Lines Matching +full:lvds +full:- +full:decoder
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
6 #include <dt-bindings/pwm/pwm.h>
10 stdout-path = &lpuart1;
15 compatible = "pwm-backlight";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_gpio_bkl_on>;
18 brightness-levels = <0 45 63 88 119 158 203 255>;
19 default-brightness-level = <4>;
20 enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
21 /* TODO: hook-up to Apalis BKL1_PWM */
25 gpio_fan: gpio-fan {
26 compatible = "gpio-fan";
27 pinctrl-names = "default";
28 pinctrl-0 = <&pinctrl_gpio8>;
30 gpio-fan,speed-map = < 0 0
34 /* TODO: LVDS Panel */
38 /* TODO: PCIe Wi-Fi Reference Clock */
53 reg_ext_rgmii: regulator-ext-rgmii {
54 compatible = "regulator-fixed";
55 power-domains = <&pd IMX_SC_R_BOARD_R1>;
56 regulator-max-microvolt = <3300000>;
57 regulator-min-microvolt = <3300000>;
58 regulator-name = "VDD_EXT_RGMII (LDO1)";
60 regulator-state-mem {
61 regulator-off-in-suspend;
65 reg_module_3v3: regulator-module-3v3 {
66 compatible = "regulator-fixed";
67 regulator-max-microvolt = <3300000>;
68 regulator-min-microvolt = <3300000>;
69 regulator-name = "+V3.3";
72 reg_module_3v3_avdd: regulator-module-3v3-avdd {
73 compatible = "regulator-fixed";
74 regulator-max-microvolt = <3300000>;
75 regulator-min-microvolt = <3300000>;
76 regulator-name = "+V3.3_AUDIO";
79 reg_module_wifi: regulator-module-wifi {
80 compatible = "regulator-fixed";
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_wifi_pdn>;
84 enable-active-high;
85 regulator-always-on;
86 regulator-name = "wifi_pwrdn_fake_regulator";
87 regulator-settling-time-us = <100>;
90 reg_pcie_switch: regulator-pcie-switch {
91 compatible = "regulator-fixed";
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gpio7>;
95 enable-active-high;
96 regulator-max-microvolt = <1800000>;
97 regulator-min-microvolt = <1800000>;
98 regulator-name = "pcie_switch";
99 startup-delay-us = <100000>;
102 reg_usb_host_vbus: regulator-usb-host-vbus {
103 compatible = "regulator-fixed";
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_usbh_en>;
108 enable-active-high;
109 regulator-always-on;
110 regulator-max-microvolt = <5000000>;
111 regulator-min-microvolt = <5000000>;
112 regulator-name = "usb-host-vbus";
115 reg_usb_hsic: regulator-usb-hsic {
116 compatible = "regulator-fixed";
117 regulator-max-microvolt = <3000000>;
118 regulator-min-microvolt = <3000000>;
119 regulator-name = "usb-hsic-dummy";
122 reg_usb_phy: regulator-usb-hsic1 {
123 compatible = "regulator-fixed";
124 regulator-max-microvolt = <3000000>;
125 regulator-min-microvolt = <3000000>;
126 regulator-name = "usb-phy-dummy";
129 reg_vref_1v8: regulator-vref-1v8 {
130 compatible = "regulator-fixed";
131 regulator-name = "+V1.8";
132 regulator-min-microvolt = <1800000>;
133 regulator-max-microvolt = <1800000>;
136 reserved-memory {
137 #address-cells = <2>;
138 #size-cells = <2>;
141 decoder_boot: decoder-boot@84000000 {
143 no-map;
146 encoder1_boot: encoder1-boot@86000000 {
148 no-map;
151 encoder2_boot: encoder2-boot@86200000 {
153 no-map;
157 * reserved-memory layout
164 no-map;
169 no-map;
173 compatible = "shared-dma-pool";
175 no-map;
178 decoder_rpc: decoder-rpc@92000000 {
180 no-map;
185 no-map;
188 encoder1_rpc: encoder1-rpc@94400000 {
190 no-map;
193 encoder2_rpc: encoder2-rpc@94b00000 {
195 no-map;
200 compatible = "shared-dma-pool";
201 alloc-ranges = <0 0xc0000000 0 0x3c000000>;
202 linux,cma-default;
209 compatible = "simple-audio-card";
210 simple-audio-card,bitclock-master = <&dailink_master>;
211 simple-audio-card,format = "i2s";
212 simple-audio-card,frame-master = <&dailink_master>;
213 simple-audio-card,name = "apalis-imx8qm";
215 simple-audio-card,cpu {
216 sound-dai = <&sai1>;
219 dailink_master: simple-audio-card,codec {
220 sound-dai = <&sgtl5000>;
227 sound-spdif {
228 compatible = "fsl,imx-audio-spdif";
229 model = "imx-spdif";
230 spdif-controller = <&spdif0>;
231 spdif-in;
232 spdif-out;
236 compatible = "toradex,vf50-touchscreen";
237 interrupt-parent = <&lsio_gpio3>;
239 pinctrl-names = "idle", "default";
240 pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
241 pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>;
242 io-channels = <&adc1 2>, <&adc1 1>,
244 vf50-ts-min-pressure = <200>;
245 xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
246 xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>;
247 yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>;
248 ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>;
250 * NOTE: you must remove the pinctrl-adc1 from the adc1
259 fsl,asrc-rate = <48000>;
263 pinctrl-names = "default";
264 pinctrl-0 = <&pinctrl_adc0>;
268 pinctrl-names = "default";
269 pinctrl-0 = <&pinctrl_adc1>;
300 pinctrl-names = "default", "sleep";
301 pinctrl-0 = <&pinctrl_fec1>;
302 pinctrl-1 = <&pinctrl_fec1_sleep>;
303 fsl,magic-packet;
304 phy-handle = <ðphy0>;
305 phy-mode = "rgmii-id";
308 #address-cells = <1>;
309 #size-cells = <0>;
311 ethphy0: ethernet-phy@7 {
312 compatible = "ethernet-phy-ieee802.3-c22";
314 interrupt-parent = <&lsio_gpio1>;
316 micrel,led-mode = <0>;
317 reset-assert-us = <2>;
318 reset-deassert-us = <2>;
319 reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_flexcan1>;
332 pinctrl-names = "default";
333 pinctrl-0 = <&pinctrl_flexcan2>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_flexcan3>;
360 /* On-module I2C */
362 pinctrl-names = "default";
363 pinctrl-0 = <&pinctrl_lpi2c1>;
364 #address-cells = <1>;
365 #size-cells = <0>;
366 clock-frequency = <100000>;
370 usb-hub@8 {
373 pinctrl-names = "default";
374 pinctrl-0 = <&pinctrl_usb3503a>;
375 connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>;
376 initial-mode = <1>;
377 intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
378 refclk-frequency = <25000000>;
379 reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
383 sgtl5000: audio-codec@a {
386 assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
390 assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
392 pinctrl-names = "default";
393 pinctrl-0 = <&pinctrl_sgtl5000>;
394 #sound-dai-cells = <0>;
395 VDDA-supply = <®_module_3v3_avdd>;
396 VDDD-supply = <®_vref_1v8>;
397 VDDIO-supply = <®_module_3v3>;
403 pinctrl-names = "default";
404 pinctrl-0 = <&pinctrl_lpi2c2>;
405 #address-cells = <1>;
406 #size-cells = <0>;
407 clock-frequency = <100000>;
412 interrupt-parent = <&lsio_gpio4>;
414 pinctrl-names = "default";
415 pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
416 reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>; /* Apalis GPIO6 */
430 pinctrl-names = "default";
431 pinctrl-0 = <&pinctrl_lpi2c3>;
432 #address-cells = <1>;
433 #size-cells = <0>;
434 clock-frequency = <100000>;
449 pinctrl-names = "default";
450 pinctrl-0 = <&pinctrl_lpspi0>;
451 #address-cells = <1>;
452 #size-cells = <0>;
453 cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>;
458 pinctrl-names = "default";
459 pinctrl-0 = <&pinctrl_lpspi2>;
460 #address-cells = <1>;
461 #size-cells = <0>;
462 cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
467 pinctrl-names = "default";
468 pinctrl-0 = <&pinctrl_lpuart0>;
473 pinctrl-names = "default";
474 pinctrl-0 = <&pinctrl_lpuart1>;
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_lpuart2>;
485 pinctrl-names = "default";
486 pinctrl-0 = <&pinctrl_lpuart3>;
490 gpio-line-names = "MXM3_279",
521 gpio-line-names = "",
545 hdmi-ctrl-hog {
546 pinctrl-names = "default";
547 pinctrl-0 = <&pinctrl_hdmi_ctrl>;
548 gpio-hog;
550 line-name = "CONNECTOR_IS_HDMI";
552 output-high;
557 gpio-line-names = "",
590 pcie-wifi-hog {
591 pinctrl-names = "default";
592 pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
593 gpio-hog;
595 line-name = "PCIE_WIFI_CLK";
596 output-high;
601 gpio-line-names = "MXM3_191",
636 gpio-line-names = "MXM3_18",
665 pcie-sata-hog {
666 pinctrl-names = "default";
667 pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
668 gpio-hog;
670 line-name = "PCIE_SATA_CLK";
671 output-high;
676 gpio-line-names = "",
709 gpio-line-names = "",
735 pinctrl-names = "default";
736 pinctrl-0 = <&pinctrl_pwm0>;
737 #pwm-cells = <3>;
742 pinctrl-names = "default";
743 pinctrl-0 = <&pinctrl_pwm1>;
744 #pwm-cells = <3>;
749 pinctrl-names = "default";
750 pinctrl-0 = <&pinctrl_pwm2>;
751 #pwm-cells = <3>;
756 pinctrl-names = "default";
757 pinctrl-0 = <&pinctrl_pwm3>;
758 #pwm-cells = <3>;
776 /* TODO: On-module Wi-Fi */
782 assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
786 assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
787 pinctrl-names = "default";
788 pinctrl-0 = <&pinctrl_sai1>;
789 #sound-dai-cells = <0>;
795 assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
804 assigned-clock-parents = <&aud_pll_div0_lpcg 0>, <&aud_rec1_lpcg 0>;
805 assigned-clock-rates = <0>, <0>, <786432000>, <49152000>, <12288000>,
813 assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
816 assigned-clock-rates = <786432000>, <49152000>, <12288000>;
817 pinctrl-names = "default";
818 pinctrl-0 = <&pinctrl_spdif0>;
824 /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
841 phy-3p0-supply = <®_usb_phy>;
846 pinctrl-names = "default";
847 pinctrl-0 = <&pinctrl_usbotg1>;
848 adp-disable;
849 hnp-disable;
850 over-current-active-low;
851 power-active-high;
852 srp-disable;
855 /* On-module eMMC */
857 pinctrl-names = "default", "state_100mhz", "state_200mhz";
858 pinctrl-0 = <&pinctrl_usdhc1>;
859 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
860 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
861 bus-width = <8>;
862 non-removable;
868 pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
869 pinctrl-0 = <&pinctrl_usdhc2_4bit>,
872 pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>,
875 pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>,
878 pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>,
881 bus-width = <8>;
882 cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
883 no-1-8-v;
888 pinctrl-names = "default", "state_100mhz", "state_200mhz";
889 pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
890 pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>;
891 pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>;
892 bus-width = <4>;
893 cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
894 no-1-8-v;
899 compatible = "nxp,imx8qm-vpu";
905 memory-region = <&decoder_boot>, <&decoder_rpc>;
911 memory-region = <&encoder1_boot>, <&encoder1_rpc>;
917 memory-region = <&encoder2_boot>, <&encoder2_rpc>;
922 pinctrl-names = "default";
923 pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
999 /* On-module Wi-Fi_I2S_EN# */
1011 /* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */
1030 /* On-module ETH_RESET# */
1032 /* On-module ETH_INT# */
1036 pinctrl_fec1_sleep: fec1-sleepgrp {
1161 /* On-module HDMI_CTRL */
1166 /* On-module I2C */
1254 pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp {
1277 /* On-module PCIe_Wi-Fi */
1284 /* On-module PCIe_CLK_EN1 */
1289 /* On-module PCIe_CLK_EN2 */
1339 /* On-module RESET_MOCI#_DRV */
1344 /* On-module I2S SGTL5000 for Apalis Analogue Audio */
1362 /* On-module I2S SGTL5000 SYS_MCLK */
1399 /* On-module USB HSIC HUB (active) */
1405 /* On-module USB HSIC HUB (idle) */
1411 /* On-module USB HSIC HUB */
1413 fsl,pins = /* On-module HSIC_HUB_CONNECT */
1415 /* On-module HSIC_INT_N */
1417 /* On-module HSIC_RESET_N */
1434 /* On-module eMMC */
1450 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
1465 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
1493 /* On-module PMIC use */
1497 pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp {
1504 /* On-module PMIC use */
1508 pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp {
1515 /* On-module PMIC use */
1526 pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp {
1533 pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp {
1540 pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp {
1547 /* On-module PMIC use */
1551 pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp {
1566 /* On-module PMIC use */
1570 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1577 /* On-module PMIC use */
1581 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
1588 /* On-module PMIC use */
1592 /* On-module Wi-Fi */
1594 fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */
1596 /* On-module Wi-Fi_PCIE_W_DISABLE */
1601 fsl,pins = /* On-module Wi-Fi_POWER_DOWN */