| #
64ecfc27
|
| 16-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So ad
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So add a flag to the descriptor setup path
to indicate that indeed this particular rate should be forced,
rather than rely on the firmware rate control.
This is currently a no-op as firmware rate control isn't working
in-tree, but it is working for me locally with other changes.
Without this, there's no way to force low rates for management,
DHCP traffic, and to allow fixed rate via "ifconfig wlanX ucastrate Y"
to function.
Locally tested:
* RTL8192CU, STA mode (firmware and driver/net80211 rate control)
Differential Revision: https://reviews.freebsd.org/D48100
Reviewed by: bz, gavin
show more ...
|
| #
9efd2154
|
| 13-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled.
Instead of making assumptions in the if_rtwn beacon routines (and
honestly all of that should be in the HAL too), create a HAL method
for enabling/disabling beacon processing specifically in STA mode.
Since this isn't necessarily required for all NICs (notably the RTL8188E
NICs, where some will do firmware rate control and some will require
driver rate control), only enable it for the RTL8192CU and RT8192EU.
The RTL8188E and RTL8812/RTL8821 just have no-op routines for now.
Locally tested:
* RTL8192CU, STA mode
Differential Revision: https://reviews.freebsd.org/D48066
Reviewed by: bz
show more ...
|
| #
95ee2897
|
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
b3512b30
|
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
rtwn: clean up empty lines in .c and .h files
|
| #
64ecfc27
|
| 16-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So ad
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So add a flag to the descriptor setup path
to indicate that indeed this particular rate should be forced,
rather than rely on the firmware rate control.
This is currently a no-op as firmware rate control isn't working
in-tree, but it is working for me locally with other changes.
Without this, there's no way to force low rates for management,
DHCP traffic, and to allow fixed rate via "ifconfig wlanX ucastrate Y"
to function.
Locally tested:
* RTL8192CU, STA mode (firmware and driver/net80211 rate control)
Differential Revision: https://reviews.freebsd.org/D48100
Reviewed by: bz, gavin
show more ...
|
| #
9efd2154
|
| 13-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled.
Instead of making assumptions in the if_rtwn beacon routines (and
honestly all of that should be in the HAL too), create a HAL method
for enabling/disabling beacon processing specifically in STA mode.
Since this isn't necessarily required for all NICs (notably the RTL8188E
NICs, where some will do firmware rate control and some will require
driver rate control), only enable it for the RTL8192CU and RT8192EU.
The RTL8188E and RTL8812/RTL8821 just have no-op routines for now.
Locally tested:
* RTL8192CU, STA mode
Differential Revision: https://reviews.freebsd.org/D48066
Reviewed by: bz
show more ...
|
| #
95ee2897
|
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
b3512b30
|
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
rtwn: clean up empty lines in .c and .h files
|
| #
9b3ece1c
|
| 04-Feb-2017 |
Enji Cooper <ngie@FreeBSD.org> |
MFhead@r313243
|
| #
a4aa656a
|
| 22-Jan-2017 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r312309 through r312623.
|
| #
09606165
|
| 17-Jan-2017 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
* IEEE80211_RX_F_SHORTGI;
- rate flags (CCK, OFDM, HT);
- width;
- phytype;
- rate;
- rx_tsf;
- rssi;
- nf;
- ieee, freq (RTL8188EU only, when ht40 support is disabled).
Tested with:
- RTL8188CE, RTL8188EU, RTL8821AU (STA / AP modes, i386)
- (by kevlo) RTL8188EU and RTL8812AU (amd64)
Reviewed by: adrian (previous version), kevlo
Differential Revision: https://reviews.freebsd.org/D9021
show more ...
|
| #
5763f796
|
| 21-Oct-2016 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r307383 through r307735.
|
| #
7453645f
|
| 17-Oct-2016 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- m
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
show more ...
|
| #
9b3ece1c
|
| 04-Feb-2017 |
Enji Cooper <ngie@FreeBSD.org> |
MFhead@r313243
|
| #
a4aa656a
|
| 22-Jan-2017 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r312309 through r312623.
|
| #
09606165
|
| 17-Jan-2017 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
* IEEE80211_RX_F_SHORTGI;
- rate flags (CCK, OFDM, HT);
- width;
- phytype;
- rate;
- rx_tsf;
- rssi;
- nf;
- ieee, freq (RTL8188EU only, when ht40 support is disabled).
Tested with:
- RTL8188CE, RTL8188EU, RTL8821AU (STA / AP modes, i386)
- (by kevlo) RTL8188EU and RTL8812AU (amd64)
Reviewed by: adrian (previous version), kevlo
Differential Revision: https://reviews.freebsd.org/D9021
show more ...
|
| #
5763f796
|
| 21-Oct-2016 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r307383 through r307735.
|
| #
7453645f
|
| 17-Oct-2016 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- m
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
show more ...
|
| #
64ecfc27
|
| 16-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So ad
rtwn: add forcerate flag to TX descriptor setup
When doing firmware rate control there will be situations where
the rate being passed in needs to actually override the rate
control selection. So add a flag to the descriptor setup path
to indicate that indeed this particular rate should be forced,
rather than rely on the firmware rate control.
This is currently a no-op as firmware rate control isn't working
in-tree, but it is working for me locally with other changes.
Without this, there's no way to force low rates for management,
DHCP traffic, and to allow fixed rate via "ifconfig wlanX ucastrate Y"
to function.
Locally tested:
* RTL8192CU, STA mode (firmware and driver/net80211 rate control)
Differential Revision: https://reviews.freebsd.org/D48100
Reviewed by: bz, gavin
show more ...
|
| #
9efd2154
|
| 13-Dec-2024 |
Adrian Chadd <adrian@FreeBSD.org> |
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled
rtwn: create a new HAL routine for enabling STA mode beacon processing
For some NICs (notably the rtl8192cu that I'm working on) the
firmware rate adaptation requires beacon processing to be enabled.
Instead of making assumptions in the if_rtwn beacon routines (and
honestly all of that should be in the HAL too), create a HAL method
for enabling/disabling beacon processing specifically in STA mode.
Since this isn't necessarily required for all NICs (notably the RTL8188E
NICs, where some will do firmware rate control and some will require
driver rate control), only enable it for the RTL8192CU and RT8192EU.
The RTL8188E and RTL8812/RTL8821 just have no-op routines for now.
Locally tested:
* RTL8192CU, STA mode
Differential Revision: https://reviews.freebsd.org/D48066
Reviewed by: bz
show more ...
|
| #
95ee2897
|
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
b3512b30
|
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
rtwn: clean up empty lines in .c and .h files
|
| #
9b3ece1c
|
| 04-Feb-2017 |
Enji Cooper <ngie@FreeBSD.org> |
MFhead@r313243
|
| #
a4aa656a
|
| 22-Jan-2017 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r312309 through r312623.
|
| #
09606165
|
| 17-Jan-2017 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
* IEEE80211_RX_F_SHORTGI;
- rate flags (CCK, OFDM, HT);
- width;
- phytype;
- rate;
- rx_tsf;
- rssi;
- nf;
- ieee, freq (RTL8188EU only, when ht40 support is disabled).
Tested with:
- RTL8188CE, RTL8188EU, RTL8821AU (STA / AP modes, i386)
- (by kevlo) RTL8188EU and RTL8812AU (amd64)
Reviewed by: adrian (previous version), kevlo
Differential Revision: https://reviews.freebsd.org/D9021
show more ...
|