misc/pca955*: Move models under hw/gpio

The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under h

misc/pca955*: Move models under hw/gpio

The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.

Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

misc/pca9552: Fix inverted input status

The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a p

misc/pca9552: Fix inverted input status

The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.

Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

show more ...

tests: move libqtest.h back under qtest/

Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to it

tests: move libqtest.h back under qtest/

Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>

show more ...

meson: convert tests/qtest to meson

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libqos: rename i2c_send and i2c_recv

The names i2c_send and i2c_recv collide with functions defined in
hw/i2c/core.c. This causes an error when linking against libqos and
softmmu simultaneously (for

libqos: rename i2c_send and i2c_recv

The names i2c_send and i2c_recv collide with functions defined in
hw/i2c/core.c. This causes an error when linking against libqos and
softmmu simultaneously (for example when using qtest inproc). Rename the
libqos functions to avoid this.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200220041118.23264-10-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

libqos: i2c: move address into QI2CDevice

This removes the hardcoded I2C address from the tests. The address
is passed via QOSGraphEdgeOptions to i2c_device_create and stored
in the QI2CDevice.

Th

libqos: i2c: move address into QI2CDevice

This removes the hardcoded I2C address from the tests. The address
is passed via QOSGraphEdgeOptions to i2c_device_create and stored
in the QI2CDevice.

The i2c_send and i2c_recv functions, along with their wrappers,
therefore, can be changed to take a QI2CDevice rather than an
adapter/address pair.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

tests: convert OMAP i2c tests to qgraph

This way, pca9952-test and tmp105-test will run for every machine
that exposes an i2c-bus.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libqos: split I2CAdapter initialization and allocation

Provide *_init functions that populate an I2CAdapter struct without
allocating one, and make the existing *_create functions wrap them.

Becaus

libqos: split I2CAdapter initialization and allocation

Provide *_init functions that populate an I2CAdapter struct without
allocating one, and make the existing *_create functions wrap them.

Because in the new setup *_create might return a pointer inside the
IMXI2C or OMAPI2C struct, create companion *_free functions to go
back to the outer pointer.

All this is temporary until allocation will be handled entirely by
qgraph.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

pca9552-test: do not rely on state across tests

receive_autoinc is relying on the LED state that is set by
send_and_receive. Stop doing that, because qgraph resets the
machine between tests.

Revie

pca9552-test: do not rely on state across tests

receive_autoinc is relying on the LED state that is set by
send_and_receive. Stop doing that, because qgraph resets the
machine between tests.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

libqos: move common i2c code to libqos

The functions to read/write 8-bit or 16-bit registers are the same
in tmp105 and pca9552 tests, and in fact they are a special case of
"read block"/"write bloc

libqos: move common i2c code to libqos

The functions to read/write 8-bit or 16-bit registers are the same
in tmp105 and pca9552 tests, and in fact they are a special case of
"read block"/"write block" functionality; read block in turn is used
in ds1338-test.

Move everything inside libqos-test, removing the duplication. Account
for the small differences by adding to tmp105-test.c the "read register
after writing" behavior that is specific to it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

misc: add pca9552 LED blinker model

Specs are available here :

https://www.nxp.com/docs/en/application-note/AN264.pdf

This is a simple model supporting the basic registers for led and GPIO
mod

misc: add pca9552 LED blinker model

Specs are available here :

https://www.nxp.com/docs/en/application-note/AN264.pdf

This is a simple model supporting the basic registers for led and GPIO
mode. The device also supports two blinking rates but not the model
yet.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...