1 /*
2  * common-board-devices.c
3  *
4  * Copyright (C) 2011 CompuLab, Ltd.
5  * Author: Mike Rapoport <mike@compulab.co.il>
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * version 2 as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
19  * 02110-1301 USA
20  *
21  */
22 
23 #include <linux/gpio.h>
24 #include <linux/spi/spi.h>
25 #include <linux/spi/ads7846.h>
26 
27 #include <plat/mcspi.h>
28 #include <plat/nand.h>
29 
30 #include "common-board-devices.h"
31 
32 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
33 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
34 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
35 	.turbo_mode	= 0,
36 	.single_channel	= 1,	/* 0: slave, 1: master */
37 };
38 
39 static struct ads7846_platform_data ads7846_config = {
40 	.x_max			= 0x0fff,
41 	.y_max			= 0x0fff,
42 	.x_plate_ohms		= 180,
43 	.pressure_max		= 255,
44 	.debounce_max		= 10,
45 	.debounce_tol		= 3,
46 	.debounce_rep		= 1,
47 	.gpio_pendown		= -EINVAL,
48 	.keep_vref_on		= 1,
49 };
50 
51 static struct spi_board_info ads7846_spi_board_info __initdata = {
52 	.modalias		= "ads7846",
53 	.bus_num		= -EINVAL,
54 	.chip_select		= 0,
55 	.max_speed_hz		= 1500000,
56 	.controller_data	= &ads7846_mcspi_config,
57 	.irq			= -EINVAL,
58 	.platform_data		= &ads7846_config,
59 };
60 
omap_ads7846_init(int bus_num,int gpio_pendown,int gpio_debounce,struct ads7846_platform_data * board_pdata)61 void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
62 			      struct ads7846_platform_data *board_pdata)
63 {
64 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
65 	int err;
66 
67 	if (board_pdata && board_pdata->get_pendown_state) {
68 		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
69 		if (err) {
70 			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
71 			return;
72 		}
73 		gpio_export(gpio_pendown, 0);
74 
75 		if (gpio_debounce)
76 			gpio_set_debounce(gpio_pendown, gpio_debounce);
77 	}
78 
79 	ads7846_config.gpio_pendown = gpio_pendown;
80 
81 	spi_bi->bus_num	= bus_num;
82 	spi_bi->irq	= OMAP_GPIO_IRQ(gpio_pendown);
83 
84 	if (board_pdata)
85 		spi_bi->platform_data = board_pdata;
86 
87 	spi_register_board_info(&ads7846_spi_board_info, 1);
88 }
89 #else
omap_ads7846_init(int bus_num,int gpio_pendown,int gpio_debounce,struct ads7846_platform_data * board_pdata)90 void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
91 			      struct ads7846_platform_data *board_pdata)
92 {
93 }
94 #endif
95 
96 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
97 static struct omap_nand_platform_data nand_data;
98 
omap_nand_flash_init(int options,struct mtd_partition * parts,int nr_parts)99 void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
100 				 int nr_parts)
101 {
102 	u8 cs = 0;
103 	u8 nandcs = GPMC_CS_NUM + 1;
104 
105 	/* find out the chip-select on which NAND exists */
106 	while (cs < GPMC_CS_NUM) {
107 		u32 ret = 0;
108 		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
109 
110 		if ((ret & 0xC00) == 0x800) {
111 			printk(KERN_INFO "Found NAND on CS%d\n", cs);
112 			if (nandcs > GPMC_CS_NUM)
113 				nandcs = cs;
114 		}
115 		cs++;
116 	}
117 
118 	if (nandcs > GPMC_CS_NUM) {
119 		printk(KERN_INFO "NAND: Unable to find configuration "
120 				 "in GPMC\n ");
121 		return;
122 	}
123 
124 	if (nandcs < GPMC_CS_NUM) {
125 		nand_data.cs = nandcs;
126 		nand_data.parts = parts;
127 		nand_data.nr_parts = nr_parts;
128 		nand_data.devsize = options;
129 
130 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
131 		if (gpmc_nand_init(&nand_data) < 0)
132 			printk(KERN_ERR "Unable to register NAND device\n");
133 	}
134 }
135 #else
omap_nand_flash_init(int options,struct mtd_partition * parts,int nr_parts)136 void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
137 				 int nr_parts)
138 {
139 }
140 #endif
141