1 /*
2 * ezx.c - Common code for the EZX platform.
3 *
4 * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
5 * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
6 * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/pwm_backlight.h>
19 #include <linux/input.h>
20 #include <linux/gpio.h>
21 #include <linux/gpio_keys.h>
22 #include <linux/leds-lp3944.h>
23 #include <linux/i2c/pxa-i2c.h>
24
25 #include <media/soc_camera.h>
26
27 #include <asm/setup.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30
31 #include <mach/pxa27x.h>
32 #include <mach/pxafb.h>
33 #include <mach/ohci.h>
34 #include <mach/hardware.h>
35 #include <plat/pxa27x_keypad.h>
36 #include <mach/camera.h>
37
38 #include "devices.h"
39 #include "generic.h"
40
41 #define EZX_NR_IRQS (IRQ_BOARD_START + 24)
42
43 #define GPIO12_A780_FLIP_LID 12
44 #define GPIO15_A1200_FLIP_LID 15
45 #define GPIO15_A910_FLIP_LID 15
46 #define GPIO12_E680_LOCK_SWITCH 12
47 #define GPIO15_E6_LOCK_SWITCH 15
48 #define GPIO50_nCAM_EN 50
49 #define GPIO19_GEN1_CAM_RST 19
50 #define GPIO28_GEN2_CAM_RST 28
51
52 static struct platform_pwm_backlight_data ezx_backlight_data = {
53 .pwm_id = 0,
54 .max_brightness = 1023,
55 .dft_brightness = 1023,
56 .pwm_period_ns = 78770,
57 };
58
59 static struct platform_device ezx_backlight_device = {
60 .name = "pwm-backlight",
61 .dev = {
62 .parent = &pxa27x_device_pwm0.dev,
63 .platform_data = &ezx_backlight_data,
64 },
65 };
66
67 static struct pxafb_mode_info mode_ezx_old = {
68 .pixclock = 150000,
69 .xres = 240,
70 .yres = 320,
71 .bpp = 16,
72 .hsync_len = 10,
73 .left_margin = 20,
74 .right_margin = 10,
75 .vsync_len = 2,
76 .upper_margin = 3,
77 .lower_margin = 2,
78 .sync = 0,
79 };
80
81 static struct pxafb_mach_info ezx_fb_info_1 = {
82 .modes = &mode_ezx_old,
83 .num_modes = 1,
84 .lcd_conn = LCD_COLOR_TFT_16BPP,
85 };
86
87 static struct pxafb_mode_info mode_72r89803y01 = {
88 .pixclock = 192308,
89 .xres = 240,
90 .yres = 320,
91 .bpp = 32,
92 .depth = 18,
93 .hsync_len = 10,
94 .left_margin = 20,
95 .right_margin = 10,
96 .vsync_len = 2,
97 .upper_margin = 3,
98 .lower_margin = 2,
99 .sync = 0,
100 };
101
102 static struct pxafb_mach_info ezx_fb_info_2 = {
103 .modes = &mode_72r89803y01,
104 .num_modes = 1,
105 .lcd_conn = LCD_COLOR_TFT_18BPP,
106 };
107
108 static struct platform_device *ezx_devices[] __initdata = {
109 &ezx_backlight_device,
110 };
111
112 static unsigned long ezx_pin_config[] __initdata = {
113 /* PWM backlight */
114 GPIO16_PWM0_OUT,
115
116 /* BTUART */
117 GPIO42_BTUART_RXD,
118 GPIO43_BTUART_TXD,
119 GPIO44_BTUART_CTS,
120 GPIO45_BTUART_RTS,
121
122 /* I2C */
123 GPIO117_I2C_SCL,
124 GPIO118_I2C_SDA,
125
126 /* PCAP SSP */
127 GPIO29_SSP1_SCLK,
128 GPIO25_SSP1_TXD,
129 GPIO26_SSP1_RXD,
130 GPIO24_GPIO, /* pcap chip select */
131 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
132 GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
133 GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
134
135 /* MMC */
136 GPIO32_MMC_CLK,
137 GPIO92_MMC_DAT_0,
138 GPIO109_MMC_DAT_1,
139 GPIO110_MMC_DAT_2,
140 GPIO111_MMC_DAT_3,
141 GPIO112_MMC_CMD,
142 GPIO11_GPIO, /* mmc detect */
143
144 /* usb to external transceiver */
145 GPIO34_USB_P2_2,
146 GPIO35_USB_P2_1,
147 GPIO36_USB_P2_4,
148 GPIO39_USB_P2_6,
149 GPIO40_USB_P2_5,
150 GPIO53_USB_P2_3,
151
152 /* usb to Neptune GSM chip */
153 GPIO30_USB_P3_2,
154 GPIO31_USB_P3_6,
155 GPIO90_USB_P3_5,
156 GPIO91_USB_P3_1,
157 GPIO56_USB_P3_4,
158 GPIO113_USB_P3_3,
159 };
160
161 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
162 static unsigned long gen1_pin_config[] __initdata = {
163 /* flip / lockswitch */
164 GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
165
166 /* bluetooth (bcm2035) */
167 GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
168 GPIO48_GPIO, /* RESET */
169 GPIO28_GPIO, /* WAKEUP */
170
171 /* Neptune handshake */
172 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
173 GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
174 GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
175 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
176 GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
177 GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
178
179 /* sound */
180 GPIO52_SSP3_SCLK,
181 GPIO83_SSP3_SFRM,
182 GPIO81_SSP3_TXD,
183 GPIO89_SSP3_RXD,
184
185 /* ssp2 pins to in */
186 GPIO22_GPIO, /* SSP2_SCLK */
187 GPIO37_GPIO, /* SSP2_SFRM */
188 GPIO38_GPIO, /* SSP2_TXD */
189 GPIO88_GPIO, /* SSP2_RXD */
190
191 /* camera */
192 GPIO23_CIF_MCLK,
193 GPIO54_CIF_PCLK,
194 GPIO85_CIF_LV,
195 GPIO84_CIF_FV,
196 GPIO27_CIF_DD_0,
197 GPIO114_CIF_DD_1,
198 GPIO51_CIF_DD_2,
199 GPIO115_CIF_DD_3,
200 GPIO95_CIF_DD_4,
201 GPIO94_CIF_DD_5,
202 GPIO17_CIF_DD_6,
203 GPIO108_CIF_DD_7,
204 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
205 GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
206
207 /* EMU */
208 GPIO120_GPIO, /* EMU_MUX1 */
209 GPIO119_GPIO, /* EMU_MUX2 */
210 GPIO86_GPIO, /* SNP_INT_CTL */
211 GPIO87_GPIO, /* SNP_INT_IN */
212 };
213 #endif
214
215 #if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
216 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
217 static unsigned long gen2_pin_config[] __initdata = {
218 /* flip / lockswitch */
219 GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
220
221 /* EOC */
222 GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
223
224 /* bluetooth (bcm2045) */
225 GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
226 GPIO37_GPIO, /* RESET */
227 GPIO57_GPIO, /* WAKEUP */
228
229 /* Neptune handshake */
230 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
231 GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
232 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
233 GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
234 GPIO41_GPIO, /* BP_FLASH */
235
236 /* sound */
237 GPIO52_SSP3_SCLK,
238 GPIO83_SSP3_SFRM,
239 GPIO81_SSP3_TXD,
240 GPIO82_SSP3_RXD,
241
242 /* ssp2 pins to in */
243 GPIO22_GPIO, /* SSP2_SCLK */
244 GPIO14_GPIO, /* SSP2_SFRM */
245 GPIO38_GPIO, /* SSP2_TXD */
246 GPIO88_GPIO, /* SSP2_RXD */
247
248 /* camera */
249 GPIO23_CIF_MCLK,
250 GPIO54_CIF_PCLK,
251 GPIO85_CIF_LV,
252 GPIO84_CIF_FV,
253 GPIO27_CIF_DD_0,
254 GPIO114_CIF_DD_1,
255 GPIO51_CIF_DD_2,
256 GPIO115_CIF_DD_3,
257 GPIO95_CIF_DD_4,
258 GPIO48_CIF_DD_5,
259 GPIO93_CIF_DD_6,
260 GPIO12_CIF_DD_7,
261 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
262 GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
263 GPIO17_GPIO, /* CAM_FLASH */
264 };
265 #endif
266
267 #ifdef CONFIG_MACH_EZX_A780
268 static unsigned long a780_pin_config[] __initdata = {
269 /* keypad */
270 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
271 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
272 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
273 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
274 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
275 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO103_KP_MKOUT_0,
277 GPIO104_KP_MKOUT_1,
278 GPIO105_KP_MKOUT_2,
279 GPIO106_KP_MKOUT_3,
280 GPIO107_KP_MKOUT_4,
281
282 /* attenuate sound */
283 GPIO96_GPIO,
284 };
285 #endif
286
287 #ifdef CONFIG_MACH_EZX_E680
288 static unsigned long e680_pin_config[] __initdata = {
289 /* keypad */
290 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
291 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
292 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
293 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
294 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
295 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
296 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
297 GPIO103_KP_MKOUT_0,
298 GPIO104_KP_MKOUT_1,
299 GPIO105_KP_MKOUT_2,
300 GPIO106_KP_MKOUT_3,
301
302 /* MIDI */
303 GPIO79_GPIO, /* VA_SEL_BUL */
304 GPIO80_GPIO, /* FLT_SEL_BUL */
305 GPIO78_GPIO, /* MIDI_RESET */
306 GPIO33_GPIO, /* MIDI_CS */
307 GPIO15_GPIO, /* MIDI_IRQ */
308 GPIO49_GPIO, /* MIDI_NPWE */
309 GPIO18_GPIO, /* MIDI_RDY */
310
311 /* leds */
312 GPIO46_GPIO,
313 GPIO47_GPIO,
314 };
315 #endif
316
317 #ifdef CONFIG_MACH_EZX_A1200
318 static unsigned long a1200_pin_config[] __initdata = {
319 /* keypad */
320 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
321 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
322 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
323 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
324 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
325 GPIO103_KP_MKOUT_0,
326 GPIO104_KP_MKOUT_1,
327 GPIO105_KP_MKOUT_2,
328 GPIO106_KP_MKOUT_3,
329 GPIO107_KP_MKOUT_4,
330 GPIO108_KP_MKOUT_5,
331 };
332 #endif
333
334 #ifdef CONFIG_MACH_EZX_A910
335 static unsigned long a910_pin_config[] __initdata = {
336 /* keypad */
337 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
338 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
339 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
340 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
341 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
342 GPIO103_KP_MKOUT_0,
343 GPIO104_KP_MKOUT_1,
344 GPIO105_KP_MKOUT_2,
345 GPIO106_KP_MKOUT_3,
346 GPIO107_KP_MKOUT_4,
347 GPIO108_KP_MKOUT_5,
348
349 /* WLAN */
350 GPIO89_GPIO, /* RESET */
351 GPIO33_GPIO, /* WAKEUP */
352 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
353
354 /* MMC CS */
355 GPIO20_GPIO,
356 };
357 #endif
358
359 #ifdef CONFIG_MACH_EZX_E2
360 static unsigned long e2_pin_config[] __initdata = {
361 /* keypad */
362 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
363 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
364 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
365 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
366 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
367 GPIO103_KP_MKOUT_0,
368 GPIO104_KP_MKOUT_1,
369 GPIO105_KP_MKOUT_2,
370 GPIO106_KP_MKOUT_3,
371 GPIO107_KP_MKOUT_4,
372 GPIO108_KP_MKOUT_5,
373 };
374 #endif
375
376 #ifdef CONFIG_MACH_EZX_E6
377 static unsigned long e6_pin_config[] __initdata = {
378 /* keypad */
379 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
380 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
381 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
382 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
383 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
384 GPIO103_KP_MKOUT_0,
385 GPIO104_KP_MKOUT_1,
386 GPIO105_KP_MKOUT_2,
387 GPIO106_KP_MKOUT_3,
388 GPIO107_KP_MKOUT_4,
389 GPIO108_KP_MKOUT_5,
390 };
391 #endif
392
393 /* KEYPAD */
394 #ifdef CONFIG_MACH_EZX_A780
395 static unsigned int a780_key_map[] = {
396 KEY(0, 0, KEY_SEND),
397 KEY(0, 1, KEY_BACK),
398 KEY(0, 2, KEY_END),
399 KEY(0, 3, KEY_PAGEUP),
400 KEY(0, 4, KEY_UP),
401
402 KEY(1, 0, KEY_NUMERIC_1),
403 KEY(1, 1, KEY_NUMERIC_2),
404 KEY(1, 2, KEY_NUMERIC_3),
405 KEY(1, 3, KEY_SELECT),
406 KEY(1, 4, KEY_KPENTER),
407
408 KEY(2, 0, KEY_NUMERIC_4),
409 KEY(2, 1, KEY_NUMERIC_5),
410 KEY(2, 2, KEY_NUMERIC_6),
411 KEY(2, 3, KEY_RECORD),
412 KEY(2, 4, KEY_LEFT),
413
414 KEY(3, 0, KEY_NUMERIC_7),
415 KEY(3, 1, KEY_NUMERIC_8),
416 KEY(3, 2, KEY_NUMERIC_9),
417 KEY(3, 3, KEY_HOME),
418 KEY(3, 4, KEY_RIGHT),
419
420 KEY(4, 0, KEY_NUMERIC_STAR),
421 KEY(4, 1, KEY_NUMERIC_0),
422 KEY(4, 2, KEY_NUMERIC_POUND),
423 KEY(4, 3, KEY_PAGEDOWN),
424 KEY(4, 4, KEY_DOWN),
425 };
426
427 static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
428 .matrix_key_rows = 5,
429 .matrix_key_cols = 5,
430 .matrix_key_map = a780_key_map,
431 .matrix_key_map_size = ARRAY_SIZE(a780_key_map),
432
433 .direct_key_map = { KEY_CAMERA },
434 .direct_key_num = 1,
435
436 .debounce_interval = 30,
437 };
438 #endif /* CONFIG_MACH_EZX_A780 */
439
440 #ifdef CONFIG_MACH_EZX_E680
441 static unsigned int e680_key_map[] = {
442 KEY(0, 0, KEY_UP),
443 KEY(0, 1, KEY_RIGHT),
444 KEY(0, 2, KEY_RESERVED),
445 KEY(0, 3, KEY_SEND),
446
447 KEY(1, 0, KEY_DOWN),
448 KEY(1, 1, KEY_LEFT),
449 KEY(1, 2, KEY_PAGEUP),
450 KEY(1, 3, KEY_PAGEDOWN),
451
452 KEY(2, 0, KEY_RESERVED),
453 KEY(2, 1, KEY_RESERVED),
454 KEY(2, 2, KEY_RESERVED),
455 KEY(2, 3, KEY_KPENTER),
456 };
457
458 static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
459 .matrix_key_rows = 3,
460 .matrix_key_cols = 4,
461 .matrix_key_map = e680_key_map,
462 .matrix_key_map_size = ARRAY_SIZE(e680_key_map),
463
464 .direct_key_map = {
465 KEY_CAMERA,
466 KEY_RESERVED,
467 KEY_RESERVED,
468 KEY_F1,
469 KEY_CANCEL,
470 KEY_F2,
471 },
472 .direct_key_num = 6,
473
474 .debounce_interval = 30,
475 };
476 #endif /* CONFIG_MACH_EZX_E680 */
477
478 #ifdef CONFIG_MACH_EZX_A1200
479 static unsigned int a1200_key_map[] = {
480 KEY(0, 0, KEY_RESERVED),
481 KEY(0, 1, KEY_RIGHT),
482 KEY(0, 2, KEY_PAGEDOWN),
483 KEY(0, 3, KEY_RESERVED),
484 KEY(0, 4, KEY_RESERVED),
485 KEY(0, 5, KEY_RESERVED),
486
487 KEY(1, 0, KEY_RESERVED),
488 KEY(1, 1, KEY_DOWN),
489 KEY(1, 2, KEY_CAMERA),
490 KEY(1, 3, KEY_RESERVED),
491 KEY(1, 4, KEY_RESERVED),
492 KEY(1, 5, KEY_RESERVED),
493
494 KEY(2, 0, KEY_RESERVED),
495 KEY(2, 1, KEY_KPENTER),
496 KEY(2, 2, KEY_RECORD),
497 KEY(2, 3, KEY_RESERVED),
498 KEY(2, 4, KEY_RESERVED),
499 KEY(2, 5, KEY_SELECT),
500
501 KEY(3, 0, KEY_RESERVED),
502 KEY(3, 1, KEY_UP),
503 KEY(3, 2, KEY_SEND),
504 KEY(3, 3, KEY_RESERVED),
505 KEY(3, 4, KEY_RESERVED),
506 KEY(3, 5, KEY_RESERVED),
507
508 KEY(4, 0, KEY_RESERVED),
509 KEY(4, 1, KEY_LEFT),
510 KEY(4, 2, KEY_PAGEUP),
511 KEY(4, 3, KEY_RESERVED),
512 KEY(4, 4, KEY_RESERVED),
513 KEY(4, 5, KEY_RESERVED),
514 };
515
516 static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
517 .matrix_key_rows = 5,
518 .matrix_key_cols = 6,
519 .matrix_key_map = a1200_key_map,
520 .matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
521
522 .debounce_interval = 30,
523 };
524 #endif /* CONFIG_MACH_EZX_A1200 */
525
526 #ifdef CONFIG_MACH_EZX_E6
527 static unsigned int e6_key_map[] = {
528 KEY(0, 0, KEY_RESERVED),
529 KEY(0, 1, KEY_RIGHT),
530 KEY(0, 2, KEY_PAGEDOWN),
531 KEY(0, 3, KEY_RESERVED),
532 KEY(0, 4, KEY_RESERVED),
533 KEY(0, 5, KEY_NEXTSONG),
534
535 KEY(1, 0, KEY_RESERVED),
536 KEY(1, 1, KEY_DOWN),
537 KEY(1, 2, KEY_PROG1),
538 KEY(1, 3, KEY_RESERVED),
539 KEY(1, 4, KEY_RESERVED),
540 KEY(1, 5, KEY_RESERVED),
541
542 KEY(2, 0, KEY_RESERVED),
543 KEY(2, 1, KEY_ENTER),
544 KEY(2, 2, KEY_CAMERA),
545 KEY(2, 3, KEY_RESERVED),
546 KEY(2, 4, KEY_RESERVED),
547 KEY(2, 5, KEY_WWW),
548
549 KEY(3, 0, KEY_RESERVED),
550 KEY(3, 1, KEY_UP),
551 KEY(3, 2, KEY_SEND),
552 KEY(3, 3, KEY_RESERVED),
553 KEY(3, 4, KEY_RESERVED),
554 KEY(3, 5, KEY_PLAYPAUSE),
555
556 KEY(4, 0, KEY_RESERVED),
557 KEY(4, 1, KEY_LEFT),
558 KEY(4, 2, KEY_PAGEUP),
559 KEY(4, 3, KEY_RESERVED),
560 KEY(4, 4, KEY_RESERVED),
561 KEY(4, 5, KEY_PREVIOUSSONG),
562 };
563
564 static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
565 .matrix_key_rows = 5,
566 .matrix_key_cols = 6,
567 .matrix_key_map = e6_key_map,
568 .matrix_key_map_size = ARRAY_SIZE(e6_key_map),
569
570 .debounce_interval = 30,
571 };
572 #endif /* CONFIG_MACH_EZX_E6 */
573
574 #ifdef CONFIG_MACH_EZX_A910
575 static unsigned int a910_key_map[] = {
576 KEY(0, 0, KEY_NUMERIC_6),
577 KEY(0, 1, KEY_RIGHT),
578 KEY(0, 2, KEY_PAGEDOWN),
579 KEY(0, 3, KEY_KPENTER),
580 KEY(0, 4, KEY_NUMERIC_5),
581 KEY(0, 5, KEY_CAMERA),
582
583 KEY(1, 0, KEY_NUMERIC_8),
584 KEY(1, 1, KEY_DOWN),
585 KEY(1, 2, KEY_RESERVED),
586 KEY(1, 3, KEY_F1), /* Left SoftKey */
587 KEY(1, 4, KEY_NUMERIC_STAR),
588 KEY(1, 5, KEY_RESERVED),
589
590 KEY(2, 0, KEY_NUMERIC_7),
591 KEY(2, 1, KEY_NUMERIC_9),
592 KEY(2, 2, KEY_RECORD),
593 KEY(2, 3, KEY_F2), /* Right SoftKey */
594 KEY(2, 4, KEY_BACK),
595 KEY(2, 5, KEY_SELECT),
596
597 KEY(3, 0, KEY_NUMERIC_2),
598 KEY(3, 1, KEY_UP),
599 KEY(3, 2, KEY_SEND),
600 KEY(3, 3, KEY_NUMERIC_0),
601 KEY(3, 4, KEY_NUMERIC_1),
602 KEY(3, 5, KEY_RECORD),
603
604 KEY(4, 0, KEY_NUMERIC_4),
605 KEY(4, 1, KEY_LEFT),
606 KEY(4, 2, KEY_PAGEUP),
607 KEY(4, 3, KEY_NUMERIC_POUND),
608 KEY(4, 4, KEY_NUMERIC_3),
609 KEY(4, 5, KEY_RESERVED),
610 };
611
612 static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
613 .matrix_key_rows = 5,
614 .matrix_key_cols = 6,
615 .matrix_key_map = a910_key_map,
616 .matrix_key_map_size = ARRAY_SIZE(a910_key_map),
617
618 .debounce_interval = 30,
619 };
620 #endif /* CONFIG_MACH_EZX_A910 */
621
622 #ifdef CONFIG_MACH_EZX_E2
623 static unsigned int e2_key_map[] = {
624 KEY(0, 0, KEY_NUMERIC_6),
625 KEY(0, 1, KEY_RIGHT),
626 KEY(0, 2, KEY_NUMERIC_9),
627 KEY(0, 3, KEY_NEXTSONG),
628 KEY(0, 4, KEY_NUMERIC_5),
629 KEY(0, 5, KEY_F1), /* Left SoftKey */
630
631 KEY(1, 0, KEY_NUMERIC_8),
632 KEY(1, 1, KEY_DOWN),
633 KEY(1, 2, KEY_RESERVED),
634 KEY(1, 3, KEY_PAGEUP),
635 KEY(1, 4, KEY_NUMERIC_STAR),
636 KEY(1, 5, KEY_F2), /* Right SoftKey */
637
638 KEY(2, 0, KEY_NUMERIC_7),
639 KEY(2, 1, KEY_KPENTER),
640 KEY(2, 2, KEY_RECORD),
641 KEY(2, 3, KEY_PAGEDOWN),
642 KEY(2, 4, KEY_BACK),
643 KEY(2, 5, KEY_NUMERIC_0),
644
645 KEY(3, 0, KEY_NUMERIC_2),
646 KEY(3, 1, KEY_UP),
647 KEY(3, 2, KEY_SEND),
648 KEY(3, 3, KEY_PLAYPAUSE),
649 KEY(3, 4, KEY_NUMERIC_1),
650 KEY(3, 5, KEY_SOUND), /* Music SoftKey */
651
652 KEY(4, 0, KEY_NUMERIC_4),
653 KEY(4, 1, KEY_LEFT),
654 KEY(4, 2, KEY_NUMERIC_POUND),
655 KEY(4, 3, KEY_PREVIOUSSONG),
656 KEY(4, 4, KEY_NUMERIC_3),
657 KEY(4, 5, KEY_RESERVED),
658 };
659
660 static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
661 .matrix_key_rows = 5,
662 .matrix_key_cols = 6,
663 .matrix_key_map = e2_key_map,
664 .matrix_key_map_size = ARRAY_SIZE(e2_key_map),
665
666 .debounce_interval = 30,
667 };
668 #endif /* CONFIG_MACH_EZX_E2 */
669
670 #ifdef CONFIG_MACH_EZX_A780
671 /* gpio_keys */
672 static struct gpio_keys_button a780_buttons[] = {
673 [0] = {
674 .code = SW_LID,
675 .gpio = GPIO12_A780_FLIP_LID,
676 .active_low = 0,
677 .desc = "A780 flip lid",
678 .type = EV_SW,
679 .wakeup = 1,
680 },
681 };
682
683 static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
684 .buttons = a780_buttons,
685 .nbuttons = ARRAY_SIZE(a780_buttons),
686 };
687
688 static struct platform_device a780_gpio_keys = {
689 .name = "gpio-keys",
690 .id = -1,
691 .dev = {
692 .platform_data = &a780_gpio_keys_platform_data,
693 },
694 };
695
696 /* camera */
a780_camera_init(void)697 static int a780_camera_init(void)
698 {
699 int err;
700
701 /*
702 * GPIO50_nCAM_EN is active low
703 * GPIO19_GEN1_CAM_RST is active on rising edge
704 */
705 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
706 if (err) {
707 pr_err("%s: Failed to request nCAM_EN\n", __func__);
708 goto fail;
709 }
710
711 err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
712 if (err) {
713 pr_err("%s: Failed to request CAM_RST\n", __func__);
714 goto fail_gpio_cam_rst;
715 }
716
717 gpio_direction_output(GPIO50_nCAM_EN, 1);
718 gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
719
720 return 0;
721
722 fail_gpio_cam_rst:
723 gpio_free(GPIO50_nCAM_EN);
724 fail:
725 return err;
726 }
727
a780_camera_power(struct device * dev,int on)728 static int a780_camera_power(struct device *dev, int on)
729 {
730 gpio_set_value(GPIO50_nCAM_EN, !on);
731 return 0;
732 }
733
a780_camera_reset(struct device * dev)734 static int a780_camera_reset(struct device *dev)
735 {
736 gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
737 msleep(10);
738 gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
739
740 return 0;
741 }
742
743 struct pxacamera_platform_data a780_pxacamera_platform_data = {
744 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
745 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
746 .mclk_10khz = 5000,
747 };
748
749 static struct i2c_board_info a780_camera_i2c_board_info = {
750 I2C_BOARD_INFO("mt9m111", 0x5d),
751 };
752
753 static struct soc_camera_link a780_iclink = {
754 .bus_id = 0,
755 .flags = SOCAM_SENSOR_INVERT_PCLK,
756 .i2c_adapter_id = 0,
757 .board_info = &a780_camera_i2c_board_info,
758 .power = a780_camera_power,
759 .reset = a780_camera_reset,
760 };
761
762 static struct platform_device a780_camera = {
763 .name = "soc-camera-pdrv",
764 .id = 0,
765 .dev = {
766 .platform_data = &a780_iclink,
767 },
768 };
769
770 static struct platform_device *a780_devices[] __initdata = {
771 &a780_gpio_keys,
772 };
773
a780_init(void)774 static void __init a780_init(void)
775 {
776 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
777 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
778 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
779
780 pxa_set_ffuart_info(NULL);
781 pxa_set_btuart_info(NULL);
782 pxa_set_stuart_info(NULL);
783
784 pxa_set_i2c_info(NULL);
785
786 pxa_set_fb_info(NULL, &ezx_fb_info_1);
787
788 pxa_set_keypad_info(&a780_keypad_platform_data);
789
790 if (a780_camera_init() == 0) {
791 pxa_set_camera_info(&a780_pxacamera_platform_data);
792 platform_device_register(&a780_camera);
793 }
794
795 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
796 platform_add_devices(ARRAY_AND_SIZE(a780_devices));
797 }
798
799 MACHINE_START(EZX_A780, "Motorola EZX A780")
800 .atag_offset = 0x100,
801 .map_io = pxa27x_map_io,
802 .nr_irqs = EZX_NR_IRQS,
803 .init_irq = pxa27x_init_irq,
804 .handle_irq = pxa27x_handle_irq,
805 .timer = &pxa_timer,
806 .init_machine = a780_init,
807 .restart = pxa_restart,
808 MACHINE_END
809 #endif
810
811 #ifdef CONFIG_MACH_EZX_E680
812 /* gpio_keys */
813 static struct gpio_keys_button e680_buttons[] = {
814 [0] = {
815 .code = KEY_SCREENLOCK,
816 .gpio = GPIO12_E680_LOCK_SWITCH,
817 .active_low = 0,
818 .desc = "E680 lock switch",
819 .type = EV_KEY,
820 .wakeup = 1,
821 },
822 };
823
824 static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
825 .buttons = e680_buttons,
826 .nbuttons = ARRAY_SIZE(e680_buttons),
827 };
828
829 static struct platform_device e680_gpio_keys = {
830 .name = "gpio-keys",
831 .id = -1,
832 .dev = {
833 .platform_data = &e680_gpio_keys_platform_data,
834 },
835 };
836
837 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
838 { I2C_BOARD_INFO("tea5767", 0x81) },
839 };
840
841 static struct platform_device *e680_devices[] __initdata = {
842 &e680_gpio_keys,
843 };
844
e680_init(void)845 static void __init e680_init(void)
846 {
847 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
848 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
849 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
850
851 pxa_set_ffuart_info(NULL);
852 pxa_set_btuart_info(NULL);
853 pxa_set_stuart_info(NULL);
854
855 pxa_set_i2c_info(NULL);
856 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
857
858 pxa_set_fb_info(NULL, &ezx_fb_info_1);
859
860 pxa_set_keypad_info(&e680_keypad_platform_data);
861
862 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
863 platform_add_devices(ARRAY_AND_SIZE(e680_devices));
864 }
865
866 MACHINE_START(EZX_E680, "Motorola EZX E680")
867 .atag_offset = 0x100,
868 .map_io = pxa27x_map_io,
869 .nr_irqs = EZX_NR_IRQS,
870 .init_irq = pxa27x_init_irq,
871 .handle_irq = pxa27x_handle_irq,
872 .timer = &pxa_timer,
873 .init_machine = e680_init,
874 .restart = pxa_restart,
875 MACHINE_END
876 #endif
877
878 #ifdef CONFIG_MACH_EZX_A1200
879 /* gpio_keys */
880 static struct gpio_keys_button a1200_buttons[] = {
881 [0] = {
882 .code = SW_LID,
883 .gpio = GPIO15_A1200_FLIP_LID,
884 .active_low = 0,
885 .desc = "A1200 flip lid",
886 .type = EV_SW,
887 .wakeup = 1,
888 },
889 };
890
891 static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
892 .buttons = a1200_buttons,
893 .nbuttons = ARRAY_SIZE(a1200_buttons),
894 };
895
896 static struct platform_device a1200_gpio_keys = {
897 .name = "gpio-keys",
898 .id = -1,
899 .dev = {
900 .platform_data = &a1200_gpio_keys_platform_data,
901 },
902 };
903
904 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
905 { I2C_BOARD_INFO("tea5767", 0x81) },
906 };
907
908 static struct platform_device *a1200_devices[] __initdata = {
909 &a1200_gpio_keys,
910 };
911
a1200_init(void)912 static void __init a1200_init(void)
913 {
914 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
915 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
916 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
917
918 pxa_set_ffuart_info(NULL);
919 pxa_set_btuart_info(NULL);
920 pxa_set_stuart_info(NULL);
921
922 pxa_set_i2c_info(NULL);
923 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
924
925 pxa_set_fb_info(NULL, &ezx_fb_info_2);
926
927 pxa_set_keypad_info(&a1200_keypad_platform_data);
928
929 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
930 platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
931 }
932
933 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
934 .atag_offset = 0x100,
935 .map_io = pxa27x_map_io,
936 .nr_irqs = EZX_NR_IRQS,
937 .init_irq = pxa27x_init_irq,
938 .handle_irq = pxa27x_handle_irq,
939 .timer = &pxa_timer,
940 .init_machine = a1200_init,
941 .restart = pxa_restart,
942 MACHINE_END
943 #endif
944
945 #ifdef CONFIG_MACH_EZX_A910
946 /* gpio_keys */
947 static struct gpio_keys_button a910_buttons[] = {
948 [0] = {
949 .code = SW_LID,
950 .gpio = GPIO15_A910_FLIP_LID,
951 .active_low = 0,
952 .desc = "A910 flip lid",
953 .type = EV_SW,
954 .wakeup = 1,
955 },
956 };
957
958 static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
959 .buttons = a910_buttons,
960 .nbuttons = ARRAY_SIZE(a910_buttons),
961 };
962
963 static struct platform_device a910_gpio_keys = {
964 .name = "gpio-keys",
965 .id = -1,
966 .dev = {
967 .platform_data = &a910_gpio_keys_platform_data,
968 },
969 };
970
971 /* camera */
a910_camera_init(void)972 static int a910_camera_init(void)
973 {
974 int err;
975
976 /*
977 * GPIO50_nCAM_EN is active low
978 * GPIO28_GEN2_CAM_RST is active on rising edge
979 */
980 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
981 if (err) {
982 pr_err("%s: Failed to request nCAM_EN\n", __func__);
983 goto fail;
984 }
985
986 err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
987 if (err) {
988 pr_err("%s: Failed to request CAM_RST\n", __func__);
989 goto fail_gpio_cam_rst;
990 }
991
992 gpio_direction_output(GPIO50_nCAM_EN, 1);
993 gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
994
995 return 0;
996
997 fail_gpio_cam_rst:
998 gpio_free(GPIO50_nCAM_EN);
999 fail:
1000 return err;
1001 }
1002
a910_camera_power(struct device * dev,int on)1003 static int a910_camera_power(struct device *dev, int on)
1004 {
1005 gpio_set_value(GPIO50_nCAM_EN, !on);
1006 return 0;
1007 }
1008
a910_camera_reset(struct device * dev)1009 static int a910_camera_reset(struct device *dev)
1010 {
1011 gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
1012 msleep(10);
1013 gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
1014
1015 return 0;
1016 }
1017
1018 struct pxacamera_platform_data a910_pxacamera_platform_data = {
1019 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
1020 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
1021 .mclk_10khz = 5000,
1022 };
1023
1024 static struct i2c_board_info a910_camera_i2c_board_info = {
1025 I2C_BOARD_INFO("mt9m111", 0x5d),
1026 };
1027
1028 static struct soc_camera_link a910_iclink = {
1029 .bus_id = 0,
1030 .i2c_adapter_id = 0,
1031 .board_info = &a910_camera_i2c_board_info,
1032 .power = a910_camera_power,
1033 .reset = a910_camera_reset,
1034 };
1035
1036 static struct platform_device a910_camera = {
1037 .name = "soc-camera-pdrv",
1038 .id = 0,
1039 .dev = {
1040 .platform_data = &a910_iclink,
1041 },
1042 };
1043
1044 /* leds-lp3944 */
1045 static struct lp3944_platform_data a910_lp3944_leds = {
1046 .leds_size = LP3944_LEDS_MAX,
1047 .leds = {
1048 [0] = {
1049 .name = "a910:red:",
1050 .status = LP3944_LED_STATUS_OFF,
1051 .type = LP3944_LED_TYPE_LED,
1052 },
1053 [1] = {
1054 .name = "a910:green:",
1055 .status = LP3944_LED_STATUS_OFF,
1056 .type = LP3944_LED_TYPE_LED,
1057 },
1058 [2] {
1059 .name = "a910:blue:",
1060 .status = LP3944_LED_STATUS_OFF,
1061 .type = LP3944_LED_TYPE_LED,
1062 },
1063 /* Leds 3 and 4 are used as display power switches */
1064 [3] = {
1065 .name = "a910::cli_display",
1066 .status = LP3944_LED_STATUS_OFF,
1067 .type = LP3944_LED_TYPE_LED_INVERTED
1068 },
1069 [4] = {
1070 .name = "a910::main_display",
1071 .status = LP3944_LED_STATUS_ON,
1072 .type = LP3944_LED_TYPE_LED_INVERTED
1073 },
1074 [5] = { .type = LP3944_LED_TYPE_NONE },
1075 [6] = {
1076 .name = "a910::torch",
1077 .status = LP3944_LED_STATUS_OFF,
1078 .type = LP3944_LED_TYPE_LED,
1079 },
1080 [7] = {
1081 .name = "a910::flash",
1082 .status = LP3944_LED_STATUS_OFF,
1083 .type = LP3944_LED_TYPE_LED_INVERTED,
1084 },
1085 },
1086 };
1087
1088 static struct i2c_board_info __initdata a910_i2c_board_info[] = {
1089 {
1090 I2C_BOARD_INFO("lp3944", 0x60),
1091 .platform_data = &a910_lp3944_leds,
1092 },
1093 };
1094
1095 static struct platform_device *a910_devices[] __initdata = {
1096 &a910_gpio_keys,
1097 };
1098
a910_init(void)1099 static void __init a910_init(void)
1100 {
1101 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1102 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1103 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
1104
1105 pxa_set_ffuart_info(NULL);
1106 pxa_set_btuart_info(NULL);
1107 pxa_set_stuart_info(NULL);
1108
1109 pxa_set_i2c_info(NULL);
1110 i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
1111
1112 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1113
1114 pxa_set_keypad_info(&a910_keypad_platform_data);
1115
1116 if (a910_camera_init() == 0) {
1117 pxa_set_camera_info(&a910_pxacamera_platform_data);
1118 platform_device_register(&a910_camera);
1119 }
1120
1121 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1122 platform_add_devices(ARRAY_AND_SIZE(a910_devices));
1123 }
1124
1125 MACHINE_START(EZX_A910, "Motorola EZX A910")
1126 .atag_offset = 0x100,
1127 .map_io = pxa27x_map_io,
1128 .nr_irqs = EZX_NR_IRQS,
1129 .init_irq = pxa27x_init_irq,
1130 .handle_irq = pxa27x_handle_irq,
1131 .timer = &pxa_timer,
1132 .init_machine = a910_init,
1133 .restart = pxa_restart,
1134 MACHINE_END
1135 #endif
1136
1137 #ifdef CONFIG_MACH_EZX_E6
1138 /* gpio_keys */
1139 static struct gpio_keys_button e6_buttons[] = {
1140 [0] = {
1141 .code = KEY_SCREENLOCK,
1142 .gpio = GPIO15_E6_LOCK_SWITCH,
1143 .active_low = 0,
1144 .desc = "E6 lock switch",
1145 .type = EV_KEY,
1146 .wakeup = 1,
1147 },
1148 };
1149
1150 static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
1151 .buttons = e6_buttons,
1152 .nbuttons = ARRAY_SIZE(e6_buttons),
1153 };
1154
1155 static struct platform_device e6_gpio_keys = {
1156 .name = "gpio-keys",
1157 .id = -1,
1158 .dev = {
1159 .platform_data = &e6_gpio_keys_platform_data,
1160 },
1161 };
1162
1163 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
1164 { I2C_BOARD_INFO("tea5767", 0x81) },
1165 };
1166
1167 static struct platform_device *e6_devices[] __initdata = {
1168 &e6_gpio_keys,
1169 };
1170
e6_init(void)1171 static void __init e6_init(void)
1172 {
1173 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1174 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1175 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
1176
1177 pxa_set_ffuart_info(NULL);
1178 pxa_set_btuart_info(NULL);
1179 pxa_set_stuart_info(NULL);
1180
1181 pxa_set_i2c_info(NULL);
1182 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
1183
1184 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1185
1186 pxa_set_keypad_info(&e6_keypad_platform_data);
1187
1188 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1189 platform_add_devices(ARRAY_AND_SIZE(e6_devices));
1190 }
1191
1192 MACHINE_START(EZX_E6, "Motorola EZX E6")
1193 .atag_offset = 0x100,
1194 .map_io = pxa27x_map_io,
1195 .nr_irqs = EZX_NR_IRQS,
1196 .init_irq = pxa27x_init_irq,
1197 .handle_irq = pxa27x_handle_irq,
1198 .timer = &pxa_timer,
1199 .init_machine = e6_init,
1200 .restart = pxa_restart,
1201 MACHINE_END
1202 #endif
1203
1204 #ifdef CONFIG_MACH_EZX_E2
1205 static struct i2c_board_info __initdata e2_i2c_board_info[] = {
1206 { I2C_BOARD_INFO("tea5767", 0x81) },
1207 };
1208
1209 static struct platform_device *e2_devices[] __initdata = {
1210 };
1211
e2_init(void)1212 static void __init e2_init(void)
1213 {
1214 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1215 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1216 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
1217
1218 pxa_set_ffuart_info(NULL);
1219 pxa_set_btuart_info(NULL);
1220 pxa_set_stuart_info(NULL);
1221
1222 pxa_set_i2c_info(NULL);
1223 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
1224
1225 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1226
1227 pxa_set_keypad_info(&e2_keypad_platform_data);
1228
1229 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1230 platform_add_devices(ARRAY_AND_SIZE(e2_devices));
1231 }
1232
1233 MACHINE_START(EZX_E2, "Motorola EZX E2")
1234 .atag_offset = 0x100,
1235 .map_io = pxa27x_map_io,
1236 .nr_irqs = EZX_NR_IRQS,
1237 .init_irq = pxa27x_init_irq,
1238 .handle_irq = pxa27x_handle_irq,
1239 .timer = &pxa_timer,
1240 .init_machine = e2_init,
1241 .restart = pxa_restart,
1242 MACHINE_END
1243 #endif
1244