Merge tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging

hppa 64-bit mfdiag improvements

The 64-bit hppa qemu emulation still fails to boot 64-bit HP

Merge tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging

hppa 64-bit mfdiag improvements

The 64-bit hppa qemu emulation still fails to boot 64-bit HP-UX.
This patch series improves the emulation a lot, since it enables us to boot
64-bit HP-UX installer silently up until an endless loop where the machine
reports that it's up an running (it crashed before). This still needs further
analysis, but it's a big step forward.

Main changes to archieve this includes:
- Implementing diagnose registers (especially %dr2 for space-register hashing)
- a new SeaBIOS-hppa version 18, which includes those fixes and enhancements:
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value
- Allow up to 256 GB RAM on 64-bit machines

V2:
- fix linux-user build by adding missing "#ifndef CONFIG_USER_ONLY ... #endif"

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5yWTwAKCRD3ErUQojoP
# X1p5AP4iSfKlBsUZrww2/M1ArqB9jZuJBO1kdZ7OcCN2Jn0yxgEAx0CPUof7NnZV
# EY7u3Qq4E8ZnOk4XgHt06bsdNcJN+gc=
# =RoAh
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 Jan 2025 04:22:23 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 18
target/hppa: Implement space register hashing for 64-bit HP-UX
target/hppa: 64-bit CPUs start with space register hashing enabled
target/hppa: Add instruction decoding for mfdiag and mtdiag
target/hppa: Drop diag_getshadowregs_pa2 and diag_putshadowregs_pa2
target/hppa: Add CPU diagnose registers
disas/hppa: implement mfdiag/mtdiag disassembly
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
MAINTAINERS: Add myself as HPPA maintainer

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/hppa: Implement space register hashing for 64-bit HP-UX

The Linux kernel turns space-register hashing off unconditionally at
bootup. That code was provided by HP at the beginning of the PA-R

target/hppa: Implement space register hashing for 64-bit HP-UX

The Linux kernel turns space-register hashing off unconditionally at
bootup. That code was provided by HP at the beginning of the PA-RISC
Linux porting effort, and I don't know why it was decided then why Linux
should not use space register hashing.
32-bit HP-UX versions seem to not use space register hashing either.

But for 64-bit HP-UX versions, Sven Schnelle noticed that space register
hashing needs to be enabled and is required, otherwise the HP-UX kernel
will crash badly.

On 64-bit CPUs space register hashing is controlled by a bit in diagnose
register %dr2. Since we want to support Linux and 32- and 64-bit HP-UX,
we need to fully emulate the diagnose registers and handle specifically
the bit in %dr2.

This patch adds the code to calculate the gva memory mask based on the
space-register hashing bit in %dr2 and the PSW_W (64-bit) flag.
The value is cached in the gva_offset_mask variable in CPUArchState
and recalculated at every modification of the CPU PSW or %dr2.

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Sven Schnelle <svens@stackframe.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'pull-hppa-20240515' of https://gitlab.com/rth7680/qemu into staging

target/hppa:
- Use TCG_COND_TST where applicable.
- Use CF_BP_PAGE instead of a local breakpoint search.
- Clean

Merge tag 'pull-hppa-20240515' of https://gitlab.com/rth7680/qemu into staging

target/hppa:
- Use TCG_COND_TST where applicable.
- Use CF_BP_PAGE instead of a local breakpoint search.
- Clean up IAOQ handling during translation.
- Implement CF_PCREL.
- Implement PSW.B.
- Implement PSW.X.
- Log cpu state on interrupt and rfi.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZEgnwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+43gf8CakQdMSqfGV2nGP+
# 7wWZOAV04IyfkJ38F/CH0ihUkblEOzXJ1shTFkrHEw257j0D10MctSSbjrqz5BwU
# obQcwoVlxzTGXqzhkZ6wagkcqjv3TtlPtznZIk6JssdlrtwIKDmE2/3t1dzHnyBD
# WTrS0SK3YvVRovq/ai51raUbiBsNq7XG3skHEsMKsFxp4EaDP5JTbputdQWdffjh
# TBmXImhHC3gm09KWIUZwfEBHlaa7YXk2orzB8kBE8S2kQj9vrGXEaC4jYnBcQLPw
# NDDkBYRqxHYQr0vIAHee+5cUgt1jDBr5rXnAnJwzK0wyEEc4Mi4OTPhNE604iu2y
# SDxS8Q==
# =A4Qf
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 May 2024 11:38:04 AM CEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-hppa-20240515' of https://gitlab.com/rth7680/qemu: (43 commits)
target/hppa: Log cpu state on return-from-interrupt
target/hppa: Log cpu state at interrupt
target/hppa: Implement CF_PCREL
target/hppa: Adjust priv for B,GATE at runtime
target/hppa: Drop tlb_entry return from hppa_get_physical_address
target/hppa: Implement PSW_X
target/hppa: Implement PSW_B
target/hppa: Manage PSW_X and PSW_B in translator
target/hppa: Split PSW X and B into their own field
target/hppa: Improve hppa_cpu_dump_state
target/hppa: Do not mask in copy_iaoq_entry
target/hppa: Store full iaoq_f and page offset of iaoq_b in TB
linux-user/hppa: Force all code addresses to PRIV_USER
target/hppa: Use delay_excp for conditional trap on overflow
target/hppa: Use delay_excp for conditional traps
target/hppa: Introduce DisasDelayException
target/hppa: Remove cond_free
target/hppa: Use TCG_COND_TST* in trans_ftest
target/hppa: Use registerfields.h for FPSR
target/hppa: Use TCG_COND_TST* in trans_bb_imm
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/hppa: Adjust priv for B,GATE at runtime

Do not compile in the priv change based on the first translation;
look up the PTE at execution time. This is required for CF_PCREL,
where a page may b

target/hppa: Adjust priv for B,GATE at runtime

Do not compile in the priv change based on the first translation;
look up the PTE at execution time. This is required for CF_PCREL,
where a page may be mapped multiple times with different attributes.

Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/hppa: Use delay_excp for conditional trap on overflow

Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Use delay_excp for conditional traps

Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-pa-20240329' of https://gitlab.com/rth7680/qemu into staging

target/hppa: Fix BE,L set of sr0
target/hppa: Fix B,GATE for wide mode
target/hppa: Mark interval timer write as io
targe

Merge tag 'pull-pa-20240329' of https://gitlab.com/rth7680/qemu into staging

target/hppa: Fix BE,L set of sr0
target/hppa: Fix B,GATE for wide mode
target/hppa: Mark interval timer write as io
target/hppa: Fix EIRR, EIEM versus icount
target/hppa: Fix DCOR reconstruction of carry bits
target/hppa: Fix unit carry conditions
target/hppa: Fix overflow computation for shladd
target/hppa: Add diag instructions to set/restore shadow registers
target/hppa: Clear psw_n for BE on use_nullify_skip path

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYHQPEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/lpwf+PRmKNguclUYZ5Pub
# kVxeylyTGdiYieDfv4RxSnkQbmfiJdwhr+lRUiiA/AfK2IFMTC56Wn0URAdvpFxG
# MuI9r7t8Z640KwVnF9GTau0JagU/GXYorYdO7WY/PMvrgjeRukjMqb0Sgnoknlqw
# LuPUu6+Z+zMMNLT69WNfbcYIqdHcb2iP5Tr3yWGRKywu8+zM9q/fL7GEi+5GEB6Y
# bljjv03hpzKPyZg6UCwQzoeDnIfUpefrghkwzenPKmoWzuLSohmG+Q7Cnp4WiGMg
# 3HX7+LVCXXW4OOHu0syf3M/cG6zGfH7kBTvq4CNKjNeeqz/g2qwNTPO1xfOr7f5w
# zsUf/Q==
# =fcSC
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Mar 2024 22:30:09 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-pa-20240329' of https://gitlab.com/rth7680/qemu:
target/hppa: Clear psw_n for BE on use_nullify_skip path
target/hppa: Add diag instructions to set/restore shadow registers
target/hppa: Move diag argument handling to decodetree
target/hppa: Generate getshadowregs inline
target/hppa: Fix overflow computation for shladd
target/hppa: Replace c with uv in do_cond
target/hppa: Squash d for pa1.x during decode
target/hppa: Fix unit carry conditions
target/hppa: Optimize UADDCM with no condition
target/hppa: Fix DCOR reconstruction of carry bits
target/hppa: Use gva_offset_mask() everywhere
target/hppa: Fix EIRR, EIEM versus icount
target/hppa: Tidy read of interval timer
target/hppa: Mark interval timer write as io
target/hppa: Fix ADD/SUB trap on overflow for narrow mode
target/hppa: Handle unit conditions for wide mode
target/hppa: Fix B,GATE for wide mode
target/hppa: Fix BE,L set of sr0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/hppa: Generate getshadowregs inline

This operation is trivial and does not require a helper.

Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@lin

target/hppa: Generate getshadowregs inline

This operation is trivial and does not require a helper.

Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/hppa: Fix EIRR, EIEM versus icount

Call translator_io_start before write to EIRR.
Move evaluation of EIRR vs EIEM to hppa_cpu_exec_interrupt.
Exit TB after write to EIEM, but otherwise use a

target/hppa: Fix EIRR, EIEM versus icount

Call translator_io_start before write to EIRR.
Move evaluation of EIRR vs EIEM to hppa_cpu_exec_interrupt.
Exit TB after write to EIEM, but otherwise use a straight store.

Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa into staging

target/hppa: Enhancements and fixes

Some enhancements and fixes for the hppa target.

The major change is, that

Merge tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa into staging

target/hppa: Enhancements and fixes

Some enhancements and fixes for the hppa target.

The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
# X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
# CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
# =RA0B
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 23:47:13 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa/machine: Load 64-bit firmware on 64-bit machines
target/hppa: Update SeaBIOS-hppa to version 16
hw/net/tulip: add chip status register values
target/hppa: PDC_BTLB_INFO uses 32-bit ints
target/hppa: Allow read-access to PSW with rsm 0,reg instruction
lasi: Add reset I/O ports for LASI audio and FDC
target/hppa: Implement do_transaction_failed handler for I/O errors
lasi: allow access to LAN MAC address registers
hw/pci-host/astro: Implement Hard Fail and Soft Fail mode
hw/pci-host/astro: Avoid aborting on access failure
target/hppa: Add "diag 0x101" for console output support
disas/hppa: Add disassembly for qemu specific instructions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/hppa: Add "diag 0x101" for console output support

For debugging purposes at the early stage of the bootup process,
the SeaBIOS-hppa firmware sometimes needs to output characters to the
serial

target/hppa: Add "diag 0x101" for console output support

For debugging purposes at the early stage of the bootup process,
the SeaBIOS-hppa firmware sometimes needs to output characters to the
serial console. Note that the serial console is the default output
method for parisc machines.

At this stage PCI busses and other devices haven't been initialized
yet. So, SeaBIOS-hppa will not be able to find the correct I/O ports
for the serial ports yet.

Instead, add an emulation for the "diag 0x101" opcode to assist here.
Without any other dependencies, SeaBIOS-hppa can then load the character
to be printed in register %r26 and issue the diag assembly instruction.

The qemu diag_console_output() helper function will then print
that character to the first serial port.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging

target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700

#

Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging

target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/hppa: Add pa2.0 cpu local tlb flushes

The previous decoding misnamed the bit it called "local".
Other than the name, the implementation was correct for pa1.x.
Rename this field to "tlbe".

PA

target/hppa: Add pa2.0 cpu local tlb flushes

The previous decoding misnamed the bit it called "local".
Other than the name, the implementation was correct for pa1.x.
Rename this field to "tlbe".

PA2.0 adds (a real) local bit to PxTLB, and also adds a range
of pages to flush in GR[b].

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/hppa: Implement HSHLADD, HSHRADD

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Implement HAVG

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Implement HSUB

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Implement HADD

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Remove TARGET_REGISTER_BITS

Rely only on TARGET_LONG_BITS, fixed at 64, and hppa_is_pa20.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Implement IDTLBT, IITLBT

Rename the existing insert tlb helpers to emphasize that they
are for pa1.1 cpus. Implement a combined i/d tlb for pa2.0.
Still missing is the new 'P' tlb bit.

target/hppa: Implement IDTLBT, IITLBT

Rename the existing insert tlb helpers to emphasize that they
are for pa1.1 cpus. Implement a combined i/d tlb for pa2.0.
Still missing is the new 'P' tlb bit.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/hppa: Implement STDBY

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa into staging

Block-TLB support and linux-user fixes for hppa target

All 32-bit hppa CPUs allow a fixed number of TLB entri

Merge tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa into staging

Block-TLB support and linux-user fixes for hppa target

All 32-bit hppa CPUs allow a fixed number of TLB entries to have a
different page size than the default 4k.
Those are called "Block-TLBs" and are created at startup by the
operating system and managed by the firmware of hppa machines
through the firmware PDC_BLOCK_TLB call.

This patchset adds the necessary glue to SeaBIOS-hppa and
qemu to allow up to 16 BTLB entries in the emulation.

Two patches from Mikulas Patocka fix signal delivery issues
in linux-user on hppa.

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQnz0wAKCRD3ErUQojoP
# X6NDAP9F1Huhceot8peohGodRDOhnXWfDcjQZSDvadieKv/rJQEA60Z5QV5VlQgw
# SyUT4AcoiB7N4nvS+iDa+6dKfRH/YQM=
# =kqqt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Sep 2023 15:17:39 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa:
linux-user/hppa: lock both words of function descriptor
linux-user/hppa: clear the PSW 'N' bit when delivering signals
target/hppa: Wire up diag instruction to support BTLB
target/hppa: Extract diagnose immediate value
target/hppa: Add BTLB support to hppa TLB functions
target/hppa: Report and clear BTLBs via fw_cfg at startup
target/hppa: Allow up to 16 BTLB entries
target/hppa: Update to SeaBIOS-hppa version 9

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/hppa: Wire up diag instruction to support BTLB

Wire up the hppa diag instruction to support Block-TLBs
when called with the 0x100 value.

The diag_btlb() helper function does all necessary st

target/hppa: Wire up diag instruction to support BTLB

Wire up the hppa diag instruction to support Block-TLBs
when called with the 0x100 value.

The diag_btlb() helper function does all necessary steps
to emulate the PDC BTLB firmware function, which includes
providing BTLB info, adding a new BTLB, deleting a BTLB
and removing all BTLBs.

Signed-off-by: Helge Deller <deller@gmx.de>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220228' into staging

Fix typecode generation for tcg helpers
Fix single stepping into interrupt handlers
Fix out-of-range offsets for

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220228' into staging

Fix typecode generation for tcg helpers
Fix single stepping into interrupt handlers
Fix out-of-range offsets for stores in TCI

# gpg: Signature made Mon 28 Feb 2022 18:07:13 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20220228:
tcg/tci: Use tcg_out_ldst in tcg_out_st
accel/tcg/cpu-exec: Fix precise single-stepping after interrupt
tcg: Remove dh_alias indirection for dh_typecode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tcg: Remove dh_alias indirection for dh_typecode

The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because

tcg: Remove dh_alias indirection for dh_typecode

The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because they are the same size. However, we need to retain this
distinction for dh_typecode, lest we fail to extend abi types properly
for the host call parameters.

This bug was detected when running the 'arm' emulator on an s390
system. The s390 uses TCG_TARGET_EXTEND_ARGS which triggers code
in tcg_gen_callN to extend 32 bit values to 64 bits; the incorrect
sign data in the typemask for each argument caused the values to be
extended as unsigned values.

This simple program exhibits the problem:

static volatile int num = -9;
static volatile int den = -5;
int main(void)
{
int quo = num / den;
printf("num %d den %d quo %d\n", num, den, quo);
exit(0);
}

When run on the broken qemu, this results in:

num -9 den -5 quo 0

The correct result is:

num -9 den -5 quo 1

Fixes: 7319d83a735 ("tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/876
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging

Fixes and updates for hppa target

This patchset fixes some important bugs in the hppa artist graphics driv

Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging

Fixes and updates for hppa target

This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic

and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button

A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware

Signed-off-by: Helge Deller <deller@gmx.de>

# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...