qapi: Move include/qapi/qmp/ to include/qobject/

The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various histo

qapi: Move include/qapi/qmp/ to include/qobject/

The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.

This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.

This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]

show more ...

qemu-option: remove now-dead code

-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the n

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates

# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests: Move unit tests into a separate directory

The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsy

tests: Move unit tests into a separate directory

The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsystem. Let's clean up the mess and move the
unit tests to a separate directory.

Message-Id: <20210310063314.1049838-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

qemu-option: warn for short-form boolean options

Options such as "server" or "nowait", that are commonly found in -chardev,
are sugar for "server=on" and "wait=off". This is quite surprising and
al

qemu-option: warn for short-form boolean options

Options such as "server" or "nowait", that are commonly found in -chardev,
are sugar for "server=on" and "wait=off". This is quite surprising and
also does not have any notion of typing attached. It is even possible to
do "-device e1000,noid" and get a device with "id=off".

Deprecate it and print a warning when it is encountered. In general,
this short form for boolean options only seems to be in wide use for
-chardev and -spice.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qemu-option: restrict qemu_opts_set to merge-lists QemuOpts

qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are v

qemu-option: restrict qemu_opts_set to merge-lists QemuOpts

qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:

I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.

However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.

On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.

So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.

qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.

With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

tests: Use &error_abort where appropriate

Receiving the error in a local variable only to assert there is none
is less clear than passing &error_abort. Clean up.

Signed-off-by: Markus Armbruster <

tests: Use &error_abort where appropriate

Receiving the error in a local variable only to assert there is none
is less clear than passing &error_abort. Clean up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200630090351.1247703-5-armbru@redhat.com>

show more ...

test-qemu-opts: Simplify test_has_help_option() after bug fix

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.c

test-qemu-opts: Simplify test_has_help_option() after bug fix

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-6-armbru@redhat.com>

show more ...

qemu-option: Fix has_help_option()'s sloppy parsing

has_help_option() uses its own parser. It's inconsistent with
qemu_opts_parse(), as demonstrated by test-qemu-opts case
/qemu-opts/has_help_optio

qemu-option: Fix has_help_option()'s sloppy parsing

has_help_option() uses its own parser. It's inconsistent with
qemu_opts_parse(), as demonstrated by test-qemu-opts case
/qemu-opts/has_help_option. Fix by reusing the common parser.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

qemu-option: Fix sloppy recognition of "id=..." after ",,"

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>

qemu-option: Fix sloppy recognition of "id=..." after ",,"

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-4-armbru@redhat.com>

show more ...

tests-qemu-opts: Cover has_help_option(), qemu_opt_has_help_opt()

The two turn out to be inconsistent for "a,b,,help". Test case
marked /* BUG */.

Signed-off-by: Markus Armbruster <armbru@redhat.c

tests-qemu-opts: Cover has_help_option(), qemu_opt_has_help_opt()

The two turn out to be inconsistent for "a,b,,help". Test case
marked /* BUG */.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

hw: Use IEC binary prefix definitions from "qemu/units.h"

Code change produced with:

$ git ls-files | egrep '\.[ch]$' | \
xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g'

Suggested-by: Stefan

hw: Use IEC binary prefix definitions from "qemu/units.h"

Code change produced with:

$ git ls-files | egrep '\.[ch]$' | \
xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g'

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Message-Id: <20180625124238.25339-6-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

opts: don't silently truncate long parameter keys

The existing QemuOpts parsing code uses a fixed size 128 byte buffer
for storing the parameter keys. If a key exceeded this size it was
silently tru

opts: don't silently truncate long parameter keys

The existing QemuOpts parsing code uses a fixed size 128 byte buffer
for storing the parameter keys. If a key exceeded this size it was
silently truncate and no error reported to the user. This behaviour was
reasonable & harmless because traditionally the key names are all
statically declared, and it was known that no code was declaring a key
longer than 127 bytes. This assumption, however, ceased to be valid once
the block layer added support for dot-separate compound keys. This
syntax allows for keys that can be arbitrarily long, limited only by the
number of block drivers you can stack up. With this usage, silently
truncating the key name can never lead to correct behaviour.

Hopefully such truncation would turn into an error, when the block code
then tried to extract options later, but there's no guarantee that will
happen. It is conceivable that an option specified by the user may be
truncated and then ignored. This could have serious consequences,
possibly even leading to security problems if the ignored option set a
security relevant parameter.

If the operating system didn't limit the user's argv when spawning QEMU,
the code should honour whatever length arguments were given without
imposing its own length restrictions. This patch thus changes the code
to use a heap allocated buffer for storing the keys during parsing,
lifting the arbitrary length restriction.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180416111743.8473-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...

qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF

Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that wor

qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF

Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

test-qemu-opts: Test qemu_opts_to_qdict_filtered()

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

test-qemu-opts: Test qemu_opts_append()

Basic test for merging two QemuOptsLists.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mr

test-qemu-opts: Test qemu_opts_append()

Basic test for merging two QemuOptsLists.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

show more ...

Move include qemu/option.h from qemu-common.h to actual users

qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add

Move include qemu/option.h from qemu-common.h to actual users

qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]

show more ...

Include qapi/qmp/qdict.h exactly where needed

This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/q

Include qapi/qmp/qdict.h exactly where needed

This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>

show more ...

qobject: Use simpler QDict/QList scalar insertion macros

We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
spatc

qobject: Use simpler QDict/QList scalar insertion macros

We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

tests: Use error_free_or_abort() where appropriate

Done with this Coccinelle semantic patch:

@@
expression E;
@@
- g_assert(E);
- error_free(E);
+ error_free_or_abo

tests: Use error_free_or_abort() where appropriate

Done with this Coccinelle semantic patch:

@@
expression E;
@@
- g_assert(E);
- error_free(E);
+ error_free_or_abort(&E);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487362554-5688-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

test-qemu-opts: Cover qemu_opts_parse() of "no"

qemu_opts_parse() interprets "no" as negated empty key. Consistent
with its acceptance of empty keys elsewhere, whatever that's worth.

Signed-off-by

test-qemu-opts: Cover qemu_opts_parse() of "no"

qemu_opts_parse() interprets "no" as negated empty key. Consistent
with its acceptance of empty keys elsewhere, whatever that's worth.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-2-git-send-email-armbru@redhat.com>

show more ...

option: Fix checking of sizes for overflow and trailing crap

parse_option_size()'s checking for overflow and trailing crap is
wrong. Has always been that way. qemu_strtosz() gets it right, so
use

option: Fix checking of sizes for overflow and trailing crap

parse_option_size()'s checking for overflow and trailing crap is
wrong. Has always been that way. qemu_strtosz() gets it right, so
use that.

This adds support for size suffixes 'P', 'E', and ignores case for all
suffixes, not just 'k'.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-25-git-send-email-armbru@redhat.com>

show more ...

option: Fix to reject invalid and overflowing numbers

parse_option_number() fails to check for these errors after
strtoull(). Has always been broken. Fix that.

Signed-off-by: Markus Armbruster <a

option: Fix to reject invalid and overflowing numbers

parse_option_number() fails to check for these errors after
strtoull(). Has always been broken. Fix that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-10-git-send-email-armbru@redhat.com>

show more ...

test-qemu-opts: Cover qemu_opts_parse()

The new tests demonstrate a few bugs, all clearly marked.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Me

test-qemu-opts: Cover qemu_opts_parse()

The new tests demonstrate a few bugs, all clearly marked.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-2-git-send-email-armbru@redhat.com>
[A few additional test cases squashed in, see
Message-ID: <871supjijq.fsf@dusky.pond.sub.org>]

show more ...

tests: Remove unnecessary glib.h includes

Remove glib.h includes, as it is provided by osdep.h.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@lin

tests: Remove unnecessary glib.h includes

Remove glib.h includes, as it is provided by osdep.h.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...