qapi: Move include/qapi/qmp/ to include/qobject/

The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various histo

qapi: Move include/qapi/qmp/ to include/qobject/

The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.

This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.

This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]

show more ...

tests/: spelling fixes

with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.

Signed-off-by: Michael Tokarev <mjt@tls.msk.

tests/: spelling fixes

with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

io: Add support for MSG_PEEK for socket channel

MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for

io: Add support for MSG_PEEK for socket channel

MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for socket class. Extra parameter 'flags'
is added to io_readv calls to pass extra read flags like MSG_PEEK.

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

show more ...

tests/qtest/tpm-emu: Avoid hangs using abort handlers closing channels

Install abort handlers that close the TPM control and data channels in
case an abort occurs. The purpose of this is to have QEM

tests/qtest/tpm-emu: Avoid hangs using abort handlers closing channels

Install abort handlers that close the TPM control and data channels in
case an abort occurs. The purpose of this is to have QEMU terminate
under abnormal test case failures to resolve intermittent hangs on s390x
hosts running TPM tests for QEMU/x86_64.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230111134547.3959604-1-stefanb@linux.ibm.com

show more ...

tests: Use QMP to check whether a TPM device model is available

Use QMP to check whether a given TPM device model is available and if it
is not the case then do not register the tests that require i

tests: Use QMP to check whether a TPM device model is available

Use QMP to check whether a given TPM device model is available and if it
is not the case then do not register the tests that require it.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210802215246.1433175-9-stefanb@linux.ibm.com

show more ...

tests: tpm: Create TPM 1.2 response in TPM emulator

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-7-stefanb@li

tests: tpm: Create TPM 1.2 response in TPM emulator

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-7-stefanb@linux.ibm.com

show more ...

tests: Add tpm_version field to TPMTestState and fill it

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-3-st

tests: Add tpm_version field to TPMTestState and fill it

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-3-stefanb@linux.ibm.com

show more ...

tests: Rename TestState to TPMTestState

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-2-stefanb@linux.ibm.c

tests: Rename TestState to TPMTestState

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-2-stefanb@linux.ibm.com

show more ...

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.

Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

show more ...

tests: tpm-emu: Remove assert on TPM2_ST_NO_SESSIONS

bios-tables-test executes SeaBIOS. Indeed FW is needed to
fetch tables from QEMU and put them into the guest RAM. Also
the FW patches cross table

tests: tpm-emu: Remove assert on TPM2_ST_NO_SESSIONS

bios-tables-test executes SeaBIOS. Indeed FW is needed to
fetch tables from QEMU and put them into the guest RAM. Also
the FW patches cross table pointers. At some point, SeaBIOS
ends up calling the TPM2_CC_HierarchyControl command with
TPM2_ST_SESSIONS tag, most probably steming from
tpm_set_failure/tpm20_hierarchycontrol SeaBIOS call path.
This causes an assert() in the qtest tpm emulation code.

As the goal here is not to boot SeaBIOS completely but just
let it grab the ACPI tables and consolidate them, let's just
remove the assert().

Signed-off-by: Eric Auger <eric.auger@redhat.com>

Message-Id: <20200609125409.24179-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

socket: Add num connections to qio_channel_socket_sync()

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

tests: Fix signalling race condition in TPM tests

This patch fixes a race condition and test failure where the main process
waits for the signal of a thread but the thread already sent that signal
v

tests: Fix signalling race condition in TPM tests

This patch fixes a race condition and test failure where the main process
waits for the signal of a thread but the thread already sent that signal
via a condition. Since these signals are non-sticky, we need to introduce a
separate variable to make this signal sticky.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

show more ...

tests: fix tpm-crb tpm-tis tests race

No need to close the TPM data socket on the emulator end, qemu will
close it after a SHUTDOWN. This avoids a race between close() and
read() in the TPM data thr

tests: fix tpm-crb tpm-tis tests race

No need to close the TPM data socket on the emulator end, qemu will
close it after a SHUTDOWN. This avoids a race between close() and
read() in the TPM data thread.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

tests: add test for TPM TIS device

Move the TPM TIS related register and flag #defines into
include/hw/acpi/tpm.h for access by the test case.

Write a test case that covers the TIS functionality.

tests: add test for TPM TIS device

Move the TPM TIS related register and flag #defines into
include/hw/acpi/tpm.h for access by the test case.

Write a test case that covers the TIS functionality.

Add the tests cases to the MAINTAINERS file.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

show more ...

tests: Move common TPM test code into tpm-emu.c

Move threads and other common TPM test code into tpm-emu.c.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau

tests: Move common TPM test code into tpm-emu.c

Move threads and other common TPM test code into tpm-emu.c.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

show more ...