wireless/rtlwifi/wifi.h

1149 struct rtl_efuse {  struct
1150 	bool autoLoad_ok;
1151 	bool bootfromefuse;
1152 	u16 max_physical_size;
1154 	u8 efuse_map[2][EFUSE_MAX_LOGICAL_SIZE];
1155 	u16 efuse_usedbytes;
1156 	u8 efuse_usedpercentage;
1158 	bool efuse_re_pg_sec1flag;
1159 	u8 efuse_re_pg_data[8];
1162 	u8 autoload_failflag;
1163 	u8 autoload_status;
1165 	short epromtype;
1166 	u16 eeprom_vid;
1167 	u16 eeprom_did;
1168 	u16 eeprom_svid;
1169 	u16 eeprom_smid;
1170 	u8 eeprom_oemid;
1171 	u16 eeprom_channelplan;
1172 	u8 eeprom_version;
1173 	u8 board_type;
1174 	u8 external_pa;
1176 	u8 dev_addr[6];
1178 	bool txpwr_fromeprom;
1179 	u8 eeprom_crystalcap;
1180 	u8 eeprom_tssi[2];
1181 	u8 eeprom_tssi_5g[3][2]; /* for 5GL/5GM/5GH band. */
1182 	u8 eeprom_pwrlimit_ht20[CHANNEL_GROUP_MAX];
1183 	u8 eeprom_pwrlimit_ht40[CHANNEL_GROUP_MAX];
1184 	u8 eeprom_chnlarea_txpwr_cck[2][CHANNEL_GROUP_MAX_2G];
1185 	u8 eeprom_chnlarea_txpwr_ht40_1s[2][CHANNEL_GROUP_MAX];
1186 	u8 eeprom_chnlarea_txpwr_ht40_2sdiif[2][CHANNEL_GROUP_MAX];
1187 	u8 txpwrlevel_cck[2][CHANNEL_MAX_NUMBER_2G];
1188 	u8 txpwrlevel_ht40_1s[2][CHANNEL_MAX_NUMBER];	/*For HT 40MHZ pwr */
1189 	u8 txpwrlevel_ht40_2s[2][CHANNEL_MAX_NUMBER];	/*For HT 40MHZ pwr */
1191 	u8 internal_pa_5g[2];	/* pathA / pathB */
1192 	u8 eeprom_c9;
1193 	u8 eeprom_cc;
1196 	u8 eeprom_pwrgroup[2][3];
1197 	u8 pwrgroup_ht20[2][CHANNEL_MAX_NUMBER];
1198 	u8 pwrgroup_ht40[2][CHANNEL_MAX_NUMBER];
1200 	char txpwr_ht20diff[2][CHANNEL_MAX_NUMBER]; /*HT 20<->40 Pwr diff */
1202 	u8 txpwr_legacyhtdiff[2][CHANNEL_MAX_NUMBER];
1203 	u8 txpwr_safetyflag;			/* Band edge enable flag */
1204 	u16 eeprom_txpowerdiff;
1205 	u8 legacy_httxpowerdiff;	/* Legacy to HT rate power diff */
1206 	u8 antenna_txpwdiff[3];
1208 	u8 eeprom_regulatory;
1209 	u8 eeprom_thermalmeter;
1210 	u8 thermalmeter[2]; /*ThermalMeter, index 0 for RFIC0, 1 for RFIC1 */
1211 	u16 tssi_13dbm;
1212 	u8 crystalcap;		/* CrystalCap. */
1213 	u8 delta_iqk;
1214 	u8 delta_lck;
1216 	u8 legacy_ht_txpowerdiff;	/*Legacy to HT rate power diff */
1217 	bool apk_thermalmeterignore;
1219 	bool b1x1_recvcombine;
1220 	bool b1ss_support;
1223 	u8 channel_plan;
1638 #define rtl_efuse(rtlpriv)	(&((rtlpriv)->efuse))  macro