1 /*
2 * Driver for the Conexant CX23885 PCIe bridge
3 *
4 * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 *
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
25 #include <linux/fs.h>
26 #include <linux/kthread.h>
27 #include <linux/file.h>
28 #include <linux/suspend.h>
29
30 #include "cx23885.h"
31 #include <media/v4l2-common.h>
32
33 #include "dvb_ca_en50221.h"
34 #include "s5h1409.h"
35 #include "s5h1411.h"
36 #include "mt2131.h"
37 #include "tda8290.h"
38 #include "tda18271.h"
39 #include "lgdt330x.h"
40 #include "xc4000.h"
41 #include "xc5000.h"
42 #include "max2165.h"
43 #include "tda10048.h"
44 #include "tuner-xc2028.h"
45 #include "tuner-simple.h"
46 #include "dib7000p.h"
47 #include "dibx000_common.h"
48 #include "zl10353.h"
49 #include "stv0900.h"
50 #include "stv0900_reg.h"
51 #include "stv6110.h"
52 #include "lnbh24.h"
53 #include "cx24116.h"
54 #include "cimax2.h"
55 #include "lgs8gxx.h"
56 #include "netup-eeprom.h"
57 #include "netup-init.h"
58 #include "lgdt3305.h"
59 #include "atbm8830.h"
60 #include "ds3000.h"
61 #include "cx23885-f300.h"
62 #include "altera-ci.h"
63 #include "stv0367.h"
64 #include "drxk.h"
65 #include "mt2063.h"
66
67 static unsigned int debug;
68
69 #define dprintk(level, fmt, arg...)\
70 do { if (debug >= level)\
71 printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
72 } while (0)
73
74 /* ------------------------------------------------------------------ */
75
76 static unsigned int alt_tuner;
77 module_param(alt_tuner, int, 0644);
78 MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
79
80 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
81
82 /* ------------------------------------------------------------------ */
83
dvb_buf_setup(struct videobuf_queue * q,unsigned int * count,unsigned int * size)84 static int dvb_buf_setup(struct videobuf_queue *q,
85 unsigned int *count, unsigned int *size)
86 {
87 struct cx23885_tsport *port = q->priv_data;
88
89 port->ts_packet_size = 188 * 4;
90 port->ts_packet_count = 32;
91
92 *size = port->ts_packet_size * port->ts_packet_count;
93 *count = 32;
94 return 0;
95 }
96
dvb_buf_prepare(struct videobuf_queue * q,struct videobuf_buffer * vb,enum v4l2_field field)97 static int dvb_buf_prepare(struct videobuf_queue *q,
98 struct videobuf_buffer *vb, enum v4l2_field field)
99 {
100 struct cx23885_tsport *port = q->priv_data;
101 return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
102 }
103
dvb_buf_queue(struct videobuf_queue * q,struct videobuf_buffer * vb)104 static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
105 {
106 struct cx23885_tsport *port = q->priv_data;
107 cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
108 }
109
dvb_buf_release(struct videobuf_queue * q,struct videobuf_buffer * vb)110 static void dvb_buf_release(struct videobuf_queue *q,
111 struct videobuf_buffer *vb)
112 {
113 cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
114 }
115
116 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe);
117
cx23885_dvb_gate_ctrl(struct cx23885_tsport * port,int open)118 static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open)
119 {
120 struct videobuf_dvb_frontends *f;
121 struct videobuf_dvb_frontend *fe;
122
123 f = &port->frontends;
124
125 if (f->gate <= 1) /* undefined or fe0 */
126 fe = videobuf_dvb_get_frontend(f, 1);
127 else
128 fe = videobuf_dvb_get_frontend(f, f->gate);
129
130 if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
131 fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
132
133 /*
134 * FIXME: Improve this path to avoid calling the
135 * cx23885_dvb_set_frontend() every time it passes here.
136 */
137 cx23885_dvb_set_frontend(fe->dvb.frontend);
138 }
139
140 static struct videobuf_queue_ops dvb_qops = {
141 .buf_setup = dvb_buf_setup,
142 .buf_prepare = dvb_buf_prepare,
143 .buf_queue = dvb_buf_queue,
144 .buf_release = dvb_buf_release,
145 };
146
147 static struct s5h1409_config hauppauge_generic_config = {
148 .demod_address = 0x32 >> 1,
149 .output_mode = S5H1409_SERIAL_OUTPUT,
150 .gpio = S5H1409_GPIO_ON,
151 .qam_if = 44000,
152 .inversion = S5H1409_INVERSION_OFF,
153 .status_mode = S5H1409_DEMODLOCKING,
154 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
155 };
156
157 static struct tda10048_config hauppauge_hvr1200_config = {
158 .demod_address = 0x10 >> 1,
159 .output_mode = TDA10048_SERIAL_OUTPUT,
160 .fwbulkwritelen = TDA10048_BULKWRITE_200,
161 .inversion = TDA10048_INVERSION_ON,
162 .dtv6_if_freq_khz = TDA10048_IF_3300,
163 .dtv7_if_freq_khz = TDA10048_IF_3800,
164 .dtv8_if_freq_khz = TDA10048_IF_4300,
165 .clk_freq_khz = TDA10048_CLK_16000,
166 };
167
168 static struct tda10048_config hauppauge_hvr1210_config = {
169 .demod_address = 0x10 >> 1,
170 .output_mode = TDA10048_SERIAL_OUTPUT,
171 .fwbulkwritelen = TDA10048_BULKWRITE_200,
172 .inversion = TDA10048_INVERSION_ON,
173 .dtv6_if_freq_khz = TDA10048_IF_3300,
174 .dtv7_if_freq_khz = TDA10048_IF_3500,
175 .dtv8_if_freq_khz = TDA10048_IF_4000,
176 .clk_freq_khz = TDA10048_CLK_16000,
177 };
178
179 static struct s5h1409_config hauppauge_ezqam_config = {
180 .demod_address = 0x32 >> 1,
181 .output_mode = S5H1409_SERIAL_OUTPUT,
182 .gpio = S5H1409_GPIO_OFF,
183 .qam_if = 4000,
184 .inversion = S5H1409_INVERSION_ON,
185 .status_mode = S5H1409_DEMODLOCKING,
186 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
187 };
188
189 static struct s5h1409_config hauppauge_hvr1800lp_config = {
190 .demod_address = 0x32 >> 1,
191 .output_mode = S5H1409_SERIAL_OUTPUT,
192 .gpio = S5H1409_GPIO_OFF,
193 .qam_if = 44000,
194 .inversion = S5H1409_INVERSION_OFF,
195 .status_mode = S5H1409_DEMODLOCKING,
196 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
197 };
198
199 static struct s5h1409_config hauppauge_hvr1500_config = {
200 .demod_address = 0x32 >> 1,
201 .output_mode = S5H1409_SERIAL_OUTPUT,
202 .gpio = S5H1409_GPIO_OFF,
203 .inversion = S5H1409_INVERSION_OFF,
204 .status_mode = S5H1409_DEMODLOCKING,
205 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
206 };
207
208 static struct mt2131_config hauppauge_generic_tunerconfig = {
209 0x61
210 };
211
212 static struct lgdt330x_config fusionhdtv_5_express = {
213 .demod_address = 0x0e,
214 .demod_chip = LGDT3303,
215 .serial_mpeg = 0x40,
216 };
217
218 static struct s5h1409_config hauppauge_hvr1500q_config = {
219 .demod_address = 0x32 >> 1,
220 .output_mode = S5H1409_SERIAL_OUTPUT,
221 .gpio = S5H1409_GPIO_ON,
222 .qam_if = 44000,
223 .inversion = S5H1409_INVERSION_OFF,
224 .status_mode = S5H1409_DEMODLOCKING,
225 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
226 };
227
228 static struct s5h1409_config dvico_s5h1409_config = {
229 .demod_address = 0x32 >> 1,
230 .output_mode = S5H1409_SERIAL_OUTPUT,
231 .gpio = S5H1409_GPIO_ON,
232 .qam_if = 44000,
233 .inversion = S5H1409_INVERSION_OFF,
234 .status_mode = S5H1409_DEMODLOCKING,
235 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
236 };
237
238 static struct s5h1411_config dvico_s5h1411_config = {
239 .output_mode = S5H1411_SERIAL_OUTPUT,
240 .gpio = S5H1411_GPIO_ON,
241 .qam_if = S5H1411_IF_44000,
242 .vsb_if = S5H1411_IF_44000,
243 .inversion = S5H1411_INVERSION_OFF,
244 .status_mode = S5H1411_DEMODLOCKING,
245 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
246 };
247
248 static struct s5h1411_config hcw_s5h1411_config = {
249 .output_mode = S5H1411_SERIAL_OUTPUT,
250 .gpio = S5H1411_GPIO_OFF,
251 .vsb_if = S5H1411_IF_44000,
252 .qam_if = S5H1411_IF_4000,
253 .inversion = S5H1411_INVERSION_ON,
254 .status_mode = S5H1411_DEMODLOCKING,
255 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
256 };
257
258 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
259 .i2c_address = 0x61,
260 .if_khz = 5380,
261 };
262
263 static struct xc5000_config dvico_xc5000_tunerconfig = {
264 .i2c_address = 0x64,
265 .if_khz = 5380,
266 };
267
268 static struct tda829x_config tda829x_no_probe = {
269 .probe_tuner = TDA829X_DONT_PROBE,
270 };
271
272 static struct tda18271_std_map hauppauge_tda18271_std_map = {
273 .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
274 .if_lvl = 6, .rfagc_top = 0x37 },
275 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
276 .if_lvl = 6, .rfagc_top = 0x37 },
277 };
278
279 static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
280 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
281 .if_lvl = 1, .rfagc_top = 0x37, },
282 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
283 .if_lvl = 1, .rfagc_top = 0x37, },
284 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
285 .if_lvl = 1, .rfagc_top = 0x37, },
286 };
287
288 static struct tda18271_config hauppauge_tda18271_config = {
289 .std_map = &hauppauge_tda18271_std_map,
290 .gate = TDA18271_GATE_ANALOG,
291 .output_opt = TDA18271_OUTPUT_LT_OFF,
292 };
293
294 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
295 .std_map = &hauppauge_hvr1200_tda18271_std_map,
296 .gate = TDA18271_GATE_ANALOG,
297 .output_opt = TDA18271_OUTPUT_LT_OFF,
298 };
299
300 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
301 .gate = TDA18271_GATE_DIGITAL,
302 .output_opt = TDA18271_OUTPUT_LT_OFF,
303 };
304
305 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
306 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
307 .if_lvl = 1, .rfagc_top = 0x58 },
308 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
309 .if_lvl = 1, .rfagc_top = 0x58 },
310 };
311
312 static struct tda18271_config hauppauge_hvr127x_config = {
313 .std_map = &hauppauge_hvr127x_std_map,
314 .output_opt = TDA18271_OUTPUT_LT_OFF,
315 };
316
317 static struct lgdt3305_config hauppauge_lgdt3305_config = {
318 .i2c_addr = 0x0e,
319 .mpeg_mode = LGDT3305_MPEG_SERIAL,
320 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
321 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
322 .deny_i2c_rptr = 1,
323 .spectral_inversion = 1,
324 .qam_if_khz = 4000,
325 .vsb_if_khz = 3250,
326 };
327
328 static struct dibx000_agc_config xc3028_agc_config = {
329 BAND_VHF | BAND_UHF, /* band_caps */
330
331 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
332 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
333 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
334 * P_agc_nb_est=2, P_agc_write=0
335 */
336 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
337 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
338
339 712, /* inv_gain */
340 21, /* time_stabiliz */
341
342 0, /* alpha_level */
343 118, /* thlock */
344
345 0, /* wbd_inv */
346 2867, /* wbd_ref */
347 0, /* wbd_sel */
348 2, /* wbd_alpha */
349
350 0, /* agc1_max */
351 0, /* agc1_min */
352 39718, /* agc2_max */
353 9930, /* agc2_min */
354 0, /* agc1_pt1 */
355 0, /* agc1_pt2 */
356 0, /* agc1_pt3 */
357 0, /* agc1_slope1 */
358 0, /* agc1_slope2 */
359 0, /* agc2_pt1 */
360 128, /* agc2_pt2 */
361 29, /* agc2_slope1 */
362 29, /* agc2_slope2 */
363
364 17, /* alpha_mant */
365 27, /* alpha_exp */
366 23, /* beta_mant */
367 51, /* beta_exp */
368
369 1, /* perform_agc_softsplit */
370 };
371
372 /* PLL Configuration for COFDM BW_MHz = 8.000000
373 * With external clock = 30.000000 */
374 static struct dibx000_bandwidth_config xc3028_bw_config = {
375 60000, /* internal */
376 30000, /* sampling */
377 1, /* pll_cfg: prediv */
378 8, /* pll_cfg: ratio */
379 3, /* pll_cfg: range */
380 1, /* pll_cfg: reset */
381 0, /* pll_cfg: bypass */
382 0, /* misc: refdiv */
383 0, /* misc: bypclk_div */
384 1, /* misc: IO_CLK_en_core */
385 1, /* misc: ADClkSrc */
386 0, /* misc: modulo */
387 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
388 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
389 20452225, /* timf */
390 30000000 /* xtal_hz */
391 };
392
393 static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
394 .output_mpeg2_in_188_bytes = 1,
395 .hostbus_diversity = 1,
396 .tuner_is_baseband = 0,
397 .update_lna = NULL,
398
399 .agc_config_count = 1,
400 .agc = &xc3028_agc_config,
401 .bw = &xc3028_bw_config,
402
403 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
404 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
405 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
406
407 .pwm_freq_div = 0,
408 .agc_control = NULL,
409 .spur_protect = 0,
410
411 .output_mode = OUTMODE_MPEG2_SERIAL,
412 };
413
414 static struct zl10353_config dvico_fusionhdtv_xc3028 = {
415 .demod_address = 0x0f,
416 .if2 = 45600,
417 .no_tuner = 1,
418 .disable_i2c_gate_ctrl = 1,
419 };
420
421 static struct stv0900_reg stv0900_ts_regs[] = {
422 { R0900_TSGENERAL, 0x00 },
423 { R0900_P1_TSSPEED, 0x40 },
424 { R0900_P2_TSSPEED, 0x40 },
425 { R0900_P1_TSCFGM, 0xc0 },
426 { R0900_P2_TSCFGM, 0xc0 },
427 { R0900_P1_TSCFGH, 0xe0 },
428 { R0900_P2_TSCFGH, 0xe0 },
429 { R0900_P1_TSCFGL, 0x20 },
430 { R0900_P2_TSCFGL, 0x20 },
431 { 0xffff, 0xff }, /* terminate */
432 };
433
434 static struct stv0900_config netup_stv0900_config = {
435 .demod_address = 0x68,
436 .demod_mode = 1, /* dual */
437 .xtal = 8000000,
438 .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
439 .diseqc_mode = 2,/* 2/3 PWM */
440 .ts_config_regs = stv0900_ts_regs,
441 .tun1_maddress = 0,/* 0x60 */
442 .tun2_maddress = 3,/* 0x63 */
443 .tun1_adc = 1,/* 1 Vpp */
444 .tun2_adc = 1,/* 1 Vpp */
445 };
446
447 static struct stv6110_config netup_stv6110_tunerconfig_a = {
448 .i2c_address = 0x60,
449 .mclk = 16000000,
450 .clk_div = 1,
451 .gain = 8, /* +16 dB - maximum gain */
452 };
453
454 static struct stv6110_config netup_stv6110_tunerconfig_b = {
455 .i2c_address = 0x63,
456 .mclk = 16000000,
457 .clk_div = 1,
458 .gain = 8, /* +16 dB - maximum gain */
459 };
460
461 static struct cx24116_config tbs_cx24116_config = {
462 .demod_address = 0x55,
463 };
464
465 static struct ds3000_config tevii_ds3000_config = {
466 .demod_address = 0x68,
467 };
468
469 static struct cx24116_config dvbworld_cx24116_config = {
470 .demod_address = 0x05,
471 };
472
473 static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
474 .prod = LGS8GXX_PROD_LGS8GL5,
475 .demod_address = 0x19,
476 .serial_ts = 0,
477 .ts_clk_pol = 1,
478 .ts_clk_gated = 1,
479 .if_clk_freq = 30400, /* 30.4 MHz */
480 .if_freq = 5380, /* 5.38 MHz */
481 .if_neg_center = 1,
482 .ext_adc = 0,
483 .adc_signed = 0,
484 .if_neg_edge = 0,
485 };
486
487 static struct xc5000_config mygica_x8506_xc5000_config = {
488 .i2c_address = 0x61,
489 .if_khz = 5380,
490 };
491
cx23885_dvb_set_frontend(struct dvb_frontend * fe)492 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
493 {
494 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
495 struct cx23885_tsport *port = fe->dvb->priv;
496 struct cx23885_dev *dev = port->dev;
497
498 switch (dev->board) {
499 case CX23885_BOARD_HAUPPAUGE_HVR1275:
500 switch (p->modulation) {
501 case VSB_8:
502 cx23885_gpio_clear(dev, GPIO_5);
503 break;
504 case QAM_64:
505 case QAM_256:
506 default:
507 cx23885_gpio_set(dev, GPIO_5);
508 break;
509 }
510 break;
511 case CX23885_BOARD_MYGICA_X8506:
512 case CX23885_BOARD_MAGICPRO_PROHDTVE2:
513 /* Select Digital TV */
514 cx23885_gpio_set(dev, GPIO_0);
515 break;
516 }
517 return 0;
518 }
519
520 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
521 .prod = LGS8GXX_PROD_LGS8G75,
522 .demod_address = 0x19,
523 .serial_ts = 0,
524 .ts_clk_pol = 1,
525 .ts_clk_gated = 1,
526 .if_clk_freq = 30400, /* 30.4 MHz */
527 .if_freq = 6500, /* 6.50 MHz */
528 .if_neg_center = 1,
529 .ext_adc = 0,
530 .adc_signed = 1,
531 .adc_vpp = 2, /* 1.6 Vpp */
532 .if_neg_edge = 1,
533 };
534
535 static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
536 .i2c_address = 0x61,
537 .if_khz = 6500,
538 };
539
540 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
541 .prod = ATBM8830_PROD_8830,
542 .demod_address = 0x44,
543 .serial_ts = 0,
544 .ts_sampling_edge = 1,
545 .ts_clk_gated = 0,
546 .osc_clk_freq = 30400, /* in kHz */
547 .if_freq = 0, /* zero IF */
548 .zif_swap_iq = 1,
549 .agc_min = 0x2E,
550 .agc_max = 0xFF,
551 .agc_hold_loop = 0,
552 };
553
554 static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
555 .i2c_address = 0x60,
556 .osc_clk = 20
557 };
558
559 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
560 .prod = ATBM8830_PROD_8830,
561 .demod_address = 0x44,
562 .serial_ts = 1,
563 .ts_sampling_edge = 1,
564 .ts_clk_gated = 0,
565 .osc_clk_freq = 30400, /* in kHz */
566 .if_freq = 0, /* zero IF */
567 .zif_swap_iq = 1,
568 .agc_min = 0x2E,
569 .agc_max = 0xFF,
570 .agc_hold_loop = 0,
571 };
572
573 static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
574 .i2c_address = 0x60,
575 .osc_clk = 20
576 };
577 static struct stv0367_config netup_stv0367_config[] = {
578 {
579 .demod_address = 0x1c,
580 .xtal = 27000000,
581 .if_khz = 4500,
582 .if_iq_mode = 0,
583 .ts_mode = 1,
584 .clk_pol = 0,
585 }, {
586 .demod_address = 0x1d,
587 .xtal = 27000000,
588 .if_khz = 4500,
589 .if_iq_mode = 0,
590 .ts_mode = 1,
591 .clk_pol = 0,
592 },
593 };
594
595 static struct xc5000_config netup_xc5000_config[] = {
596 {
597 .i2c_address = 0x61,
598 .if_khz = 4500,
599 }, {
600 .i2c_address = 0x64,
601 .if_khz = 4500,
602 },
603 };
604
605 static struct drxk_config terratec_drxk_config[] = {
606 {
607 .adr = 0x29,
608 .no_i2c_bridge = 1,
609 }, {
610 .adr = 0x2a,
611 .no_i2c_bridge = 1,
612 },
613 };
614
615 static struct mt2063_config terratec_mt2063_config[] = {
616 {
617 .tuner_address = 0x60,
618 }, {
619 .tuner_address = 0x67,
620 },
621 };
622
netup_altera_fpga_rw(void * device,int flag,int data,int read)623 int netup_altera_fpga_rw(void *device, int flag, int data, int read)
624 {
625 struct cx23885_dev *dev = (struct cx23885_dev *)device;
626 unsigned long timeout = jiffies + msecs_to_jiffies(1);
627 uint32_t mem = 0;
628
629 mem = cx_read(MC417_RWD);
630 if (read)
631 cx_set(MC417_OEN, ALT_DATA);
632 else {
633 cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
634 mem &= ~ALT_DATA;
635 mem |= (data & ALT_DATA);
636 }
637
638 if (flag)
639 mem |= ALT_AD_RG;
640 else
641 mem &= ~ALT_AD_RG;
642
643 mem &= ~ALT_CS;
644 if (read)
645 mem = (mem & ~ALT_RD) | ALT_WR;
646 else
647 mem = (mem & ~ALT_WR) | ALT_RD;
648
649 cx_write(MC417_RWD, mem); /* start RW cycle */
650
651 for (;;) {
652 mem = cx_read(MC417_RWD);
653 if ((mem & ALT_RDY) == 0)
654 break;
655 if (time_after(jiffies, timeout))
656 break;
657 udelay(1);
658 }
659
660 cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
661 if (read)
662 return mem & ALT_DATA;
663
664 return 0;
665 };
666
dvb_register(struct cx23885_tsport * port)667 static int dvb_register(struct cx23885_tsport *port)
668 {
669 struct cx23885_dev *dev = port->dev;
670 struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
671 struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
672 int mfe_shared = 0; /* bus not shared by default */
673 int ret;
674
675 /* Get the first frontend */
676 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
677 if (!fe0)
678 return -EINVAL;
679
680 /* init struct videobuf_dvb */
681 fe0->dvb.name = dev->name;
682
683 /* multi-frontend gate control is undefined or defaults to fe0 */
684 port->frontends.gate = 0;
685
686 /* Sets the gate control callback to be used by i2c command calls */
687 port->gate_ctrl = cx23885_dvb_gate_ctrl;
688
689 /* init frontend */
690 switch (dev->board) {
691 case CX23885_BOARD_HAUPPAUGE_HVR1250:
692 i2c_bus = &dev->i2c_bus[0];
693 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
694 &hauppauge_generic_config,
695 &i2c_bus->i2c_adap);
696 if (fe0->dvb.frontend != NULL) {
697 dvb_attach(mt2131_attach, fe0->dvb.frontend,
698 &i2c_bus->i2c_adap,
699 &hauppauge_generic_tunerconfig, 0);
700 }
701 break;
702 case CX23885_BOARD_HAUPPAUGE_HVR1270:
703 case CX23885_BOARD_HAUPPAUGE_HVR1275:
704 i2c_bus = &dev->i2c_bus[0];
705 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
706 &hauppauge_lgdt3305_config,
707 &i2c_bus->i2c_adap);
708 if (fe0->dvb.frontend != NULL) {
709 dvb_attach(tda18271_attach, fe0->dvb.frontend,
710 0x60, &dev->i2c_bus[1].i2c_adap,
711 &hauppauge_hvr127x_config);
712 }
713 break;
714 case CX23885_BOARD_HAUPPAUGE_HVR1255:
715 i2c_bus = &dev->i2c_bus[0];
716 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
717 &hcw_s5h1411_config,
718 &i2c_bus->i2c_adap);
719 if (fe0->dvb.frontend != NULL) {
720 dvb_attach(tda18271_attach, fe0->dvb.frontend,
721 0x60, &dev->i2c_bus[1].i2c_adap,
722 &hauppauge_tda18271_config);
723 }
724 break;
725 case CX23885_BOARD_HAUPPAUGE_HVR1800:
726 i2c_bus = &dev->i2c_bus[0];
727 switch (alt_tuner) {
728 case 1:
729 fe0->dvb.frontend =
730 dvb_attach(s5h1409_attach,
731 &hauppauge_ezqam_config,
732 &i2c_bus->i2c_adap);
733 if (fe0->dvb.frontend != NULL) {
734 dvb_attach(tda829x_attach, fe0->dvb.frontend,
735 &dev->i2c_bus[1].i2c_adap, 0x42,
736 &tda829x_no_probe);
737 dvb_attach(tda18271_attach, fe0->dvb.frontend,
738 0x60, &dev->i2c_bus[1].i2c_adap,
739 &hauppauge_tda18271_config);
740 }
741 break;
742 case 0:
743 default:
744 fe0->dvb.frontend =
745 dvb_attach(s5h1409_attach,
746 &hauppauge_generic_config,
747 &i2c_bus->i2c_adap);
748 if (fe0->dvb.frontend != NULL)
749 dvb_attach(mt2131_attach, fe0->dvb.frontend,
750 &i2c_bus->i2c_adap,
751 &hauppauge_generic_tunerconfig, 0);
752 break;
753 }
754 break;
755 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
756 i2c_bus = &dev->i2c_bus[0];
757 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
758 &hauppauge_hvr1800lp_config,
759 &i2c_bus->i2c_adap);
760 if (fe0->dvb.frontend != NULL) {
761 dvb_attach(mt2131_attach, fe0->dvb.frontend,
762 &i2c_bus->i2c_adap,
763 &hauppauge_generic_tunerconfig, 0);
764 }
765 break;
766 case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
767 i2c_bus = &dev->i2c_bus[0];
768 fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
769 &fusionhdtv_5_express,
770 &i2c_bus->i2c_adap);
771 if (fe0->dvb.frontend != NULL) {
772 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
773 &i2c_bus->i2c_adap, 0x61,
774 TUNER_LG_TDVS_H06XF);
775 }
776 break;
777 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
778 i2c_bus = &dev->i2c_bus[1];
779 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
780 &hauppauge_hvr1500q_config,
781 &dev->i2c_bus[0].i2c_adap);
782 if (fe0->dvb.frontend != NULL)
783 dvb_attach(xc5000_attach, fe0->dvb.frontend,
784 &i2c_bus->i2c_adap,
785 &hauppauge_hvr1500q_tunerconfig);
786 break;
787 case CX23885_BOARD_HAUPPAUGE_HVR1500:
788 i2c_bus = &dev->i2c_bus[1];
789 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
790 &hauppauge_hvr1500_config,
791 &dev->i2c_bus[0].i2c_adap);
792 if (fe0->dvb.frontend != NULL) {
793 struct dvb_frontend *fe;
794 struct xc2028_config cfg = {
795 .i2c_adap = &i2c_bus->i2c_adap,
796 .i2c_addr = 0x61,
797 };
798 static struct xc2028_ctrl ctl = {
799 .fname = XC2028_DEFAULT_FIRMWARE,
800 .max_len = 64,
801 .demod = XC3028_FE_OREN538,
802 };
803
804 fe = dvb_attach(xc2028_attach,
805 fe0->dvb.frontend, &cfg);
806 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
807 fe->ops.tuner_ops.set_config(fe, &ctl);
808 }
809 break;
810 case CX23885_BOARD_HAUPPAUGE_HVR1200:
811 case CX23885_BOARD_HAUPPAUGE_HVR1700:
812 i2c_bus = &dev->i2c_bus[0];
813 fe0->dvb.frontend = dvb_attach(tda10048_attach,
814 &hauppauge_hvr1200_config,
815 &i2c_bus->i2c_adap);
816 if (fe0->dvb.frontend != NULL) {
817 dvb_attach(tda829x_attach, fe0->dvb.frontend,
818 &dev->i2c_bus[1].i2c_adap, 0x42,
819 &tda829x_no_probe);
820 dvb_attach(tda18271_attach, fe0->dvb.frontend,
821 0x60, &dev->i2c_bus[1].i2c_adap,
822 &hauppauge_hvr1200_tuner_config);
823 }
824 break;
825 case CX23885_BOARD_HAUPPAUGE_HVR1210:
826 i2c_bus = &dev->i2c_bus[0];
827 fe0->dvb.frontend = dvb_attach(tda10048_attach,
828 &hauppauge_hvr1210_config,
829 &i2c_bus->i2c_adap);
830 if (fe0->dvb.frontend != NULL) {
831 dvb_attach(tda18271_attach, fe0->dvb.frontend,
832 0x60, &dev->i2c_bus[1].i2c_adap,
833 &hauppauge_hvr1210_tuner_config);
834 }
835 break;
836 case CX23885_BOARD_HAUPPAUGE_HVR1400:
837 i2c_bus = &dev->i2c_bus[0];
838 fe0->dvb.frontend = dvb_attach(dib7000p_attach,
839 &i2c_bus->i2c_adap,
840 0x12, &hauppauge_hvr1400_dib7000_config);
841 if (fe0->dvb.frontend != NULL) {
842 struct dvb_frontend *fe;
843 struct xc2028_config cfg = {
844 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
845 .i2c_addr = 0x64,
846 };
847 static struct xc2028_ctrl ctl = {
848 .fname = XC3028L_DEFAULT_FIRMWARE,
849 .max_len = 64,
850 .demod = XC3028_FE_DIBCOM52,
851 /* This is true for all demods with
852 v36 firmware? */
853 .type = XC2028_D2633,
854 };
855
856 fe = dvb_attach(xc2028_attach,
857 fe0->dvb.frontend, &cfg);
858 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
859 fe->ops.tuner_ops.set_config(fe, &ctl);
860 }
861 break;
862 case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
863 i2c_bus = &dev->i2c_bus[port->nr - 1];
864
865 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
866 &dvico_s5h1409_config,
867 &i2c_bus->i2c_adap);
868 if (fe0->dvb.frontend == NULL)
869 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
870 &dvico_s5h1411_config,
871 &i2c_bus->i2c_adap);
872 if (fe0->dvb.frontend != NULL)
873 dvb_attach(xc5000_attach, fe0->dvb.frontend,
874 &i2c_bus->i2c_adap,
875 &dvico_xc5000_tunerconfig);
876 break;
877 case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
878 i2c_bus = &dev->i2c_bus[port->nr - 1];
879
880 fe0->dvb.frontend = dvb_attach(zl10353_attach,
881 &dvico_fusionhdtv_xc3028,
882 &i2c_bus->i2c_adap);
883 if (fe0->dvb.frontend != NULL) {
884 struct dvb_frontend *fe;
885 struct xc2028_config cfg = {
886 .i2c_adap = &i2c_bus->i2c_adap,
887 .i2c_addr = 0x61,
888 };
889 static struct xc2028_ctrl ctl = {
890 .fname = XC2028_DEFAULT_FIRMWARE,
891 .max_len = 64,
892 .demod = XC3028_FE_ZARLINK456,
893 };
894
895 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
896 &cfg);
897 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
898 fe->ops.tuner_ops.set_config(fe, &ctl);
899 }
900 break;
901 }
902 case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
903 case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
904 case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
905 i2c_bus = &dev->i2c_bus[0];
906
907 fe0->dvb.frontend = dvb_attach(zl10353_attach,
908 &dvico_fusionhdtv_xc3028,
909 &i2c_bus->i2c_adap);
910 if (fe0->dvb.frontend != NULL) {
911 struct dvb_frontend *fe;
912 struct xc2028_config cfg = {
913 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
914 .i2c_addr = 0x61,
915 };
916 static struct xc2028_ctrl ctl = {
917 .fname = XC2028_DEFAULT_FIRMWARE,
918 .max_len = 64,
919 .demod = XC3028_FE_ZARLINK456,
920 };
921
922 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
923 &cfg);
924 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
925 fe->ops.tuner_ops.set_config(fe, &ctl);
926 }
927 break;
928 case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
929 i2c_bus = &dev->i2c_bus[0];
930
931 fe0->dvb.frontend = dvb_attach(zl10353_attach,
932 &dvico_fusionhdtv_xc3028,
933 &i2c_bus->i2c_adap);
934 if (fe0->dvb.frontend != NULL) {
935 struct dvb_frontend *fe;
936 struct xc4000_config cfg = {
937 .i2c_address = 0x61,
938 .default_pm = 0,
939 .dvb_amplitude = 134,
940 .set_smoothedcvbs = 1,
941 .if_khz = 4560
942 };
943
944 fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
945 &dev->i2c_bus[1].i2c_adap, &cfg);
946 if (!fe) {
947 printk(KERN_ERR "%s/2: xc4000 attach failed\n",
948 dev->name);
949 goto frontend_detach;
950 }
951 }
952 break;
953 case CX23885_BOARD_TBS_6920:
954 i2c_bus = &dev->i2c_bus[1];
955
956 fe0->dvb.frontend = dvb_attach(cx24116_attach,
957 &tbs_cx24116_config,
958 &i2c_bus->i2c_adap);
959 if (fe0->dvb.frontend != NULL)
960 fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
961
962 break;
963 case CX23885_BOARD_TEVII_S470:
964 i2c_bus = &dev->i2c_bus[1];
965
966 fe0->dvb.frontend = dvb_attach(ds3000_attach,
967 &tevii_ds3000_config,
968 &i2c_bus->i2c_adap);
969 if (fe0->dvb.frontend != NULL)
970 fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
971
972 break;
973 case CX23885_BOARD_DVBWORLD_2005:
974 i2c_bus = &dev->i2c_bus[1];
975
976 fe0->dvb.frontend = dvb_attach(cx24116_attach,
977 &dvbworld_cx24116_config,
978 &i2c_bus->i2c_adap);
979 break;
980 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
981 i2c_bus = &dev->i2c_bus[0];
982 switch (port->nr) {
983 /* port B */
984 case 1:
985 fe0->dvb.frontend = dvb_attach(stv0900_attach,
986 &netup_stv0900_config,
987 &i2c_bus->i2c_adap, 0);
988 if (fe0->dvb.frontend != NULL) {
989 if (dvb_attach(stv6110_attach,
990 fe0->dvb.frontend,
991 &netup_stv6110_tunerconfig_a,
992 &i2c_bus->i2c_adap)) {
993 if (!dvb_attach(lnbh24_attach,
994 fe0->dvb.frontend,
995 &i2c_bus->i2c_adap,
996 LNBH24_PCL | LNBH24_TTX,
997 LNBH24_TEN, 0x09))
998 printk(KERN_ERR
999 "No LNBH24 found!\n");
1000
1001 }
1002 }
1003 break;
1004 /* port C */
1005 case 2:
1006 fe0->dvb.frontend = dvb_attach(stv0900_attach,
1007 &netup_stv0900_config,
1008 &i2c_bus->i2c_adap, 1);
1009 if (fe0->dvb.frontend != NULL) {
1010 if (dvb_attach(stv6110_attach,
1011 fe0->dvb.frontend,
1012 &netup_stv6110_tunerconfig_b,
1013 &i2c_bus->i2c_adap)) {
1014 if (!dvb_attach(lnbh24_attach,
1015 fe0->dvb.frontend,
1016 &i2c_bus->i2c_adap,
1017 LNBH24_PCL | LNBH24_TTX,
1018 LNBH24_TEN, 0x0a))
1019 printk(KERN_ERR
1020 "No LNBH24 found!\n");
1021
1022 }
1023 }
1024 break;
1025 }
1026 break;
1027 case CX23885_BOARD_MYGICA_X8506:
1028 i2c_bus = &dev->i2c_bus[0];
1029 i2c_bus2 = &dev->i2c_bus[1];
1030 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1031 &mygica_x8506_lgs8gl5_config,
1032 &i2c_bus->i2c_adap);
1033 if (fe0->dvb.frontend != NULL) {
1034 dvb_attach(xc5000_attach,
1035 fe0->dvb.frontend,
1036 &i2c_bus2->i2c_adap,
1037 &mygica_x8506_xc5000_config);
1038 }
1039 break;
1040 case CX23885_BOARD_MAGICPRO_PROHDTVE2:
1041 i2c_bus = &dev->i2c_bus[0];
1042 i2c_bus2 = &dev->i2c_bus[1];
1043 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1044 &magicpro_prohdtve2_lgs8g75_config,
1045 &i2c_bus->i2c_adap);
1046 if (fe0->dvb.frontend != NULL) {
1047 dvb_attach(xc5000_attach,
1048 fe0->dvb.frontend,
1049 &i2c_bus2->i2c_adap,
1050 &magicpro_prohdtve2_xc5000_config);
1051 }
1052 break;
1053 case CX23885_BOARD_HAUPPAUGE_HVR1850:
1054 i2c_bus = &dev->i2c_bus[0];
1055 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1056 &hcw_s5h1411_config,
1057 &i2c_bus->i2c_adap);
1058 if (fe0->dvb.frontend != NULL)
1059 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1060 0x60, &dev->i2c_bus[0].i2c_adap,
1061 &hauppauge_tda18271_config);
1062
1063 tda18271_attach(&dev->ts1.analog_fe,
1064 0x60, &dev->i2c_bus[1].i2c_adap,
1065 &hauppauge_tda18271_config);
1066
1067 break;
1068 case CX23885_BOARD_HAUPPAUGE_HVR1290:
1069 i2c_bus = &dev->i2c_bus[0];
1070 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1071 &hcw_s5h1411_config,
1072 &i2c_bus->i2c_adap);
1073 if (fe0->dvb.frontend != NULL)
1074 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1075 0x60, &dev->i2c_bus[0].i2c_adap,
1076 &hauppauge_tda18271_config);
1077 break;
1078 case CX23885_BOARD_MYGICA_X8558PRO:
1079 switch (port->nr) {
1080 /* port B */
1081 case 1:
1082 i2c_bus = &dev->i2c_bus[0];
1083 fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1084 &mygica_x8558pro_atbm8830_cfg1,
1085 &i2c_bus->i2c_adap);
1086 if (fe0->dvb.frontend != NULL) {
1087 dvb_attach(max2165_attach,
1088 fe0->dvb.frontend,
1089 &i2c_bus->i2c_adap,
1090 &mygic_x8558pro_max2165_cfg1);
1091 }
1092 break;
1093 /* port C */
1094 case 2:
1095 i2c_bus = &dev->i2c_bus[1];
1096 fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1097 &mygica_x8558pro_atbm8830_cfg2,
1098 &i2c_bus->i2c_adap);
1099 if (fe0->dvb.frontend != NULL) {
1100 dvb_attach(max2165_attach,
1101 fe0->dvb.frontend,
1102 &i2c_bus->i2c_adap,
1103 &mygic_x8558pro_max2165_cfg2);
1104 }
1105 break;
1106 }
1107 break;
1108 case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
1109 i2c_bus = &dev->i2c_bus[0];
1110 mfe_shared = 1;/* MFE */
1111 port->frontends.gate = 0;/* not clear for me yet */
1112 /* ports B, C */
1113 /* MFE frontend 1 DVB-T */
1114 fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
1115 &netup_stv0367_config[port->nr - 1],
1116 &i2c_bus->i2c_adap);
1117 if (fe0->dvb.frontend != NULL) {
1118 if (NULL == dvb_attach(xc5000_attach,
1119 fe0->dvb.frontend,
1120 &i2c_bus->i2c_adap,
1121 &netup_xc5000_config[port->nr - 1]))
1122 goto frontend_detach;
1123 /* load xc5000 firmware */
1124 fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
1125 }
1126 /* MFE frontend 2 */
1127 fe1 = videobuf_dvb_get_frontend(&port->frontends, 2);
1128 if (fe1 == NULL)
1129 goto frontend_detach;
1130 /* DVB-C init */
1131 fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
1132 &netup_stv0367_config[port->nr - 1],
1133 &i2c_bus->i2c_adap);
1134 if (fe1->dvb.frontend != NULL) {
1135 fe1->dvb.frontend->id = 1;
1136 if (NULL == dvb_attach(xc5000_attach,
1137 fe1->dvb.frontend,
1138 &i2c_bus->i2c_adap,
1139 &netup_xc5000_config[port->nr - 1]))
1140 goto frontend_detach;
1141 }
1142 break;
1143 case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
1144 i2c_bus = &dev->i2c_bus[0];
1145 i2c_bus2 = &dev->i2c_bus[1];
1146
1147 switch (port->nr) {
1148 /* port b */
1149 case 1:
1150 fe0->dvb.frontend = dvb_attach(drxk_attach,
1151 &terratec_drxk_config[0],
1152 &i2c_bus->i2c_adap);
1153 if (fe0->dvb.frontend != NULL) {
1154 if (!dvb_attach(mt2063_attach,
1155 fe0->dvb.frontend,
1156 &terratec_mt2063_config[0],
1157 &i2c_bus2->i2c_adap))
1158 goto frontend_detach;
1159 }
1160 break;
1161 /* port c */
1162 case 2:
1163 fe0->dvb.frontend = dvb_attach(drxk_attach,
1164 &terratec_drxk_config[1],
1165 &i2c_bus->i2c_adap);
1166 if (fe0->dvb.frontend != NULL) {
1167 if (!dvb_attach(mt2063_attach,
1168 fe0->dvb.frontend,
1169 &terratec_mt2063_config[1],
1170 &i2c_bus2->i2c_adap))
1171 goto frontend_detach;
1172 }
1173 break;
1174 }
1175 break;
1176 default:
1177 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
1178 " isn't supported yet\n",
1179 dev->name);
1180 break;
1181 }
1182
1183 if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
1184 printk(KERN_ERR "%s: frontend initialization failed\n",
1185 dev->name);
1186 goto frontend_detach;
1187 }
1188
1189 /* define general-purpose callback pointer */
1190 fe0->dvb.frontend->callback = cx23885_tuner_callback;
1191 if (fe1)
1192 fe1->dvb.frontend->callback = cx23885_tuner_callback;
1193 #if 0
1194 /* Ensure all frontends negotiate bus access */
1195 fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
1196 if (fe1)
1197 fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
1198 #endif
1199
1200 /* Put the analog decoder in standby to keep it quiet */
1201 call_all(dev, core, s_power, 0);
1202
1203 if (fe0->dvb.frontend->ops.analog_ops.standby)
1204 fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
1205
1206 /* register everything */
1207 ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
1208 &dev->pci->dev, adapter_nr, mfe_shared,
1209 NULL);
1210 if (ret)
1211 goto frontend_detach;
1212
1213 /* init CI & MAC */
1214 switch (dev->board) {
1215 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
1216 static struct netup_card_info cinfo;
1217
1218 netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
1219 memcpy(port->frontends.adapter.proposed_mac,
1220 cinfo.port[port->nr - 1].mac, 6);
1221 printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
1222 port->nr, port->frontends.adapter.proposed_mac);
1223
1224 netup_ci_init(port);
1225 break;
1226 }
1227 case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
1228 struct altera_ci_config netup_ci_cfg = {
1229 .dev = dev,/* magic number to identify*/
1230 .adapter = &port->frontends.adapter,/* for CI */
1231 .demux = &fe0->dvb.demux,/* for hw pid filter */
1232 .fpga_rw = netup_altera_fpga_rw,
1233 };
1234
1235 altera_ci_init(&netup_ci_cfg, port->nr);
1236 break;
1237 }
1238 case CX23885_BOARD_TEVII_S470: {
1239 u8 eeprom[256]; /* 24C02 i2c eeprom */
1240
1241 if (port->nr != 1)
1242 break;
1243
1244 /* Read entire EEPROM */
1245 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1246 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
1247 printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
1248 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
1249 break;
1250 }
1251 }
1252
1253 return ret;
1254
1255 frontend_detach:
1256 port->gate_ctrl = NULL;
1257 videobuf_dvb_dealloc_frontends(&port->frontends);
1258 return -EINVAL;
1259 }
1260
cx23885_dvb_register(struct cx23885_tsport * port)1261 int cx23885_dvb_register(struct cx23885_tsport *port)
1262 {
1263
1264 struct videobuf_dvb_frontend *fe0;
1265 struct cx23885_dev *dev = port->dev;
1266 int err, i;
1267
1268 /* Here we need to allocate the correct number of frontends,
1269 * as reflected in the cards struct. The reality is that currently
1270 * no cx23885 boards support this - yet. But, if we don't modify this
1271 * code then the second frontend would never be allocated (later)
1272 * and fail with error before the attach in dvb_register().
1273 * Without these changes we risk an OOPS later. The changes here
1274 * are for safety, and should provide a good foundation for the
1275 * future addition of any multi-frontend cx23885 based boards.
1276 */
1277 printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
1278 port->num_frontends);
1279
1280 for (i = 1; i <= port->num_frontends; i++) {
1281 if (videobuf_dvb_alloc_frontend(
1282 &port->frontends, i) == NULL) {
1283 printk(KERN_ERR "%s() failed to alloc\n", __func__);
1284 return -ENOMEM;
1285 }
1286
1287 fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
1288 if (!fe0)
1289 err = -EINVAL;
1290
1291 dprintk(1, "%s\n", __func__);
1292 dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
1293 dev->board,
1294 dev->name,
1295 dev->pci_bus,
1296 dev->pci_slot);
1297
1298 err = -ENODEV;
1299
1300 /* dvb stuff */
1301 /* We have to init the queue for each frontend on a port. */
1302 printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
1303 videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
1304 &dev->pci->dev, &port->slock,
1305 V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
1306 sizeof(struct cx23885_buffer), port, NULL);
1307 }
1308 err = dvb_register(port);
1309 if (err != 0)
1310 printk(KERN_ERR "%s() dvb_register failed err = %d\n",
1311 __func__, err);
1312
1313 return err;
1314 }
1315
cx23885_dvb_unregister(struct cx23885_tsport * port)1316 int cx23885_dvb_unregister(struct cx23885_tsport *port)
1317 {
1318 struct videobuf_dvb_frontend *fe0;
1319
1320 /* FIXME: in an error condition where the we have
1321 * an expected number of frontends (attach problem)
1322 * then this might not clean up correctly, if 1
1323 * is invalid.
1324 * This comment only applies to future boards IF they
1325 * implement MFE support.
1326 */
1327 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
1328 if (fe0 && fe0->dvb.frontend)
1329 videobuf_dvb_unregister_bus(&port->frontends);
1330
1331 switch (port->dev->board) {
1332 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
1333 netup_ci_exit(port);
1334 break;
1335 case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
1336 altera_ci_release(port->dev, port->nr);
1337 break;
1338 }
1339
1340 port->gate_ctrl = NULL;
1341
1342 return 0;
1343 }
1344
1345