1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
2  *
3  * This program is free software; you can redistribute it and/or modify
4  * it under the terms of the GNU General Public License version 2 and
5  * only version 2 as published by the Free Software Foundation.
6  *
7  * This program is distributed in the hope that it will be useful,
8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
10  * GNU General Public License for more details.
11  *
12  * You should have received a copy of the GNU General Public License
13  * along with this program; if not, write to the Free Software
14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15  * 02110-1301, USA.
16  */
17 #include <linux/gpio.h>
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/gpio.h>
21 #include <linux/platform_device.h>
22 #include <linux/delay.h>
23 #include <linux/io.h>
24 #include <linux/smsc911x.h>
25 #include <linux/usb/msm_hsusb.h>
26 #include <linux/clkdev.h>
27 #include <linux/memblock.h>
28 
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <asm/memory.h>
32 #include <asm/setup.h>
33 
34 #include <mach/board.h>
35 #include <mach/msm_iomap.h>
36 #include <mach/dma.h>
37 
38 #include <mach/vreg.h>
39 #include "devices.h"
40 #include "gpiomux.h"
41 #include "proc_comm.h"
42 
43 extern struct sys_timer msm_timer;
44 
msm7x30_fixup(struct tag * tag,char ** cmdline,struct meminfo * mi)45 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
46 		struct meminfo *mi)
47 {
48 	for (; tag->hdr.size; tag = tag_next(tag))
49 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
50 			tag->u.mem.start = 0;
51 			tag->u.mem.size += SZ_2M;
52 		}
53 }
54 
msm7x30_reserve(void)55 static void __init msm7x30_reserve(void)
56 {
57 	memblock_remove(0x0, SZ_2M);
58 }
59 
60 static int hsusb_phy_init_seq[] = {
61 	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
62 	0x02, 0x36,	/* Disable CDR Auto Reset feature */
63 	-1
64 };
65 
66 static struct msm_otg_platform_data msm_otg_pdata = {
67 	.phy_init_seq		= hsusb_phy_init_seq,
68 	.mode                   = USB_PERIPHERAL,
69 	.otg_control		= OTG_PHY_CONTROL,
70 };
71 
72 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
73 #ifdef CONFIG_SERIAL_MSM_CONSOLE
74 	[49] = { /* UART2 RFR */
75 		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
76 			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
77 	},
78 	[50] = { /* UART2 CTS */
79 		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
80 			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
81 	},
82 	[51] = { /* UART2 RX */
83 		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
84 			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
85 	},
86 	[52] = { /* UART2 TX */
87 		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
88 			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
89 	},
90 #endif
91 };
92 
93 static struct platform_device *devices[] __initdata = {
94 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
95         &msm_device_uart2,
96 #endif
97 	&msm_device_smd,
98 	&msm_device_otg,
99 	&msm_device_hsusb,
100 	&msm_device_hsusb_host,
101 };
102 
msm7x30_init_irq(void)103 static void __init msm7x30_init_irq(void)
104 {
105 	msm_init_irq();
106 }
107 
msm7x30_init(void)108 static void __init msm7x30_init(void)
109 {
110 	msm_device_otg.dev.platform_data = &msm_otg_pdata;
111 	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
112 	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
113 
114 	platform_add_devices(devices, ARRAY_SIZE(devices));
115 }
116 
msm7x30_map_io(void)117 static void __init msm7x30_map_io(void)
118 {
119 	msm_map_msm7x30_io();
120 	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
121 }
122 
123 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
124 	.atag_offset = 0x100,
125 	.fixup = msm7x30_fixup,
126 	.reserve = msm7x30_reserve,
127 	.map_io = msm7x30_map_io,
128 	.init_irq = msm7x30_init_irq,
129 	.init_machine = msm7x30_init,
130 	.timer = &msm_timer,
131 MACHINE_END
132 
133 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
134 	.atag_offset = 0x100,
135 	.fixup = msm7x30_fixup,
136 	.reserve = msm7x30_reserve,
137 	.map_io = msm7x30_map_io,
138 	.init_irq = msm7x30_init_irq,
139 	.init_machine = msm7x30_init,
140 	.timer = &msm_timer,
141 MACHINE_END
142 
143 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
144 	.atag_offset = 0x100,
145 	.fixup = msm7x30_fixup,
146 	.reserve = msm7x30_reserve,
147 	.map_io = msm7x30_map_io,
148 	.init_irq = msm7x30_init_irq,
149 	.init_machine = msm7x30_init,
150 	.timer = &msm_timer,
151 MACHINE_END
152