1 /*
2 * drivers/mtd/nand/h1910.c
3 *
4 * Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com)
5 *
6 * Derived from drivers/mtd/nand/edb7312.c
7 * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
8 * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 * Overview:
15 * This is a device driver for the NAND flash device found on the
16 * iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is
17 * a 128Mibit (16MiB x 8 bits) NAND flash device.
18 */
19
20 #include <linux/slab.h>
21 #include <linux/init.h>
22 #include <linux/module.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/nand.h>
25 #include <linux/mtd/partitions.h>
26 #include <asm/io.h>
27 #include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
28 #include <asm/sizes.h>
29 #include <mach/h1900-gpio.h>
30 #include <mach/ipaq.h>
31
32 /*
33 * MTD structure for EDB7312 board
34 */
35 static struct mtd_info *h1910_nand_mtd = NULL;
36
37 /*
38 * Module stuff
39 */
40
41 /*
42 * Define static partitions for flash device
43 */
44 static struct mtd_partition partition_info[] = {
45 {name:"h1910 NAND Flash",
46 offset:0,
47 size:16 * 1024 * 1024}
48 };
49
50 #define NUM_PARTITIONS 1
51
52 /*
53 * hardware specific access to control-lines
54 *
55 * NAND_NCE: bit 0 - don't care
56 * NAND_CLE: bit 1 - address bit 2
57 * NAND_ALE: bit 2 - address bit 3
58 */
h1910_hwcontrol(struct mtd_info * mtd,int cmd,unsigned int ctrl)59 static void h1910_hwcontrol(struct mtd_info *mtd, int cmd,
60 unsigned int ctrl)
61 {
62 struct nand_chip *chip = mtd->priv;
63
64 if (cmd != NAND_CMD_NONE)
65 writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1));
66 }
67
68 /*
69 * read device ready pin
70 */
71 #if 0
72 static int h1910_device_ready(struct mtd_info *mtd)
73 {
74 return (GPLR(55) & GPIO_bit(55));
75 }
76 #endif
77
78 /*
79 * Main initialization routine
80 */
h1910_init(void)81 static int __init h1910_init(void)
82 {
83 struct nand_chip *this;
84 void __iomem *nandaddr;
85
86 if (!machine_is_h1900())
87 return -ENODEV;
88
89 nandaddr = ioremap(0x08000000, 0x1000);
90 if (!nandaddr) {
91 printk("Failed to ioremap nand flash.\n");
92 return -ENOMEM;
93 }
94
95 /* Allocate memory for MTD device structure and private data */
96 h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
97 if (!h1910_nand_mtd) {
98 printk("Unable to allocate h1910 NAND MTD device structure.\n");
99 iounmap((void *)nandaddr);
100 return -ENOMEM;
101 }
102
103 /* Get pointer to private data */
104 this = (struct nand_chip *)(&h1910_nand_mtd[1]);
105
106 /* Initialize structures */
107 memset(h1910_nand_mtd, 0, sizeof(struct mtd_info));
108 memset(this, 0, sizeof(struct nand_chip));
109
110 /* Link the private data with the MTD structure */
111 h1910_nand_mtd->priv = this;
112 h1910_nand_mtd->owner = THIS_MODULE;
113
114 /*
115 * Enable VPEN
116 */
117 GPSR(37) = GPIO_bit(37);
118
119 /* insert callbacks */
120 this->IO_ADDR_R = nandaddr;
121 this->IO_ADDR_W = nandaddr;
122 this->cmd_ctrl = h1910_hwcontrol;
123 this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */
124 /* 15 us command delay time */
125 this->chip_delay = 50;
126 this->ecc.mode = NAND_ECC_SOFT;
127 this->options = NAND_NO_AUTOINCR;
128
129 /* Scan to find existence of the device */
130 if (nand_scan(h1910_nand_mtd, 1)) {
131 printk(KERN_NOTICE "No NAND device - returning -ENXIO\n");
132 kfree(h1910_nand_mtd);
133 iounmap((void *)nandaddr);
134 return -ENXIO;
135 }
136
137 /* Register the partitions */
138 mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
139 partition_info, NUM_PARTITIONS);
140
141 /* Return happy */
142 return 0;
143 }
144
145 module_init(h1910_init);
146
147 /*
148 * Clean up routine
149 */
h1910_cleanup(void)150 static void __exit h1910_cleanup(void)
151 {
152 struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1];
153
154 /* Release resources, unregister device */
155 nand_release(h1910_nand_mtd);
156
157 /* Release io resource */
158 iounmap((void *)this->IO_ADDR_W);
159
160 /* Free the MTD device structure */
161 kfree(h1910_nand_mtd);
162 }
163
164 module_exit(h1910_cleanup);
165
166 MODULE_LICENSE("GPL");
167 MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>");
168 MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910");
169