target/mips: Introduce disas_mt_available()

Similarly to commit 17c2c320f3c ("Introduce ase_mt_available helper"),
introduce the disas_mt_available() one which takes a DisasContext
argument to deter

target/mips: Introduce disas_mt_available()

Similarly to commit 17c2c320f3c ("Introduce ase_mt_available helper"),
introduce the disas_mt_available() one which takes a DisasContext
argument to determine whether Multi-Threading is available by
checking the MT bit of the CP0_Config3 register.

Remove the then unused ASE_MT definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241024195447.44600-1-philmd@linaro.org>

show more ...

target/mips: Convert Loongson DDIV.G opcodes to decodetree

Introduce decode_loongson() to decode all Loongson vendor
specific opcodes. Start converting a single opcode: DDIV.G
(divide 64-bit signed

target/mips: Convert Loongson DDIV.G opcodes to decodetree

Introduce decode_loongson() to decode all Loongson vendor
specific opcodes. Start converting a single opcode: DDIV.G
(divide 64-bit signed integers).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

target/mips: Extract decode_64bit_enabled() helper

Extract the decode_64bit_enabled() helper which detects
whether CPUs can run 64-bit instructions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@li

target/mips: Extract decode_64bit_enabled() helper

Extract the decode_64bit_enabled() helper which detects
whether CPUs can run 64-bit instructions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241026175349.84523-2-philmd@linaro.org>

show more ...

target/mips: Use gen_op_addr_addi() when possible

Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.

gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize

target/mips: Use gen_op_addr_addi() when possible

Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.

gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize if the immediate is zero.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-13-philmd@linaro.org>

show more ...

target/mips: Introduce mo_endian() helper

Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Revi

target/mips: Introduce mo_endian() helper

Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-10-philmd@linaro.org>

show more ...

target/mips: Factor mo_endian_rev() out of MXU code

Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.

Suggested-by: Richard Henderson <richa

target/mips: Factor mo_endian_rev() out of MXU code

Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-7-philmd@linaro.org>

show more ...

target/mips: Rename cpu_is_bigendian() -> disas_is_bigendian()

Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as d

target/mips: Rename cpu_is_bigendian() -> disas_is_bigendian()

Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as disas_is_bigendian().

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-3-philmd@linaro.org>

show more ...

target/mips: Remove the unused DisasContext::saar field

DisasContext::saar is not used, remove it.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@lin

target/mips: Remove the unused DisasContext::saar field

DisasContext::saar is not used, remove it.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-11-philmd@linaro.org>

show more ...

include/exec: Use vaddr in DisasContextBase for virtual addresses

Updates target/ QEMU_LOG macros to use VADDR_PRIx for printing updated
DisasContextBase fields.

Signed-off-by: Anton Johansson <anj

include/exec: Use vaddr in DisasContextBase for virtual addresses

Updates target/ QEMU_LOG macros to use VADDR_PRIx for printing updated
DisasContextBase fields.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-10-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Rename cpu_env to tcg_env

Allow the name 'cpu_env' to be used for something else.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@li

tcg: Rename cpu_env to tcg_env

Allow the name 'cpu_env' to be used for something else.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/mips: Implement Loongson CSR instructions

Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.

Unfortunately we don't

target/mips: Implement Loongson CSR instructions

Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.

Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.

Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

target/mips: Tidy helpers for translation

Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/l

target/mips: Tidy helpers for translation

Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Move TCGv, dup_const_tl definitions to tcg-op.h

These two items are the last uses of TARGET_LONG_BITS within tcg.h,
and are more in common with the other "_tl" definitions within that file.

Re

tcg: Move TCGv, dup_const_tl definitions to tcg-op.h

These two items are the last uses of TARGET_LONG_BITS within tcg.h,
and are more in common with the other "_tl" definitions within that file.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/mips: Advance pc after semihosting exception

Delay generating the exception until after we know the
insn length, and record that length in env->error_code.

Fixes: 8ec7e3c53d4 ("target/mips:

target/mips: Advance pc after semihosting exception

Delay generating the exception until after we know the
insn length, and record that length in env->error_code.

Fixes: 8ec7e3c53d4 ("target/mips: Use an exception for semihosting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/mips: introduce decodetree structure for Cavium Octeon extension

This patch adds decodetree for Cavium Octeon extension and
an instruction set extension flag for using it in CPU models.

Sign

target/mips: introduce decodetree structure for Cavium Octeon extension

This patch adds decodetree for Cavium Octeon extension and
an instruction set extension flag for using it in CPU models.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672162.167724.13656301229517693806.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

exec/exec-all: Move 'qemu/log.h' include in units requiring it

Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core

exec/exec-all: Move 'qemu/log.h' include in units requiring it

Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

target/mips: Extract break code into env->error_code

Simplify cpu_loop by doing all of the decode in translate.

This fixes a bug in that cpu_loop was not handling the
different layout of the R6 ver

target/mips: Extract break code into env->error_code

Simplify cpu_loop by doing all of the decode in translate.

This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

target/mips: Replace TARGET_WORDS_BIGENDIAN by cpu_is_bigendian()

Add the inlined cpu_is_bigendian() function in "translate.h".

Replace the TARGET_WORDS_BIGENDIAN #ifdef'ry by calls to
cpu_is_bigen

target/mips: Replace TARGET_WORDS_BIGENDIAN by cpu_is_bigendian()

Add the inlined cpu_is_bigendian() function in "translate.h".

Replace the TARGET_WORDS_BIGENDIAN #ifdef'ry by calls to
cpu_is_bigendian().

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818164321.2474534-6-f4bug@amsat.org>

show more ...

target/mips: Store CP0_Config0 in DisasContext

Most TCG helpers only have access to a DisasContext pointer,
not CPUMIPSState. Store a copy of CPUMIPSState::CP0_Config0
in DisasContext so we can acce

target/mips: Store CP0_Config0 in DisasContext

Most TCG helpers only have access to a DisasContext pointer,
not CPUMIPSState. Store a copy of CPUMIPSState::CP0_Config0
in DisasContext so we can access it from TCG helpers.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818164321.2474534-5-f4bug@amsat.org>

show more ...

target/mips: Define gen_helper() macros in translate.h

To be able to split some code calling the gen_helper() macros
out of the huge translate.c, we need to define them in the
'translate.h' local he

target/mips: Define gen_helper() macros in translate.h

To be able to split some code calling the gen_helper() macros
out of the huge translate.c, we need to define them in the
'translate.h' local header.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-9-f4bug@amsat.org>

show more ...

target/mips: Introduce decodetree structure for NEC Vr54xx extension

The decoder is called but doesn't decode anything. This will
ease reviewing the next commit.

Signed-off-by: Philippe Mathieu-Dau

target/mips: Introduce decodetree structure for NEC Vr54xx extension

The decoder is called but doesn't decode anything. This will
ease reviewing the next commit.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801235926.3178085-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/mips: Introduce generic TRANS() macro for decodetree helpers

Plain copy/paste of the TRANS() macro introduced in the PPC
commit f2aabda8ac9 ("target/ppc: Move D/DS/X-form integer
loads to dec

target/mips: Introduce generic TRANS() macro for decodetree helpers

Plain copy/paste of the TRANS() macro introduced in the PPC
commit f2aabda8ac9 ("target/ppc: Move D/DS/X-form integer
loads to decodetree") to the MIPS target.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210808173018.90960-2-f4bug@amsat.org>

show more ...

target/mips: Add declarations for generic TCG helpers

We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.

We will first extract this code as included source files

target/mips: Add declarations for generic TCG helpers

We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.

We will first extract this code as included source files (.c.inc),
then make them new compilation units afterward.

The following methods are going to be used externally:

micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd);
micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ...
micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ...
mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ...

To avoid too much code churn, it is simpler to declare these
prototypes in "translate.h" now.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>

show more ...

target/mips: Move translate.h to tcg/ sub directory

We moved various TCG source files in commit a2b0a27d33e
("target/mips: Move TCG source files under tcg/ sub directory")
but forgot to move the hea

target/mips: Move translate.h to tcg/ sub directory

We moved various TCG source files in commit a2b0a27d33e
("target/mips: Move TCG source files under tcg/ sub directory")
but forgot to move the header declaring their prototypes.
Do it now, since all it declares is TCG specific.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-5-f4bug@amsat.org>

show more ...

target/mips: Make check_cp0_enabled() return a boolean

To avoid callers to emit dead code if check_cp0_enabled()
raise an exception, let it return a boolean value, whether
CP0 is enabled or not.

Su

target/mips: Make check_cp0_enabled() return a boolean

To avoid callers to emit dead code if check_cp0_enabled()
raise an exception, let it return a boolean value, whether
CP0 is enabled or not.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420193453.1913810-4-f4bug@amsat.org>

show more ...