tests/qtest/bios-tables-test: Use MiB macro rather hardcode value

Replace 1024 * 1024 with MiB macro.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250520130158.767083-4-maobibo@loon

tests/qtest/bios-tables-test: Use MiB macro rather hardcode value

Replace 1024 * 1024 with MiB macro.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250520130158.767083-4-maobibo@loongson.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test: Free tables at dump_aml_files

The dump_aml_files() function calls load_expected_aml() to allocate
the tables but never frees it. Add the missing call to
free_test_data(

tests/qtest/bios-tables-test: Free tables at dump_aml_files

The dump_aml_files() function calls load_expected_aml() to allocate
the tables but never frees it. Add the missing call to
free_test_data().

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241209204427.17763-4-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>

show more ...

tests/qtest: Use qtest_system_reset() instead of open-coded versions

Use the qtest_system_reset() function in various tests that were
previously open-coding the system-reset. Note that in several
ca

tests/qtest: Use qtest_system_reset() instead of open-coded versions

Use the qtest_system_reset() function in various tests that were
previously open-coding the system-reset. Note that in several
cases this fixes a bug where the test did not wait for the RESET
QMP event before continuing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>

show more ...

bios-tables-test: Add complex SRAT / HMAT test for GI GP

Add a test with 6 nodes to exercise most interesting corner cases of SRAT
and HMAT generation including the new Generic Initiator and Generic

bios-tables-test: Add complex SRAT / HMAT test for GI GP

Add a test with 6 nodes to exercise most interesting corner cases of SRAT
and HMAT generation including the new Generic Initiator and Generic Port
Affinity structures. More details of the set up in the following patch
adding the table data.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test.c: Enable numamem testing for RISC-V

Add ACPI SRAT table test case for RISC-V when NUMA was enabled.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V

tests/qtest/bios-tables-test.c: Enable numamem testing for RISC-V

Add ACPI SRAT table test case for RISC-V when NUMA was enabled.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V

Add basic ACPI table test case for RISC-V.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistai

tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V

Add basic ACPI table test case for RISC-V.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test.c: Remove the fall back path

The expected ACPI AML files are moved now under ${arch}/{machine} path.
Hence, there is no need to search in old path which didn't have ${ar

tests/qtest/bios-tables-test.c: Remove the fall back path

The expected ACPI AML files are moved now under ${arch}/{machine} path.
Hence, there is no need to search in old path which didn't have ${arch}.
Remove the code which searches for the expected AML files under old path
as well.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test.c: Set "arch" for x86 tests

To search for expected AML files under ${arch}/${machine} path, set this
field for X86 related test cases.

Signed-off-by: Sunil V L <sunilvl

tests/qtest/bios-tables-test.c: Set "arch" for x86 tests

To search for expected AML files under ${arch}/${machine} path, set this
field for X86 related test cases.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test.c: Set "arch" for aarch64 tests

To search for expected AML files under ${arch}/${machine} path, set this
field for AARCH64 related test cases.

Signed-off-by: Sunil V L

tests/qtest/bios-tables-test.c: Set "arch" for aarch64 tests

To search for expected AML files under ${arch}/${machine} path, set this
field for AARCH64 related test cases.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/qtest/bios-tables-test.c: Add support for arch in path

Since machine name can be common for multiple architectures (ex: virt),
add "arch" in the path to search for expected AML files. Since th

tests/qtest/bios-tables-test.c: Add support for arch in path

Since machine name can be common for multiple architectures (ex: virt),
add "arch" in the path to search for expected AML files. Since the AML
files are still under old path, add support for searching with and
without arch in the path.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

qtest: bios-tables-test: Rename aarch64 tests with aarch64 in them

Existing AARCH64 virt test functions do not have AARCH64 in their name.
To add RISC-V virt related test cases, better to rename exi

qtest: bios-tables-test: Rename aarch64 tests with aarch64 in them

Existing AARCH64 virt test functions do not have AARCH64 in their name.
To add RISC-V virt related test cases, better to rename existing
functions to indicate they are ARM only.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: smbios: add test for legacy mode CLI options

Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying

tests: smbios: add test for legacy mode CLI options

Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying around.

Hence add test for CLI options handling to be sure that it
ain't broken during SMBIOS code refactoring.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: smbios: add test for -smbios type=11 option

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Messag

tests: smbios: add test for -smbios type=11 option

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: smbios: make it possible to write SMBIOS only test

Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.

Extract SMBIOS testi

tests: smbios: make it possible to write SMBIOS only test

Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.

Extract SMBIOS testing into separate routines that could also
be run without ACPI dependency and use that for testing SMBIOS.

As the 1st user add "acpi/piix4/smbios-options" test case.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: bios-tables-test: Rename smbios type 4 related test functions

In fact, type4-count, core-count, core-count2, thread-count and
thread-count2 are tested with KVM not TCG.

Rename these test fun

tests: bios-tables-test: Rename smbios type 4 related test functions

In fact, type4-count, core-count, core-count2, thread-count and
thread-count2 are tested with KVM not TCG.

Rename these test functions to reflect KVM base instead of TCG.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231127160202.1037290-1-zhao1.liu@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/acpi/bios-tables-test: do not write new blobs unless there are changes

When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of wheth

tests/acpi/bios-tables-test: do not write new blobs unless there are changes

When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.

This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.

When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.

This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.

CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>

show more ...

tests: bios-tables-test: Add test for smbios type4 thread count2

This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), i

tests: bios-tables-test: Add test for smbios type4 thread count2

This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
threads in the socket is more than 255, then smbios type4 table encodes
threads per socket into the thread count2 field.

So for the topology in this case, there're the following considerations:
1. threads per socket should be more than 255 to ensure we could cover
the thread count2 field.
2. The original bug was that threads per socket was miscalculated, so
now we should configure as many topology levels as possible (multiple
dies, no module since x86 hasn't supported it) to cover more general
topology scenarios, to ensure that the threads per socket encoded in
the thread count2 field is correct.
3. For the more general topology, we should also add "cpus" (presented
threads for machine) and "maxcpus" (total threads for machine) to
make sure that configuring unpluged CPUs in smp (cpus < maxcpus)
does not affect the correctness of threads per socket for thread
count2 field.

Note we don't consider the topology with multiple sockets since this
topology would create too many vCPUs (more than 255 threads per socket
with at least 2 sockets, which may cause the failure "Number of
hotpluggable cpus requested (*) exceeds the maximum cpus supported by
KVM (*) socket_accept failed: Resource temporarily unavailable"), and
the calculation of threads per socket has already been covered by
"thread count" test case.

Based on these considerations, select the topology as the follow:

-smp cpus=210,maxcpus=260,dies=2,cores=65,threads=2

The expected thread count2 = threads per socket = threads (2)
* cores (65) * dies (2) = 260.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231023094635.1588282-16-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: bios-tables-test: Add test for smbios type4 thread count

This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), if

tests: bios-tables-test: Add test for smbios type4 thread count

This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
threads in the socket is not more than 255, then smbios type4 table
encodes threads per socket into the thread count field.

So for the topology in this case, there're the following considerations:
1. threads per socket should be not more than 255 to ensure we could
cover the thread count field.
2. The original bug was that threads per socket was miscalculated, so
now we should configure as many topology levels as possible (multiple
sockets & dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the threads per
socket encoded in the thread count field is correct.
3. For the more general topology, we should also add "cpus" (presented
threads for machine) and "maxcpus" (total threads for machine) to
make sure that configuring unpluged CPUs in smp (cpus < maxcpus)
does not affect the correctness of threads per socket for thread
count field.

Based on these considerations, select the topology as the follow:

-smp cpus=15,maxcpus=54,sockets=2,dies=3,cores=3,threads=3

The expected thread count = threads per socket = threads (3) * cores (3)
* dies (3) = 27.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-13-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: bios-tables-test: Extend smbios core count2 test to cover general topology

The commit 196ea60a734c3 ("hw/smbios: Fix core count in type4") fixed
the miscalculation of cores per socket.

The o

tests: bios-tables-test: Extend smbios core count2 test to cover general topology

The commit 196ea60a734c3 ("hw/smbios: Fix core count in type4") fixed
the miscalculation of cores per socket.

The original core count2 test (with the topology configured by
"-smp 275") didn't recognize that topology-related but because it just
created a special topology with only one socket and one die by default,
ignoring the effect of more topology levels (between socket and core) on
the cores per socket calculation.

So for the topology in this case, there're the following considerations:
1. cores per socket should be more than 255 to ensure we could cover
the core count2 field.
2. The original bug was that cores per socket was miscalculated, so now
we should include as many topology levels as possible (multiple
sockets or dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the cores per socket
encoded in the core count2 field is correct.

Based on these considerations, select the topology with multiple dies:

-smp 260,dies=2,cores=130,threads=1

Note, here we doesn't configure multiple sockets to avoid the error
("kvm_init_vcpu: kvm_get_vcpu failed (*): Too many open files") if user
uses the default ulimit seeting on his machine.

And the cores per socket calculation for multiple sockets has already
been covered by the core count test case, so that only multiple dies
configuration is enough.

The expected core count2 = cores per socket = cores (130) * dies (2) =
260.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-10-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: bios-tables-test: Add test for smbios type4 core count

This tests the commit 196ea60a734c3 ("hw/smbios: Fix core count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), if the

tests: bios-tables-test: Add test for smbios type4 core count

This tests the commit 196ea60a734c3 ("hw/smbios: Fix core count in
type4").

In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
cores in the socket is not more than 255, then smbios type4 table
encodes cores per socket into the core count field.

So for the topology in this case, there're the following considerations:
1. cores per socket should be not more than 255 to ensure we could cover
the core count field.
2. The original bug was that cores per socket was miscalculated, so now
we should include as many topology levels as possible (mutiple
sockets & dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the cores per socket
encoded in the core count field is correct.

Based on these considerations, select the topology with multiple sockets
and dies:

-smp 54,sockets=2,dies=3,cores=3,threads=3

The expected core count = cores per socket = cores (3) * dies (3) = 9.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-7-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: bios-tables-test: Add test for smbios type4 count

This tests the commit d79a284a44bb7 ("hw/smbios: Fix smbios_smp_sockets
calculation").

In smbios_get_tables() (hw/smbios/smbios.c), smbios t

tests: bios-tables-test: Add test for smbios type4 count

This tests the commit d79a284a44bb7 ("hw/smbios: Fix smbios_smp_sockets
calculation").

In smbios_get_tables() (hw/smbios/smbios.c), smbios type4 table is built
for each socket, so the count of type4 tables should be equal to the
number of sockets.

Thus for the topology in this case, there're the following considerations:
1. The topology should include multiple sockets to ensure smbios could
create type4 tables for each socket.
2. In addition to sockets, for the more general topology, we should also
configure as many topology levels as possible (multiple dies, no
module since x86 hasn't supported it), to ensure that smbios is able
to exclude the effect of other topology levels to create the type4
tables only for sockets.
3. The original miscalculation bug also misused "smp.cpus", so it's
necessary to configure "cpus" (presented threads for machine) and
"maxcpus" (total threads for machine) as well to make sure that
configuring unpluged CPUs in smp (cpus < maxcpus) does not affect
the correctness of the count of type4 tables.

Based on these considerations, select the topology as the follow:

-smp cpus=100,maxcpus=120,sockets=5,dies=2,cores=4,threads=3

The expected count of type4 tables = sockets (5).

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-4-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/bios-tables-test: tcg-emulate opteron for mmio64 test

seabios starts to make the placement of the 64bit mmio window
depend on the physical address space. Run the testcase with
a fixed process

tests/bios-tables-test: tcg-emulate opteron for mmio64 test

seabios starts to make the placement of the 64bit mmio window
depend on the physical address space. Run the testcase with
a fixed processor on tcg to avoid different results depending
on the host machine.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

hw/i386/pc: improve physical address space bound check for 32-bit x86 systems

32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features,

hw/i386/pc: improve physical address space bound check for 32-bit x86 systems

32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.

Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.

This change adds improvements to take above into consideration.

For example, previously this was allowed:

$ ./qemu-system-x86_64 -cpu pentium -m size=10G

With this change now it is no longer allowed:

$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)

However, the following are allowed since on both cases physical address
space of the processor is 36 bits:

$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G

For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.

$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)

A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:

$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2

Further, following is also allowed as with PSE36, the processor has 36-bit
address space:

$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2

After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.

Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.

Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/: spelling fixes

with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.

Signed-off-by: Michael Tokarev <mjt@tls.msk.

tests/: spelling fixes

with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

tests/qtest/bios-tables-test: Check for virtio-iommu device before using it

The virtio-iommu device might be missing in the QEMU binary (e.g. in
downstream RHEL builds), so let's better check for it

tests/qtest/bios-tables-test: Check for virtio-iommu device before using it

The virtio-iommu device might be missing in the QEMU binary (e.g. in
downstream RHEL builds), so let's better check for its availability first
before using it.

Message-Id: <20230822164948.65187-1-thuth@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...