Merge tag 'pull-riscv-to-apply-20250305-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 10.0

* CSR coverity fixes
* Fix unexpected behavior of vector reduction instruction

Merge tag 'pull-riscv-to-apply-20250305-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 10.0

* CSR coverity fixes
* Fix unexpected behavior of vector reduction instructions when vl is 0
* Fix incorrect vlen comparison in prop_vlen_set
* Throw debug exception before page fault
* Remove redundant "hart_idx" masking from APLIC
* Add support for Control Transfer Records Ext
* Remove redundant struct members from the IOMMU
* Remove duplicate definitions from the IOMMU
* Fix tick_offset migration for Goldfish RTC
* Add serial alias in virt machine DTB
* Remove Bin Meng from RISC-V maintainers
* Add support for Control Transfer Records Ext
* Log guest errors when reserved bits are set in PTEs
* Add missing Sdtrig disas CSRs
* Correct the hpmevent sscofpmf mask
* Mask upper sscofpmf bits during validation
* Remove warnings about Smdbltrp/Smrnmi being disabled
* Respect mseccfg.RLB bit for TOR mode PMP entry
* Update KVM support to Linux 6.14-rc3
* IOMMU HPM support
* Support Sscofpmf/Svade/Svadu/Smnpm/Ssnpm extensions in KVM
* Add --ignore-family option to binfmt
* Refinement for AIA with KVM acceleration
* Reset time changes for KVM

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmfHrkEACgkQr3yVEwxT
# gBNGTA/+N9nBPZt5cv0E/0EDZMQS8RQrQvz1yHRgAXOq8RnOdcL72v8wovGAfnVu
# l0BXDoVBvw4f2Xm9Q4ptlfH8HAefCeQ4E/K9j5Lwxr8OqZHFg6e+JQIyZOt6wBWI
# hJbz1/laJIbXq3cGgwcE/l0aGfb2UAAsA4dsZVt/MnjAV8GS7BF9RCkgCPxD4FZA
# 0PLiq9dF+4o4q7PxnxAbUVz/uhLzqmcnQemQFHbf9Wms3tZEDKmPSoKP/v+01Rkw
# tm+cgy7OocpgygbMc0nykYG50P+raUBSesk/jFGeKj8cU4IeMuzDsVPWcd4rG+0X
# Z+nENfOY7vOqMCXgaQCW2r4vEQx2Gj0yQG6xmVAemRWzFHJdz5W01/uUSHzJSB+L
# +VbAH55HYKr6sbgecqInQ/rsHKyw6D5QFcj/guz+kvhsH9rJ5q60uywrWL5OEuaK
# vKv7cSZghlf9bwy6soassXxk8z+j4psJ7WnnVpynNKMew9yFFDhayuIFbo9952gH
# 3+NCm2cQrkTYJOXAJwkxBD+I4AXxNSuxNjaVANk9q80uqbT9JiHM7pcvbJI00Fji
# OutJSPYtVXEin9Ev3sJ05YQHsIcZ/Noi3O5IdaRI0AMk/8gyGyhFCVgSpV52dH59
# HguPK05e5cW/xgElGUPHrU+UtzE05p18HnSoVPclF/B5rc8QXN0=
# =dobk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 09:52:01 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20250305-1' of https://github.com/alistair23/qemu: (59 commits)
target/riscv/kvm: add missing KVM CSRs
target/riscv/kvm: add kvm_riscv_reset_regs_csr()
target/riscv/cpu: remove unneeded !kvm_enabled() check
hw/intc/aplic: refine kvm_msicfgaddr
hw/intc/aplic: refine the APLIC realize
hw/intc/imsic: refine the IMSIC realize
binfmt: Add --ignore-family option
binfmt: Normalize host CPU architecture
binfmt: Shuffle things around
target/riscv/kvm: Add some exts support
docs/specs/riscv-iommu.rst: add HPM support info
hw/riscv: add IOMMU HPM trace events
hw/riscv/riscv-iommu.c: add RISCV_IOMMU_CAP_HPM cap
hw/riscv/riscv-iommu: add hpm events mmio write
hw/riscv/riscv-iommu: add IOHPMCYCLES mmio write
hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes
hw/riscv/riscv-iommu: instantiate hpm_timer
hw/riscv/riscv-iommu: add riscv_iommu_hpm_incr_ctr()
hw/riscv/riscv-iommu: add riscv-iommu-hpm file
hw/riscv/riscv-iommu-bits.h: HPM bits
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: Add CTR sctrclr instruction.

CTR extension adds a new instruction sctrclr to quickly
clear the recorded entries buffer.

Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Acked-by:

target/riscv: Add CTR sctrclr instruction.

CTR extension adds a new instruction sctrclr to quickly
clear the recorded entries buffer.

Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250205-b4-ctr_upstream_v6-v6-5-439d8e06c8ef@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add support to record CTR entries.

This commit adds logic to records CTR entries of different types
and adds required hooks in TCG and interrupt/Exception logic to
record events.

This

target/riscv: Add support to record CTR entries.

This commit adds logic to records CTR entries of different types
and adds required hooks in TCG and interrupt/Exception logic to
record events.

This commit also adds support to invoke freeze CTR logic for breakpoint
exceptions and counter overflow interrupts.

Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250205-b4-ctr_upstream_v6-v6-4-439d8e06c8ef@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for 10.0

* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
*

Merge tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for 10.0

* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmeMUUwACgkQr3yVEwxT
# gBNgDQ/+JeqcsbJRX+PZQJEV06tDIJpk+mfaBHUYSGdNkjI9fzowNaxFIEB2vaLt
# 4+xAGMnJ4vMcjJyBcPOn1FKAlowM7MsUNITOF9Rstnyriqnj2UsUZ9YBtkuG6gWH
# ZHoYEKu7mAZoZw5RRx4TatHDXw7TYfUsrDPrn+x6yeCZTq9ruRTlHkzp2LC725Vq
# KTnbWAP7WlqiJaSxB5eIFYT5tYP1Blp0yD358B037C57EU9j5zm2FQdFmVK1+xRF
# dFg/urBIzfAjjkCS/t9DmH+S6NgMEut6udUhllk/KUJAzWvsggc4wZZlWjFOJFJY
# fIxx3alhY3pcm1PYjFpf15Poz6Pqva/KGjwgZafirKQtPbRSzfRkUwcHOYRTQT9j
# abeiB44XPaeIl8Jvw7GLxcWtlJ5NmBrZho+2Z9mIhB/Ix5H3PDgs18Oc/s73P2qQ
# JFLRb7cpYy1HbRc0ugvwAmOTY1t6HX8HAtT+3rNhiXpXnj4RW2C/WU1cEqrg8QkM
# cTPiy2zHoBhAWt9aDK1Kvbhb1vur3JaF7rk9jeKlriFr87Ly+yPU+8mnEDw40NMR
# Tc9nivqmOqqXS5AM9O/W1uzTWzpxIUy7XBy3cuSk0uZCoge4IE2Or7P2Rb2uyaNZ
# RkAo/PL2N1cMjP7gB3kLRtYY7FA+nal66KhfbHPRHqj+ZwUAxzs=
# =F3IG
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 18 Jan 2025 20:11:40 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu: (50 commits)
hw/char/riscv_htif: Convert HTIF_DEBUG() to trace events
target/riscv: Support Supm and Sspm as part of Zjpm v1.0
hw/riscv/riscv-iommu.c: Introduce a translation tag for the page table cache
target/riscv: Add Smdbltrp ISA extension enable switch
target/riscv: Implement Smdbltrp behavior
target/riscv: Implement Smdbltrp sret, mret and mnret behavior
target/riscv: Add Smdbltrp CSRs handling
target/riscv: Add Ssdbltrp ISA extension enable switch
target/riscv: Implement Ssdbltrp exception handling
target/riscv: Implement Ssdbltrp sret, mret and mnret behavior
target/riscv: Add Ssdbltrp CSRs handling
target/riscv: Fix henvcfg potentially containing stale bits
target/riscv: Add configuration for S[m|s]csrind, Smcdeleg/Ssccfg
target/riscv: Add implied rule for counter delegation extensions
target/riscv: Invoke pmu init after feature enable
target/riscv: Add counter delegation/configuration support
target/riscv: Add select value range check for counter delegation
target/riscv: Add counter delegation definitions
target/riscv: Add properties for counter delegation ISA extensions
target/riscv: Support generic CSR indirect access
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: Add Smrnmi mnret instruction

This patch adds a new instruction 'mnret'. 'mnret' is an M-mode-only
instruction that uses the values in `mnepc` and `mnstatus` to return to the
program co

target/riscv: Add Smrnmi mnret instruction

This patch adds a new instruction 'mnret'. 'mnret' is an M-mode-only
instruction that uses the values in `mnepc` and `mnstatus` to return to the
program counter, privilege mode, and virtualization mode of the
interrupted context.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs

Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZdVzcACgkQr3yVEwxT
# gBPxSBAAsuzhDCbaOl9jXhIL6Q0IDHULz4U16AZypHYID7T6rDaNoRmNVdqBKZuM
# IMby8qm5XFmcUGM9itcM7IKV2BNHuWSye3/Y7GOYZQyToR7U6lvLpAm4pNj4AgTC
# PLV2VPt1XLZRSthkgwp6ylBXzdNSiZMWggqTb7QbyfR5hJfG+VsZjTGaIwyZbtKI
# +CJG6gZSPv6JGNtwnJq+v0VBEkj1ryo/gg2EAAzA+EWU4nw5mJCLWoDLrYZalTv9
# vCTqJuMViTjeHqAm/IIMoFzYR94+ug0usqcmnx/E7ALTOsmBh5K+KWndAW4vqAlP
# mZOONfr3h7zc81jThC961kjGVPiTjTGbHHlKwlB2JEggwctcVqGRyWeM9wHSUr2W
# S6F56hpForzVW9IkCt/fDUxamr23303s5miIsronrwiihqkNpxKYAuqPTXFGkFKg
# ilBLGcbHcWxNmjpfIEXnTjDB6qFEceWqbjJejrsKusoSPkKQm0ktIZZUwCbTsu45
# 0ScYrBieUPjDWDFYlmWrr5byekyCXCzfpBgq8qo60FA+aP29Nx+GlFR0eWTXXY4V
# O5/WTKjQM4+/uNYIuFDCFPV1Ja5GERDhXoNkjkY5ErsSZL2c2UEp3UTxzbEl5dOm
# NRH7C26Z/xVMDwT08kDDq0t8Rkz4836txPO7y+aPbtvGfENRI8E=
# =mtVb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jun 2024 12:40:07 AM CDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu: (27 commits)
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: Remove experimental prefix from "B" extension
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
riscv: thead: Add th.sxstatus CSR emulation
target/riscv: Implement dynamic establishment of custom decoder
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv: Relax vector register check in RISCV gdbstub
target/riscv: Add support for Zve64x extension
target/riscv: Add support for Zve32x extension
trans_privileged.c.inc: set (m|s)tval on ebreak breakpoint
target/riscv/debug: set tval=pc in breakpoint exceptions
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/riscv: Raise exceptions on wrs.nto

Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but

target/riscv: Raise exceptions on wrs.nto

Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but it's not useful for virtualization, where
we'd like the guest to trap to the hypervisor in order to allow
scheduling of the lock holding VCPU. Change to always immediately
raise exceptions when the appropriate conditions are present,
otherwise continue to just return. Note, immediately raising
exceptions is also consistent with the specification since the
time limit that should expire prior to the exception is
implementation-specific.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.2

* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
*

Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.2

* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: Add Zvksed ISA extension support

This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:

* vsm4k.vi
* vsm4r.[vv,vs]

Translation

target/riscv: Add Zvksed ISA extension support

This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:

* vsm4k.vi
* vsm4r.[vv,vs]

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvkg ISA extension support

This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:

* vgmul.vv
* vghsh.vv

Translation function

target/riscv: Add Zvkg ISA extension support

This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:

* vgmul.vv
* vghsh.vv

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvksh ISA extension support

This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:

* vsm3me.vv
* vsm3c.vi

Translation funct

target/riscv: Add Zvksh ISA extension support

This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:

* vsm3me.vv
* vsm3c.vi

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvknh ISA extension support

This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:

* vsha2ms.vv
* vsha2c[hl].vv

Translation

target/riscv: Add Zvknh ISA extension support

This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:

* vsha2ms.vv
* vsha2c[hl].vv

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvkned ISA extension support

This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:

* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vae

target/riscv: Add Zvkned ISA extension support

This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:

* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvbb ISA extension support

This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:

* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v

target/riscv: Add Zvbb ISA extension support

This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:

* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add Zvbc ISA extension support

This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:

* vclmulh.[vx,vv]
* vclmul.[vx,vv]

Transla

target/riscv: Add Zvbc ISA extension support

This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:

* vclmulh.[vx,vv]
* vclmul.[vx,vv]

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg

Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

riscv: Add support for the Zfa extension

This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
*

riscv: Add support for the Zfa extension

This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)

Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)

Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.

The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg

The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add support for Zvfbfwma extension

Add trans_* and helper function for Zvfbfwma instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqian

target/riscv: Add support for Zvfbfwma extension

Add trans_* and helper function for Zvfbfwma instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add support for Zvfbfmin extension

Add trans_* and helper function for Zvfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqian

target/riscv: Add support for Zvfbfmin extension

Add trans_* and helper function for Zvfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add support for Zfbfmin extension

Add trans_* and helper function for Zfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@

target/riscv: Add support for Zfbfmin extension

Add trans_* and helper function for Zfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.1

* CPURISCVState related cleanup and simplification
* Refactor Zicond and reuse

Merge tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.1

* CPURISCVState related cleanup and simplification
* Refactor Zicond and reuse in XVentanaCondOps
* Fix invalid riscv,event-to-mhpmcounters entry
* Support subsets of code size reduction extension
* Fix itrigger when icount is used
* Simplification for RVH related check and code style fix
* Add signature dump function for spike to run ACT tests
* Rework MISA writing
* Fix mstatus.MPP related support
* Use check for relationship between Zdinx/Zhinx{min} and Zfinx
* Fix the H extension TVM trap
* A large collection of mstatus sum changes and cleanups
* Zero init APLIC internal state
* Implement query-cpu-definitions
* Restore the predicate() NULL check behavior
* Fix Guest Physical Address Translation
* Make sure an exception is raised if a pte is malformed
* Add Ventana's Veyron V1 CPU

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmRUU48ACgkQr3yVEwxT
# gBP6gxAAyhmz7dKOPIb8RtUR4IT+SQhKYZEoSewy4xlXazZvh03K0jiYlEKcPLG+
# al50WlwL8ISsYwwpnatQr0deoeXnz9+qrSv7ikrzyqZScS8JTcJb/pdQnOz6WK3s
# 3FCBnBsYyjpdV6a2uCC9qck7xKTUpa9Gjx06DOuIoLfS8aFvf7Z3EbvsEyyDTEIi
# kwB0j5kdQkJLyx993F3atupjZSxvFmLJdtU4+IVYiOeBEVRD1iZth9KB9L9zjA49
# s+qTHg+afEr3GDlR02So9hYxyHqTHgRI8gkPaVN+ReEErC0nJNcx7/7tEhsLsswY
# fUAmsMnXaYOnEWFTJ+D/161rKx6QXwkX7bYCmPJFLGmzw5LWdK7JHEoXylRffuay
# Zh2e2tNky7QXPqp9fU0DBb9Xpbr0wHorLqFT8X8cuaI6r92weunZHx9zulhm11WA
# m0Q1UZaqAsnIL98UZocZr6C1hzR/OJ2QfjHDsKuPJEi8ylb7yRi4adcPn8YGBYX+
# 4YDNSvanegQq0g7gO3kSV/Cqweqm2xoDQyiRdyHWLQK2yJiZJTy07unzi+H7Dubf
# JR9bkdHTKz6Ywrf8hqw4yRqk5sPyamxHdXbhTDohUaPPQcfwQUraRdxIv1AQ94A1
# j+msUYpIZHjb5q2DtNHI1hQMdkVGRLMlfA8kpB+EcY1sXiqSky8=
# =fVG8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 May 2023 01:53:35 AM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu: (89 commits)
target/riscv: add Ventana's Veyron V1 CPU
riscv: Make sure an exception is raised if a pte is malformed
target/riscv: Fix Guest Physical Address Translation
target/riscv: Restore the predicate() NULL check behavior
target/riscv: add TYPE_RISCV_DYNAMIC_CPU
target/riscv: add query-cpy-definitions support
target/riscv: add CPU QOM header
hw/intc/riscv_aplic: Zero init APLIC internal state
target/riscv: Reorg sum check in get_physical_address
target/riscv: Reorg access check in get_physical_address
target/riscv: Merge checks for reserved pte flags
target/riscv: Don't modify SUM with is_debug
target/riscv: Suppress pte update with is_debug
target/riscv: Move leaf pte processing out of level loop
target/riscv: Hoist pbmte and hade out of the level loop
target/riscv: Hoist second stage mode change to callers
target/riscv: Check SUM in the correct register
target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_index
target/riscv: Move hstatus.spvp check to check_access_hlsv
target/riscv: Introduce mmuidx_2stage
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/riscv: Handle HLV, HSV via helpers

Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved ou

target/riscv: Handle HLV, HSV via helpers

Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved out of line, which
allows HLSX to be removed from TB_FLAGS.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: add support for Zcmt extension

Add encode, trans* functions and helper functions support for Zcmt
instrutions.
Add support for jvt csr.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>

target/riscv: add support for Zcmt extension

Add encode, trans* functions and helper functions support for Zcmt
instrutions.
Add support for jvt csr.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/riscv: implement Zicbom extension

Zicbom is the Cache-Block Management extension defined in the already
ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1].

The extension

target/riscv: implement Zicbom extension

Zicbom is the Cache-Block Management extension defined in the already
ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1].

The extension contains three instructions: cbo.clean, cbo.flush and
cbo.inval. All of them must be implemented in the same group as LQ and
cbo.zero due to overlapping patterns.

All these instructions can throw a Illegal Instruction/Virtual
Instruction exception, similar to the existing cbo.zero. The same
check_zicbo_envcfg() is used to handle these exceptions.

Aside from that, these instructions also need to handle page faults and
guest page faults. This is done in a new check_zicbom_access() helper.

As with Zicboz, the cache block size for Zicbom is also configurable.
Note that the spec determines that Zicbo[mp] and Zicboz can have
different cache sizes (Section 2.7 of [1]), so we also include a
'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They
are set to the same size, so unless users want to play around with the
settings both sizes will be the same.

[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...