1 /*
2  * Device driver for the PMU on 68K-based Apple PowerBooks
3  *
4  * The VIA (versatile interface adapter) interfaces to the PMU,
5  * a 6805 microprocessor core whose primary function is to control
6  * battery charging and system power on the PowerBooks.
7  * The PMU also controls the ADB (Apple Desktop Bus) which connects
8  * to the keyboard and mouse, as well as the non-volatile RAM
9  * and the RTC (real time clock) chip.
10  *
11  * Adapted for 68K PMU by Joshua M. Thompson
12  *
13  * Based largely on the PowerMac PMU code by Paul Mackerras and
14  * Fabio Riccardi.
15  *
16  * Also based on the PMU driver from MkLinux by Apple Computer, Inc.
17  * and the Open Software Foundation, Inc.
18  */
19 
20 #include <stdarg.h>
21 #include <linux/types.h>
22 #include <linux/errno.h>
23 #include <linux/kernel.h>
24 #include <linux/delay.h>
25 #include <linux/miscdevice.h>
26 #include <linux/blkdev.h>
27 #include <linux/pci.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 
31 #include <linux/adb.h>
32 #include <linux/pmu.h>
33 #include <linux/cuda.h>
34 
35 #include <asm/macintosh.h>
36 #include <asm/macints.h>
37 #include <asm/mac_via.h>
38 
39 #include <asm/pgtable.h>
40 #include <asm/system.h>
41 #include <asm/irq.h>
42 #include <asm/uaccess.h>
43 
44 /* Misc minor number allocated for /dev/pmu */
45 #define PMU_MINOR	154
46 
47 /* VIA registers - spaced 0x200 bytes apart */
48 #define RS		0x200		/* skip between registers */
49 #define B		0		/* B-side data */
50 #define A		RS		/* A-side data */
51 #define DIRB		(2*RS)		/* B-side direction (1=output) */
52 #define DIRA		(3*RS)		/* A-side direction (1=output) */
53 #define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
54 #define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
55 #define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
56 #define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
57 #define T2CL		(8*RS)		/* Timer 2 ctr/latch (low 8 bits) */
58 #define T2CH		(9*RS)		/* Timer 2 counter (high 8 bits) */
59 #define SR		(10*RS)		/* Shift register */
60 #define ACR		(11*RS)		/* Auxiliary control register */
61 #define PCR		(12*RS)		/* Peripheral control register */
62 #define IFR		(13*RS)		/* Interrupt flag register */
63 #define IER		(14*RS)		/* Interrupt enable register */
64 #define ANH		(15*RS)		/* A-side data, no handshake */
65 
66 /* Bits in B data register: both active low */
67 #define TACK		0x02		/* Transfer acknowledge (input) */
68 #define TREQ		0x04		/* Transfer request (output) */
69 
70 /* Bits in ACR */
71 #define SR_CTRL		0x1c		/* Shift register control bits */
72 #define SR_EXT		0x0c		/* Shift on external clock */
73 #define SR_OUT		0x10		/* Shift out if 1 */
74 
75 /* Bits in IFR and IER */
76 #define SR_INT		0x04		/* Shift register full/empty */
77 #define CB1_INT		0x10		/* transition on CB1 input */
78 
79 static enum pmu_state {
80 	idle,
81 	sending,
82 	intack,
83 	reading,
84 	reading_intr,
85 } pmu_state;
86 
87 static struct adb_request *current_req;
88 static struct adb_request *last_req;
89 static struct adb_request *req_awaiting_reply;
90 static unsigned char interrupt_data[32];
91 static unsigned char *reply_ptr;
92 static int data_index;
93 static int data_len;
94 static int adb_int_pending;
95 static int pmu_adb_flags;
96 static int adb_dev_map;
97 static struct adb_request bright_req_1, bright_req_2, bright_req_3;
98 static int pmu_kind = PMU_UNKNOWN;
99 static int pmu_fully_inited;
100 
101 int asleep;
102 
103 static int pmu_probe(void);
104 static int pmu_init(void);
105 static void pmu_start(void);
106 static irqreturn_t pmu_interrupt(int irq, void *arg);
107 static int pmu_send_request(struct adb_request *req, int sync);
108 static int pmu_autopoll(int devs);
109 void pmu_poll(void);
110 static int pmu_reset_bus(void);
111 
112 static void pmu_start(void);
113 static void send_byte(int x);
114 static void recv_byte(void);
115 static void pmu_done(struct adb_request *req);
116 static void pmu_handle_data(unsigned char *data, int len);
117 static void set_volume(int level);
118 static void pmu_enable_backlight(int on);
119 static void pmu_set_brightness(int level);
120 
121 struct adb_driver via_pmu_driver = {
122 	"68K PMU",
123 	pmu_probe,
124 	pmu_init,
125 	pmu_send_request,
126 	pmu_autopoll,
127 	pmu_poll,
128 	pmu_reset_bus
129 };
130 
131 /*
132  * This table indicates for each PMU opcode:
133  * - the number of data bytes to be sent with the command, or -1
134  *   if a length byte should be sent,
135  * - the number of response bytes which the PMU will return, or
136  *   -1 if it will send a length byte.
137  */
138 static s8 pmu_data_len[256][2] = {
139 /*	   0	   1	   2	   3	   4	   5	   6	   7  */
140 /*00*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
141 /*08*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
142 /*10*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
143 /*18*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
144 /*20*/	{-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
145 /*28*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
146 /*30*/	{ 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
147 /*38*/	{ 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
148 /*40*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
149 /*48*/	{ 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
150 /*50*/	{ 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
151 /*58*/	{ 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
152 /*60*/	{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
153 /*68*/	{ 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
154 /*70*/	{ 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
155 /*78*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
156 /*80*/	{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
157 /*88*/	{ 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
158 /*90*/	{ 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
159 /*98*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
160 /*a0*/	{ 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
161 /*a8*/	{ 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
162 /*b0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
163 /*b8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
164 /*c0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
165 /*c8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
166 /*d0*/	{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
167 /*d8*/	{ 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
168 /*e0*/	{-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
169 /*e8*/	{ 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
170 /*f0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
171 /*f8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
172 };
173 
pmu_probe(void)174 int pmu_probe(void)
175 {
176 	if (macintosh_config->adb_type == MAC_ADB_PB1) {
177 		pmu_kind = PMU_68K_V1;
178 	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
179 		pmu_kind = PMU_68K_V2;
180 	} else {
181 		return -ENODEV;
182 	}
183 
184 	pmu_state = idle;
185 
186 	return 0;
187 }
188 
189 static int
pmu_init(void)190 pmu_init(void)
191 {
192 	int timeout;
193 	volatile struct adb_request req;
194 
195 	via2[B] |= TREQ;				/* negate TREQ */
196 	via2[DIRB] = (via2[DIRB] | TREQ) & ~TACK;	/* TACK in, TREQ out */
197 
198 	pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB);
199 	timeout =  100000;
200 	while (!req.complete) {
201 		if (--timeout < 0) {
202 			printk(KERN_ERR "pmu_init: no response from PMU\n");
203 			return -EAGAIN;
204 		}
205 		udelay(10);
206 		pmu_poll();
207 	}
208 
209 	/* ack all pending interrupts */
210 	timeout = 100000;
211 	interrupt_data[0] = 1;
212 	while (interrupt_data[0] || pmu_state != idle) {
213 		if (--timeout < 0) {
214 			printk(KERN_ERR "pmu_init: timed out acking intrs\n");
215 			return -EAGAIN;
216 		}
217 		if (pmu_state == idle) {
218 			adb_int_pending = 1;
219 			pmu_interrupt(0, NULL);
220 		}
221 		pmu_poll();
222 		udelay(10);
223 	}
224 
225 	pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK,
226 			PMU_INT_ADB_AUTO|PMU_INT_SNDBRT|PMU_INT_ADB);
227 	timeout =  100000;
228 	while (!req.complete) {
229 		if (--timeout < 0) {
230 			printk(KERN_ERR "pmu_init: no response from PMU\n");
231 			return -EAGAIN;
232 		}
233 		udelay(10);
234 		pmu_poll();
235 	}
236 
237 	bright_req_1.complete = 1;
238 	bright_req_2.complete = 1;
239 	bright_req_3.complete = 1;
240 
241 	if (request_irq(IRQ_MAC_ADB_SR, pmu_interrupt, 0, "pmu-shift",
242 			pmu_interrupt)) {
243 		printk(KERN_ERR "pmu_init: can't get irq %d\n",
244 			IRQ_MAC_ADB_SR);
245 		return -EAGAIN;
246 	}
247 	if (request_irq(IRQ_MAC_ADB_CL, pmu_interrupt, 0, "pmu-clock",
248 			pmu_interrupt)) {
249 		printk(KERN_ERR "pmu_init: can't get irq %d\n",
250 			IRQ_MAC_ADB_CL);
251 		free_irq(IRQ_MAC_ADB_SR, pmu_interrupt);
252 		return -EAGAIN;
253 	}
254 
255 	pmu_fully_inited = 1;
256 
257 	/* Enable backlight */
258 	pmu_enable_backlight(1);
259 
260 	printk("adb: PMU 68K driver v0.5 for Unified ADB.\n");
261 
262 	return 0;
263 }
264 
265 int
pmu_get_model(void)266 pmu_get_model(void)
267 {
268 	return pmu_kind;
269 }
270 
271 /* Send an ADB command */
272 static int
pmu_send_request(struct adb_request * req,int sync)273 pmu_send_request(struct adb_request *req, int sync)
274 {
275     int i, ret;
276 
277     if (!pmu_fully_inited)
278     {
279  	req->complete = 1;
280    	return -ENXIO;
281    }
282 
283     ret = -EINVAL;
284 
285     switch (req->data[0]) {
286     case PMU_PACKET:
287 		for (i = 0; i < req->nbytes - 1; ++i)
288 			req->data[i] = req->data[i+1];
289 		--req->nbytes;
290 		if (pmu_data_len[req->data[0]][1] != 0) {
291 			req->reply[0] = ADB_RET_OK;
292 			req->reply_len = 1;
293 		} else
294 			req->reply_len = 0;
295 		ret = pmu_queue_request(req);
296 		break;
297     case CUDA_PACKET:
298 		switch (req->data[1]) {
299 		case CUDA_GET_TIME:
300 			if (req->nbytes != 2)
301 				break;
302 			req->data[0] = PMU_READ_RTC;
303 			req->nbytes = 1;
304 			req->reply_len = 3;
305 			req->reply[0] = CUDA_PACKET;
306 			req->reply[1] = 0;
307 			req->reply[2] = CUDA_GET_TIME;
308 			ret = pmu_queue_request(req);
309 			break;
310 		case CUDA_SET_TIME:
311 			if (req->nbytes != 6)
312 				break;
313 			req->data[0] = PMU_SET_RTC;
314 			req->nbytes = 5;
315 			for (i = 1; i <= 4; ++i)
316 				req->data[i] = req->data[i+1];
317 			req->reply_len = 3;
318 			req->reply[0] = CUDA_PACKET;
319 			req->reply[1] = 0;
320 			req->reply[2] = CUDA_SET_TIME;
321 			ret = pmu_queue_request(req);
322 			break;
323 		case CUDA_GET_PRAM:
324 			if (req->nbytes != 4)
325 				break;
326 			req->data[0] = PMU_READ_NVRAM;
327 			req->data[1] = req->data[2];
328 			req->data[2] = req->data[3];
329 			req->nbytes = 3;
330 			req->reply_len = 3;
331 			req->reply[0] = CUDA_PACKET;
332 			req->reply[1] = 0;
333 			req->reply[2] = CUDA_GET_PRAM;
334 			ret = pmu_queue_request(req);
335 			break;
336 		case CUDA_SET_PRAM:
337 			if (req->nbytes != 5)
338 				break;
339 			req->data[0] = PMU_WRITE_NVRAM;
340 			req->data[1] = req->data[2];
341 			req->data[2] = req->data[3];
342 			req->data[3] = req->data[4];
343 			req->nbytes = 4;
344 			req->reply_len = 3;
345 			req->reply[0] = CUDA_PACKET;
346 			req->reply[1] = 0;
347 			req->reply[2] = CUDA_SET_PRAM;
348 			ret = pmu_queue_request(req);
349 			break;
350 		}
351 		break;
352     case ADB_PACKET:
353 		for (i = req->nbytes - 1; i > 1; --i)
354 			req->data[i+2] = req->data[i];
355 		req->data[3] = req->nbytes - 2;
356 		req->data[2] = pmu_adb_flags;
357 		/*req->data[1] = req->data[1];*/
358 		req->data[0] = PMU_ADB_CMD;
359 		req->nbytes += 2;
360 		req->reply_expected = 1;
361 		req->reply_len = 0;
362 		ret = pmu_queue_request(req);
363 		break;
364     }
365     if (ret)
366     {
367     	req->complete = 1;
368     	return ret;
369     }
370 
371     if (sync) {
372 	while (!req->complete)
373 		pmu_poll();
374     }
375 
376     return 0;
377 }
378 
379 /* Enable/disable autopolling */
380 static int
pmu_autopoll(int devs)381 pmu_autopoll(int devs)
382 {
383 	struct adb_request req;
384 
385 	if (!pmu_fully_inited) return -ENXIO;
386 
387 	if (devs) {
388 		adb_dev_map = devs;
389 		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
390 			    adb_dev_map >> 8, adb_dev_map);
391 		pmu_adb_flags = 2;
392 	} else {
393 		pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
394 		pmu_adb_flags = 0;
395 	}
396 	while (!req.complete)
397 		pmu_poll();
398 	return 0;
399 }
400 
401 /* Reset the ADB bus */
402 static int
pmu_reset_bus(void)403 pmu_reset_bus(void)
404 {
405 	struct adb_request req;
406 	long timeout;
407 	int save_autopoll = adb_dev_map;
408 
409 	if (!pmu_fully_inited) return -ENXIO;
410 
411 	/* anyone got a better idea?? */
412 	pmu_autopoll(0);
413 
414 	req.nbytes = 5;
415 	req.done = NULL;
416 	req.data[0] = PMU_ADB_CMD;
417 	req.data[1] = 0;
418 	req.data[2] = 3; /* ADB_BUSRESET ??? */
419 	req.data[3] = 0;
420 	req.data[4] = 0;
421 	req.reply_len = 0;
422 	req.reply_expected = 1;
423 	if (pmu_queue_request(&req) != 0)
424 	{
425 		printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
426 		return -EIO;
427 	}
428 	while (!req.complete)
429 		pmu_poll();
430 	timeout = 100000;
431 	while (!req.complete) {
432 		if (--timeout < 0) {
433 			printk(KERN_ERR "pmu_adb_reset_bus (reset): no response from PMU\n");
434 			return -EIO;
435 		}
436 		udelay(10);
437 		pmu_poll();
438 	}
439 
440 	if (save_autopoll != 0)
441 		pmu_autopoll(save_autopoll);
442 
443 	return 0;
444 }
445 
446 /* Construct and send a pmu request */
447 int
pmu_request(struct adb_request * req,void (* done)(struct adb_request *),int nbytes,...)448 pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
449 	    int nbytes, ...)
450 {
451 	va_list list;
452 	int i;
453 
454 	if (nbytes < 0 || nbytes > 32) {
455 		printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
456 		req->complete = 1;
457 		return -EINVAL;
458 	}
459 	req->nbytes = nbytes;
460 	req->done = done;
461 	va_start(list, nbytes);
462 	for (i = 0; i < nbytes; ++i)
463 		req->data[i] = va_arg(list, int);
464 	va_end(list);
465 	if (pmu_data_len[req->data[0]][1] != 0) {
466 		req->reply[0] = ADB_RET_OK;
467 		req->reply_len = 1;
468 	} else
469 		req->reply_len = 0;
470 	req->reply_expected = 0;
471 	return pmu_queue_request(req);
472 }
473 
474 int
pmu_queue_request(struct adb_request * req)475 pmu_queue_request(struct adb_request *req)
476 {
477 	unsigned long flags;
478 	int nsend;
479 
480 	if (req->nbytes <= 0) {
481 		req->complete = 1;
482 		return 0;
483 	}
484 	nsend = pmu_data_len[req->data[0]][0];
485 	if (nsend >= 0 && req->nbytes != nsend + 1) {
486 		req->complete = 1;
487 		return -EINVAL;
488 	}
489 
490 	req->next = NULL;
491 	req->sent = 0;
492 	req->complete = 0;
493 	local_irq_save(flags);
494 
495 	if (current_req != 0) {
496 		last_req->next = req;
497 		last_req = req;
498 	} else {
499 		current_req = req;
500 		last_req = req;
501 		if (pmu_state == idle)
502 			pmu_start();
503 	}
504 
505 	local_irq_restore(flags);
506 	return 0;
507 }
508 
509 static void
send_byte(int x)510 send_byte(int x)
511 {
512 	via1[ACR] |= SR_CTRL;
513 	via1[SR] = x;
514 	via2[B] &= ~TREQ;		/* assert TREQ */
515 }
516 
517 static void
recv_byte(void)518 recv_byte(void)
519 {
520 	char c;
521 
522 	via1[ACR] = (via1[ACR] | SR_EXT) & ~SR_OUT;
523 	c = via1[SR];		/* resets SR */
524 	via2[B] &= ~TREQ;
525 }
526 
527 static void
pmu_start(void)528 pmu_start(void)
529 {
530 	unsigned long flags;
531 	struct adb_request *req;
532 
533 	/* assert pmu_state == idle */
534 	/* get the packet to send */
535 	local_irq_save(flags);
536 	req = current_req;
537 	if (req == 0 || pmu_state != idle
538 	    || (req->reply_expected && req_awaiting_reply))
539 		goto out;
540 
541 	pmu_state = sending;
542 	data_index = 1;
543 	data_len = pmu_data_len[req->data[0]][0];
544 
545 	/* set the shift register to shift out and send a byte */
546 	send_byte(req->data[0]);
547 
548 out:
549 	local_irq_restore(flags);
550 }
551 
552 void
pmu_poll(void)553 pmu_poll(void)
554 {
555 	unsigned long flags;
556 
557 	local_irq_save(flags);
558 	if (via1[IFR] & SR_INT) {
559 		via1[IFR] = SR_INT;
560 		pmu_interrupt(IRQ_MAC_ADB_SR, NULL);
561 	}
562 	if (via1[IFR] & CB1_INT) {
563 		via1[IFR] = CB1_INT;
564 		pmu_interrupt(IRQ_MAC_ADB_CL, NULL);
565 	}
566 	local_irq_restore(flags);
567 }
568 
569 static irqreturn_t
pmu_interrupt(int irq,void * dev_id)570 pmu_interrupt(int irq, void *dev_id)
571 {
572 	struct adb_request *req;
573 	int timeout, bite = 0;	/* to prevent compiler warning */
574 
575 #if 0
576 	printk("pmu_interrupt: irq %d state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
577 		irq, pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
578 #endif
579 
580 	if (irq == IRQ_MAC_ADB_CL) {		/* CB1 interrupt */
581 		adb_int_pending = 1;
582 	} else if (irq == IRQ_MAC_ADB_SR) {	/* SR interrupt  */
583 		if (via2[B] & TACK) {
584 			printk(KERN_DEBUG "PMU: SR_INT but ack still high! (%x)\n", via2[B]);
585 		}
586 
587 		/* if reading grab the byte */
588 		if ((via1[ACR] & SR_OUT) == 0) bite = via1[SR];
589 
590 		/* reset TREQ and wait for TACK to go high */
591 		via2[B] |= TREQ;
592 		timeout = 3200;
593 		while (!(via2[B] & TACK)) {
594 			if (--timeout < 0) {
595 				printk(KERN_ERR "PMU not responding (!ack)\n");
596 				goto finish;
597 			}
598 			udelay(10);
599 		}
600 
601 		switch (pmu_state) {
602 		case sending:
603 			req = current_req;
604 			if (data_len < 0) {
605 				data_len = req->nbytes - 1;
606 				send_byte(data_len);
607 				break;
608 			}
609 			if (data_index <= data_len) {
610 				send_byte(req->data[data_index++]);
611 				break;
612 			}
613 			req->sent = 1;
614 			data_len = pmu_data_len[req->data[0]][1];
615 			if (data_len == 0) {
616 				pmu_state = idle;
617 				current_req = req->next;
618 				if (req->reply_expected)
619 					req_awaiting_reply = req;
620 				else
621 					pmu_done(req);
622 			} else {
623 				pmu_state = reading;
624 				data_index = 0;
625 				reply_ptr = req->reply + req->reply_len;
626 				recv_byte();
627 			}
628 			break;
629 
630 		case intack:
631 			data_index = 0;
632 			data_len = -1;
633 			pmu_state = reading_intr;
634 			reply_ptr = interrupt_data;
635 			recv_byte();
636 			break;
637 
638 		case reading:
639 		case reading_intr:
640 			if (data_len == -1) {
641 				data_len = bite;
642 				if (bite > 32)
643 					printk(KERN_ERR "PMU: bad reply len %d\n",
644 					       bite);
645 			} else {
646 				reply_ptr[data_index++] = bite;
647 			}
648 			if (data_index < data_len) {
649 				recv_byte();
650 				break;
651 			}
652 
653 			if (pmu_state == reading_intr) {
654 				pmu_handle_data(interrupt_data, data_index);
655 			} else {
656 				req = current_req;
657 				current_req = req->next;
658 				req->reply_len += data_index;
659 				pmu_done(req);
660 			}
661 			pmu_state = idle;
662 
663 			break;
664 
665 		default:
666 			printk(KERN_ERR "pmu_interrupt: unknown state %d?\n",
667 			       pmu_state);
668 		}
669 	}
670 finish:
671 	if (pmu_state == idle) {
672 		if (adb_int_pending) {
673 			pmu_state = intack;
674 			send_byte(PMU_INT_ACK);
675 			adb_int_pending = 0;
676 		} else if (current_req) {
677 			pmu_start();
678 		}
679 	}
680 
681 #if 0
682 	printk("pmu_interrupt: exit state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
683 		pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
684 #endif
685 	return IRQ_HANDLED;
686 }
687 
688 static void
pmu_done(struct adb_request * req)689 pmu_done(struct adb_request *req)
690 {
691 	req->complete = 1;
692 	if (req->done)
693 		(*req->done)(req);
694 }
695 
696 /* Interrupt data could be the result data from an ADB cmd */
697 static void
pmu_handle_data(unsigned char * data,int len)698 pmu_handle_data(unsigned char *data, int len)
699 {
700 	static int show_pmu_ints = 1;
701 
702 	asleep = 0;
703 	if (len < 1) {
704 		adb_int_pending = 0;
705 		return;
706 	}
707 	if (data[0] & PMU_INT_ADB) {
708 		if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
709 			struct adb_request *req = req_awaiting_reply;
710 			if (req == 0) {
711 				printk(KERN_ERR "PMU: extra ADB reply\n");
712 				return;
713 			}
714 			req_awaiting_reply = NULL;
715 			if (len <= 2)
716 				req->reply_len = 0;
717 			else {
718 				memcpy(req->reply, data + 1, len - 1);
719 				req->reply_len = len - 1;
720 			}
721 			pmu_done(req);
722 		} else {
723 			adb_input(data+1, len-1, 1);
724 		}
725 	} else {
726 		if (data[0] == 0x08 && len == 3) {
727 			/* sound/brightness buttons pressed */
728 			pmu_set_brightness(data[1] >> 3);
729 			set_volume(data[2]);
730 		} else if (show_pmu_ints
731 			   && !(data[0] == PMU_INT_TICK && len == 1)) {
732 			int i;
733 			printk(KERN_DEBUG "pmu intr");
734 			for (i = 0; i < len; ++i)
735 				printk(" %.2x", data[i]);
736 			printk("\n");
737 		}
738 	}
739 }
740 
741 static int backlight_level = -1;
742 static int backlight_enabled = 0;
743 
744 #define LEVEL_TO_BRIGHT(lev)	((lev) < 1? 0x7f: 0x4a - ((lev) << 1))
745 
746 static void
pmu_enable_backlight(int on)747 pmu_enable_backlight(int on)
748 {
749 	struct adb_request req;
750 
751 	if (on) {
752 	    /* first call: get current backlight value */
753 	    if (backlight_level < 0) {
754 		switch(pmu_kind) {
755 		    case PMU_68K_V1:
756 		    case PMU_68K_V2:
757 			pmu_request(&req, NULL, 3, PMU_READ_NVRAM, 0x14, 0xe);
758 			while (!req.complete)
759 				pmu_poll();
760 			printk(KERN_DEBUG "pmu: nvram returned bright: %d\n", (int)req.reply[1]);
761 			backlight_level = req.reply[1];
762 			break;
763 		    default:
764 		        backlight_enabled = 0;
765 		        return;
766 		}
767 	    }
768 	    pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
769 	    	LEVEL_TO_BRIGHT(backlight_level));
770 	    while (!req.complete)
771 		pmu_poll();
772 	}
773 	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
774 	    PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
775 	while (!req.complete)
776 		pmu_poll();
777 	backlight_enabled = on;
778 }
779 
780 static void
pmu_set_brightness(int level)781 pmu_set_brightness(int level)
782 {
783 	int bright;
784 
785 	backlight_level = level;
786 	bright = LEVEL_TO_BRIGHT(level);
787 	if (!backlight_enabled)
788 		return;
789 	if (bright_req_1.complete)
790 		pmu_request(&bright_req_1, NULL, 2, PMU_BACKLIGHT_BRIGHT,
791 		    bright);
792 	if (bright_req_2.complete)
793 		pmu_request(&bright_req_2, NULL, 2, PMU_POWER_CTRL,
794 		    PMU_POW_BACKLIGHT | (bright < 0x7f ? PMU_POW_ON : PMU_POW_OFF));
795 }
796 
797 void
pmu_enable_irled(int on)798 pmu_enable_irled(int on)
799 {
800 	struct adb_request req;
801 
802 	pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
803 	    (on ? PMU_POW_ON : PMU_POW_OFF));
804 	while (!req.complete)
805 		pmu_poll();
806 }
807 
808 static void
set_volume(int level)809 set_volume(int level)
810 {
811 }
812 
813 int
pmu_present(void)814 pmu_present(void)
815 {
816 	return (pmu_kind != PMU_UNKNOWN);
817 }
818