sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

uart(4): Add a concept of "unique" serial devices

FreeBSD detects serial ports twice: First, very early in the boot
process, in order to obtain a usable console; and second, during
the device probe/

uart(4): Add a concept of "unique" serial devices

FreeBSD detects serial ports twice: First, very early in the boot
process, in order to obtain a usable console; and second, during
the device probe/attach process. When a UART is discovered during
device probing, FreeBSD attempts to determine whether it is a
device which was already being used as a console; without this,
the console doesn't work in userland.

Unfortunately it's possible for a UART to be mapped to a different
location in memory when it is discovered on a bus than it has when
it is announced via the ACPI SPCR table; this breaks the matching
process, which relies on comparing bus addresses.

To address this, we introduce a concept of "unique" serial devices,
i.e. devices which are guaranteed to be present *only once* on any
system. If we discover one of these during device probing, we can
match it to a same-PCI-vendor-and-device-numbers console which was
announced via the ACPI SPCR table, regardless of the differing bus
addresses.

At present, the only unique serial device is the "Amazon PCI serial
device" (vendor 0x1d0f, device 0x8250) found in some EC2 instances.
This unbreaks the serial console on those systems.

Reviewed by: imp
MFC after: 3 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D34703

show more ...

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

uart(4): Add a concept of "unique" serial devices

FreeBSD detects serial ports twice: First, very early in the boot
process, in order to obtain a usable console; and second, during
the device probe/

uart(4): Add a concept of "unique" serial devices

FreeBSD detects serial ports twice: First, very early in the boot
process, in order to obtain a usable console; and second, during
the device probe/attach process. When a UART is discovered during
device probing, FreeBSD attempts to determine whether it is a
device which was already being used as a console; without this,
the console doesn't work in userland.

Unfortunately it's possible for a UART to be mapped to a different
location in memory when it is discovered on a bus than it has when
it is announced via the ACPI SPCR table; this breaks the matching
process, which relies on comparing bus addresses.

To address this, we introduce a concept of "unique" serial devices,
i.e. devices which are guaranteed to be present *only once* on any
system. If we discover one of these during device probing, we can
match it to a same-PCI-vendor-and-device-numbers console which was
announced via the ACPI SPCR table, regardless of the differing bus
addresses.

At present, the only unique serial device is the "Amazon PCI serial
device" (vendor 0x1d0f, device 0x8250) found in some EC2 instances.
This unbreaks the serial console on those systems.

Reviewed by: imp
MFC after: 3 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D34703

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r314270 through r314419.

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...

Catch up with HEAD (r280229-r284686).

Merge sync of head

Merge from head

MFH: r280643-r281852

Sponsored by: The FreeBSD Foundation

Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the

Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the registers at 4-byte
addresses meaning the value should be 2.

This patch fixes this for the pl011 when configured using the fdt. The
other drivers have a default value of 0 to keep this a no-op.

MFC after: 1 week

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767

Merge head up to r262222 (last merge was incomplete).

MFH@260917.

MFH: Tracking commit (r260891)

Sponsored by: The FreeBSD Foundation

Introduce grab and ungrab upcalls. When the kernel desires to grab the
console, it calls the grab functions. These functions should turn off
the RX interrupts, and any others that interfere. This mak

Introduce grab and ungrab upcalls. When the kernel desires to grab the
console, it calls the grab functions. These functions should turn off
the RX interrupts, and any others that interfere. This makes mountroot
prompt work again. If there's more generalized need other than
prompting, many of these routines should be expanded to do those new
things.

Should have been part of r260889, but waasn't due to command line typo.

Reviewed by: bde (with reservations)

show more ...

Plumb the cn_grab and cn_ungrab routines down into the uart
clients. Mask RX interrupts while grabbed on the atmel serial
driver. This UART interrupts every character. When interrupts are
enabled at

Plumb the cn_grab and cn_ungrab routines down into the uart
clients. Mask RX interrupts while grabbed on the atmel serial
driver. This UART interrupts every character. When interrupts are
enabled at the mountroot> prompt, this means the ISR eats the
characters. Rather than try to create a cooperative buffering system
for the low level kernel console, instead just mask out the ISR. For
NS8250 and decsendents this isn't needed, since interrupts only happen
after 14 or more characters (depending on the fifo settings). Plumb
such that these are optional so there's no change in behavior for all
the other UART clients. ddb worked on this platform because all
interrupts were disabled while it was running, so this problem wasn't
noticed. The mountroot> issue has been around for a very very long
time.

MFC after: 3 days

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r314270 through r314419.

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...