Lines Matching full:usdhc

143  * The flag tells that the ESDHC controller is an USDHC block that is
155  * uSDHC: ADMA Length Mismatch Error occurs if the AHB read access is slow,
167  * uSDHC: Due to the I/O timing limit, for SDR mode, SD card clock can't
320 	{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
321 	{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
322 	{ .compatible = "fsl,imx6sll-usdhc", .data = &usdhc_imx6sll_data, },
323 	{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
324 	{ .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, },
325 	{ .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
326 	{ .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
327 	{ .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
328 	{ .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
551 			 * The usdhc register returns a wrong host version.  in esdhc_readw_le()
693 				 * tuning, when send tuning command, usdhc will  in esdhc_writew_le()
811 			 * The reset on usdhc fails to clear MIX_CTRL register.  in esdhc_writeb_le()
978 	 * i.MX uSDHC internally already uses a fixed optimized timing for  in usdhc_execute_tuning()
996 	/* IC suggest to reset USDHC before every tuning command */  in esdhc_prepare_tuning()
1136 	 * for the uSDHC loopback read clock  in esdhc_set_strobe_dll()
1243 	/* Doc Erratum: the uSDHC actual maximum timeout count is 1 << 29 */  in esdhc_get_max_timeout_count()
1315 		 * to zero if this usdhc is chosen to boot system. Change  in sdhci_esdhc_imx_hwinit()
1340 		 * ESDHC_VEND_SPEC2_EN_BUSY_IRQ, USDHC will generate a  in sdhci_esdhc_imx_hwinit()
1375 			 * the buffer read ready interrupt immediately. If usdhc send  in sdhci_esdhc_imx_hwinit()
1675 		 * Link usdhc specific mmc_host_ops execute_tuning function,  in sdhci_esdhc_imx_probe()