/linux-5.10/arch/powerpc/boot/dts/fsl/ |
D | p1020si-post.dtsi | 39 interrupts = <19 2 0 0>, 40 <16 2 0 0>; 43 /* controller at 0x9000 */ 49 bus-range = <0 255>; 51 interrupts = <16 2 0 0>; 53 pcie@0 { 54 reg = <0 0 0 0 0>; 59 interrupts = <16 2 0 0>; 60 interrupt-map-mask = <0xf800 0 0 7>; 62 /* IDSEL 0x0 */ [all …]
|
D | c293si-post.dtsi | 39 interrupts = <19 2 0 0>; 42 /* controller at 0xa000 */ 48 bus-range = <0 255>; 50 interrupts = <16 2 0 0>; 52 pcie@0 { 53 reg = <0 0 0 0 0>; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 61 /* IDSEL 0x0 */ 62 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 [all …]
|
D | c293pcie.dts | 46 reg = <0xf 0xffe1e000 0 0x2000>; 47 ranges = <0x0 0x0 0xf 0xec000000 0x04000000 48 0x1 0x0 0xf 0xff800000 0x00010000 49 0x2 0x0 0xf 0xffdf0000 0x00010000>; 54 ranges = <0x0 0xf 0xffe00000 0x100000>; 58 reg = <0xf 0xffe0a000 0 0x1000>; 59 ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 60 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; 61 pcie@0 { 62 ranges = <0x2000000 0x0 0x80000000 [all …]
|
D | b4si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 54 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 64 interrupts = <20 2 0 0>; 66 pcie@0 { 71 reg = <0 0 0 0 0>; 72 interrupts = <20 2 0 0>; [all …]
|
D | p4080si-post.dtsi | 37 alloc-ranges = <0 0 0x10 0>; 42 alloc-ranges = <0 0 0x10 0>; 47 alloc-ranges = <0 0 0x10 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ 68 pcie@0 { 69 reg = <0 0 0 0 0>; 75 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/linux-5.10/drivers/gpu/drm/nouveau/nvkm/engine/disp/ |
D | tu102.c | 40 if (nvkm_rd32(device, 0x6254e8) & 0x00000002) { in tu102_disp_init() 41 nvkm_mask(device, 0x6254e8, 0x00000001, 0x00000000); in tu102_disp_init() 43 if (!(nvkm_rd32(device, 0x6254e8) & 0x00000002)) in tu102_disp_init() 45 ) < 0) in tu102_disp_init() 50 tmp = 0x00000021; /*XXX*/ in tu102_disp_init() 51 nvkm_wr32(device, 0x640008, tmp); in tu102_disp_init() 54 for (i = 0; i < disp->sor.nr; i++) { in tu102_disp_init() 55 tmp = nvkm_rd32(device, 0x61c000 + (i * 0x800)); in tu102_disp_init() 56 nvkm_mask(device, 0x640000, 0x00000100 << i, 0x00000100 << i); in tu102_disp_init() 57 nvkm_wr32(device, 0x640144 + (i * 0x08), tmp); in tu102_disp_init() [all …]
|
/linux-5.10/drivers/gpu/drm/sun4i/ |
D | sun8i_mixer.h | 18 #define SUN8I_MIXER_GLOBAL_CTL 0x0 19 #define SUN8I_MIXER_GLOBAL_STATUS 0x4 20 #define SUN8I_MIXER_GLOBAL_DBUFF 0x8 21 #define SUN8I_MIXER_GLOBAL_SIZE 0xc 23 #define SUN8I_MIXER_GLOBAL_CTL_RT_EN BIT(0) 25 #define SUN8I_MIXER_GLOBAL_DBUFF_ENABLE BIT(0) 27 #define DE2_MIXER_UNIT_SIZE 0x6000 28 #define DE3_MIXER_UNIT_SIZE 0x3000 30 #define DE2_BLD_BASE 0x1000 31 #define DE2_CH_BASE 0x2000 [all …]
|
/linux-5.10/arch/arm/boot/dts/ |
D | bcm63138.dtsi | 23 #size-cells = <0>; 25 cpu@0 { 29 reg = <0>; 46 #clock-cells = <0>; 54 #clock-cells = <0>; 63 #clock-cells = <0>; 74 ranges = <0 0x80000000 0x784000>; 80 reg = <0x1d000 0x1000>; 86 interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; 91 reg = <0x1e000 0x100>; [all …]
|
/linux-5.10/drivers/net/ethernet/amd/ |
D | a2065.h | 19 * Publication #16907, Rev. B, Amendment/0, May 1994 50 #define LE_CSR0 0x0000 /* LANCE Controller Status */ 51 #define LE_CSR1 0x0001 /* IADR[15:0] */ 52 #define LE_CSR2 0x0002 /* IADR[23:16] */ 53 #define LE_CSR3 0x0003 /* Misc */ 60 #define LE_C0_ERR 0x8000 /* Error */ 61 #define LE_C0_BABL 0x4000 /* Babble: Transmitted too many bits */ 62 #define LE_C0_CERR 0x2000 /* No Heartbeat (10BASE-T) */ 63 #define LE_C0_MISS 0x1000 /* Missed Frame */ 64 #define LE_C0_MERR 0x0800 /* Memory Error */ [all …]
|
/linux-5.10/drivers/net/ipa/ |
D | ipa_data-sc7180.c | 55 .channel_id = 0, 114 .channel_id = 0, 130 * group 0: UL_DL 135 .limits[0] = { 142 .limits[0] = { 149 .limits[0] = { 156 .limits[0] = { 163 .limits[0] = { 173 .limits[0] = { 180 .limits[0] = { [all …]
|
D | ipa_uc.c | 36 /* Supports hardware interface version 0x2000 */ 89 IPA_UC_COMMAND_NO_OP = 0, 104 IPA_UC_RESPONSE_NO_OP = 0, 112 IPA_UC_EVENT_NO_OP = 0, 197 shared->command_param_hi = 0; in send_uc_command() 198 shared->response = 0; in send_uc_command() 199 shared->response_param = 0; in send_uc_command() 210 send_uc_command(ipa, IPA_UC_COMMAND_ERR_FATAL, 0); in ipa_uc_panic_notifier()
|
/linux-5.10/drivers/usb/misc/sisusbvga/ |
D | sisusb_init.h | 58 #define ModeText 0x00 59 #define ModeCGA 0x01 60 #define ModeEGA 0x02 61 #define ModeVGA 0x03 62 #define Mode15Bpp 0x04 63 #define Mode16Bpp 0x05 64 #define Mode24Bpp 0x06 65 #define Mode32Bpp 0x07 67 #define ModeTypeMask 0x07 68 #define IsTextMode 0x07 [all …]
|
/linux-5.10/drivers/clk/imx/ |
D | clk-pllv2.c | 17 #define MXC_PLL_DP_CTL 0x00 18 #define MXC_PLL_DP_CONFIG 0x04 19 #define MXC_PLL_DP_OP 0x08 20 #define MXC_PLL_DP_MFD 0x0C 21 #define MXC_PLL_DP_MFN 0x10 22 #define MXC_PLL_DP_MFNMINUS 0x14 23 #define MXC_PLL_DP_MFNPLUS 0x18 24 #define MXC_PLL_DP_HFS_OP 0x1C 25 #define MXC_PLL_DP_HFS_MFD 0x20 26 #define MXC_PLL_DP_HFS_MFN 0x24 [all …]
|
/linux-5.10/include/pcmcia/ |
D | ss.h | 24 #define SS_WRPROT 0x0001 25 #define SS_CARDLOCK 0x0002 26 #define SS_EJECTION 0x0004 27 #define SS_INSERTION 0x0008 28 #define SS_BATDEAD 0x0010 29 #define SS_BATWARN 0x0020 30 #define SS_READY 0x0040 31 #define SS_DETECT 0x0080 32 #define SS_POWERON 0x0100 33 #define SS_GPI 0x0200 [all …]
|
/linux-5.10/drivers/input/joystick/ |
D | maplecontrol.c | 38 (buttons & 0x0010 ? -1 : 0) + (buttons & 0x0020 ? 1 : 0)); in dc_pad_callback() 40 (buttons & 0x0040 ? -1 : 0) + (buttons & 0x0080 ? 1 : 0)); in dc_pad_callback() 42 (buttons & 0x1000 ? -1 : 0) + (buttons & 0x2000 ? 1 : 0)); in dc_pad_callback() 44 (buttons & 0x4000 ? -1 : 0) + (buttons & 0x8000 ? 1 : 0)); in dc_pad_callback() 46 input_report_key(dev, BTN_C, buttons & 0x0001); in dc_pad_callback() 47 input_report_key(dev, BTN_B, buttons & 0x0002); in dc_pad_callback() 48 input_report_key(dev, BTN_A, buttons & 0x0004); in dc_pad_callback() 49 input_report_key(dev, BTN_START, buttons & 0x0008); in dc_pad_callback() 50 input_report_key(dev, BTN_Z, buttons & 0x0100); in dc_pad_callback() 51 input_report_key(dev, BTN_Y, buttons & 0x0200); in dc_pad_callback() [all …]
|
/linux-5.10/drivers/cpufreq/ |
D | pasemi-cpufreq.c | 27 #define SDCASR_REG 0x0100 28 #define SDCASR_REG_STRIDE 0x1000 29 #define SDCPWR_CFGA0_REG 0x0100 30 #define SDCPWR_PWST0_REG 0x0000 31 #define SDCPWR_GIZTIME_REG 0x0440 34 #define SDCPWR_GIZTIME_GR 0x80000000 35 #define SDCPWR_GIZTIME_LONGLOCK 0x000000ff 38 #define SDCASR_OFFSET 0x120000 51 {0, 0, 0}, 52 {0, 1, 0}, [all …]
|
/linux-5.10/tools/testing/selftests/mount/ |
D | nosymfollow-test.c | 23 # define ST_NOSYMFOLLOW 0x2000 /* Do not follow symlinks */ 49 if (buf_len < 0) in vmaybe_write_file() 56 if (fd < 0) { in vmaybe_write_file() 64 if (written >= 0) { in vmaybe_write_file() 72 if (close(fd) != 0) in vmaybe_write_file() 99 if (unshare(CLONE_NEWUSER) != 0) in create_and_enter_ns() 103 write_file("/proc/self/uid_map", "0 %d 1", uid); in create_and_enter_ns() 104 write_file("/proc/self/gid_map", "0 %d 1", gid); in create_and_enter_ns() 106 if (setgid(0) != 0) in create_and_enter_ns() 107 die("setgid(0) failed %s\n", strerror(errno)); in create_and_enter_ns() [all …]
|
/linux-5.10/drivers/staging/comedi/drivers/ |
D | adv_pci1724.c | 23 * Subdevice 0 is the analog output. 31 * output's offset will be set somewhere near mid-range (0x2000) and 32 * its gain will be near maximum (0x3fff). 34 * There is really no difference between the board's documented 0-20mA 47 #define PCI1724_DAC_CTRL_REG 0x00 50 #define PCI1724_DAC_CTRL_MODE(x) (((x) & 0x3) << 14) 55 #define PCI1724_DAC_CTRL_DATA(x) (((x) & 0x3fff) << 0) 56 #define PCI1724_SYNC_CTRL_REG 0x04 58 #define PCI1724_SYNC_CTRL_SYN BIT(0) 59 #define PCI1724_EEPROM_CTRL_REG 0x08 [all …]
|
/linux-5.10/include/uapi/linux/ |
D | jffs2.h | 24 #define JFFS2_OLD_MAGIC_BITMASK 0x1984 25 #define JFFS2_MAGIC_BITMASK 0x1985 26 #define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */ 27 #define JFFS2_EMPTY_BITMASK 0xffff 28 #define JFFS2_DIRTY_BITMASK 0x0000 31 #define JFFS2_SUM_MAGIC 0x02851885 33 /* We only allow a single char for length, and 0xFF is empty flash so 41 #define JFFS2_COMPR_NONE 0x00 42 #define JFFS2_COMPR_ZERO 0x01 43 #define JFFS2_COMPR_RTIME 0x02 [all …]
|
/linux-5.10/drivers/scsi/ |
D | fdomain.h | 3 #define FDOMAIN_REGION_SIZE 0x10 4 #define FDOMAIN_BIOS_SIZE 0x2000 7 in_arbitration = 0x02, 8 in_selection = 0x04, 9 in_other = 0x08, 10 disconnect = 0x10, 11 aborted = 0x20, 12 sent_ident = 0x40, 16 #define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */ 18 #define BSTAT_BSY BIT(0) /* Busy */ [all …]
|
/linux-5.10/arch/x86/include/asm/ |
D | pci_x86.h | 17 if (0) \ 19 } while (0) 22 #define PCI_PROBE_BIOS 0x0001 23 #define PCI_PROBE_CONF1 0x0002 24 #define PCI_PROBE_CONF2 0x0004 25 #define PCI_PROBE_MMCONF 0x0008 26 #define PCI_PROBE_MASK 0x000f 27 #define PCI_PROBE_NOEARLY 0x0010 29 #define PCI_NO_CHECKS 0x0400 30 #define PCI_USE_PIRQ_MASK 0x0800 [all …]
|
/linux-5.10/drivers/net/fddi/skfp/ |
D | pmf.c | 49 #define AC_G 0x01 /* Get */ 50 #define AC_GR 0x02 /* Get/Set */ 51 #define AC_S 0x04 /* Set */ 52 #define AC_NA 0x08 53 #define AC_GROUP 0x10 /* Group */ 115 { SMT_P103C,AC_S, 0, "wS" } , 222 { SMT_P3212,AC_G, 0, "" } , 271 { SMT_P4046,AC_S, 0, "wS" } , 273 { 0, AC_GROUP } , 274 { 0 } [all …]
|
/linux-5.10/sound/soc/codecs/ |
D | rt715-sdw.c | 26 case 0x00e0 ... 0x00e5: in rt715_readable_register() 27 case 0x00ee ... 0x00ef: in rt715_readable_register() 28 case 0x00f0 ... 0x00f5: in rt715_readable_register() 29 case 0x00fe ... 0x00ff: in rt715_readable_register() 30 case 0x02e0: in rt715_readable_register() 31 case 0x02f0: in rt715_readable_register() 32 case 0x04e0: in rt715_readable_register() 33 case 0x04f0: in rt715_readable_register() 34 case 0x06e0: in rt715_readable_register() 35 case 0x06f0: in rt715_readable_register() [all …]
|
/linux-5.10/Documentation/filesystems/ext4/ |
D | inodes.rst | 24 is no inode 0. 40 * - 0x0 44 * - 0x2 48 * - 0x4 52 * - 0x8 58 * - 0xC 65 * - 0x10 72 * - 0x14 76 * - 0x18 80 * - 0x1A [all …]
|
/linux-5.10/drivers/net/wireless/intersil/orinoco/ |
D | hermes.h | 52 #define HERMES_MAGIC (0x7d1f) 57 #define HERMES_CMD (0x00) 58 #define HERMES_PARAM0 (0x02) 59 #define HERMES_PARAM1 (0x04) 60 #define HERMES_PARAM2 (0x06) 61 #define HERMES_STATUS (0x08) 62 #define HERMES_RESP0 (0x0A) 63 #define HERMES_RESP1 (0x0C) 64 #define HERMES_RESP2 (0x0E) 65 #define HERMES_INFOFID (0x10) [all …]
|