include: Remove 'exec/exec-all.h'

"exec/exec-all.h" is now fully empty, let's remove it.

Mechanical change running:

$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)

Signed-off-by:

include: Remove 'exec/exec-all.h'

"exec/exec-all.h" is now fully empty, let's remove it.

Mechanical change running:

$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>

show more ...

target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philip

target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-19-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

target/mips: Implement Loongson CSR instructions

Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.

Unfortunately we don't

target/mips: Implement Loongson CSR instructions

Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.

Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.

Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

target/mips: Extract NEC Vr54xx helpers to vr54xx_helper.c

Extract NEC Vr54xx helpers from op_helper.c to a new file:
'vr54xx_helper.c'.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Revi

target/mips: Extract NEC Vr54xx helpers to vr54xx_helper.c

Extract NEC Vr54xx helpers from op_helper.c to a new file:
'vr54xx_helper.c'.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-14-f4bug@amsat.org>

show more ...

target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failed

Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.

Tested-by: Philippe Mathieu-

target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failed

Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>

show more ...

target/mips: Move TCG source files under tcg/ sub directory

To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.

The following prototypes:
- mip

target/mips: Move TCG source files under tcg/ sub directory

To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.

The following prototypes:
- mips_tcg_init()
- mips_cpu_do_unaligned_access()
- mips_cpu_do_transaction_failed()
can now be restricted to the "tcg-internal.h" header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-29-f4bug@amsat.org>

show more ...

target/mips: Move exception management code to exception.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428

target/mips: Move exception management code to exception.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-27-f4bug@amsat.org>

show more ...

target/mips: Move TLB management helpers to tcg/sysemu/tlb_helper.c

Move TLB management helpers to tcg/sysemu/tlb_helper.c.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-

target/mips: Move TLB management helpers to tcg/sysemu/tlb_helper.c

Move TLB management helpers to tcg/sysemu/tlb_helper.c.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-26-f4bug@amsat.org>

show more ...

target/mips: Move helper_cache() to tcg/sysemu/special_helper.c

Move helper_cache() to tcg/sysemu/special_helper.c.

The CACHE opcode is privileged and is not accessible in user
emulation. However w

target/mips: Move helper_cache() to tcg/sysemu/special_helper.c

Move helper_cache() to tcg/sysemu/special_helper.c.

The CACHE opcode is privileged and is not accessible in user
emulation. However we get a link failure when restricting the
symbol to sysemu. For now, add a stub helper to satisfy linking,
which abort if ever called.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-25-f4bug@amsat.org>

show more ...

target/mips: Move Special opcodes to tcg/sysemu/special_helper.c

Move the Special opcodes helpers to tcg/sysemu/special_helper.c.

Since mips_io_recompile_replay_branch() is set as
CPUClass::io_reco

target/mips: Move Special opcodes to tcg/sysemu/special_helper.c

Move the Special opcodes helpers to tcg/sysemu/special_helper.c.

Since mips_io_recompile_replay_branch() is set as
CPUClass::io_recompile_replay_branch handler in cpu.c,
we need to declare its prototype in "tcg-internal.h".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-24-f4bug@amsat.org>

show more ...

target/mips: Extract load/store helpers to ldst_helper.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <2021042817

target/mips: Extract load/store helpers to ldst_helper.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-11-f4bug@amsat.org>

show more ...

target/mips: Merge do_translate_address into cpu_mips_translate_address

Currently cpu_mips_translate_address() calls raise_mmu_exception(),
and do_translate_address() calls cpu_loop_exit_restore().

target/mips: Merge do_translate_address into cpu_mips_translate_address

Currently cpu_mips_translate_address() calls raise_mmu_exception(),
and do_translate_address() calls cpu_loop_exit_restore().

This API split is dangerous, we could call cpu_mips_translate_address
without returning to the main loop.

As there is only one caller, it is trivial (and safer) to merge
do_translate_address() back to cpu_mips_translate_address().

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-10-f4bug@amsat.org>

show more ...

target/mips: Declare mips_env_set_pc() inlined in "internal.h"

Rename set_pc() as mips_env_set_pc(), declare it inlined
and use it in cpu.c and op_helper.c.

Reported-by: Richard Henderson <richard.

target/mips: Declare mips_env_set_pc() inlined in "internal.h"

Rename set_pc() as mips_env_set_pc(), declare it inlined
and use it in cpu.c and op_helper.c.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210428170410.479308-9-f4bug@amsat.org>

show more ...

target/mips: Let do_translate_address() take MMUAccessType argument

The single caller, HELPER_LD_ATOMIC(), passes MMUAccessType to
do_translate_address(). Let the prototype use it as argument,
as it

target/mips: Let do_translate_address() take MMUAccessType argument

The single caller, HELPER_LD_ATOMIC(), passes MMUAccessType to
do_translate_address(). Let the prototype use it as argument,
as it is stricter than an integer.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-9-f4bug@amsat.org>

show more ...

target/mips: Replace magic value by MMU_DATA_LOAD definition

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun

target/mips: Replace magic value by MMU_DATA_LOAD definition

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-7-f4bug@amsat.org>

show more ...

target/mips: Extract MSA helpers from op_helper.c

We have ~400 lines of MSA helpers in the generic op_helper.c,
move them with the other helpers in 'msa_helper.c'.

Signed-off-by: Philippe Mathieu-D

target/mips: Extract MSA helpers from op_helper.c

We have ~400 lines of MSA helpers in the generic op_helper.c,
move them with the other helpers in 'msa_helper.c'.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-5-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>

show more ...

target/mips: Extract FPU helpers to 'fpu_helper.h'

Extract FPU specific helpers from "internal.h" to "fpu_helper.h".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Phi

target/mips: Extract FPU helpers to 'fpu_helper.h'

Extract FPU specific helpers from "internal.h" to "fpu_helper.h".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120210844.2625602-2-f4bug@amsat.org>

show more ...

target/mips: Remove unused headers from op_helper.c

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.

target/mips: Remove unused headers from op_helper.c

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-6-f4bug@amsat.org>

show more ...

target/mips: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurre

target/mips: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

target/mips/op_helper: Log unimplemented cache opcode

In case the guest uses a cache opcode we are not expecting,
log it to give us a chance to notice it, in case we should
actually do something.

S

target/mips/op_helper: Log unimplemented cache opcode

In case the guest uses a cache opcode we are not expecting,
log it to give us a chance to notice it, in case we should
actually do something.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-4-f4bug@amsat.org>

show more ...

target/mips/op_helper: Document Invalidate/Writeback opcodes as no-op

QEMU does not model caches, so there is not much to do with the
Invalidate/Writeback opcodes. Make it explicit adding a comment.

target/mips/op_helper: Document Invalidate/Writeback opcodes as no-op

QEMU does not model caches, so there is not much to do with the
Invalidate/Writeback opcodes. Make it explicit adding a comment.

Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-3-f4bug@amsat.org>

show more ...

target/mips/op_helper: Convert multiple if() to switch case

The cache operation is encoded in bits [20:18] of the instruction.
The 'op' argument of helper_cache() contains the bits [20:16].
Extract

target/mips/op_helper: Convert multiple if() to switch case

The cache operation is encoded in bits [20:18] of the instruction.
The 'op' argument of helper_cache() contains the bits [20:16].
Extract the 3 bits and parse them using a switch case. This allow
us to handle multiple cache types (the cache type is encoded in
bits [17:16]).

Previously the if() block was only checking the D-Cache (Primary
Data or Unified Primary). Now we also handle the I-Cache (Primary
Instruction), S-Cache (Secondary) and T-Cache (Terciary).

Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-2-f4bug@amsat.org>

show more ...

target/mips: Separate FPU-related helpers into their own file

For clarity and easier maintenence, create target/mips/fpu_helper.c, and
move all FPU-related content form target/mips/op_helper.c to th

target/mips: Separate FPU-related helpers into their own file

For clarity and easier maintenence, create target/mips/fpu_helper.c, and
move all FPU-related content form target/mips/op_helper.c to that file.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <1580745443-24650-3-git-send-email-aleksandar.markovic@rt-rk.com>

show more ...

target/mips: Separate CP0-related helpers into their own file

For clarity and easier maintenence, create target/mips/cp0_helper.c, and
move all CP0-related content form target/mips/op_helper.c to th

target/mips: Separate CP0-related helpers into their own file

For clarity and easier maintenence, create target/mips/cp0_helper.c, and
move all CP0-related content form target/mips/op_helper.c to that file.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <1580745443-24650-2-git-send-email-aleksandar.markovic@rt-rk.com>

show more ...

target/mips: Fix handling of LL/SC instructions after 7dd547e5ab

After 7dd547e5ab6b31e7a0cfc182d3ad131dd55a948f the env->llval value
is loaded as an unsigned value (instead of sign-extended as befor

target/mips: Fix handling of LL/SC instructions after 7dd547e5ab

After 7dd547e5ab6b31e7a0cfc182d3ad131dd55a948f the env->llval value
is loaded as an unsigned value (instead of sign-extended as before).
Therefore, the CMPXCHG in gen_st_cond() in translate.c fails if the
sign bit is set in the loaded value.

Fix this by sign-extending the llval value for the 32-bit case.

I discovered this issue because FreeBSD MIPS64 was looping forever
in an atomic helper function when trying to start /sbin/init.

Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Fixes: 7dd547e5ab ("target/mips: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX")
Buglink: https://bugs.launchpad.net/qemu/+bug/1861605
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Markovic <amarkovic@wavecomp.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200202153409.28534-1-jrtc27@jrtc27.com>

show more ...