1 /*
2  * mac80211 glue code for mac80211 Prism54 drivers
3  *
4  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
5  * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
6  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
7  *
8  * Based on:
9  * - the islsm (softmac prism54) driver, which is:
10  *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
11  * - stlc45xx driver
12  *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18 
19 #include <linux/init.h>
20 #include <linux/slab.h>
21 #include <linux/firmware.h>
22 #include <linux/etherdevice.h>
23 #include <linux/module.h>
24 
25 #include <net/mac80211.h>
26 
27 #include "p54.h"
28 #include "lmac.h"
29 
30 static bool modparam_nohwcrypt;
31 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
32 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
33 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
34 MODULE_DESCRIPTION("Softmac Prism54 common code");
35 MODULE_LICENSE("GPL");
36 MODULE_ALIAS("prism54common");
37 
p54_sta_add_remove(struct ieee80211_hw * hw,struct ieee80211_vif * vif,struct ieee80211_sta * sta)38 static int p54_sta_add_remove(struct ieee80211_hw *hw,
39 			      struct ieee80211_vif *vif,
40 			      struct ieee80211_sta *sta)
41 {
42 	struct p54_common *priv = hw->priv;
43 
44 	/*
45 	 * Notify the firmware that we don't want or we don't
46 	 * need to buffer frames for this station anymore.
47 	 */
48 
49 	p54_sta_unlock(priv, sta->addr);
50 
51 	return 0;
52 }
53 
p54_sta_notify(struct ieee80211_hw * dev,struct ieee80211_vif * vif,enum sta_notify_cmd notify_cmd,struct ieee80211_sta * sta)54 static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
55 			      enum sta_notify_cmd notify_cmd,
56 			      struct ieee80211_sta *sta)
57 {
58 	struct p54_common *priv = dev->priv;
59 
60 	switch (notify_cmd) {
61 	case STA_NOTIFY_AWAKE:
62 		/* update the firmware's filter table */
63 		p54_sta_unlock(priv, sta->addr);
64 		break;
65 	default:
66 		break;
67 	}
68 }
69 
p54_set_tim(struct ieee80211_hw * dev,struct ieee80211_sta * sta,bool set)70 static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
71 			bool set)
72 {
73 	struct p54_common *priv = dev->priv;
74 
75 	return p54_update_beacon_tim(priv, sta->aid, set);
76 }
77 
p54_find_ie(struct sk_buff * skb,u8 ie)78 u8 *p54_find_ie(struct sk_buff *skb, u8 ie)
79 {
80 	struct ieee80211_mgmt *mgmt = (void *)skb->data;
81 	u8 *pos, *end;
82 
83 	if (skb->len <= sizeof(mgmt))
84 		return NULL;
85 
86 	pos = (u8 *)mgmt->u.beacon.variable;
87 	end = skb->data + skb->len;
88 	while (pos < end) {
89 		if (pos + 2 + pos[1] > end)
90 			return NULL;
91 
92 		if (pos[0] == ie)
93 			return pos;
94 
95 		pos += 2 + pos[1];
96 	}
97 	return NULL;
98 }
99 
p54_beacon_format_ie_tim(struct sk_buff * skb)100 static int p54_beacon_format_ie_tim(struct sk_buff *skb)
101 {
102 	/*
103 	 * the good excuse for this mess is ... the firmware.
104 	 * The dummy TIM MUST be at the end of the beacon frame,
105 	 * because it'll be overwritten!
106 	 */
107 	u8 *tim;
108 	u8 dtim_len;
109 	u8 dtim_period;
110 	u8 *next;
111 
112 	tim = p54_find_ie(skb, WLAN_EID_TIM);
113 	if (!tim)
114 		return 0;
115 
116 	dtim_len = tim[1];
117 	dtim_period = tim[3];
118 	next = tim + 2 + dtim_len;
119 
120 	if (dtim_len < 3)
121 		return -EINVAL;
122 
123 	memmove(tim, next, skb_tail_pointer(skb) - next);
124 	tim = skb_tail_pointer(skb) - (dtim_len + 2);
125 
126 	/* add the dummy at the end */
127 	tim[0] = WLAN_EID_TIM;
128 	tim[1] = 3;
129 	tim[2] = 0;
130 	tim[3] = dtim_period;
131 	tim[4] = 0;
132 
133 	if (dtim_len > 3)
134 		skb_trim(skb, skb->len - (dtim_len - 3));
135 
136 	return 0;
137 }
138 
p54_beacon_update(struct p54_common * priv,struct ieee80211_vif * vif)139 static int p54_beacon_update(struct p54_common *priv,
140 			struct ieee80211_vif *vif)
141 {
142 	struct sk_buff *beacon;
143 	int ret;
144 
145 	beacon = ieee80211_beacon_get(priv->hw, vif);
146 	if (!beacon)
147 		return -ENOMEM;
148 	ret = p54_beacon_format_ie_tim(beacon);
149 	if (ret)
150 		return ret;
151 
152 	/*
153 	 * During operation, the firmware takes care of beaconing.
154 	 * The driver only needs to upload a new beacon template, once
155 	 * the template was changed by the stack or userspace.
156 	 *
157 	 * LMAC API 3.2.2 also specifies that the driver does not need
158 	 * to cancel the old beacon template by hand, instead the firmware
159 	 * will release the previous one through the feedback mechanism.
160 	 */
161 	p54_tx_80211(priv->hw, beacon);
162 	priv->tsf_high32 = 0;
163 	priv->tsf_low32 = 0;
164 
165 	return 0;
166 }
167 
p54_start(struct ieee80211_hw * dev)168 static int p54_start(struct ieee80211_hw *dev)
169 {
170 	struct p54_common *priv = dev->priv;
171 	int err;
172 
173 	mutex_lock(&priv->conf_mutex);
174 	err = priv->open(dev);
175 	if (err)
176 		goto out;
177 	P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47);
178 	P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94);
179 	P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0);
180 	P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0);
181 	err = p54_set_edcf(priv);
182 	if (err)
183 		goto out;
184 
185 	memset(priv->bssid, ~0, ETH_ALEN);
186 	priv->mode = NL80211_IFTYPE_MONITOR;
187 	err = p54_setup_mac(priv);
188 	if (err) {
189 		priv->mode = NL80211_IFTYPE_UNSPECIFIED;
190 		goto out;
191 	}
192 
193 	ieee80211_queue_delayed_work(dev, &priv->work, 0);
194 
195 	priv->softled_state = 0;
196 	err = p54_set_leds(priv);
197 
198 out:
199 	mutex_unlock(&priv->conf_mutex);
200 	return err;
201 }
202 
p54_stop(struct ieee80211_hw * dev)203 static void p54_stop(struct ieee80211_hw *dev)
204 {
205 	struct p54_common *priv = dev->priv;
206 	int i;
207 
208 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
209 	priv->softled_state = 0;
210 	cancel_delayed_work_sync(&priv->work);
211 	mutex_lock(&priv->conf_mutex);
212 	p54_set_leds(priv);
213 	priv->stop(dev);
214 	skb_queue_purge(&priv->tx_pending);
215 	skb_queue_purge(&priv->tx_queue);
216 	for (i = 0; i < P54_QUEUE_NUM; i++) {
217 		priv->tx_stats[i].count = 0;
218 		priv->tx_stats[i].len = 0;
219 	}
220 
221 	priv->beacon_req_id = cpu_to_le32(0);
222 	priv->tsf_high32 = priv->tsf_low32 = 0;
223 	mutex_unlock(&priv->conf_mutex);
224 }
225 
p54_add_interface(struct ieee80211_hw * dev,struct ieee80211_vif * vif)226 static int p54_add_interface(struct ieee80211_hw *dev,
227 			     struct ieee80211_vif *vif)
228 {
229 	struct p54_common *priv = dev->priv;
230 
231 	mutex_lock(&priv->conf_mutex);
232 	if (priv->mode != NL80211_IFTYPE_MONITOR) {
233 		mutex_unlock(&priv->conf_mutex);
234 		return -EOPNOTSUPP;
235 	}
236 
237 	priv->vif = vif;
238 
239 	switch (vif->type) {
240 	case NL80211_IFTYPE_STATION:
241 	case NL80211_IFTYPE_ADHOC:
242 	case NL80211_IFTYPE_AP:
243 	case NL80211_IFTYPE_MESH_POINT:
244 		priv->mode = vif->type;
245 		break;
246 	default:
247 		mutex_unlock(&priv->conf_mutex);
248 		return -EOPNOTSUPP;
249 	}
250 
251 	memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
252 	p54_setup_mac(priv);
253 	mutex_unlock(&priv->conf_mutex);
254 	return 0;
255 }
256 
p54_remove_interface(struct ieee80211_hw * dev,struct ieee80211_vif * vif)257 static void p54_remove_interface(struct ieee80211_hw *dev,
258 				 struct ieee80211_vif *vif)
259 {
260 	struct p54_common *priv = dev->priv;
261 
262 	mutex_lock(&priv->conf_mutex);
263 	priv->vif = NULL;
264 
265 	/*
266 	 * LMAC API 3.2.2 states that any active beacon template must be
267 	 * canceled by the driver before attempting a mode transition.
268 	 */
269 	if (le32_to_cpu(priv->beacon_req_id) != 0) {
270 		p54_tx_cancel(priv, priv->beacon_req_id);
271 		wait_for_completion_interruptible_timeout(&priv->beacon_comp, HZ);
272 	}
273 	priv->mode = NL80211_IFTYPE_MONITOR;
274 	memset(priv->mac_addr, 0, ETH_ALEN);
275 	memset(priv->bssid, 0, ETH_ALEN);
276 	p54_setup_mac(priv);
277 	mutex_unlock(&priv->conf_mutex);
278 }
279 
p54_wait_for_stats(struct ieee80211_hw * dev)280 static int p54_wait_for_stats(struct ieee80211_hw *dev)
281 {
282 	struct p54_common *priv = dev->priv;
283 	int ret;
284 
285 	priv->update_stats = true;
286 	ret = p54_fetch_statistics(priv);
287 	if (ret)
288 		return ret;
289 
290 	ret = wait_for_completion_interruptible_timeout(&priv->stat_comp, HZ);
291 	if (ret == 0)
292 		return -ETIMEDOUT;
293 
294 	return 0;
295 }
296 
p54_reset_stats(struct p54_common * priv)297 static void p54_reset_stats(struct p54_common *priv)
298 {
299 	struct ieee80211_channel *chan = priv->curchan;
300 
301 	if (chan) {
302 		struct survey_info *info = &priv->survey[chan->hw_value];
303 
304 		/* only reset channel statistics, don't touch .filled, etc. */
305 		info->channel_time = 0;
306 		info->channel_time_busy = 0;
307 		info->channel_time_tx = 0;
308 	}
309 
310 	priv->update_stats = true;
311 	priv->survey_raw.active = 0;
312 	priv->survey_raw.cca = 0;
313 	priv->survey_raw.tx = 0;
314 }
315 
p54_config(struct ieee80211_hw * dev,u32 changed)316 static int p54_config(struct ieee80211_hw *dev, u32 changed)
317 {
318 	int ret = 0;
319 	struct p54_common *priv = dev->priv;
320 	struct ieee80211_conf *conf = &dev->conf;
321 
322 	mutex_lock(&priv->conf_mutex);
323 	if (changed & IEEE80211_CONF_CHANGE_POWER)
324 		priv->output_power = conf->power_level << 2;
325 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
326 		struct ieee80211_channel *oldchan;
327 		WARN_ON(p54_wait_for_stats(dev));
328 		oldchan = priv->curchan;
329 		priv->curchan = NULL;
330 		ret = p54_scan(priv, P54_SCAN_EXIT, 0);
331 		if (ret) {
332 			priv->curchan = oldchan;
333 			goto out;
334 		}
335 		/*
336 		 * TODO: Use the LM_SCAN_TRAP to determine the current
337 		 * operating channel.
338 		 */
339 		priv->curchan = priv->hw->conf.channel;
340 		p54_reset_stats(priv);
341 		WARN_ON(p54_fetch_statistics(priv));
342 	}
343 	if (changed & IEEE80211_CONF_CHANGE_PS) {
344 		WARN_ON(p54_wait_for_stats(dev));
345 		ret = p54_set_ps(priv);
346 		if (ret)
347 			goto out;
348 		WARN_ON(p54_wait_for_stats(dev));
349 	}
350 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
351 		WARN_ON(p54_wait_for_stats(dev));
352 		ret = p54_setup_mac(priv);
353 		if (ret)
354 			goto out;
355 		WARN_ON(p54_wait_for_stats(dev));
356 	}
357 
358 out:
359 	mutex_unlock(&priv->conf_mutex);
360 	return ret;
361 }
362 
p54_prepare_multicast(struct ieee80211_hw * dev,struct netdev_hw_addr_list * mc_list)363 static u64 p54_prepare_multicast(struct ieee80211_hw *dev,
364 				 struct netdev_hw_addr_list *mc_list)
365 {
366 	struct p54_common *priv = dev->priv;
367 	struct netdev_hw_addr *ha;
368 	int i;
369 
370 	BUILD_BUG_ON(ARRAY_SIZE(priv->mc_maclist) !=
371 		ARRAY_SIZE(((struct p54_group_address_table *)NULL)->mac_list));
372 	/*
373 	 * The first entry is reserved for the global broadcast MAC.
374 	 * Otherwise the firmware will drop it and ARP will no longer work.
375 	 */
376 	i = 1;
377 	priv->mc_maclist_num = netdev_hw_addr_list_count(mc_list) + i;
378 	netdev_hw_addr_list_for_each(ha, mc_list) {
379 		memcpy(&priv->mc_maclist[i], ha->addr, ETH_ALEN);
380 		i++;
381 		if (i >= ARRAY_SIZE(priv->mc_maclist))
382 			break;
383 	}
384 
385 	return 1; /* update */
386 }
387 
p54_configure_filter(struct ieee80211_hw * dev,unsigned int changed_flags,unsigned int * total_flags,u64 multicast)388 static void p54_configure_filter(struct ieee80211_hw *dev,
389 				 unsigned int changed_flags,
390 				 unsigned int *total_flags,
391 				 u64 multicast)
392 {
393 	struct p54_common *priv = dev->priv;
394 
395 	*total_flags &= FIF_PROMISC_IN_BSS |
396 			FIF_ALLMULTI |
397 			FIF_OTHER_BSS;
398 
399 	priv->filter_flags = *total_flags;
400 
401 	if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
402 		p54_setup_mac(priv);
403 
404 	if (changed_flags & FIF_ALLMULTI || multicast)
405 		p54_set_groupfilter(priv);
406 }
407 
p54_conf_tx(struct ieee80211_hw * dev,struct ieee80211_vif * vif,u16 queue,const struct ieee80211_tx_queue_params * params)408 static int p54_conf_tx(struct ieee80211_hw *dev,
409 		       struct ieee80211_vif *vif, u16 queue,
410 		       const struct ieee80211_tx_queue_params *params)
411 {
412 	struct p54_common *priv = dev->priv;
413 	int ret;
414 
415 	mutex_lock(&priv->conf_mutex);
416 	if (queue < dev->queues) {
417 		P54_SET_QUEUE(priv->qos_params[queue], params->aifs,
418 			params->cw_min, params->cw_max, params->txop);
419 		ret = p54_set_edcf(priv);
420 	} else
421 		ret = -EINVAL;
422 	mutex_unlock(&priv->conf_mutex);
423 	return ret;
424 }
425 
p54_work(struct work_struct * work)426 static void p54_work(struct work_struct *work)
427 {
428 	struct p54_common *priv = container_of(work, struct p54_common,
429 					       work.work);
430 
431 	if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
432 		return ;
433 
434 	/*
435 	 * TODO: walk through tx_queue and do the following tasks
436 	 * 	1. initiate bursts.
437 	 *      2. cancel stuck frames / reset the device if necessary.
438 	 */
439 
440 	mutex_lock(&priv->conf_mutex);
441 	WARN_ON_ONCE(p54_fetch_statistics(priv));
442 	mutex_unlock(&priv->conf_mutex);
443 }
444 
p54_get_stats(struct ieee80211_hw * dev,struct ieee80211_low_level_stats * stats)445 static int p54_get_stats(struct ieee80211_hw *dev,
446 			 struct ieee80211_low_level_stats *stats)
447 {
448 	struct p54_common *priv = dev->priv;
449 
450 	memcpy(stats, &priv->stats, sizeof(*stats));
451 	return 0;
452 }
453 
p54_bss_info_changed(struct ieee80211_hw * dev,struct ieee80211_vif * vif,struct ieee80211_bss_conf * info,u32 changed)454 static void p54_bss_info_changed(struct ieee80211_hw *dev,
455 				 struct ieee80211_vif *vif,
456 				 struct ieee80211_bss_conf *info,
457 				 u32 changed)
458 {
459 	struct p54_common *priv = dev->priv;
460 
461 	mutex_lock(&priv->conf_mutex);
462 	if (changed & BSS_CHANGED_BSSID) {
463 		memcpy(priv->bssid, info->bssid, ETH_ALEN);
464 		p54_setup_mac(priv);
465 	}
466 
467 	if (changed & BSS_CHANGED_BEACON) {
468 		p54_scan(priv, P54_SCAN_EXIT, 0);
469 		p54_setup_mac(priv);
470 		p54_beacon_update(priv, vif);
471 		p54_set_edcf(priv);
472 	}
473 
474 	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
475 		priv->use_short_slot = info->use_short_slot;
476 		p54_set_edcf(priv);
477 	}
478 	if (changed & BSS_CHANGED_BASIC_RATES) {
479 		if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
480 			priv->basic_rate_mask = (info->basic_rates << 4);
481 		else
482 			priv->basic_rate_mask = info->basic_rates;
483 		p54_setup_mac(priv);
484 		if (priv->fw_var >= 0x500)
485 			p54_scan(priv, P54_SCAN_EXIT, 0);
486 	}
487 	if (changed & BSS_CHANGED_ASSOC) {
488 		if (info->assoc) {
489 			priv->aid = info->aid;
490 			priv->wakeup_timer = info->beacon_int *
491 					     info->dtim_period * 5;
492 			p54_setup_mac(priv);
493 		} else {
494 			priv->wakeup_timer = 500;
495 			priv->aid = 0;
496 		}
497 	}
498 
499 	mutex_unlock(&priv->conf_mutex);
500 }
501 
p54_set_key(struct ieee80211_hw * dev,enum set_key_cmd cmd,struct ieee80211_vif * vif,struct ieee80211_sta * sta,struct ieee80211_key_conf * key)502 static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
503 		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
504 		       struct ieee80211_key_conf *key)
505 {
506 	struct p54_common *priv = dev->priv;
507 	int slot, ret = 0;
508 	u8 algo = 0;
509 	u8 *addr = NULL;
510 
511 	if (modparam_nohwcrypt)
512 		return -EOPNOTSUPP;
513 
514 	mutex_lock(&priv->conf_mutex);
515 	if (cmd == SET_KEY) {
516 		switch (key->cipher) {
517 		case WLAN_CIPHER_SUITE_TKIP:
518 			if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
519 			      BR_DESC_PRIV_CAP_TKIP))) {
520 				ret = -EOPNOTSUPP;
521 				goto out_unlock;
522 			}
523 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
524 			algo = P54_CRYPTO_TKIPMICHAEL;
525 			break;
526 		case WLAN_CIPHER_SUITE_WEP40:
527 		case WLAN_CIPHER_SUITE_WEP104:
528 			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
529 				ret = -EOPNOTSUPP;
530 				goto out_unlock;
531 			}
532 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
533 			algo = P54_CRYPTO_WEP;
534 			break;
535 		case WLAN_CIPHER_SUITE_CCMP:
536 			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
537 				ret = -EOPNOTSUPP;
538 				goto out_unlock;
539 			}
540 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
541 			algo = P54_CRYPTO_AESCCMP;
542 			break;
543 		default:
544 			ret = -EOPNOTSUPP;
545 			goto out_unlock;
546 		}
547 		slot = bitmap_find_free_region(priv->used_rxkeys,
548 					       priv->rx_keycache_size, 0);
549 
550 		if (slot < 0) {
551 			/*
552 			 * The device supports the chosen algorithm, but the
553 			 * firmware does not provide enough key slots to store
554 			 * all of them.
555 			 * But encryption offload for outgoing frames is always
556 			 * possible, so we just pretend that the upload was
557 			 * successful and do the decryption in software.
558 			 */
559 
560 			/* mark the key as invalid. */
561 			key->hw_key_idx = 0xff;
562 			goto out_unlock;
563 		}
564 	} else {
565 		slot = key->hw_key_idx;
566 
567 		if (slot == 0xff) {
568 			/* This key was not uploaded into the rx key cache. */
569 
570 			goto out_unlock;
571 		}
572 
573 		bitmap_release_region(priv->used_rxkeys, slot, 0);
574 		algo = 0;
575 	}
576 
577 	if (sta)
578 		addr = sta->addr;
579 
580 	ret = p54_upload_key(priv, algo, slot, key->keyidx,
581 			     key->keylen, addr, key->key);
582 	if (ret) {
583 		bitmap_release_region(priv->used_rxkeys, slot, 0);
584 		ret = -EOPNOTSUPP;
585 		goto out_unlock;
586 	}
587 
588 	key->hw_key_idx = slot;
589 
590 out_unlock:
591 	mutex_unlock(&priv->conf_mutex);
592 	return ret;
593 }
594 
p54_get_survey(struct ieee80211_hw * dev,int idx,struct survey_info * survey)595 static int p54_get_survey(struct ieee80211_hw *dev, int idx,
596 				struct survey_info *survey)
597 {
598 	struct p54_common *priv = dev->priv;
599 	struct ieee80211_channel *chan;
600 	int err, tries;
601 	bool in_use = false;
602 
603 	if (idx >= priv->chan_num)
604 		return -ENOENT;
605 
606 #define MAX_TRIES 1
607 	for (tries = 0; tries < MAX_TRIES; tries++) {
608 		chan = priv->curchan;
609 		if (chan && chan->hw_value == idx) {
610 			mutex_lock(&priv->conf_mutex);
611 			err = p54_wait_for_stats(dev);
612 			mutex_unlock(&priv->conf_mutex);
613 			if (err)
614 				return err;
615 
616 			in_use = true;
617 		}
618 
619 		memcpy(survey, &priv->survey[idx], sizeof(*survey));
620 
621 		if (in_use) {
622 			/* test if the reported statistics are valid. */
623 			if  (survey->channel_time != 0) {
624 				survey->filled |= SURVEY_INFO_IN_USE;
625 			} else {
626 				/*
627 				 * hw/fw has not accumulated enough sample sets.
628 				 * Wait for 100ms, this ought to be enough to
629 				 * to get at least one non-null set of channel
630 				 * usage statistics.
631 				 */
632 				msleep(100);
633 				continue;
634 			}
635 		}
636 		return 0;
637 	}
638 	return -ETIMEDOUT;
639 #undef MAX_TRIES
640 }
641 
p54_flush_count(struct p54_common * priv)642 static unsigned int p54_flush_count(struct p54_common *priv)
643 {
644 	unsigned int total = 0, i;
645 
646 	BUILD_BUG_ON(P54_QUEUE_NUM > ARRAY_SIZE(priv->tx_stats));
647 
648 	/*
649 	 * Because the firmware has the sole control over any frames
650 	 * in the P54_QUEUE_BEACON or P54_QUEUE_SCAN queues, they
651 	 * don't really count as pending or active.
652 	 */
653 	for (i = P54_QUEUE_MGMT; i < P54_QUEUE_NUM; i++)
654 		total += priv->tx_stats[i].len;
655 	return total;
656 }
657 
p54_flush(struct ieee80211_hw * dev,bool drop)658 static void p54_flush(struct ieee80211_hw *dev, bool drop)
659 {
660 	struct p54_common *priv = dev->priv;
661 	unsigned int total, i;
662 
663 	/*
664 	 * Currently, it wouldn't really matter if we wait for one second
665 	 * or 15 minutes. But once someone gets around and completes the
666 	 * TODOs [ancel stuck frames / reset device] in p54_work, it will
667 	 * suddenly make sense to wait that long.
668 	 */
669 	i = P54_STATISTICS_UPDATE * 2 / 20;
670 
671 	/*
672 	 * In this case no locking is required because as we speak the
673 	 * queues have already been stopped and no new frames can sneak
674 	 * up from behind.
675 	 */
676 	while ((total = p54_flush_count(priv) && i--)) {
677 		/* waste time */
678 		msleep(20);
679 	}
680 
681 	WARN(total, "tx flush timeout, unresponsive firmware");
682 }
683 
p54_set_coverage_class(struct ieee80211_hw * dev,u8 coverage_class)684 static void p54_set_coverage_class(struct ieee80211_hw *dev, u8 coverage_class)
685 {
686 	struct p54_common *priv = dev->priv;
687 
688 	mutex_lock(&priv->conf_mutex);
689 	/* support all coverage class values as in 802.11-2007 Table 7-27 */
690 	priv->coverage_class = clamp_t(u8, coverage_class, 0, 31);
691 	p54_set_edcf(priv);
692 	mutex_unlock(&priv->conf_mutex);
693 }
694 
695 static const struct ieee80211_ops p54_ops = {
696 	.tx			= p54_tx_80211,
697 	.start			= p54_start,
698 	.stop			= p54_stop,
699 	.add_interface		= p54_add_interface,
700 	.remove_interface	= p54_remove_interface,
701 	.set_tim		= p54_set_tim,
702 	.sta_notify		= p54_sta_notify,
703 	.sta_add		= p54_sta_add_remove,
704 	.sta_remove		= p54_sta_add_remove,
705 	.set_key		= p54_set_key,
706 	.config			= p54_config,
707 	.flush			= p54_flush,
708 	.bss_info_changed	= p54_bss_info_changed,
709 	.prepare_multicast	= p54_prepare_multicast,
710 	.configure_filter	= p54_configure_filter,
711 	.conf_tx		= p54_conf_tx,
712 	.get_stats		= p54_get_stats,
713 	.get_survey		= p54_get_survey,
714 	.set_coverage_class	= p54_set_coverage_class,
715 };
716 
p54_init_common(size_t priv_data_len)717 struct ieee80211_hw *p54_init_common(size_t priv_data_len)
718 {
719 	struct ieee80211_hw *dev;
720 	struct p54_common *priv;
721 
722 	dev = ieee80211_alloc_hw(priv_data_len, &p54_ops);
723 	if (!dev)
724 		return NULL;
725 
726 	priv = dev->priv;
727 	priv->hw = dev;
728 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
729 	priv->basic_rate_mask = 0x15f;
730 	spin_lock_init(&priv->tx_stats_lock);
731 	skb_queue_head_init(&priv->tx_queue);
732 	skb_queue_head_init(&priv->tx_pending);
733 	dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
734 		     IEEE80211_HW_SIGNAL_DBM |
735 		     IEEE80211_HW_SUPPORTS_PS |
736 		     IEEE80211_HW_PS_NULLFUNC_STACK |
737 		     IEEE80211_HW_BEACON_FILTER |
738 		     IEEE80211_HW_REPORTS_TX_ACK_STATUS;
739 
740 	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
741 				      BIT(NL80211_IFTYPE_ADHOC) |
742 				      BIT(NL80211_IFTYPE_AP) |
743 				      BIT(NL80211_IFTYPE_MESH_POINT);
744 
745 	dev->channel_change_time = 1000;	/* TODO: find actual value */
746 	priv->beacon_req_id = cpu_to_le32(0);
747 	priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
748 	priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
749 	priv->tx_stats[P54_QUEUE_MGMT].limit = 3;
750 	priv->tx_stats[P54_QUEUE_CAB].limit = 3;
751 	priv->tx_stats[P54_QUEUE_DATA].limit = 5;
752 	dev->queues = 1;
753 	priv->noise = -94;
754 	/*
755 	 * We support at most 8 tries no matter which rate they're at,
756 	 * we cannot support max_rates * max_rate_tries as we set it
757 	 * here, but setting it correctly to 4/2 or so would limit us
758 	 * artificially if the RC algorithm wants just two rates, so
759 	 * let's say 4/7, we'll redistribute it at TX time, see the
760 	 * comments there.
761 	 */
762 	dev->max_rates = 4;
763 	dev->max_rate_tries = 7;
764 	dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 +
765 				 sizeof(struct p54_tx_data);
766 
767 	/*
768 	 * For now, disable PS by default because it affects
769 	 * link stability significantly.
770 	 */
771 	dev->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
772 
773 	mutex_init(&priv->conf_mutex);
774 	mutex_init(&priv->eeprom_mutex);
775 	init_completion(&priv->stat_comp);
776 	init_completion(&priv->eeprom_comp);
777 	init_completion(&priv->beacon_comp);
778 	INIT_DELAYED_WORK(&priv->work, p54_work);
779 
780 	memset(&priv->mc_maclist[0], ~0, ETH_ALEN);
781 	priv->curchan = NULL;
782 	p54_reset_stats(priv);
783 	return dev;
784 }
785 EXPORT_SYMBOL_GPL(p54_init_common);
786 
p54_register_common(struct ieee80211_hw * dev,struct device * pdev)787 int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
788 {
789 	struct p54_common __maybe_unused *priv = dev->priv;
790 	int err;
791 
792 	err = ieee80211_register_hw(dev);
793 	if (err) {
794 		dev_err(pdev, "Cannot register device (%d).\n", err);
795 		return err;
796 	}
797 
798 #ifdef CONFIG_P54_LEDS
799 	err = p54_init_leds(priv);
800 	if (err)
801 		return err;
802 #endif /* CONFIG_P54_LEDS */
803 
804 	dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
805 	return 0;
806 }
807 EXPORT_SYMBOL_GPL(p54_register_common);
808 
p54_free_common(struct ieee80211_hw * dev)809 void p54_free_common(struct ieee80211_hw *dev)
810 {
811 	struct p54_common *priv = dev->priv;
812 	unsigned int i;
813 
814 	for (i = 0; i < IEEE80211_NUM_BANDS; i++)
815 		kfree(priv->band_table[i]);
816 
817 	kfree(priv->iq_autocal);
818 	kfree(priv->output_limit);
819 	kfree(priv->curve_data);
820 	kfree(priv->rssi_db);
821 	kfree(priv->used_rxkeys);
822 	kfree(priv->survey);
823 	priv->iq_autocal = NULL;
824 	priv->output_limit = NULL;
825 	priv->curve_data = NULL;
826 	priv->rssi_db = NULL;
827 	priv->used_rxkeys = NULL;
828 	priv->survey = NULL;
829 	ieee80211_free_hw(dev);
830 }
831 EXPORT_SYMBOL_GPL(p54_free_common);
832 
p54_unregister_common(struct ieee80211_hw * dev)833 void p54_unregister_common(struct ieee80211_hw *dev)
834 {
835 	struct p54_common *priv = dev->priv;
836 
837 #ifdef CONFIG_P54_LEDS
838 	p54_unregister_leds(priv);
839 #endif /* CONFIG_P54_LEDS */
840 
841 	ieee80211_unregister_hw(dev);
842 	mutex_destroy(&priv->conf_mutex);
843 	mutex_destroy(&priv->eeprom_mutex);
844 }
845 EXPORT_SYMBOL_GPL(p54_unregister_common);
846