/linux/Documentation/devicetree/bindings/media/i2c/ |
H A D | sony,imx219.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor 10 - Dave Stevenson <dave.stevenson@raspberrypi.com> 12 description: |- 13 The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor 16 Image data is sent through MIPI CSI-2, which is configured as either 2 or 20 - $ref: /schemas/media/video-interface-devices.yaml# 33 VDIG-supply: [all …]
|
H A D | sony,imx258.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 12 description: |- 13 IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel 16 CSI-2. The sensor exists in two different models, a standard variant 17 (IMX258) and a variant with phase detection autofocus (IMX258-PDAF). 21 $ref: /schemas/media/video-interface-devices.yaml# 26 - sony,imx258 [all …]
|
H A D | sony,imx274.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor 10 - Leon Luo <leonl@leopardimaging.com> 13 The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an 15 Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 25 reset-gpios: 31 clock-names: 34 vana-supply: [all …]
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * DT Overlay for 4 x RPi Camera V2.1 on J722S-EVM board. 5 * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ 7 * Schematics: https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf 10 /dts-v1/; 13 #include <dt-bindings/gpio/gpio.h> 14 #include "k3-pinctrl.h" 17 cam0_reset_pins_default: cam0-default-reset-pins { 18 pinctrl-single,pins = < 23 cam1_reset_pins_default: cam1-default-reset-pins { [all …]
|
H A D | k3-j721e-sk-csi2-dual-imx219.dtso | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 4 * on J721E SK, AM68 SK or AM69-SK board. 5 * https://datasheets.raspberrypi.org/camera/camera-v2-schematic.pdf 7 * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ 10 /dts-v1/; 13 #include <dt-bindings/gpio/gpio.h> 14 #include "k3-pinctrl.h" 17 clk_imx219_fixed: imx219-xclk { 18 compatible = "fixed-clock"; 19 #clock-cells = <0>; [all …]
|
/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | ti,lmp92064.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Leonard Göhrs <l.goehrs@pengutronix.de> 22 - ti,lmp92064 27 vdd-supply: 30 vdig-supply: 34 shunt-resistor-micro-ohms: 40 reset-gpios: 44 - compatible [all …]
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | sm8150-sony-xperia-kumano.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 16 /delete-node/ &cdsp_mem; 17 /delete-node/ &gpu_mem; 18 /delete-node/ &ipa_fw_mem; 19 /delete-node/ &ipa_gsi_mem; 20 /delete-node/ &mpss_mem; [all …]
|
H A D | sm7325-nothing-spacewar.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 7 /dts-v1/; 9 #include <dt-bindings/arm/qcom,ids.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> 12 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> 13 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> 14 #include <dt-bindings/leds/common.h> 15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> [all …]
|
H A D | sdm630-sony-xperia-nile.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/input/gpio-keys.h> 13 #include <dt-bindings/leds/common.h> 17 qcom,msm-id = <318 0>; 18 qcom,board-id = <8 1>; 19 qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; 21 /* This part enables graphical output via bootloader-enabled display */ 25 #address-cells = <2>; [all …]
|
H A D | msm8998-sony-xperia-yoshino.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ 19 qcom,board-id = <8 0>; 23 compatible = "gpio-gate-clock"; 24 pinctrl-0 = <&div_clk1>; 25 pinctrl-names = "default"; 27 #clock-cells = <0>; [all …]
|
/linux/Documentation/devicetree/bindings/mfd/ |
H A D | ti,tps65910.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Shree Ramamoorthy <s-ramamoorthy@ti.com> 13 TPS65910 device is a Power Management IC that provides 3 step-down converters, 20 - ti,tps65910 21 - ti,tps65911 27 gpio-controller: true 29 '#gpio-cells': 38 interrupt-controller: true [all …]
|
/linux/arch/arm64/boot/dts/renesas/ |
H A D | aistarvision-mipi-adapter-2.1.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 10 compatible = "regulator-fixed"; 11 regulator-name = "camera_vdddo"; 12 regulator-min-microvolt = <1800000>; 13 regulator-max-microvolt = <1800000>; 14 regulator-always-on; 18 compatible = "regulator-fixed"; 19 regulator-name = "camera_vdda"; 20 regulator-min-microvolt = <2800000>; 21 regulator-max-microvolt = <2800000>; [all …]
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | motorola-cpcap-mapphone.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 10 interrupt-parent = <&gpio1>; 12 interrupt-controller; 13 #interrupt-cells = <2>; 14 #address-cells = <1>; 15 #size-cells = <0>; 16 spi-max-frequency = <9600000>; 17 spi-cs-high; 18 spi-cpol; 19 spi-cpha; [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 3 * Copyright 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, 4 * D-82229 Seefeld, Germany. 7 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/media/video-interfaces.h> 13 #include "imx8mp-pinfunc.h" 20 reg_cam: regulator-cam { 21 compatible = "regulator-fixed"; 22 regulator-name = "reg_cam"; [all …]
|
H A D | imx8mm-venice-gw73xx-0x-imx219.dtso | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 8 #include "imx8mm-pinfunc.h" 10 /dts-v1/; 14 compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; 16 reg_vana: regulator-2p8v { 17 compatible = "regulator-fixed"; 18 regulator-name = "2P8V"; 19 regulator-min-microvolt = <2800000>; 20 regulator-max-microvolt = <2800000>; [all …]
|
H A D | imx8mp-venice-gw74xx-imx219.dtso | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 8 #include "imx8mp-pinfunc.h" 10 /dts-v1/; 14 reg_vana: regulator-2p8v { 15 compatible = "regulator-fixed"; 16 regulator-name = "2P8V"; 17 regulator-min-microvolt = <2800000>; 18 regulator-max-microvolt = <2800000>; 21 reg_vddl: regulator-1p2v { [all …]
|
/linux/arch/riscv/boot/dts/microchip/ |
H A D | mpfs-beaglev-fire.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* Copyright (c) 2020-2021 Microchip Technology Inc */ 4 /dts-v1/; 6 #include <dt-bindings/gpio/gpio.h> 8 #include "mpfs-beaglev-fire-fabric.dtsi" 14 #address-cells = <2>; 15 #size-cells = <2>; 16 model = "BeagleBoard BeagleV-Fire"; 17 compatible = "beagle,beaglev-fire", "microchip,mpfs"; 28 stdout-path = "serial0:115200n8"; [all …]
|
/linux/arch/arm/boot/dts/st/ |
H A D | stm32mp153c-lxa-tac-gen3.dts | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) 3 * Copyright (C) 2020 STMicroelectronics - All Rights Reserved 8 /dts-v1/; 11 #include "stm32mp15xc-lxa-tac.dtsi" 15 compatible = "lxa,stm32mp153c-tac-gen3", "oct,stm32mp153x-osd32", "st,stm32mp153"; 18 compatible = "pwm-backlight"; 19 power-supply = <&v3v3>; 21 brightness-levels = <0 31 63 95 127 159 191 223 255>; 22 default-brightness-level = <7>; 26 reg_iobus_12v: regulator-iobus-12v { [all …]
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx51-digi-connectcore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 /dts-v1/; 10 model = "Digi ConnectCore CC(W)-MX51"; 11 compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&pinctrl_ecspi1>; 22 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&pinctrl_mc13892>; 29 spi-max-frequency = <16000000>; [all …]
|
H A D | imx51-zii-scu2-mezz.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 7 /dts-v1/; 13 compatible = "zii,imx51-scu2-mezz", "fsl,imx51"; 16 stdout-path = &uart1; 26 mdio-gpio0 = &mdio_gpio; 29 usb_vbus: regulator-usb-vbus { 30 compatible = "regulator-fixed"; 31 pinctrl-names = "default"; 32 pinctrl-0 = <&pinctrl_usb_mmc_reset>; 34 startup-delay-us = <150000>; [all …]
|
H A D | imx51-zii-scu3-esb.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 7 /dts-v1/; 13 compatible = "zii,imx51-scu3-esb", "fsl,imx51"; 16 stdout-path = &uart1; 25 usb_vbus: regulator-usb-vbus { 26 compatible = "regulator-fixed"; 27 regulator-name = "usb_vbus"; 28 regulator-min-microvolt = <5000000>; 29 regulator-max-microvolt = <5000000>; 31 pinctrl-names = "default"; [all …]
|
H A D | imx51-babbage.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 11 compatible = "fsl,imx51-babbage", "fsl,imx51"; 14 stdout-path = &uart1; 23 clock-frequency = <22579200>; 26 clk_osc: clk-osc { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <26000000>; 32 clk_osc_gate: clk-osc-gate { [all …]
|
H A D | imx51-zii-rdu1.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/sound/fsl-imx-audmux.h> 12 compatible = "zii,imx51-rdu1", "fsl,imx51"; 15 stdout-path = &uart1; 25 mdio-gpio0 = &mdio_gpio; 30 compatible = "fixed-clock"; 31 #clock-cells = <0>; 32 clock-frequency = <26000000>; 36 compatible = "gpio-gate-clock"; [all …]
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3399-pinephone-pro.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 9 * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf 12 /dts-v1/; 13 #include <dt-bindings/input/gpio-keys.h> 14 #include <dt-bindings/input/linux-event-codes.h> 15 #include <dt-bindings/leds/common.h> 16 #include "rk3399-s.dtsi" 20 compatible = "pine64,pinephone-pro", "rockchip,rk3399"; 21 chassis-type = "handset"; 30 stdout-path = "serial2:115200n8"; [all …]
|
/linux/drivers/media/i2c/ |
H A D | imx274.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * imx274.c - IMX274 CMOS Image Sensor driver 23 #include <linux/v4l2-mediabus.h> 26 #include <media/v4l2-ctrls.h> 27 #include <media/v4l2-device.h> 28 #include <media/v4l2-fwnode.h> 29 #include <media/v4l2-subdev.h> 49 #define IMX274_GAIN_SHIFT_MASK ((1 << IMX274_GAIN_SHIFT) - 1) 59 / (2048 - IMX274_GAIN_REG_MAX)) 76 * register SHR is limited to (SVR value + 1) x VMAX value - 4 [all …]
|