1/*
2 * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&board_soc {
36	i2c@3100 {
37		rtc@68 {
38			compatible = "dallas,ds3232";
39			reg = <0x68>;
40			interrupts = <0 0x1 0 0>;
41		};
42	};
43
44	spi@7000 {
45		flash@0 {
46			#address-cells = <1>;
47			#size-cells = <1>;
48			compatible = "spansion,s25sl12801";
49			reg = <0>;
50			spi-max-frequency = <40000000>;
51			partition@u-boot {
52				label = "u-boot";
53				reg = <0x00000000 0x00100000>;
54				read-only;
55			};
56			partition@kernel {
57				label = "kernel";
58				reg = <0x00100000 0x00500000>;
59				read-only;
60			};
61			partition@dtb {
62				label = "dtb";
63				reg = <0x00600000 0x00100000>;
64				read-only;
65			};
66			partition@fs {
67				label = "file system";
68				reg = <0x00700000 0x00900000>;
69			};
70		};
71		flash@1 {
72			compatible = "spansion,s25sl12801";
73			reg = <1>;
74			spi-max-frequency = <40000000>;
75		};
76		flash@2 {
77			compatible = "spansion,s25sl12801";
78			reg = <2>;
79			spi-max-frequency = <40000000>;
80		};
81		flash@3 {
82			compatible = "spansion,s25sl12801";
83			reg = <3>;
84			spi-max-frequency = <40000000>;
85		};
86	};
87
88	usb@22000 {
89		phy_type = "ulpi";
90	};
91
92	usb@23000 {
93		phy_type = "ulpi";
94	};
95
96	enet0: ethernet@24000 {
97		tbi-handle = <&tbi0>;
98		phy-handle = <&phy1>;
99		phy-connection-type = "rgmii-id";
100	};
101
102	mdio@24520 {
103		phy0: ethernet-phy@0 {
104			interrupts = <10 0x1 0 0>;
105			reg = <0>;
106			device_type = "ethernet-phy";
107		};
108		phy1: ethernet-phy@1 {
109			interrupts = <10 0x1 0 0>;
110			reg = <1>;
111			device_type = "ethernet-phy";
112		};
113		tbi0: tbi-phy@11 {
114			reg = <0x11>;
115			device_type = "tbi-phy";
116		};
117	};
118
119	enet2: ethernet@26000 {
120		tbi-handle = <&tbi1>;
121		phy-handle = <&phy0>;
122		phy-connection-type = "rgmii-id";
123	};
124
125	mdio@26520 {
126		#address-cells = <1>;
127		#size-cells = <0>;
128		compatible = "fsl,gianfar-tbi";
129		reg = <0x26520 0x20>;
130
131		tbi1: tbi-phy@11 {
132			reg = <0x11>;
133			device_type = "tbi-phy";
134		};
135	};
136
137	usb@2b000 {
138		dr_mode = "peripheral";
139		phy_type = "ulpi";
140	};
141};
142