1 /* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */
2 /*
3 Written 1992-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency. This software may be used and
7 distributed according to the terms of the GNU General Public License,
8 incorporated herein by reference.
9
10 The author may be reached as becker@scyld.com, or C/O
11 Scyld Computing Corporation
12 410 Severn Ave., Suite 210
13 Annapolis MD 21403
14
15
16 This driver should work with the 3c503 and 3c503/16. It should be used
17 in shared memory mode for best performance, although it may also work
18 in programmed-I/O mode.
19
20 Sources:
21 EtherLink II Technical Reference Manual,
22 EtherLink II/16 Technical Reference Manual Supplement,
23 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145
24
25 The Crynwr 3c503 packet driver.
26
27 Changelog:
28
29 Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards.
30 Paul Gortmaker : multiple card support for module users.
31 rjohnson@analogic.com : Fix up PIO interface for efficient operation.
32 Jeff Garzik : ethtool support
33
34 */
35
36 #define DRV_NAME "3c503"
37 #define DRV_VERSION "1.10a"
38 #define DRV_RELDATE "11/17/2001"
39
40
41 static const char version[] =
42 DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n";
43
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/errno.h>
47 #include <linux/string.h>
48 #include <linux/delay.h>
49 #include <linux/netdevice.h>
50 #include <linux/etherdevice.h>
51 #include <linux/init.h>
52 #include <linux/interrupt.h>
53 #include <linux/ethtool.h>
54
55 #include <asm/uaccess.h>
56 #include <asm/io.h>
57 #include <asm/system.h>
58 #include <asm/byteorder.h>
59
60 #include "8390.h"
61 #include "3c503.h"
62 #define WRD_COUNT 4
63
64 static int el2_pio_probe(struct net_device *dev);
65 static int el2_probe1(struct net_device *dev, int ioaddr);
66
67 /* A zero-terminated list of I/O addresses to be probed in PIO mode. */
68 static unsigned int netcard_portlist[] __initdata =
69 { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0};
70
71 #define EL2_IO_EXTENT 16
72
73 static int el2_open(struct net_device *dev);
74 static int el2_close(struct net_device *dev);
75 static void el2_reset_8390(struct net_device *dev);
76 static void el2_init_card(struct net_device *dev);
77 static void el2_block_output(struct net_device *dev, int count,
78 const unsigned char *buf, int start_page);
79 static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb,
80 int ring_offset);
81 static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
82 int ring_page);
83 static const struct ethtool_ops netdev_ethtool_ops;
84
85
86 /* This routine probes for a memory-mapped 3c503 board by looking for
87 the "location register" at the end of the jumpered boot PROM space.
88 This works even if a PROM isn't there.
89
90 If the ethercard isn't found there is an optional probe for
91 ethercard jumpered to programmed-I/O mode.
92 */
do_el2_probe(struct net_device * dev)93 static int __init do_el2_probe(struct net_device *dev)
94 {
95 int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0};
96 int base_addr = dev->base_addr;
97 int irq = dev->irq;
98
99 if (base_addr > 0x1ff) /* Check a single specified location. */
100 return el2_probe1(dev, base_addr);
101 else if (base_addr != 0) /* Don't probe at all. */
102 return -ENXIO;
103
104 for (addr = addrs; *addr; addr++) {
105 void __iomem *p = ioremap(*addr, 1);
106 unsigned base_bits;
107 int i;
108
109 if (!p)
110 continue;
111 base_bits = readb(p);
112 iounmap(p);
113 i = ffs(base_bits) - 1;
114 if (i == -1 || base_bits != (1 << i))
115 continue;
116 if (el2_probe1(dev, netcard_portlist[i]) == 0)
117 return 0;
118 dev->irq = irq;
119 }
120 #if ! defined(no_probe_nonshared_memory)
121 return el2_pio_probe(dev);
122 #else
123 return -ENODEV;
124 #endif
125 }
126
127 /* Try all of the locations that aren't obviously empty. This touches
128 a lot of locations, and is much riskier than the code above. */
129 static int __init
el2_pio_probe(struct net_device * dev)130 el2_pio_probe(struct net_device *dev)
131 {
132 int i;
133 int base_addr = dev->base_addr;
134 int irq = dev->irq;
135
136 if (base_addr > 0x1ff) /* Check a single specified location. */
137 return el2_probe1(dev, base_addr);
138 else if (base_addr != 0) /* Don't probe at all. */
139 return -ENXIO;
140
141 for (i = 0; netcard_portlist[i]; i++) {
142 if (el2_probe1(dev, netcard_portlist[i]) == 0)
143 return 0;
144 dev->irq = irq;
145 }
146
147 return -ENODEV;
148 }
149
150 #ifndef MODULE
el2_probe(int unit)151 struct net_device * __init el2_probe(int unit)
152 {
153 struct net_device *dev = alloc_eip_netdev();
154 int err;
155
156 if (!dev)
157 return ERR_PTR(-ENOMEM);
158
159 sprintf(dev->name, "eth%d", unit);
160 netdev_boot_setup_check(dev);
161
162 err = do_el2_probe(dev);
163 if (err)
164 goto out;
165 return dev;
166 out:
167 free_netdev(dev);
168 return ERR_PTR(err);
169 }
170 #endif
171
172 static const struct net_device_ops el2_netdev_ops = {
173 .ndo_open = el2_open,
174 .ndo_stop = el2_close,
175
176 .ndo_start_xmit = eip_start_xmit,
177 .ndo_tx_timeout = eip_tx_timeout,
178 .ndo_get_stats = eip_get_stats,
179 .ndo_set_rx_mode = eip_set_multicast_list,
180 .ndo_validate_addr = eth_validate_addr,
181 .ndo_set_mac_address = eth_mac_addr,
182 .ndo_change_mtu = eth_change_mtu,
183 #ifdef CONFIG_NET_POLL_CONTROLLER
184 .ndo_poll_controller = eip_poll,
185 #endif
186 };
187
188 /* Probe for the Etherlink II card at I/O port base IOADDR,
189 returning non-zero on success. If found, set the station
190 address and memory parameters in DEVICE. */
191 static int __init
el2_probe1(struct net_device * dev,int ioaddr)192 el2_probe1(struct net_device *dev, int ioaddr)
193 {
194 int i, iobase_reg, membase_reg, saved_406, wordlength, retval;
195 static unsigned version_printed;
196 unsigned long vendor_id;
197
198 if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME))
199 return -EBUSY;
200
201 if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) {
202 retval = -EBUSY;
203 goto out;
204 }
205
206 /* Reset and/or avoid any lurking NE2000 */
207 if (inb(ioaddr + 0x408) == 0xff) {
208 mdelay(1);
209 retval = -ENODEV;
210 goto out1;
211 }
212
213 /* We verify that it's a 3C503 board by checking the first three octets
214 of its ethernet address. */
215 iobase_reg = inb(ioaddr+0x403);
216 membase_reg = inb(ioaddr+0x404);
217 /* ASIC location registers should be 0 or have only a single bit set. */
218 if ((iobase_reg & (iobase_reg - 1)) ||
219 (membase_reg & (membase_reg - 1))) {
220 retval = -ENODEV;
221 goto out1;
222 }
223 saved_406 = inb_p(ioaddr + 0x406);
224 outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */
225 outb_p(ECNTRL_THIN, ioaddr + 0x406);
226 /* Map the station addr PROM into the lower I/O ports. We now check
227 for both the old and new 3Com prefix */
228 outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406);
229 vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2);
230 if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) {
231 /* Restore the register we frobbed. */
232 outb(saved_406, ioaddr + 0x406);
233 retval = -ENODEV;
234 goto out1;
235 }
236
237 if (ei_debug && version_printed++ == 0)
238 pr_debug("%s", version);
239
240 dev->base_addr = ioaddr;
241
242 pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
243
244 /* Retrieve and print the ethernet address. */
245 for (i = 0; i < 6; i++)
246 dev->dev_addr[i] = inb(ioaddr + i);
247 pr_cont("%pM", dev->dev_addr);
248
249 /* Map the 8390 back into the window. */
250 outb(ECNTRL_THIN, ioaddr + 0x406);
251
252 /* Check for EL2/16 as described in tech. man. */
253 outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
254 outb_p(0, ioaddr + EN0_DCFG);
255 outb_p(E8390_PAGE2, ioaddr + E8390_CMD);
256 wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS;
257 outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
258
259 /* Probe for, turn on and clear the board's shared memory. */
260 if (ei_debug > 2)
261 pr_cont(" memory jumpers %2.2x ", membase_reg);
262 outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */
263
264 /* This should be probed for (or set via an ioctl()) at run-time.
265 Right now we use a sleazy hack to pass in the interface number
266 at boot-time via the low bits of the mem_end field. That value is
267 unused, and the low bits would be discarded even if it was used. */
268 #if defined(EI8390_THICK) || defined(EL2_AUI)
269 ei_status.interface_num = 1;
270 #else
271 ei_status.interface_num = dev->mem_end & 0xf;
272 #endif
273 pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
274
275 if ((membase_reg & 0xf0) == 0) {
276 dev->mem_start = 0;
277 ei_status.name = "3c503-PIO";
278 ei_status.mem = NULL;
279 } else {
280 dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) +
281 ((membase_reg & 0xA0) ? 0x4000 : 0);
282 #define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256
283 ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE);
284
285 #ifdef EL2MEMTEST
286 /* This has never found an error, but someone might care.
287 Note that it only tests the 2nd 8kB on 16kB 3c503/16
288 cards between card addr. 0x2000 and 0x3fff. */
289 { /* Check the card's memory. */
290 void __iomem *mem_base = ei_status.mem;
291 unsigned int test_val = 0xbbadf00d;
292 writel(0xba5eba5e, mem_base);
293 for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
294 writel(test_val, mem_base + i);
295 if (readl(mem_base) != 0xba5eba5e ||
296 readl(mem_base + i) != test_val) {
297 pr_warning("3c503: memory failure or memory address conflict.\n");
298 dev->mem_start = 0;
299 ei_status.name = "3c503-PIO";
300 iounmap(mem_base);
301 ei_status.mem = NULL;
302 break;
303 }
304 test_val += 0x55555555;
305 writel(0, mem_base + i);
306 }
307 }
308 #endif /* EL2MEMTEST */
309
310 if (dev->mem_start)
311 dev->mem_end = dev->mem_start + EL2_MEMSIZE;
312
313 if (wordlength) { /* No Tx pages to skip over to get to Rx */
314 ei_status.priv = 0;
315 ei_status.name = "3c503/16";
316 } else {
317 ei_status.priv = TX_PAGES * 256;
318 ei_status.name = "3c503";
319 }
320 }
321
322 /*
323 Divide up the memory on the card. This is the same regardless of
324 whether shared-mem or PIO is used. For 16 bit cards (16kB RAM),
325 we use the entire 8k of bank1 for an Rx ring. We only use 3k
326 of the bank0 for 2 full size Tx packet slots. For 8 bit cards,
327 (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining
328 5kB for an Rx ring. */
329
330 if (wordlength) {
331 ei_status.tx_start_page = EL2_MB0_START_PG;
332 ei_status.rx_start_page = EL2_MB1_START_PG;
333 } else {
334 ei_status.tx_start_page = EL2_MB1_START_PG;
335 ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
336 }
337
338 /* Finish setting the board's parameters. */
339 ei_status.stop_page = EL2_MB1_STOP_PG;
340 ei_status.word16 = wordlength;
341 ei_status.reset_8390 = el2_reset_8390;
342 ei_status.get_8390_hdr = el2_get_8390_hdr;
343 ei_status.block_input = el2_block_input;
344 ei_status.block_output = el2_block_output;
345
346 if (dev->irq == 2)
347 dev->irq = 9;
348 else if (dev->irq > 5 && dev->irq != 9) {
349 pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
350 dev->irq);
351 dev->irq = 0;
352 }
353
354 ei_status.saved_irq = dev->irq;
355
356 dev->netdev_ops = &el2_netdev_ops;
357 dev->ethtool_ops = &netdev_ethtool_ops;
358
359 retval = register_netdev(dev);
360 if (retval)
361 goto out1;
362
363 if (dev->mem_start)
364 pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
365 dev->name, ei_status.name, (wordlength+1)<<3,
366 dev->mem_start, dev->mem_end-1);
367
368 else
369 {
370 ei_status.tx_start_page = EL2_MB1_START_PG;
371 ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
372 pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
373 dev->name, ei_status.name, (wordlength+1)<<3);
374 }
375 release_region(ioaddr + 0x400, 8);
376 return 0;
377 out1:
378 release_region(ioaddr + 0x400, 8);
379 out:
380 release_region(ioaddr, EL2_IO_EXTENT);
381 return retval;
382 }
383
el2_probe_interrupt(int irq,void * seen)384 static irqreturn_t el2_probe_interrupt(int irq, void *seen)
385 {
386 *(bool *)seen = true;
387 return IRQ_HANDLED;
388 }
389
390 static int
el2_open(struct net_device * dev)391 el2_open(struct net_device *dev)
392 {
393 int retval;
394
395 if (dev->irq < 2) {
396 static const int irqlist[] = {5, 9, 3, 4, 0};
397 const int *irqp = irqlist;
398
399 outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
400 do {
401 bool seen;
402
403 retval = request_irq(*irqp, el2_probe_interrupt, 0,
404 dev->name, &seen);
405 if (retval == -EBUSY)
406 continue;
407 if (retval < 0)
408 goto err_disable;
409
410 /* Twinkle the interrupt, and check if it's seen. */
411 seen = false;
412 smp_wmb();
413 outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
414 outb_p(0x00, E33G_IDCFR);
415 msleep(1);
416 free_irq(*irqp, &seen);
417 if (!seen)
418 continue;
419
420 retval = request_irq(dev->irq = *irqp, eip_interrupt, 0,
421 dev->name, dev);
422 if (retval == -EBUSY)
423 continue;
424 if (retval < 0)
425 goto err_disable;
426 break;
427 } while (*++irqp);
428
429 if (*irqp == 0) {
430 err_disable:
431 outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
432 return -EAGAIN;
433 }
434 } else {
435 if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
436 return retval;
437 }
438 }
439
440 el2_init_card(dev);
441 eip_open(dev);
442 return 0;
443 }
444
445 static int
el2_close(struct net_device * dev)446 el2_close(struct net_device *dev)
447 {
448 free_irq(dev->irq, dev);
449 dev->irq = ei_status.saved_irq;
450 outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
451
452 eip_close(dev);
453 return 0;
454 }
455
456 /* This is called whenever we have a unrecoverable failure:
457 transmit timeout
458 Bad ring buffer packet header
459 */
460 static void
el2_reset_8390(struct net_device * dev)461 el2_reset_8390(struct net_device *dev)
462 {
463 if (ei_debug > 1) {
464 pr_debug("%s: Resetting the 3c503 board...", dev->name);
465 pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
466 E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
467 }
468 outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
469 ei_status.txing = 0;
470 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
471 el2_init_card(dev);
472 if (ei_debug > 1)
473 pr_cont("done\n");
474 }
475
476 /* Initialize the 3c503 GA registers after a reset. */
477 static void
el2_init_card(struct net_device * dev)478 el2_init_card(struct net_device *dev)
479 {
480 /* Unmap the station PROM and select the DIX or BNC connector. */
481 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
482
483 /* Set ASIC copy of rx's first and last+1 buffer pages */
484 /* These must be the same as in the 8390. */
485 outb(ei_status.rx_start_page, E33G_STARTPG);
486 outb(ei_status.stop_page, E33G_STOPPG);
487
488 /* Point the vector pointer registers somewhere ?harmless?. */
489 outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */
490 outb(0xff, E33G_VP1);
491 outb(0x00, E33G_VP0);
492 /* Turn off all interrupts until we're opened. */
493 outb_p(0x00, dev->base_addr + EN0_IMR);
494 /* Enable IRQs iff started. */
495 outb(EGACFR_NORM, E33G_GACFR);
496
497 /* Set the interrupt line. */
498 outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR);
499 outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */
500 outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */
501 outb_p(0x00, E33G_DMAAL);
502 return; /* We always succeed */
503 }
504
505 /*
506 * Either use the shared memory (if enabled on the board) or put the packet
507 * out through the ASIC FIFO.
508 */
509 static void
el2_block_output(struct net_device * dev,int count,const unsigned char * buf,int start_page)510 el2_block_output(struct net_device *dev, int count,
511 const unsigned char *buf, int start_page)
512 {
513 unsigned short int *wrd;
514 int boguscount; /* timeout counter */
515 unsigned short word; /* temporary for better machine code */
516 void __iomem *base = ei_status.mem;
517
518 if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */
519 outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR);
520 else
521 outb(EGACFR_NORM, E33G_GACFR);
522
523 if (base) { /* Shared memory transfer */
524 memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8),
525 buf, count);
526 outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */
527 return;
528 }
529
530 /*
531 * No shared memory, put the packet out the other way.
532 * Set up then start the internal memory transfer to Tx Start Page
533 */
534
535 word = (unsigned short)start_page;
536 outb(word&0xFF, E33G_DMAAH);
537 outb(word>>8, E33G_DMAAL);
538
539 outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT
540 | ECNTRL_START, E33G_CNTRL);
541
542 /*
543 * Here I am going to write data to the FIFO as quickly as possible.
544 * Note that E33G_FIFOH is defined incorrectly. It is really
545 * E33G_FIFOL, the lowest port address for both the byte and
546 * word write. Variable 'count' is NOT checked. Caller must supply a
547 * valid count. Note that I may write a harmless extra byte to the
548 * 8390 if the byte-count was not even.
549 */
550 wrd = (unsigned short int *) buf;
551 count = (count + 1) >> 1;
552 for(;;)
553 {
554 boguscount = 0x1000;
555 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
556 {
557 if(!boguscount--)
558 {
559 pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
560 el2_reset_8390(dev);
561 goto blocked;
562 }
563 }
564 if(count > WRD_COUNT)
565 {
566 outsw(E33G_FIFOH, wrd, WRD_COUNT);
567 wrd += WRD_COUNT;
568 count -= WRD_COUNT;
569 }
570 else
571 {
572 outsw(E33G_FIFOH, wrd, count);
573 break;
574 }
575 }
576 blocked:;
577 outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
578 }
579
580 /* Read the 4 byte, page aligned 8390 specific header. */
581 static void
el2_get_8390_hdr(struct net_device * dev,struct e8390_pkt_hdr * hdr,int ring_page)582 el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
583 {
584 int boguscount;
585 void __iomem *base = ei_status.mem;
586 unsigned short word;
587
588 if (base) { /* Use the shared memory. */
589 void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8);
590 memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
591 hdr->count = le16_to_cpu(hdr->count);
592 return;
593 }
594
595 /*
596 * No shared memory, use programmed I/O.
597 */
598
599 word = (unsigned short)ring_page;
600 outb(word&0xFF, E33G_DMAAH);
601 outb(word>>8, E33G_DMAAL);
602
603 outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
604 | ECNTRL_START, E33G_CNTRL);
605 boguscount = 0x1000;
606 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
607 {
608 if(!boguscount--)
609 {
610 pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
611 memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
612 el2_reset_8390(dev);
613 goto blocked;
614 }
615 }
616 insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1);
617 blocked:;
618 outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
619 }
620
621
622 static void
el2_block_input(struct net_device * dev,int count,struct sk_buff * skb,int ring_offset)623 el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
624 {
625 int boguscount = 0;
626 void __iomem *base = ei_status.mem;
627 unsigned short int *buf;
628 unsigned short word;
629
630 /* Maybe enable shared memory just be to be safe... nahh.*/
631 if (base) { /* Use the shared memory. */
632 ring_offset -= (EL2_MB1_START_PG<<8);
633 if (ring_offset + count > EL2_MEMSIZE) {
634 /* We must wrap the input move. */
635 int semi_count = EL2_MEMSIZE - ring_offset;
636 memcpy_fromio(skb->data, base + ring_offset, semi_count);
637 count -= semi_count;
638 memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count);
639 } else {
640 memcpy_fromio(skb->data, base + ring_offset, count);
641 }
642 return;
643 }
644
645 /*
646 * No shared memory, use programmed I/O.
647 */
648 word = (unsigned short) ring_offset;
649 outb(word>>8, E33G_DMAAH);
650 outb(word&0xFF, E33G_DMAAL);
651
652 outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
653 | ECNTRL_START, E33G_CNTRL);
654
655 /*
656 * Here I also try to get data as fast as possible. I am betting that I
657 * can read one extra byte without clobbering anything in the kernel because
658 * this would only occur on an odd byte-count and allocation of skb->data
659 * is word-aligned. Variable 'count' is NOT checked. Caller must check
660 * for a valid count.
661 * [This is currently quite safe.... but if one day the 3c503 explodes
662 * you know where to come looking ;)]
663 */
664
665 buf = (unsigned short int *) skb->data;
666 count = (count + 1) >> 1;
667 for(;;)
668 {
669 boguscount = 0x1000;
670 while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
671 {
672 if(!boguscount--)
673 {
674 pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
675 el2_reset_8390(dev);
676 goto blocked;
677 }
678 }
679 if(count > WRD_COUNT)
680 {
681 insw(E33G_FIFOH, buf, WRD_COUNT);
682 buf += WRD_COUNT;
683 count -= WRD_COUNT;
684 }
685 else
686 {
687 insw(E33G_FIFOH, buf, count);
688 break;
689 }
690 }
691 blocked:;
692 outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
693 }
694
695
netdev_get_drvinfo(struct net_device * dev,struct ethtool_drvinfo * info)696 static void netdev_get_drvinfo(struct net_device *dev,
697 struct ethtool_drvinfo *info)
698 {
699 strcpy(info->driver, DRV_NAME);
700 strcpy(info->version, DRV_VERSION);
701 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
702 }
703
704 static const struct ethtool_ops netdev_ethtool_ops = {
705 .get_drvinfo = netdev_get_drvinfo,
706 };
707
708 #ifdef MODULE
709 #define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */
710
711 static struct net_device *dev_el2[MAX_EL2_CARDS];
712 static int io[MAX_EL2_CARDS];
713 static int irq[MAX_EL2_CARDS];
714 static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */
715 module_param_array(io, int, NULL, 0);
716 module_param_array(irq, int, NULL, 0);
717 module_param_array(xcvr, int, NULL, 0);
718 MODULE_PARM_DESC(io, "I/O base address(es)");
719 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
720 MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
721 MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver");
722 MODULE_LICENSE("GPL");
723
724 /* This is set up so that only a single autoprobe takes place per call.
725 ISA device autoprobes on a running machine are not recommended. */
726 int __init
init_module(void)727 init_module(void)
728 {
729 struct net_device *dev;
730 int this_dev, found = 0;
731
732 for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
733 if (io[this_dev] == 0) {
734 if (this_dev != 0) break; /* only autoprobe 1st one */
735 pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
736 }
737 dev = alloc_eip_netdev();
738 if (!dev)
739 break;
740 dev->irq = irq[this_dev];
741 dev->base_addr = io[this_dev];
742 dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
743 if (do_el2_probe(dev) == 0) {
744 dev_el2[found++] = dev;
745 continue;
746 }
747 free_netdev(dev);
748 pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
749 break;
750 }
751 if (found)
752 return 0;
753 return -ENXIO;
754 }
755
cleanup_card(struct net_device * dev)756 static void cleanup_card(struct net_device *dev)
757 {
758 /* NB: el2_close() handles free_irq */
759 release_region(dev->base_addr, EL2_IO_EXTENT);
760 if (ei_status.mem)
761 iounmap(ei_status.mem);
762 }
763
764 void __exit
cleanup_module(void)765 cleanup_module(void)
766 {
767 int this_dev;
768
769 for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
770 struct net_device *dev = dev_el2[this_dev];
771 if (dev) {
772 unregister_netdev(dev);
773 cleanup_card(dev);
774 free_netdev(dev);
775 }
776 }
777 }
778 #endif /* MODULE */
779