| #
026520a5
|
| 21-Apr-2024 |
Gordon Bergling <gbe@FreeBSD.org> |
wtap: Fix typos in kernel messages
- s/cant/can't/
MFC after: 1 week
|
| #
95ee2897
|
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
4d846d26
|
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
show more ...
|
| #
c0b65123
|
| 15-Aug-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
wtap: Implement IBSS mode on wtap(4)
For TSF and beacon generation, each STA has to start its local TSF timer and sends beacon frames when it reaches the state IEEE80211_S_RUN. The TSF timer will be
wtap: Implement IBSS mode on wtap(4)
For TSF and beacon generation, each STA has to start its local TSF timer and sends beacon frames when it reaches the state IEEE80211_S_RUN. The TSF timer will be used for IBSS merge and beacon frame transmission.
The TSF timer is kept in the HAL of wtap(4). It is working by continuously updating its value on timer interrupt simulated by callout_reset().
When receiving beacons, the STA will be merged into the IBSS if - the STA has the same SSID as the beacon sender - the STA's TSF timer is smaller than the beacon sender's TSF timer.
After the merging process, the younger STA will be in the IBSS created by the older STA and the younger STA stops sending beacon frames. So beacon frames will always be sent by the oldest STA in IBSS.
Sponsored by: Google, Inc. (GSoC 2022) Reviewed By: lwhsu, adrian Differential Revision: https://reviews.freebsd.org/D35841
show more ...
|
| #
f7f4ce2d
|
| 08-Jul-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
wtap(4): Rename interface name
The original interface created by wtap is named "wlan%d", which is the same as the name of the vap created by wlan(4) and cause ifconfig(8) may output like this:
wtap(4): Rename interface name
The original interface created by wtap is named "wlan%d", which is the same as the name of the vap created by wlan(4) and cause ifconfig(8) may output like this:
wlan0: parent interface: wlan0
Rename the interface created by wtap(4) to "wtap%d" to avoid confusing.
Reviewed by: adrian Sponsored by: Google, Inc. (GSoC 2022) Differential Revision: https://reviews.freebsd.org/D35751
show more ...
|
| #
cf337fcd
|
| 28-Jun-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
Remove store-only variable and unnecessary bzero()
- Remove the variable set but not used to fix build on -CURRENT - Remove bzero() on the space malloc'd with M_ZERO flag.
Signed-off-by: En-Wei Wu
Remove store-only variable and unnecessary bzero()
- Remove the variable set but not used to fix build on -CURRENT - Remove bzero() on the space malloc'd with M_ZERO flag.
Signed-off-by: En-Wei Wu <enweiwu@FreeBSD.org>
Sponsored by: Google, Inc. (GSoC 2022) Differential Revision: https://reviews.freebsd.org/D35624
show more ...
|
| #
0bd06892
|
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
wtap: clean up empty lines in .c and .h files
|
| #
026520a5
|
| 21-Apr-2024 |
Gordon Bergling <gbe@FreeBSD.org> |
wtap: Fix typos in kernel messages
- s/cant/can't/
MFC after: 1 week
|
| #
95ee2897
|
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
4d846d26
|
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
show more ...
|
| #
c0b65123
|
| 15-Aug-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
wtap: Implement IBSS mode on wtap(4)
For TSF and beacon generation, each STA has to start its local TSF timer and sends beacon frames when it reaches the state IEEE80211_S_RUN. The TSF timer will be
wtap: Implement IBSS mode on wtap(4)
For TSF and beacon generation, each STA has to start its local TSF timer and sends beacon frames when it reaches the state IEEE80211_S_RUN. The TSF timer will be used for IBSS merge and beacon frame transmission.
The TSF timer is kept in the HAL of wtap(4). It is working by continuously updating its value on timer interrupt simulated by callout_reset().
When receiving beacons, the STA will be merged into the IBSS if - the STA has the same SSID as the beacon sender - the STA's TSF timer is smaller than the beacon sender's TSF timer.
After the merging process, the younger STA will be in the IBSS created by the older STA and the younger STA stops sending beacon frames. So beacon frames will always be sent by the oldest STA in IBSS.
Sponsored by: Google, Inc. (GSoC 2022) Reviewed By: lwhsu, adrian Differential Revision: https://reviews.freebsd.org/D35841
show more ...
|
| #
f7f4ce2d
|
| 08-Jul-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
wtap(4): Rename interface name
The original interface created by wtap is named "wlan%d", which is the same as the name of the vap created by wlan(4) and cause ifconfig(8) may output like this:
wtap(4): Rename interface name
The original interface created by wtap is named "wlan%d", which is the same as the name of the vap created by wlan(4) and cause ifconfig(8) may output like this:
wlan0: parent interface: wlan0
Rename the interface created by wtap(4) to "wtap%d" to avoid confusing.
Reviewed by: adrian Sponsored by: Google, Inc. (GSoC 2022) Differential Revision: https://reviews.freebsd.org/D35751
show more ...
|
| #
cf337fcd
|
| 28-Jun-2022 |
En-Wei Wu <enweiwu@FreeBSD.org> |
Remove store-only variable and unnecessary bzero()
- Remove the variable set but not used to fix build on -CURRENT - Remove bzero() on the space malloc'd with M_ZERO flag.
Signed-off-by: En-Wei Wu
Remove store-only variable and unnecessary bzero()
- Remove the variable set but not used to fix build on -CURRENT - Remove bzero() on the space malloc'd with M_ZERO flag.
Signed-off-by: En-Wei Wu <enweiwu@FreeBSD.org>
Sponsored by: Google, Inc. (GSoC 2022) Differential Revision: https://reviews.freebsd.org/D35624
show more ...
|
| #
0bd06892
|
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
wtap: clean up empty lines in .c and .h files
|
| #
718cf2cc
|
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task.
The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
show more ...
|
| #
416ba5c7
|
| 22-Jun-2015 |
Navdeep Parhar <np@FreeBSD.org> |
Catch up with HEAD (r280229-r284686).
|
| #
37a48d40
|
| 28-May-2015 |
Glen Barber <gjb@FreeBSD.org> |
MFH: r282615-r283655
Sponsored by: The FreeBSD Foundation
|
| #
c8550c02
|
| 25-May-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Make net80211 drivers supply their device name to the net80211 layer, so that the latter doesn't need to go through struct ifnet to get their name.
Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
| #
38f1b189
|
| 26-Apr-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r234692
sys/amd64/include/cpufunc.h sys/amd64/include/fpu.h sys/amd64/amd64/fpu.c sys/amd64/vmm/vmm.c
- Add API to allow vmm FPU state init/save/restore.
FP stuff discussed with: kib
|
| #
8fa0b743
|
| 23-Jan-2012 |
Xin LI <delphij@FreeBSD.org> |
IFC @230489 (pending review).
|
| #
718cf2cc
|
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task.
The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
show more ...
|
| #
416ba5c7
|
| 22-Jun-2015 |
Navdeep Parhar <np@FreeBSD.org> |
Catch up with HEAD (r280229-r284686).
|
| #
37a48d40
|
| 28-May-2015 |
Glen Barber <gjb@FreeBSD.org> |
MFH: r282615-r283655
Sponsored by: The FreeBSD Foundation
|
| #
c8550c02
|
| 25-May-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Make net80211 drivers supply their device name to the net80211 layer, so that the latter doesn't need to go through struct ifnet to get their name.
Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
| #
38f1b189
|
| 26-Apr-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r234692
sys/amd64/include/cpufunc.h sys/amd64/include/fpu.h sys/amd64/amd64/fpu.c sys/amd64/vmm/vmm.c
- Add API to allow vmm FPU state init/save/restore.
FP stuff discussed with: kib
|