rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
519 do {
520 value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
521 if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
522 break;
523 if (count > POLLING_LLT_THRESHOLD) {
524 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
525 ("Failed to polling write LLT done at "
526 "address %d!\n", address));
527 status = false;
528 break;
529 }
530 } while (++count);
531 return status;
532 }
533
_rtl92de_llt_table_init(struct ieee80211_hw * hw)534 static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw)
535 {
536 struct rtl_priv *rtlpriv = rtl_priv(hw);
537 unsigned short i;
538 u8 txpktbuf_bndy;
539 u8 maxPage;
540 bool status;
541 u32 value32; /* High+low page number */
542 u8 value8; /* normal page number */
543
544 if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) {
545 maxPage = 255;
546 txpktbuf_bndy = 246;
547 value8 = 0;
548 value32 = 0x80bf0d29;
549 } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
550 maxPage = 127;
551 txpktbuf_bndy = 123;
552 value8 = 0;
553 value32 = 0x80750005;
554 }
555
556 /* Set reserved page for each queue */
557 /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */
558 /* load RQPN */
559 rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
560 rtl_write_dword(rtlpriv, REG_RQPN, value32);
561
562 /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */
563 /* TXRKTBUG_PG_BNDY */
564 rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
565 (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 |
566 txpktbuf_bndy));
567
568 /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */
569 /* Beacon Head for TXDMA */
570 rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
571
572 /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */
573 /* BCNQ_PGBNDY */
574 rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
575 rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
576
577 /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */
578 /* WMAC_LBK_BF_HD */
579 rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
580
581 /* Set Tx/Rx page size (Tx must be 128 Bytes, */
582 /* Rx can be 64,128,256,512,1024 bytes) */
583 /* 16. PBP [7:0] = 0x11 */
584 /* TRX page size */
585 rtl_write_byte(rtlpriv, REG_PBP, 0x11);
586
587 /* 17. DRV_INFO_SZ = 0x04 */
588 rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
589
590 /* 18. LLT_table_init(Adapter); */
591 for (i = 0; i < (txpktbuf_bndy - 1); i++) {
592 status = _rtl92de_llt_write(hw, i, i + 1);
593 if (true != status)
594 return status;
595 }
596
597 /* end of list */
598 status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
599 if (true != status)
600 return status;
601
602 /* Make the other pages as ring buffer */
603 /* This ring buffer is used as beacon buffer if we */
604 /* config this MAC as two MAC transfer. */
605 /* Otherwise used as local loopback buffer. */
606 for (i = txpktbuf_bndy; i < maxPage; i++) {
607 status = _rtl92de_llt_write(hw, i, (i + 1));
608 if (true != status)
609 return status;
610 }
611
612 /* Let last entry point to the start entry of ring buffer */
613 status = _rtl92de_llt_write(hw, maxPage, txpktbuf_bndy);
614 if (true != status)
615 return status;
616
617 return true;
618 }
619
_rtl92de_gen_refresh_led_state(struct ieee80211_hw * hw)620 static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw)
621 {
622 struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
623 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
624 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
625 struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
626
627 if (rtlpci->up_first_time)
628 return;
629 if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
630 rtl92de_sw_led_on(hw, pLed0);
631 else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
632 rtl92de_sw_led_on(hw, pLed0);
633 else
634 rtl92de_sw_led_off(hw, pLed0);
635 }
636
_rtl92de_init_mac(struct ieee80211_hw * hw)637 static bool _rtl92de_init_mac(struct ieee80211_hw *hw)
638 {
639 struct rtl_priv *rtlpriv = rtl_priv(hw);
640 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
641 unsigned char bytetmp;
642 unsigned short wordtmp;
643 u16 retry;
644
645 rtl92d_phy_set_poweron(hw);
646 /* Add for resume sequence of power domain according
647 * to power document V11. Chapter V.11.... */
648 /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */
649 /* unlock ISO/CLK/Power control register */
650 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
651 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05);
652
653 /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */
654 /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */
655 /* 3. delay (1ms) this is not necessary when initially power on */
656
657 /* C. Resume Sequence */
658 /* a. SPS0_CTRL 0x11[7:0] = 0x2b */
659 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
660
661 /* b. AFE_XTAL_CTRL [7:0] = 0x0F */
662 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
663
664 /* c. DRV runs power on init flow */
665
666 /* auto enable WLAN */
667 /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */
668 /* Power On Reset for MAC Block */
669 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
670 udelay(2);
671 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
672 udelay(2);
673
674 /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */
675 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
676 udelay(50);
677 retry = 0;
678 while ((bytetmp & BIT(0)) && retry < 1000) {
679 retry++;
680 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
681 udelay(50);
682 }
683
684 /* Enable Radio off, GPIO, and LED function */
685 /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */
686 rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012);
687
688 /* release RF digital isolation */
689 /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */
690 /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */
691 rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
692 udelay(2);
693
694 /* make sure that BB reset OK. */
695 /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */
696
697 /* Disable REG_CR before enable it to assure reset */
698 rtl_write_word(rtlpriv, REG_CR, 0x0);
699
700 /* Release MAC IO register reset */
701 rtl_write_word(rtlpriv, REG_CR, 0x2ff);
702
703 /* clear stopping tx/rx dma */
704 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0);
705
706 /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */
707
708 /* System init */
709 /* 18. LLT_table_init(Adapter); */
710 if (_rtl92de_llt_table_init(hw) == false)
711 return false;
712
713 /* Clear interrupt and enable interrupt */
714 /* 19. HISR 0x124[31:0] = 0xffffffff; */
715 /* HISRE 0x12C[7:0] = 0xFF */
716 rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
717 rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
718
719 /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */
720 /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */
721 /* The IMR should be enabled later after all init sequence
722 * is finished. */
723
724 /* 22. PCIE configuration space configuration */
725 /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */
726 /* and PCIe gated clock function is enabled. */
727 /* PCIE configuration space will be written after
728 * all init sequence.(Or by BIOS) */
729
730 rtl92d_phy_config_maccoexist_rfpage(hw);
731
732 /* THe below section is not related to power document Vxx . */
733 /* This is only useful for driver and OS setting. */
734 /* -------------------Software Relative Setting---------------------- */
735 wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
736 wordtmp &= 0xf;
737 wordtmp |= 0xF771;
738 rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
739
740 /* Reported Tx status from HW for rate adaptive. */
741 /* This should be realtive to power on step 14. But in document V11 */
742 /* still not contain the description.!!! */
743 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
744
745 /* Set Tx/Rx page size (Tx must be 128 Bytes,
746 * Rx can be 64,128,256,512,1024 bytes) */
747 /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */
748
749 /* Set RCR register */
750 rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
751 /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */
752
753 /* Set TCR register */
754 rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
755
756 /* disable earlymode */
757 rtl_write_byte(rtlpriv, 0x4d0, 0x0);
758
759 /* Set TX/RX descriptor physical address(from OS API). */
760 rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
761 rtlpci->tx_ring[BEACON_QUEUE].dma);
762 rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma);
763 rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma);
764 rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma);
765 rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma);
766 rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma);
767 rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma);
768 /* Set RX Desc Address */
769 rtl_write_dword(rtlpriv, REG_RX_DESA,
770 rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
771
772 /* if we want to support 64 bit DMA, we should set it here,
773 * but now we do not support 64 bit DMA*/
774
775 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33);
776
777 /* Reset interrupt migration setting when initialization */
778 rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
779
780 /* Reconsider when to do this operation after asking HWSD. */
781 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
782 rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
783 do {
784 retry++;
785 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
786 } while ((retry < 200) && !(bytetmp & BIT(7)));
787
788 /* After MACIO reset,we must refresh LED state. */
789 _rtl92de_gen_refresh_led_state(hw);
790
791 /* Reset H2C protection register */
792 rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
793
794 return true;
795 }
796
_rtl92de_hw_configure(struct ieee80211_hw * hw)797 static void _rtl92de_hw_configure(struct ieee80211_hw *hw)
798 {
799 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
800 struct rtl_priv *rtlpriv = rtl_priv(hw);
801 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
802 u8 reg_bw_opmode = BW_OPMODE_20MHZ;
803 u32 reg_rrsr;
804
805 reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
806 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
807 rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
808 rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr);
809 rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
810 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0);
811 rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80);
812 rtl_write_word(rtlpriv, REG_RL, 0x0707);
813 rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802);
814 rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
815 rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000);
816 rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504);
817 rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
818 rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
819 /* Aggregation threshold */
820 if (rtlhal->macphymode == DUALMAC_DUALPHY)
821 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641);
822 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
823 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641);
824 else
825 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
826 rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
827 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
828 rtlpci->reg_bcn_ctrl_val = 0x1f;
829 rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val);
830 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
831 rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
832 rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
833 rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
834 /* For throughput */
835 rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666);
836 /* ACKTO for IOT issue. */
837 rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
838 /* Set Spec SIFS (used in NAV) */
839 rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010);
840 rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010);
841 /* Set SIFS for CCK */
842 rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010);
843 /* Set SIFS for OFDM */
844 rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010);
845 /* Set Multicast Address. */
846 rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff);
847 rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff);
848 switch (rtlpriv->phy.rf_type) {
849 case RF_1T2R:
850 case RF_1T1R:
851 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
852 break;
853 case RF_2T2R:
854 case RF_2T2R_GREEN:
855 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
856 break;
857 }
858 }
859
_rtl92de_enable_aspm_back_door(struct ieee80211_hw * hw)860 static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw)
861 {
862 struct rtl_priv *rtlpriv = rtl_priv(hw);
863 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
864
865 rtl_write_byte(rtlpriv, 0x34b, 0x93);
866 rtl_write_word(rtlpriv, 0x350, 0x870c);
867 rtl_write_byte(rtlpriv, 0x352, 0x1);
868 if (ppsc->support_backdoor)
869 rtl_write_byte(rtlpriv, 0x349, 0x1b);
870 else
871 rtl_write_byte(rtlpriv, 0x349, 0x03);
872 rtl_write_word(rtlpriv, 0x350, 0x2718);
873 rtl_write_byte(rtlpriv, 0x352, 0x1);
874 }
875
rtl92de_enable_hw_security_config(struct ieee80211_hw * hw)876 void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw)
877 {
878 struct rtl_priv *rtlpriv = rtl_priv(hw);
879 u8 sec_reg_value;
880
881 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
882 ("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
883 rtlpriv->sec.pairwise_enc_algorithm,
884 rtlpriv->sec.group_enc_algorithm));
885 if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
886 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
887 ("not open hw encryption\n"));
888 return;
889 }
890 sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
891 if (rtlpriv->sec.use_defaultkey) {
892 sec_reg_value |= SCR_TXUSEDK;
893 sec_reg_value |= SCR_RXUSEDK;
894 }
895 sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
896 rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
897 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
898 ("The SECR-value %x\n", sec_reg_value));
899 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
900 }
901
rtl92de_hw_init(struct ieee80211_hw * hw)902 int rtl92de_hw_init(struct ieee80211_hw *hw)
903 {
904 struct rtl_priv *rtlpriv = rtl_priv(hw);
905 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
906 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
907 struct rtl_phy *rtlphy = &(rtlpriv->phy);
908 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
909 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
910 bool rtstatus = true;
911 u8 tmp_u1b;
912 int i;
913 int err;
914 unsigned long flags;
915
916 rtlpci->being_init_adapter = true;
917 rtlpci->init_ready = false;
918 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
919 /* we should do iqk after disable/enable */
920 rtl92d_phy_reset_iqk_result(hw);
921 /* rtlpriv->intf_ops->disable_aspm(hw); */
922 rtstatus = _rtl92de_init_mac(hw);
923 if (rtstatus != true) {
924 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Init MAC failed\n"));
925 err = 1;
926 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
927 return err;
928 }
929 err = rtl92d_download_fw(hw);
930 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
931 if (err) {
932 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
933 ("Failed to download FW. Init HW "
934 "without FW..\n"));
935 rtlhal->fw_ready = false;
936 return 1;
937 } else {
938 rtlhal->fw_ready = true;
939 }
940 rtlhal->last_hmeboxnum = 0;
941 rtlpriv->psc.fw_current_inpsmode = false;
942
943 tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
944 tmp_u1b = tmp_u1b | 0x30;
945 rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
946
947 if (rtlhal->earlymode_enable) {
948 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
949 ("EarlyMode Enabled!!!\n"));
950
951 tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0);
952 tmp_u1b = tmp_u1b | 0x1f;
953 rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b);
954
955 rtl_write_byte(rtlpriv, 0x4d3, 0x80);
956
957 tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
958 tmp_u1b = tmp_u1b | 0x40;
959 rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
960 }
961
962 if (mac->rdg_en) {
963 rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff);
964 rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200);
965 rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05);
966 }
967
968 rtl92d_phy_mac_config(hw);
969 /* because last function modify RCR, so we update
970 * rcr var here, or TP will unstable for receive_config
971 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
972 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
973 rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
974 rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
975
976 rtl92d_phy_bb_config(hw);
977
978 rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
979 /* set before initialize RF */
980 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
981
982 /* config RF */
983 rtl92d_phy_rf_config(hw);
984
985 /* After read predefined TXT, we must set BB/MAC/RF
986 * register as our requirement */
987 /* After load BB,RF params,we need do more for 92D. */
988 rtl92d_update_bbrf_configuration(hw);
989 /* set default value after initialize RF, */
990 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0);
991 rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
992 RF_CHNLBW, BRFREGOFFSETMASK);
993 rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
994 RF_CHNLBW, BRFREGOFFSETMASK);
995
996 /*---- Set CCK and OFDM Block "ON"----*/
997 if (rtlhal->current_bandtype == BAND_ON_2_4G)
998 rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
999 rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
1000 if (rtlhal->interfaceindex == 0) {
1001 /* RFPGA0_ANALOGPARAMETER2: cck clock select,
1002 * set to 20MHz by default */
1003 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) |
1004 BIT(11), 3);
1005 } else {
1006 /* Mac1 */
1007 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) |
1008 BIT(10), 3);
1009 }
1010
1011 _rtl92de_hw_configure(hw);
1012
1013 /* reset hw sec */
1014 rtl_cam_reset_all_entry(hw);
1015 rtl92de_enable_hw_security_config(hw);
1016
1017 /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
1018 /* TX power index for different rate set. */
1019 rtl92d_phy_get_hw_reg_originalvalue(hw);
1020 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel);
1021
1022 ppsc->rfpwr_state = ERFON;
1023
1024 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
1025
1026 _rtl92de_enable_aspm_back_door(hw);
1027 /* rtlpriv->intf_ops->enable_aspm(hw); */
1028
1029 rtl92d_dm_init(hw);
1030 rtlpci->being_init_adapter = false;
1031
1032 if (ppsc->rfpwr_state == ERFON) {
1033 rtl92d_phy_lc_calibrate(hw);
1034 /* 5G and 2.4G must wait sometime to let RF LO ready */
1035 if (rtlhal->macphymode == DUALMAC_DUALPHY) {
1036 u32 tmp_rega;
1037 for (i = 0; i < 10000; i++) {
1038 udelay(MAX_STALL_TIME);
1039
1040 tmp_rega = rtl_get_rfreg(hw,
1041 (enum radio_path)RF90_PATH_A,
1042 0x2a, BMASKDWORD);
1043
1044 if (((tmp_rega & BIT(11)) == BIT(11)))
1045 break;
1046 }
1047 /* check that loop was successful. If not, exit now */
1048 if (i == 10000) {
1049 rtlpci->init_ready = false;
1050 return 1;
1051 }
1052 }
1053 }
1054 rtlpci->init_ready = true;
1055 return err;
1056 }
1057
_rtl92de_read_chip_version(struct ieee80211_hw * hw)1058 static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw)
1059 {
1060 struct rtl_priv *rtlpriv = rtl_priv(hw);
1061 enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1062 u32 value32;
1063
1064 value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG);
1065 if (!(value32 & 0x000f0000)) {
1066 version = VERSION_TEST_CHIP_92D_SINGLEPHY;
1067 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("TEST CHIP!!!\n"));
1068 } else {
1069 version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1070 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Normal CHIP!!!\n"));
1071 }
1072 return version;
1073 }
1074
_rtl92de_set_media_status(struct ieee80211_hw * hw,enum nl80211_iftype type)1075 static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
1076 enum nl80211_iftype type)
1077 {
1078 struct rtl_priv *rtlpriv = rtl_priv(hw);
1079 u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
1080 enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
1081 u8 bcnfunc_enable;
1082
1083 bt_msr &= 0xfc;
1084
1085 if (type == NL80211_IFTYPE_UNSPECIFIED ||
1086 type == NL80211_IFTYPE_STATION) {
1087 _rtl92de_stop_tx_beacon(hw);
1088 _rtl92de_enable_bcn_sub_func(hw);
1089 } else if (type == NL80211_IFTYPE_ADHOC ||
1090 type == NL80211_IFTYPE_AP) {
1091 _rtl92de_resume_tx_beacon(hw);
1092 _rtl92de_disable_bcn_sub_func(hw);
1093 } else {
1094 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1095 ("Set HW_VAR_MEDIA_STATUS: No such media "
1096 "status(%x).\n", type));
1097 }
1098 bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL);
1099 switch (type) {
1100 case NL80211_IFTYPE_UNSPECIFIED:
1101 bt_msr |= MSR_NOLINK;
1102 ledaction = LED_CTL_LINK;
1103 bcnfunc_enable &= 0xF7;
1104 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1105 ("Set Network type to NO LINK!\n"));
1106 break;
1107 case NL80211_IFTYPE_ADHOC:
1108 bt_msr |= MSR_ADHOC;
1109 bcnfunc_enable |= 0x08;
1110 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1111 ("Set Network type to Ad Hoc!\n"));
1112 break;
1113 case NL80211_IFTYPE_STATION:
1114 bt_msr |= MSR_INFRA;
1115 ledaction = LED_CTL_LINK;
1116 bcnfunc_enable &= 0xF7;
1117 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1118 ("Set Network type to STA!\n"));
1119 break;
1120 case NL80211_IFTYPE_AP:
1121 bt_msr |= MSR_AP;
1122 bcnfunc_enable |= 0x08;
1123 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1124 ("Set Network type to AP!\n"));
1125 break;
1126 default:
1127 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1128 ("Network type %d not support!\n", type));
1129 return 1;
1130 break;
1131
1132 }
1133 rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr);
1134 rtlpriv->cfg->ops->led_control(hw, ledaction);
1135 if ((bt_msr & 0xfc) == MSR_AP)
1136 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
1137 else
1138 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
1139 return 0;
1140 }
1141
rtl92de_set_check_bssid(struct ieee80211_hw * hw,bool check_bssid)1142 void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
1143 {
1144 struct rtl_priv *rtlpriv = rtl_priv(hw);
1145 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1146 u32 reg_rcr = rtlpci->receive_config;
1147
1148 if (rtlpriv->psc.rfpwr_state != ERFON)
1149 return;
1150 if (check_bssid) {
1151 reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
1152 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
1153 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
1154 } else if (check_bssid == false) {
1155 reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
1156 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
1157 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
1158 }
1159 }
1160
rtl92de_set_network_type(struct ieee80211_hw * hw,enum nl80211_iftype type)1161 int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
1162 {
1163 struct rtl_priv *rtlpriv = rtl_priv(hw);
1164
1165 if (_rtl92de_set_media_status(hw, type))
1166 return -EOPNOTSUPP;
1167
1168 /* check bssid */
1169 if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
1170 if (type != NL80211_IFTYPE_AP)
1171 rtl92de_set_check_bssid(hw, true);
1172 } else {
1173 rtl92de_set_check_bssid(hw, false);
1174 }
1175 return 0;
1176 }
1177
1178 /* do iqk or reload iqk */
1179 /* windows just rtl92d_phy_reload_iqk_setting in set channel,
1180 * but it's very strict for time sequence so we add
1181 * rtl92d_phy_reload_iqk_setting here */
rtl92d_linked_set_reg(struct ieee80211_hw * hw)1182 void rtl92d_linked_set_reg(struct ieee80211_hw *hw)
1183 {
1184 struct rtl_priv *rtlpriv = rtl_priv(hw);
1185 struct rtl_phy *rtlphy = &(rtlpriv->phy);
1186 u8 indexforchannel;
1187 u8 channel = rtlphy->current_channel;
1188
1189 indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel);
1190 if (!rtlphy->iqk_matrix_regsetting[indexforchannel].iqk_done) {
1191 RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG,
1192 ("Do IQK for channel:%d.\n", channel));
1193 rtl92d_phy_iq_calibrate(hw);
1194 }
1195 }
1196
1197 /* don't set REG_EDCA_BE_PARAM here because
1198 * mac80211 will send pkt when scan */
rtl92de_set_qos(struct ieee80211_hw * hw,int aci)1199 void rtl92de_set_qos(struct ieee80211_hw *hw, int aci)
1200 {
1201 struct rtl_priv *rtlpriv = rtl_priv(hw);
1202 rtl92d_dm_init_edca_turbo(hw);
1203 return;
1204 switch (aci) {
1205 case AC1_BK:
1206 rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
1207 break;
1208 case AC0_BE:
1209 break;
1210 case AC2_VI:
1211 rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322);
1212 break;
1213 case AC3_VO:
1214 rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222);
1215 break;
1216 default:
1217 RT_ASSERT(false, ("invalid aci: %d !\n", aci));
1218 break;
1219 }
1220 }
1221
rtl92de_enable_interrupt(struct ieee80211_hw * hw)1222 void rtl92de_enable_interrupt(struct ieee80211_hw *hw)
1223 {
1224 struct rtl_priv *rtlpriv = rtl_priv(hw);
1225 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1226
1227 rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
1228 rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
1229 }
1230
rtl92de_disable_interrupt(struct ieee80211_hw * hw)1231 void rtl92de_disable_interrupt(struct ieee80211_hw *hw)
1232 {
1233 struct rtl_priv *rtlpriv = rtl_priv(hw);
1234 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1235
1236 rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
1237 rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
1238 synchronize_irq(rtlpci->pdev->irq);
1239 }
1240
_rtl92de_poweroff_adapter(struct ieee80211_hw * hw)1241 static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw)
1242 {
1243 struct rtl_priv *rtlpriv = rtl_priv(hw);
1244 u8 u1b_tmp;
1245 unsigned long flags;
1246
1247 rtlpriv->intf_ops->enable_aspm(hw);
1248 rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
1249 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0);
1250 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0);
1251
1252 /* 0x20:value 05-->04 */
1253 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04);
1254
1255 /* ==== Reset digital sequence ====== */
1256 rtl92d_firmware_selfreset(hw);
1257
1258 /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */
1259 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51);
1260
1261 /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */
1262 rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
1263
1264 /* ==== Pull GPIO PIN to balance level and LED control ====== */
1265
1266 /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */
1267 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
1268
1269 /* i. Value = GPIO_PIN_CTRL[7:0] */
1270 u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
1271
1272 /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */
1273 /* write external PIN level */
1274 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL,
1275 0x00FF0000 | (u1b_tmp << 8));
1276
1277 /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */
1278 rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
1279
1280 /* l. LEDCFG 0x4C[15:0] = 0x8080 */
1281 rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
1282
1283 /* ==== Disable analog sequence === */
1284
1285 /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */
1286 rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
1287
1288 /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */
1289 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
1290
1291 /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */
1292 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
1293
1294 /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */
1295 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
1296
1297 /* ==== interface into suspend === */
1298
1299 /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */
1300 /* According to power document V11, we need to set this */
1301 /* value as 0x18. Otherwise, we may not L0s sometimes. */
1302 /* This indluences power consumption. Bases on SD1's test, */
1303 /* set as 0x00 do not affect power current. And if it */
1304 /* is set as 0x18, they had ever met auto load fail problem. */
1305 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
1306
1307 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1308 ("In PowerOff,reg0x%x=%X\n", REG_SPS0_CTRL,
1309 rtl_read_byte(rtlpriv, REG_SPS0_CTRL)));
1310 /* r. Note: for PCIe interface, PON will not turn */
1311 /* off m-bias and BandGap in PCIe suspend mode. */
1312
1313 /* 0x17[7] 1b': power off in process 0b' : power off over */
1314 if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
1315 spin_lock_irqsave(&globalmutex_power, flags);
1316 u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS);
1317 u1b_tmp &= (~BIT(7));
1318 rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp);
1319 spin_unlock_irqrestore(&globalmutex_power, flags);
1320 }
1321
1322 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("<=======\n"));
1323 }
1324
rtl92de_card_disable(struct ieee80211_hw * hw)1325 void rtl92de_card_disable(struct ieee80211_hw *hw)
1326 {
1327 struct rtl_priv *rtlpriv = rtl_priv(hw);
1328 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
1329 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1330 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1331 enum nl80211_iftype opmode;
1332
1333 mac->link_state = MAC80211_NOLINK;
1334 opmode = NL80211_IFTYPE_UNSPECIFIED;
1335 _rtl92de_set_media_status(hw, opmode);
1336
1337 if (rtlpci->driver_is_goingto_unload ||
1338 ppsc->rfoff_reason > RF_CHANGE_BY_PS)
1339 rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
1340 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
1341 /* Power sequence for each MAC. */
1342 /* a. stop tx DMA */
1343 /* b. close RF */
1344 /* c. clear rx buf */
1345 /* d. stop rx DMA */
1346 /* e. reset MAC */
1347
1348 /* a. stop tx DMA */
1349 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE);
1350 udelay(50);
1351
1352 /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */
1353
1354 /* c. ========RF OFF sequence========== */
1355 /* 0x88c[23:20] = 0xf. */
1356 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
1357 rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
1358
1359 /* APSD_CTRL 0x600[7:0] = 0x40 */
1360 rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
1361
1362 /* Close antenna 0,0xc04,0xd04 */
1363 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0);
1364 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0);
1365
1366 /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */
1367 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
1368
1369 /* Mac0 can not do Global reset. Mac1 can do. */
1370 /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */
1371 if (rtlpriv->rtlhal.interfaceindex == 1)
1372 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0);
1373 udelay(50);
1374
1375 /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */
1376 /* dma hang issue when disable/enable device. */
1377 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff);
1378 udelay(50);
1379 rtl_write_byte(rtlpriv, REG_CR, 0x0);
1380 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("==> Do power off.......\n"));
1381 if (rtl92d_phy_check_poweroff(hw))
1382 _rtl92de_poweroff_adapter(hw);
1383 return;
1384 }
1385
rtl92de_interrupt_recognized(struct ieee80211_hw * hw,u32 * p_inta,u32 * p_intb)1386 void rtl92de_interrupt_recognized(struct ieee80211_hw *hw,
1387 u32 *p_inta, u32 *p_intb)
1388 {
1389 struct rtl_priv *rtlpriv = rtl_priv(hw);
1390 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1391
1392 *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
1393 rtl_write_dword(rtlpriv, ISR, *p_inta);
1394
1395 /*
1396 * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1];
1397 * rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
1398 */
1399 }
1400
rtl92de_set_beacon_related_registers(struct ieee80211_hw * hw)1401 void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw)
1402 {
1403 struct rtl_priv *rtlpriv = rtl_priv(hw);
1404 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1405 u16 bcn_interval, atim_window;
1406
1407 bcn_interval = mac->beacon_interval;
1408 atim_window = 2;
1409 /*rtl92de_disable_interrupt(hw); */
1410 rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
1411 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1412 rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
1413 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20);
1414 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
1415 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30);
1416 else
1417 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20);
1418 rtl_write_byte(rtlpriv, 0x606, 0x30);
1419 }
1420
rtl92de_set_beacon_interval(struct ieee80211_hw * hw)1421 void rtl92de_set_beacon_interval(struct ieee80211_hw *hw)
1422 {
1423 struct rtl_priv *rtlpriv = rtl_priv(hw);
1424 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1425 u16 bcn_interval = mac->beacon_interval;
1426
1427 RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
1428 ("beacon_interval:%d\n", bcn_interval));
1429 /* rtl92de_disable_interrupt(hw); */
1430 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1431 /* rtl92de_enable_interrupt(hw); */
1432 }
1433
rtl92de_update_interrupt_mask(struct ieee80211_hw * hw,u32 add_msr,u32 rm_msr)1434 void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw,
1435 u32 add_msr, u32 rm_msr)
1436 {
1437 struct rtl_priv *rtlpriv = rtl_priv(hw);
1438 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1439
1440 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1441 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
1442 if (add_msr)
1443 rtlpci->irq_mask[0] |= add_msr;
1444 if (rm_msr)
1445 rtlpci->irq_mask[0] &= (~rm_msr);
1446 rtl92de_disable_interrupt(hw);
1447 rtl92de_enable_interrupt(hw);
1448 }
1449
_rtl92de_readpowervalue_fromprom(struct txpower_info * pwrinfo,u8 * rom_content,bool autoLoadfail)1450 static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo,
1451 u8 *rom_content, bool autoLoadfail)
1452 {
1453 u32 rfpath, eeaddr, group, offset1, offset2;
1454 u8 i;
1455
1456 memset(pwrinfo, 0, sizeof(struct txpower_info));
1457 if (autoLoadfail) {
1458 for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1459 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1460 if (group < CHANNEL_GROUP_MAX_2G) {
1461 pwrinfo->cck_index[rfpath][group] =
1462 EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1463 pwrinfo->ht40_1sindex[rfpath][group] =
1464 EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1465 } else {
1466 pwrinfo->ht40_1sindex[rfpath][group] =
1467 EEPROM_DEFAULT_TXPOWERLEVEL_5G;
1468 }
1469 pwrinfo->ht40_2sindexdiff[rfpath][group] =
1470 EEPROM_DEFAULT_HT40_2SDIFF;
1471 pwrinfo->ht20indexdiff[rfpath][group] =
1472 EEPROM_DEFAULT_HT20_DIFF;
1473 pwrinfo->ofdmindexdiff[rfpath][group] =
1474 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1475 pwrinfo->ht40maxoffset[rfpath][group] =
1476 EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1477 pwrinfo->ht20maxoffset[rfpath][group] =
1478 EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1479 }
1480 }
1481 for (i = 0; i < 3; i++) {
1482 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1483 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1484 }
1485 return;
1486 }
1487
1488 /* Maybe autoload OK,buf the tx power index value is not filled.
1489 * If we find it, we set it to default value. */
1490 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1491 for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) {
1492 eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3)
1493 + group;
1494 pwrinfo->cck_index[rfpath][group] =
1495 (rom_content[eeaddr] == 0xFF) ?
1496 (eeaddr > 0x7B ?
1497 EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1498 EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1499 rom_content[eeaddr];
1500 }
1501 }
1502 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1503 for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1504 offset1 = group / 3;
1505 offset2 = group % 3;
1506 eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) +
1507 offset2 + offset1 * 21;
1508 pwrinfo->ht40_1sindex[rfpath][group] =
1509 (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ?
1510 EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1511 EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1512 rom_content[eeaddr];
1513 }
1514 }
1515 /* These just for 92D efuse offset. */
1516 for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1517 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1518 int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G;
1519
1520 offset1 = group / 3;
1521 offset2 = group % 3;
1522
1523 if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF)
1524 pwrinfo->ht40_2sindexdiff[rfpath][group] =
1525 (rom_content[base1 +
1526 offset2 + offset1 * 21] >> (rfpath * 4))
1527 & 0xF;
1528 else
1529 pwrinfo->ht40_2sindexdiff[rfpath][group] =
1530 EEPROM_DEFAULT_HT40_2SDIFF;
1531 if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2
1532 + offset1 * 21] != 0xFF)
1533 pwrinfo->ht20indexdiff[rfpath][group] =
1534 (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G
1535 + offset2 + offset1 * 21] >> (rfpath * 4))
1536 & 0xF;
1537 else
1538 pwrinfo->ht20indexdiff[rfpath][group] =
1539 EEPROM_DEFAULT_HT20_DIFF;
1540 if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2
1541 + offset1 * 21] != 0xFF)
1542 pwrinfo->ofdmindexdiff[rfpath][group] =
1543 (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G
1544 + offset2 + offset1 * 21] >> (rfpath * 4))
1545 & 0xF;
1546 else
1547 pwrinfo->ofdmindexdiff[rfpath][group] =
1548 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1549 if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2
1550 + offset1 * 21] != 0xFF)
1551 pwrinfo->ht40maxoffset[rfpath][group] =
1552 (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G
1553 + offset2 + offset1 * 21] >> (rfpath * 4))
1554 & 0xF;
1555 else
1556 pwrinfo->ht40maxoffset[rfpath][group] =
1557 EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1558 if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2
1559 + offset1 * 21] != 0xFF)
1560 pwrinfo->ht20maxoffset[rfpath][group] =
1561 (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G +
1562 offset2 + offset1 * 21] >> (rfpath * 4)) &
1563 0xF;
1564 else
1565 pwrinfo->ht20maxoffset[rfpath][group] =
1566 EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1567 }
1568 }
1569 if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) {
1570 /* 5GL */
1571 pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F;
1572 pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F;
1573 /* 5GM */
1574 pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F;
1575 pwrinfo->tssi_b[1] =
1576 (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 |
1577 (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2;
1578 /* 5GH */
1579 pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] &
1580 0xF0) >> 4 |
1581 (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4;
1582 pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] &
1583 0xFC) >> 2;
1584 } else {
1585 for (i = 0; i < 3; i++) {
1586 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1587 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1588 }
1589 }
1590 }
1591
_rtl92de_read_txpower_info(struct ieee80211_hw * hw,bool autoload_fail,u8 * hwinfo)1592 static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw,
1593 bool autoload_fail, u8 *hwinfo)
1594 {
1595 struct rtl_priv *rtlpriv = rtl_priv(hw);
1596 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1597 struct txpower_info pwrinfo;
1598 u8 tempval[2], i, pwr, diff;
1599 u32 ch, rfPath, group;
1600
1601 _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail);
1602 if (!autoload_fail) {
1603 /* bit0~2 */
1604 rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7);
1605 rtlefuse->eeprom_thermalmeter =
1606 hwinfo[EEPROM_THERMAL_METER] & 0x1f;
1607 rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K];
1608 tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03;
1609 tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2;
1610 rtlefuse->txpwr_fromeprom = true;
1611 if (IS_92D_D_CUT(rtlpriv->rtlhal.version) ||
1612 IS_92D_E_CUT(rtlpriv->rtlhal.version)) {
1613 rtlefuse->internal_pa_5g[0] =
1614 !((hwinfo[EEPROM_TSSI_A_5G] & BIT(6)) >> 6);
1615 rtlefuse->internal_pa_5g[1] =
1616 !((hwinfo[EEPROM_TSSI_B_5G] & BIT(6)) >> 6);
1617 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
1618 ("Is D cut,Internal PA0 %d Internal PA1 %d\n",
1619 rtlefuse->internal_pa_5g[0],
1620 rtlefuse->internal_pa_5g[1]))
1621 }
1622 rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6];
1623 rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7];
1624 } else {
1625 rtlefuse->eeprom_regulatory = 0;
1626 rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
1627 rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP;
1628 tempval[0] = tempval[1] = 3;
1629 }
1630
1631 /* Use default value to fill parameters if
1632 * efuse is not filled on some place. */
1633
1634 /* ThermalMeter from EEPROM */
1635 if (rtlefuse->eeprom_thermalmeter < 0x06 ||
1636 rtlefuse->eeprom_thermalmeter > 0x1c)
1637 rtlefuse->eeprom_thermalmeter = 0x12;
1638 rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
1639
1640 /* check XTAL_K */
1641 if (rtlefuse->crystalcap == 0xFF)
1642 rtlefuse->crystalcap = 0;
1643 if (rtlefuse->eeprom_regulatory > 3)
1644 rtlefuse->eeprom_regulatory = 0;
1645
1646 for (i = 0; i < 2; i++) {
1647 switch (tempval[i]) {
1648 case 0:
1649 tempval[i] = 5;
1650 break;
1651 case 1:
1652 tempval[i] = 4;
1653 break;
1654 case 2:
1655 tempval[i] = 3;
1656 break;
1657 case 3:
1658 default:
1659 tempval[i] = 0;
1660 break;
1661 }
1662 }
1663
1664 rtlefuse->delta_iqk = tempval[0];
1665 if (tempval[1] > 0)
1666 rtlefuse->delta_lck = tempval[1] - 1;
1667 if (rtlefuse->eeprom_c9 == 0xFF)
1668 rtlefuse->eeprom_c9 = 0x00;
1669 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1670 ("EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
1671 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1672 ("ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter));
1673 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1674 ("CrystalCap = 0x%x\n", rtlefuse->crystalcap));
1675 RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1676 ("Delta_IQK = 0x%x Delta_LCK = 0x%x\n", rtlefuse->delta_iqk,
1677 rtlefuse->delta_lck));
1678
1679 for (rfPath = 0; rfPath < RF6052_MAX_PATH; rfPath++) {
1680 for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
1681 group = rtl92d_get_chnlgroup_fromarray((u8) ch);
1682 if (ch < CHANNEL_MAX_NUMBER_2G)
1683 rtlefuse->txpwrlevel_cck[rfPath][ch] =
1684 pwrinfo.cck_index[rfPath][group];
1685 rtlefuse->txpwrlevel_ht40_1s[rfPath][ch] =
1686 pwrinfo.ht40_1sindex[rfPath][group];
1687 rtlefuse->txpwr_ht20diff[rfPath][ch] =
1688 pwrinfo.ht20indexdiff[rfPath][group];
1689 rtlefuse->txpwr_legacyhtdiff[rfPath][ch] =
1690 pwrinfo.ofdmindexdiff[rfPath][group];
1691 rtlefuse->pwrgroup_ht20[rfPath][ch] =
1692 pwrinfo.ht20maxoffset[rfPath][group];
1693 rtlefuse->pwrgroup_ht40[rfPath][ch] =
1694 pwrinfo.ht40maxoffset[rfPath][group];
1695 pwr = pwrinfo.ht40_1sindex[rfPath][group];
1696 diff = pwrinfo.ht40_2sindexdiff[rfPath][group];
1697 rtlefuse->txpwrlevel_ht40_2s[rfPath][ch] =
1698 (pwr > diff) ? (pwr - diff) : 0;
1699 }
1700 }
1701 }
1702
_rtl92de_read_macphymode_from_prom(struct ieee80211_hw * hw,u8 * content)1703 static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw,
1704 u8 *content)
1705 {
1706 struct rtl_priv *rtlpriv = rtl_priv(hw);
1707 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1708 u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION];
1709
1710 if (macphy_crvalue & BIT(3)) {
1711 rtlhal->macphymode = SINGLEMAC_SINGLEPHY;
1712 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1713 ("MacPhyMode SINGLEMAC_SINGLEPHY\n"));
1714 } else {
1715 rtlhal->macphymode = DUALMAC_DUALPHY;
1716 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1717 ("MacPhyMode DUALMAC_DUALPHY\n"));
1718 }
1719 }
1720
_rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw * hw,u8 * content)1721 static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw,
1722 u8 *content)
1723 {
1724 _rtl92de_read_macphymode_from_prom(hw, content);
1725 rtl92d_phy_config_macphymode(hw);
1726 rtl92d_phy_config_macphymode_info(hw);
1727 }
1728
_rtl92de_efuse_update_chip_version(struct ieee80211_hw * hw)1729 static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
1730 {
1731 struct rtl_priv *rtlpriv = rtl_priv(hw);
1732 enum version_8192d chipver = rtlpriv->rtlhal.version;
1733 u8 cutvalue[2];
1734 u16 chipvalue;
1735
1736 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H,
1737 &cutvalue[1]);
1738 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L,
1739 &cutvalue[0]);
1740 chipvalue = (cutvalue[1] << 8) | cutvalue[0];
1741 switch (chipvalue) {
1742 case 0xAA55:
1743 chipver |= CHIP_92D_C_CUT;
1744 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("C-CUT!!!\n"));
1745 break;
1746 case 0x9966:
1747 chipver |= CHIP_92D_D_CUT;
1748 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("D-CUT!!!\n"));
1749 break;
1750 default:
1751 chipver |= CHIP_92D_D_CUT;
1752 RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("Unkown CUT!\n"));
1753 break;
1754 }
1755 rtlpriv->rtlhal.version = chipver;
1756 }
1757
_rtl92de_read_adapter_info(struct ieee80211_hw * hw)1758 static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
1759 {
1760 struct rtl_priv *rtlpriv = rtl_priv(hw);
1761 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1762 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1763 u16 i, usvalue;
1764 u8 hwinfo[HWSET_MAX_SIZE];
1765 u16 eeprom_id;
1766 unsigned long flags;
1767
1768 if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
1769 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
1770 rtl_efuse_shadow_map_update(hw);
1771 _rtl92de_efuse_update_chip_version(hw);
1772 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
1773 memcpy((void *)hwinfo, (void *)&rtlefuse->efuse_map
1774 [EFUSE_INIT_MAP][0],
1775 HWSET_MAX_SIZE);
1776 } else if (rtlefuse->epromtype == EEPROM_93C46) {
1777 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1778 ("RTL819X Not boot from eeprom, check it !!"));
1779 }
1780 RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
1781 hwinfo, HWSET_MAX_SIZE);
1782
1783 eeprom_id = *((u16 *)&hwinfo[0]);
1784 if (eeprom_id != RTL8190_EEPROM_ID) {
1785 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1786 ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
1787 rtlefuse->autoload_failflag = true;
1788 } else {
1789 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
1790 rtlefuse->autoload_failflag = false;
1791 }
1792 if (rtlefuse->autoload_failflag) {
1793 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1794 ("RTL819X Not boot from eeprom, check it !!"));
1795 return;
1796 }
1797 rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
1798 _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
1799
1800 /* VID, DID SE 0xA-D */
1801 rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
1802 rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
1803 rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
1804 rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
1805 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1806 ("EEPROMId = 0x%4x\n", eeprom_id));
1807 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1808 ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
1809 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1810 ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
1811 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1812 ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
1813 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1814 ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
1815
1816 /* Read Permanent MAC address */
1817 if (rtlhal->interfaceindex == 0) {
1818 for (i = 0; i < 6; i += 2) {
1819 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i];
1820 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1821 }
1822 } else {
1823 for (i = 0; i < 6; i += 2) {
1824 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
1825 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1826 }
1827 }
1828 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR,
1829 rtlefuse->dev_addr);
1830 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
1831 ("%pM\n", rtlefuse->dev_addr));
1832 _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo);
1833
1834 /* Read Channel Plan */
1835 switch (rtlhal->bandset) {
1836 case BAND_ON_2_4G:
1837 rtlefuse->channel_plan = COUNTRY_CODE_TELEC;
1838 break;
1839 case BAND_ON_5G:
1840 rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1841 break;
1842 case BAND_ON_BOTH:
1843 rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1844 break;
1845 default:
1846 rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1847 break;
1848 }
1849 rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
1850 rtlefuse->txpwr_fromeprom = true;
1851 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1852 ("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
1853 }
1854
rtl92de_read_eeprom_info(struct ieee80211_hw * hw)1855 void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
1856 {
1857 struct rtl_priv *rtlpriv = rtl_priv(hw);
1858 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1859 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1860 u8 tmp_u1b;
1861
1862 rtlhal->version = _rtl92de_read_chip_version(hw);
1863 tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
1864 rtlefuse->autoload_status = tmp_u1b;
1865 if (tmp_u1b & BIT(4)) {
1866 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
1867 rtlefuse->epromtype = EEPROM_93C46;
1868 } else {
1869 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
1870 rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
1871 }
1872 if (tmp_u1b & BIT(5)) {
1873 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
1874
1875 rtlefuse->autoload_failflag = false;
1876 _rtl92de_read_adapter_info(hw);
1877 } else {
1878 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
1879 }
1880 return;
1881 }
1882
rtl92de_update_hal_rate_table(struct ieee80211_hw * hw,struct ieee80211_sta * sta)1883 static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw,
1884 struct ieee80211_sta *sta)
1885 {
1886 struct rtl_priv *rtlpriv = rtl_priv(hw);
1887 struct rtl_phy *rtlphy = &(rtlpriv->phy);
1888 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1889 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1890 u32 ratr_value;
1891 u8 ratr_index = 0;
1892 u8 nmode = mac->ht_enable;
1893 u8 mimo_ps = IEEE80211_SMPS_OFF;
1894 u16 shortgi_rate;
1895 u32 tmp_ratr_value;
1896 u8 curtxbw_40mhz = mac->bw_40;
1897 u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1898 1 : 0;
1899 u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1900 1 : 0;
1901 enum wireless_mode wirelessmode = mac->mode;
1902
1903 if (rtlhal->current_bandtype == BAND_ON_5G)
1904 ratr_value = sta->supp_rates[1] << 4;
1905 else
1906 ratr_value = sta->supp_rates[0];
1907 ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
1908 sta->ht_cap.mcs.rx_mask[0] << 12);
1909 switch (wirelessmode) {
1910 case WIRELESS_MODE_A:
1911 ratr_value &= 0x00000FF0;
1912 break;
1913 case WIRELESS_MODE_B:
1914 if (ratr_value & 0x0000000c)
1915 ratr_value &= 0x0000000d;
1916 else
1917 ratr_value &= 0x0000000f;
1918 break;
1919 case WIRELESS_MODE_G:
1920 ratr_value &= 0x00000FF5;
1921 break;
1922 case WIRELESS_MODE_N_24G:
1923 case WIRELESS_MODE_N_5G:
1924 nmode = 1;
1925 if (mimo_ps == IEEE80211_SMPS_STATIC) {
1926 ratr_value &= 0x0007F005;
1927 } else {
1928 u32 ratr_mask;
1929
1930 if (get_rf_type(rtlphy) == RF_1T2R ||
1931 get_rf_type(rtlphy) == RF_1T1R) {
1932 ratr_mask = 0x000ff005;
1933 } else {
1934 ratr_mask = 0x0f0ff005;
1935 }
1936
1937 ratr_value &= ratr_mask;
1938 }
1939 break;
1940 default:
1941 if (rtlphy->rf_type == RF_1T2R)
1942 ratr_value &= 0x000ff0ff;
1943 else
1944 ratr_value &= 0x0f0ff0ff;
1945
1946 break;
1947 }
1948 ratr_value &= 0x0FFFFFFF;
1949 if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
1950 (!curtxbw_40mhz && curshortgi_20mhz))) {
1951 ratr_value |= 0x10000000;
1952 tmp_ratr_value = (ratr_value >> 12);
1953 for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
1954 if ((1 << shortgi_rate) & tmp_ratr_value)
1955 break;
1956 }
1957 shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
1958 (shortgi_rate << 4) | (shortgi_rate);
1959 }
1960 rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
1961 RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
1962 ("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0)));
1963 }
1964
rtl92de_update_hal_rate_mask(struct ieee80211_hw * hw,struct ieee80211_sta * sta,u8 rssi_level)1965 static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
1966 struct ieee80211_sta *sta, u8 rssi_level)
1967 {
1968 struct rtl_priv *rtlpriv = rtl_priv(hw);
1969 struct rtl_phy *rtlphy = &(rtlpriv->phy);
1970 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1971 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1972 struct rtl_sta_info *sta_entry = NULL;
1973 u32 ratr_bitmap;
1974 u8 ratr_index;
1975 u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
1976 ? 1 : 0;
1977 u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1978 1 : 0;
1979 u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1980 1 : 0;
1981 enum wireless_mode wirelessmode = 0;
1982 bool shortgi = false;
1983 u32 value[2];
1984 u8 macid = 0;
1985 u8 mimo_ps = IEEE80211_SMPS_OFF;
1986
1987 sta_entry = (struct rtl_sta_info *) sta->drv_priv;
1988 mimo_ps = sta_entry->mimo_ps;
1989 wirelessmode = sta_entry->wireless_mode;
1990 if (mac->opmode == NL80211_IFTYPE_STATION)
1991 curtxbw_40mhz = mac->bw_40;
1992 else if (mac->opmode == NL80211_IFTYPE_AP ||
1993 mac->opmode == NL80211_IFTYPE_ADHOC)
1994 macid = sta->aid + 1;
1995
1996 if (rtlhal->current_bandtype == BAND_ON_5G)
1997 ratr_bitmap = sta->supp_rates[1] << 4;
1998 else
1999 ratr_bitmap = sta->supp_rates[0];
2000 ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
2001 sta->ht_cap.mcs.rx_mask[0] << 12);
2002 switch (wirelessmode) {
2003 case WIRELESS_MODE_B:
2004 ratr_index = RATR_INX_WIRELESS_B;
2005 if (ratr_bitmap & 0x0000000c)
2006 ratr_bitmap &= 0x0000000d;
2007 else
2008 ratr_bitmap &= 0x0000000f;
2009 break;
2010 case WIRELESS_MODE_G:
2011 ratr_index = RATR_INX_WIRELESS_GB;
2012
2013 if (rssi_level == 1)
2014 ratr_bitmap &= 0x00000f00;
2015 else if (rssi_level == 2)
2016 ratr_bitmap &= 0x00000ff0;
2017 else
2018 ratr_bitmap &= 0x00000ff5;
2019 break;
2020 case WIRELESS_MODE_A:
2021 ratr_index = RATR_INX_WIRELESS_G;
2022 ratr_bitmap &= 0x00000ff0;
2023 break;
2024 case WIRELESS_MODE_N_24G:
2025 case WIRELESS_MODE_N_5G:
2026 if (wirelessmode == WIRELESS_MODE_N_24G)
2027 ratr_index = RATR_INX_WIRELESS_NGB;
2028 else
2029 ratr_index = RATR_INX_WIRELESS_NG;
2030 if (mimo_ps == IEEE80211_SMPS_STATIC) {
2031 if (rssi_level == 1)
2032 ratr_bitmap &= 0x00070000;
2033 else if (rssi_level == 2)
2034 ratr_bitmap &= 0x0007f000;
2035 else
2036 ratr_bitmap &= 0x0007f005;
2037 } else {
2038 if (rtlphy->rf_type == RF_1T2R ||
2039 rtlphy->rf_type == RF_1T1R) {
2040 if (curtxbw_40mhz) {
2041 if (rssi_level == 1)
2042 ratr_bitmap &= 0x000f0000;
2043 else if (rssi_level == 2)
2044 ratr_bitmap &= 0x000ff000;
2045 else
2046 ratr_bitmap &= 0x000ff015;
2047 } else {
2048 if (rssi_level == 1)
2049 ratr_bitmap &= 0x000f0000;
2050 else if (rssi_level == 2)
2051 ratr_bitmap &= 0x000ff000;
2052 else
2053 ratr_bitmap &= 0x000ff005;
2054 }
2055 } else {
2056 if (curtxbw_40mhz) {
2057 if (rssi_level == 1)
2058 ratr_bitmap &= 0x0f0f0000;
2059 else if (rssi_level == 2)
2060 ratr_bitmap &= 0x0f0ff000;
2061 else
2062 ratr_bitmap &= 0x0f0ff015;
2063 } else {
2064 if (rssi_level == 1)
2065 ratr_bitmap &= 0x0f0f0000;
2066 else if (rssi_level == 2)
2067 ratr_bitmap &= 0x0f0ff000;
2068 else
2069 ratr_bitmap &= 0x0f0ff005;
2070 }
2071 }
2072 }
2073 if ((curtxbw_40mhz && curshortgi_40mhz) ||
2074 (!curtxbw_40mhz && curshortgi_20mhz)) {
2075
2076 if (macid == 0)
2077 shortgi = true;
2078 else if (macid == 1)
2079 shortgi = false;
2080 }
2081 break;
2082 default:
2083 ratr_index = RATR_INX_WIRELESS_NGB;
2084
2085 if (rtlphy->rf_type == RF_1T2R)
2086 ratr_bitmap &= 0x000ff0ff;
2087 else
2088 ratr_bitmap &= 0x0f0ff0ff;
2089 break;
2090 }
2091
2092 value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
2093 value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
2094 RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
2095 ("ratr_bitmap :%x value0:%x value1:%x\n",
2096 ratr_bitmap, value[0], value[1]));
2097 rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value);
2098 if (macid != 0)
2099 sta_entry->ratr_index = ratr_index;
2100 }
2101
rtl92de_update_hal_rate_tbl(struct ieee80211_hw * hw,struct ieee80211_sta * sta,u8 rssi_level)2102 void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw,
2103 struct ieee80211_sta *sta, u8 rssi_level)
2104 {
2105 struct rtl_priv *rtlpriv = rtl_priv(hw);
2106
2107 if (rtlpriv->dm.useramask)
2108 rtl92de_update_hal_rate_mask(hw, sta, rssi_level);
2109 else
2110 rtl92de_update_hal_rate_table(hw, sta);
2111 }
2112
rtl92de_update_channel_access_setting(struct ieee80211_hw * hw)2113 void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw)
2114 {
2115 struct rtl_priv *rtlpriv = rtl_priv(hw);
2116 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2117 u16 sifs_timer;
2118
2119 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
2120 (u8 *)&mac->slot_time);
2121 if (!mac->ht_enable)
2122 sifs_timer = 0x0a0a;
2123 else
2124 sifs_timer = 0x1010;
2125 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
2126 }
2127
rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw * hw,u8 * valid)2128 bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
2129 {
2130 struct rtl_priv *rtlpriv = rtl_priv(hw);
2131 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
2132 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2133 enum rf_pwrstate e_rfpowerstate_toset;
2134 u8 u1tmp;
2135 bool actuallyset = false;
2136 unsigned long flag;
2137
2138 if (rtlpci->being_init_adapter)
2139 return false;
2140 if (ppsc->swrf_processing)
2141 return false;
2142 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2143 if (ppsc->rfchange_inprogress) {
2144 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2145 return false;
2146 } else {
2147 ppsc->rfchange_inprogress = true;
2148 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2149 }
2150 rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
2151 REG_MAC_PINMUX_CFG) & ~(BIT(3)));
2152 u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
2153 e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
2154 if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) {
2155 RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2156 ("GPIOChangeRF - HW Radio ON, RF ON\n"));
2157 e_rfpowerstate_toset = ERFON;
2158 ppsc->hwradiooff = false;
2159 actuallyset = true;
2160 } else if ((ppsc->hwradiooff == false)
2161 && (e_rfpowerstate_toset == ERFOFF)) {
2162 RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2163 ("GPIOChangeRF - HW Radio OFF, RF OFF\n"));
2164 e_rfpowerstate_toset = ERFOFF;
2165 ppsc->hwradiooff = true;
2166 actuallyset = true;
2167 }
2168 if (actuallyset) {
2169 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2170 ppsc->rfchange_inprogress = false;
2171 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2172 } else {
2173 if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
2174 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
2175 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2176 ppsc->rfchange_inprogress = false;
2177 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2178 }
2179 *valid = 1;
2180 return !ppsc->hwradiooff;
2181 }
2182
rtl92de_set_key(struct ieee80211_hw * hw,u32 key_index,u8 * p_macaddr,bool is_group,u8 enc_algo,bool is_wepkey,bool clear_all)2183 void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
2184 u8 *p_macaddr, bool is_group, u8 enc_algo,
2185 bool is_wepkey, bool clear_all)
2186 {
2187 struct rtl_priv *rtlpriv = rtl_priv(hw);
2188 struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2189 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
2190 u8 *macaddr = p_macaddr;
2191 u32 entry_id;
2192 bool is_pairwise = false;
2193 static u8 cam_const_addr[4][6] = {
2194 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
2195 {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
2196 {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
2197 {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
2198 };
2199 static u8 cam_const_broad[] = {
2200 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
2201 };
2202
2203 if (clear_all) {
2204 u8 idx;
2205 u8 cam_offset = 0;
2206 u8 clear_number = 5;
2207 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
2208 for (idx = 0; idx < clear_number; idx++) {
2209 rtl_cam_mark_invalid(hw, cam_offset + idx);
2210 rtl_cam_empty_entry(hw, cam_offset + idx);
2211
2212 if (idx < 5) {
2213 memset(rtlpriv->sec.key_buf[idx], 0,
2214 MAX_KEY_LEN);
2215 rtlpriv->sec.key_len[idx] = 0;
2216 }
2217 }
2218 } else {
2219 switch (enc_algo) {
2220 case WEP40_ENCRYPTION:
2221 enc_algo = CAM_WEP40;
2222 break;
2223 case WEP104_ENCRYPTION:
2224 enc_algo = CAM_WEP104;
2225 break;
2226 case TKIP_ENCRYPTION:
2227 enc_algo = CAM_TKIP;
2228 break;
2229 case AESCCMP_ENCRYPTION:
2230 enc_algo = CAM_AES;
2231 break;
2232 default:
2233 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
2234 "not process\n"));
2235 enc_algo = CAM_TKIP;
2236 break;
2237 }
2238 if (is_wepkey || rtlpriv->sec.use_defaultkey) {
2239 macaddr = cam_const_addr[key_index];
2240 entry_id = key_index;
2241 } else {
2242 if (is_group) {
2243 macaddr = cam_const_broad;
2244 entry_id = key_index;
2245 } else {
2246 if (mac->opmode == NL80211_IFTYPE_AP) {
2247 entry_id = rtl_cam_get_free_entry(hw,
2248 p_macaddr);
2249 if (entry_id >= TOTAL_CAM_ENTRY) {
2250 RT_TRACE(rtlpriv, COMP_SEC,
2251 DBG_EMERG, ("Can not "
2252 "find free hw security"
2253 " cam entry\n"));
2254 return;
2255 }
2256 } else {
2257 entry_id = CAM_PAIRWISE_KEY_POSITION;
2258 }
2259 key_index = PAIRWISE_KEYIDX;
2260 is_pairwise = true;
2261 }
2262 }
2263 if (rtlpriv->sec.key_len[key_index] == 0) {
2264 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2265 ("delete one entry, entry_id is %d\n",
2266 entry_id));
2267 if (mac->opmode == NL80211_IFTYPE_AP)
2268 rtl_cam_del_entry(hw, p_macaddr);
2269 rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
2270 } else {
2271 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2272 ("The insert KEY length is %d\n",
2273 rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
2274 RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2275 ("The insert KEY is %x %x\n",
2276 rtlpriv->sec.key_buf[0][0],
2277 rtlpriv->sec.key_buf[0][1]));
2278 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2279 ("add one entry\n"));
2280 if (is_pairwise) {
2281 RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
2282 "Pairwiase Key content :",
2283 rtlpriv->sec.pairwise_key,
2284 rtlpriv->
2285 sec.key_len[PAIRWISE_KEYIDX]);
2286 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2287 ("set Pairwiase key\n"));
2288 rtl_cam_add_one_entry(hw, macaddr, key_index,
2289 entry_id, enc_algo,
2290 CAM_CONFIG_NO_USEDK,
2291 rtlpriv->
2292 sec.key_buf[key_index]);
2293 } else {
2294 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2295 ("set group key\n"));
2296 if (mac->opmode == NL80211_IFTYPE_ADHOC) {
2297 rtl_cam_add_one_entry(hw,
2298 rtlefuse->dev_addr,
2299 PAIRWISE_KEYIDX,
2300 CAM_PAIRWISE_KEY_POSITION,
2301 enc_algo, CAM_CONFIG_NO_USEDK,
2302 rtlpriv->sec.key_buf[entry_id]);
2303 }
2304 rtl_cam_add_one_entry(hw, macaddr, key_index,
2305 entry_id, enc_algo,
2306 CAM_CONFIG_NO_USEDK,
2307 rtlpriv->sec.key_buf
2308 [entry_id]);
2309 }
2310 }
2311 }
2312 }
2313
rtl92de_suspend(struct ieee80211_hw * hw)2314 void rtl92de_suspend(struct ieee80211_hw *hw)
2315 {
2316 struct rtl_priv *rtlpriv = rtl_priv(hw);
2317
2318 rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv,
2319 REG_MAC_PHY_CTRL_NORMAL);
2320 }
2321
rtl92de_resume(struct ieee80211_hw * hw)2322 void rtl92de_resume(struct ieee80211_hw *hw)
2323 {
2324 struct rtl_priv *rtlpriv = rtl_priv(hw);
2325
2326 rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL,
2327 rtlpriv->rtlhal.macphyctl_reg);
2328 }
2329