Kill ignore regshft flag

This flag was introduced to ignore bad firmware values. These were
present in older versions of EDK-II that many devices (both Ampere and
Amazon) used. QEMU also used this v

Kill ignore regshft flag

This flag was introduced to ignore bad firmware values. These were
present in older versions of EDK-II that many devices (both Ampere and
Amazon) used. QEMU also used this value, but fixed it. But since it's
tied to the firmware bug not the device name ID it doesn't make sense to
have it flagged there.

Sponsored by: Netflix
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D47947

show more ...

dev/uart: name uart_class_set DATA_SET macro UART_CLASS()

Use the macro "UART_CLASS()" for the newly created data set
'uart_class_set' as we do for other data sets.
This further hides the data set n

dev/uart: name uart_class_set DATA_SET macro UART_CLASS()

Use the macro "UART_CLASS()" for the newly created data set
'uart_class_set' as we do for other data sets.
This further hides the data set name.
Also add UART_CLASS for quicc, which was previously not done.

MFC after: 1 week
Improves: 949670f8f466 dev/uart: Use a linker set to find uart classes
Obtained from: jhb, https://github.com/freebsd/freebsd/commit/269e99ac86902127bfaee1500d8747a3c7be5912
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D43981

show more ...

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Use bool for one-bit wide bit-fields

A signed one-bit wide bit-field can take only the values 0 and -1. Clang
16 introduced a warning that "implicit truncation from 'int' to a
one-bit wide bit-field

Use bool for one-bit wide bit-fields

A signed one-bit wide bit-field can take only the values 0 and -1. Clang
16 introduced a warning that "implicit truncation from 'int' to a
one-bit wide bit-field changes value from 1 to -1". Fix the warnings by
using C99 bool.

Reported by: Clang 16
Reviewed by: emaste, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39705

show more ...

Remove unused uart_devclass.

Export a sysctl count of RX FIFO overrun events.

uart(4) backends currently detect RX FIFO overrun errors and report
them to the uart(4) core layer. They are then reported to the generic
TTY layer

Export a sysctl count of RX FIFO overrun events.

uart(4) backends currently detect RX FIFO overrun errors and report
them to the uart(4) core layer. They are then reported to the generic
TTY layer which promptly ignores them. As a result, there is
currently no good way to determine if a uart is experiencing RX FIFO
overruns. One could add a generic per-tty counter, but there did not
appear to be a good way to export those. Instead, add a sysctl under
the uart(4) sysctl tree to export the count of overruns.

Reviewed by: brooks
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24368

show more ...

MFHead @347527

Sponsored by: The FreeBSD Foundation

Add quirk for ignoring SPCR AccessWidth values on the PL011 UART

The SPCR table on the Lenovo HR330A Ampere eMAG server indicates 8-bit
access, but 32-bit access is required for the PL011 to work.

Add quirk for ignoring SPCR AccessWidth values on the PL011 UART

The SPCR table on the Lenovo HR330A Ampere eMAG server indicates 8-bit
access, but 32-bit access is required for the PL011 to work.

PL011 on SBSA platforms always supports 32-bit access (and that was
hardcoded here before my EC2 fix), let's use 32-bit access for PL011
and 32BIT interface types.

Tested by emaste on Ampere eMAG and Cavium/Marvell ThunderX2.

Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew, imp (earlier)
Differential Revision: https://reviews.freebsd.org/D19507

show more ...

Merge ^/head r338026 through r338297, and resolve conflicts.

Kill ignore regshft flag

This flag was introduced to ignore bad firmware values. These were
present in older versions of EDK-II that many devices (both Ampere and
Amazon) used. QEMU also used this v

Kill ignore regshft flag

This flag was introduced to ignore bad firmware values. These were
present in older versions of EDK-II that many devices (both Ampere and
Amazon) used. QEMU also used this value, but fixed it. But since it's
tied to the firmware bug not the device name ID it doesn't make sense to
have it flagged there.

Sponsored by: Netflix
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D47947

show more ...

dev/uart: name uart_class_set DATA_SET macro UART_CLASS()

Use the macro "UART_CLASS()" for the newly created data set
'uart_class_set' as we do for other data sets.
This further hides the data set n

dev/uart: name uart_class_set DATA_SET macro UART_CLASS()

Use the macro "UART_CLASS()" for the newly created data set
'uart_class_set' as we do for other data sets.
This further hides the data set name.
Also add UART_CLASS for quicc, which was previously not done.

MFC after: 1 week
Improves: 949670f8f466 dev/uart: Use a linker set to find uart classes
Obtained from: jhb, https://github.com/freebsd/freebsd/commit/269e99ac86902127bfaee1500d8747a3c7be5912
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D43981

show more ...

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Use bool for one-bit wide bit-fields

A signed one-bit wide bit-field can take only the values 0 and -1. Clang
16 introduced a warning that "implicit truncation from 'int' to a
one-bit wide bit-field

Use bool for one-bit wide bit-fields

A signed one-bit wide bit-field can take only the values 0 and -1. Clang
16 introduced a warning that "implicit truncation from 'int' to a
one-bit wide bit-field changes value from 1 to -1". Fix the warnings by
using C99 bool.

Reported by: Clang 16
Reviewed by: emaste, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39705

show more ...

Remove unused uart_devclass.

Export a sysctl count of RX FIFO overrun events.

uart(4) backends currently detect RX FIFO overrun errors and report
them to the uart(4) core layer. They are then reported to the generic
TTY layer

Export a sysctl count of RX FIFO overrun events.

uart(4) backends currently detect RX FIFO overrun errors and report
them to the uart(4) core layer. They are then reported to the generic
TTY layer which promptly ignores them. As a result, there is
currently no good way to determine if a uart is experiencing RX FIFO
overruns. One could add a generic per-tty counter, but there did not
appear to be a good way to export those. Instead, add a sysctl under
the uart(4) sysctl tree to export the count of overruns.

Reviewed by: brooks
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24368

show more ...

MFHead @347527

Sponsored by: The FreeBSD Foundation

Add quirk for ignoring SPCR AccessWidth values on the PL011 UART

The SPCR table on the Lenovo HR330A Ampere eMAG server indicates 8-bit
access, but 32-bit access is required for the PL011 to work.

Add quirk for ignoring SPCR AccessWidth values on the PL011 UART

The SPCR table on the Lenovo HR330A Ampere eMAG server indicates 8-bit
access, but 32-bit access is required for the PL011 to work.

PL011 on SBSA platforms always supports 32-bit access (and that was
hardcoded here before my EC2 fix), let's use 32-bit access for PL011
and 32BIT interface types.

Tested by emaste on Ampere eMAG and Cavium/Marvell ThunderX2.

Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew, imp (earlier)
Differential Revision: https://reviews.freebsd.org/D19507

show more ...

Merge ^/head r338026 through r338297, and resolve conflicts.

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to wor

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)

Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r314270 through r314419.

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...

MFH @r294567