hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()

This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symb

hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()

This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symbol table during kernel loading.

The pointer is ignored, if supplied with flat (non-elf) firmware image.

The Spike board requires it locate the HTIF symbols from firmware ELF
passed via "-bios" option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-2-anup.patel@wdc.com
Message-Id: <20200427080644.168461-2-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Generate correct "mmu-type" for 32-bit machines

32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32".

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Fra

hw/riscv: Generate correct "mmu-type" for 32-bit machines

32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32".

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

riscv/sifive_u: Add a serial property to the sifive_u machine

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the s

riscv/sifive_u: Add a serial property to the sifive_u machine

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to specify the board serial
number. When not given, the default serial number 1 is used.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com>
[ Changed by AF:
- Use the SoC's serial property to pass the info to the SoC
- Fixup commit title
- Rebase on file restructuring
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

riscv/sifive_u: Add a serial property to the sifive_u SoC

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the seria

riscv/sifive_u: Add a serial property to the sifive_u SoC

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to the sifive_u SoC to specify
the board serial number. When not given, the default serial number
1 is used.

Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

riscv/sifive_u: Fix up file ordering

Split the file into clear machine and SoC sections.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2020-04-29' into staging

Miscellaneous patches for 2020-04-29

# gpg: Signature made Wed 29 Apr 2020 07:42:52 BST
# gpg: us

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2020-04-29' into staging

Miscellaneous patches for 2020-04-29

# gpg: Signature made Wed 29 Apr 2020 07:42:52 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2020-04-29: (32 commits)
qemu-option: pass NULL rather than 0 to the id of qemu_opts_set()
libqos: Give get_machine_allocator() internal linkage
fuzz: Simplify how we compute available machines and types
Makefile: Drop unused, broken target recurse-fuzz
smbus: Fix spd_data_generate() for number of banks > 2
bamboo, sam460ex: Tidy up error message for unsupported RAM size
smbus: Fix spd_data_generate() error API violation
sam460ex: Suppress useless warning on -m 32 and -m 64
qga: Fix qmp_guest_suspend_{disk, ram}() error handling
qga: Fix qmp_guest_get_memory_blocks() error handling
tests/test-logging: Fix test for -dfilter 0..0xffffffffffffffff
migration/colo: Fix qmp_xen_colo_do_checkpoint() error handling
io: Fix qio_channel_socket_close() error handling
xen/pt: Fix flawed conversion to realize()
virtio-net: Fix duplex=... and speed=... error handling
bochs-display: Fix vgamem=SIZE error handling
fdc: Fix fallback=auto error handling
arm/virt: Fix virt_machine_device_plug_cb() error API violation
cpus: Proper range-checking for -icount shift=N
cpus: Fix configure_icount() error API violation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

various: Remove suspicious '\' character outside of #define in C code

Fixes the following coccinelle warnings:

$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_er

various: Remove suspicious '\' character outside of #define in C code

Fixes the following coccinelle warnings:

$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cl

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)

# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: Let devices own the MemoryRegion they create

Avoid orphan memory regions being added in the /unattached QOM
container.

This commit was produced with the Coccinelle script
scripts/coccinel

hw/riscv: Let devices own the MemoryRegion they create

Avoid orphan memory regions being added in the /unattached QOM
container.

This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf5' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 5

This tag contains the last of the patches I'd like to target

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf5' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 5

This tag contains the last of the patches I'd like to target for the 5.0 soft
freeze. At this point we're mostly collecting fixes, but there are a few new
features. The changes include:

* An OpenSBI update, including the various bits necessary to put CI together
and an image for the 32-bit sifive_u board.
* A fix that disallows TSR when outside of machine mode.
* A fix for VS-mode interrupt forwarding.

# gpg: Signature made Tue 17 Mar 2020 03:59:58 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* remotes/palmer/tags/riscv-for-master-5.0-sf5:
target/riscv: Fix VS mode interrupts forwarding.
gitlab-ci.yml: Add jobs to build OpenSBI firmware binaries
riscv: sifive_u: Update BIOS_FILENAME for 32-bit
roms: opensbi: Add 32-bit firmware image for sifive_u machine
roms: opensbi: Upgrade from v0.5 to v0.6
target/riscv: Correctly implement TSR trap

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

riscv: sifive_u: Update BIOS_FILENAME for 32-bit

Update BIOS_FILENAME to consider 32-bit bios image file name.

Tested booting Linux v5.5 32-bit image (built from rv32_defconfig
plus CONFIG_SOC_SIFI

riscv: sifive_u: Update BIOS_FILENAME for 32-bit

Update BIOS_FILENAME to consider 32-bit bios image file name.

Tested booting Linux v5.5 32-bit image (built from rv32_defconfig
plus CONFIG_SOC_SIFIVE) with the default 32-bit bios image.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf3' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 3

This pull request is almost entirely an implementation of the

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf3' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 3

This pull request is almost entirely an implementation of the draft hypervisor
extension. This extension is still in draft and is expected to have
incompatible changes before being frozen, but we've had good luck managing
other RISC-V draft extensions in QEMU so far.

Additionally, there's a fix to PCI addressing and some improvements to the
M-mode timer.

This boots linux and passes make check for me.

# gpg: Signature made Tue 03 Mar 2020 00:23:20 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* remotes/palmer/tags/riscv-for-master-5.0-sf3: (38 commits)
hw/riscv: Provide rdtime callback for TCG in CLINT emulation
target/riscv: Emulate TIME CSRs for privileged mode
riscv: virt: Allow PCI address 0
target/riscv: Allow enabling the Hypervisor extension
target/riscv: Add the MSTATUS_MPV_ISSET helper macro
target/riscv: Add support for the 32-bit MSTATUSH CSR
target/riscv: Set htval and mtval2 on execptions
target/riscv: Raise the new execptions when 2nd stage translation fails
target/riscv: Implement second stage MMU
target/riscv: Allow specifying MMU stage
target/riscv: Respect MPRV and SPRV for floating point ops
target/riscv: Mark both sstatus and msstatus_hs as dirty
target/riscv: Disable guest FP support based on virtual status
target/riscv: Only set TB flags with FP status if enabled
target/riscv: Remove the hret instruction
target/riscv: Add hfence instructions
target/riscv: Add Hypervisor trap return support
target/riscv: Add hypvervisor trap support
target/riscv: Generate illegal instruction on WFI when V=1
target/ricsv: Flush the TLB on virtulisation mode changes
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: Provide rdtime callback for TCG in CLINT emulation

This patch extends CLINT emulation to provide rdtime callback for
TCG. This rdtime callback will be called wheneven TIME CSRs are
read in

hw/riscv: Provide rdtime callback for TCG in CLINT emulation

This patch extends CLINT emulation to provide rdtime callback for
TCG. This rdtime callback will be called wheneven TIME CSRs are
read in privileged modes.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf1' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 1

This patch set contains a handful of collected fixes that I'd

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf1' into staging

RISC-V Patches for the 5.0 Soft Freeze, Part 1

This patch set contains a handful of collected fixes that I'd like to target
for the 5.0 soft freeze (I know that's a long way away, I just don't know what
else to call these):

* A fix for a memory leak initializing the sifive_u board.
* Fixes to privilege mode emulation related to interrupts and fstatus.

Notably absent is the H extension implementation. That's pretty much reviewed,
but not quite ready to go yet and I didn't want to hold back these important
fixes. This boots 32-bit and 64-bit Linux (buildroot this time, just for fun)
and passes "make check".

# gpg: Signature made Tue 21 Jan 2020 22:55:28 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* remotes/palmer/tags/riscv-for-master-5.0-sf1:
target/riscv: update mstatus.SD when FS is set dirty
target/riscv: fsd/fsw doesn't dirty FP state
target/riscv: Fix tb->flags FS status
riscv: Set xPIE to 1 after xRET
riscv/sifive_u: fix a memory leak in soc_realize()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

riscv/sifive_u: fix a memory leak in soc_realize()

Fix a minor memory leak in riscv_sifive_u_soc_realize()

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan

riscv/sifive_u: fix a memory leak in soc_realize()

Fix a minor memory leak in riscv_sifive_u_soc_realize()

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc3' into staging

RISC-V Patches for 4.2-rc3

This tag contains two patches that I'd like to target for 4.2-rc3:

* A fix to th

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc3' into staging

RISC-V Patches for 4.2-rc3

This tag contains two patches that I'd like to target for 4.2-rc3:

* A fix to the DT entry for the SiFive test finisher.
* A fix to the spike board's HTIF interface.

This passes "make check" and boots OE for me.

# gpg: Signature made Mon 25 Nov 2019 20:51:13 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.2-rc3:
hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()
RISC-V: virt: This is a "sifive,test1" test finisher

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()

This patch adds an optional function pointer, "sym_cb", to
riscv_load_kernel() which provides the possibility to access the symbol
t

hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()

This patch adds an optional function pointer, "sym_cb", to
riscv_load_kernel() which provides the possibility to access the symbol
table during kernel loading.

The pointer is ignored, if supplied with Image or uImage file.

The Spike board requires the access to locate the HTIF symbols.

Fixes: 0ac24d56c5e7 ("hw/riscv: Split out the boot functions")
Buglink: https://bugs.launchpad.net/qemu/+bug/1835827
Signed-off-by: Siwei Zhuang <siwei.zhuang@data61.csiro.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf2' into staging

RISC-V Patches for the 4.2 Soft Freeze, Part 2

This patch set contains a handful of small fixes for RISC-V t

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf2' into staging

RISC-V Patches for the 4.2 Soft Freeze, Part 2

This patch set contains a handful of small fixes for RISC-V targets that
I'd like to target for the 4.2 soft freeze. They include:

* A fix to allow the debugger to access the state of all privilege
modes, as opposed to just the currently executing one.
* A pair of cleanups to implement cpu_do_transaction_failed.
* Fixes to the device tree.
* The addition of various memory regions to make the sifive_u machine
more closely match the HiFive Unleashed board.
* Fixes to our GDB interface to allow CSRs to be accessed.
* A fix to a memory leak pointed out by coverity.
* A fix that prevents PMP checks from firing incorrectly.

This passes "make chcek" and boots Open Embedded for me.

# gpg: Signature made Mon 28 Oct 2019 15:47:52 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.2-sf2:
target/riscv: PMP violation due to wrong size parameter
riscv/boot: Fix possible memory leak
target/riscv: Make the priv register writable by GDB
target/riscv: Expose "priv" register for GDB for reads
target/riscv: Tell gdbstub the correct number of CSRs
riscv/virt: Jump to pflash if specified
riscv/virt: Add the PFlash CFI01 device
riscv/virt: Manually define the machine
riscv/sifive_u: Add the start-in-flash property
riscv/sifive_u: Manually define the machine
riscv/sifive_u: Add QSPI memory region
riscv/sifive_u: Add L2-LIM cache memory
linux-user/riscv: Propagate fault address
riscv: sifive_u: Add ethernet0 to the aliases node
riscv: hw: Drop "clock-frequency" property of cpu nodes
RISC-V: Implement cpu_do_transaction_failed
RISC-V: Handle bus errors in the page table walker
riscv: Skip checking CSR privilege level in debugger mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

riscv/sifive_u: Add the start-in-flash property

Add a property that when set to true QEMU will jump from the ROM code to
the start of flash memory instead of DRAM which is the default
behaviour.

Si

riscv/sifive_u: Add the start-in-flash property

Add a property that when set to true QEMU will jump from the ROM code to
the start of flash memory instead of DRAM which is the default
behaviour.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv/sifive_u: Manually define the machine

Instead of using the DEFINE_MACHINE() macro to define the machine let's
do it manually. This allows us to specify machine properties.

This patch is no fu

riscv/sifive_u: Manually define the machine

Instead of using the DEFINE_MACHINE() macro to define the machine let's
do it manually. This allows us to specify machine properties.

This patch is no functional change.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv/sifive_u: Add QSPI memory region

The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no
model of this in QEMU, so to allow boot firmware developers to use QEMU
to target the

riscv/sifive_u: Add QSPI memory region

The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no
model of this in QEMU, so to allow boot firmware developers to use QEMU
to target the Unleashed let's add a chunk of memory to represent the QSPI0
memory mapped flash. This can be targeted using QEMU's -device loader
command line option.

In the future we can look at adding a model for the is25wp256 flash.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv/sifive_u: Add L2-LIM cache memory

On reset only a single L2 cache way is enabled, the others are exposed
as memory that can be used by early boot firmware. This L2 region is
generally disabled

riscv/sifive_u: Add L2-LIM cache memory

On reset only a single L2 cache way is enabled, the others are exposed
as memory that can be used by early boot firmware. This L2 region is
generally disabled using the WayEnable register at a later stage in the
boot process. To allow firmware to target QEMU and the HiFive Unleashed
let's add the L2 LIM (LooselyIntegrated Memory).

Ideally we would want to adjust the size of this chunk of memory as the
L2 Cache Controller WayEnable register is incremented. Unfortunately I
don't see a nice way to handle reducing or blocking out the L2 LIM while
still allowing it be re returned to all enabled from a reset.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv: sifive_u: Add ethernet0 to the aliases node

U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.

This is to keep in sync with Linux kernel commit

riscv: sifive_u: Add ethernet0 to the aliases node

U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.

This is to keep in sync with Linux kernel commit below:
https://patchwork.kernel.org/patch/11133033/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv: hw: Drop "clock-frequency" property of cpu nodes

The "clock-frequency" property of cpu nodes isn't required. Drop it.

This is to keep in sync with Linux kernel commit below:
https://patchwor

riscv: hw: Drop "clock-frequency" property of cpu nodes

The "clock-frequency" property of cpu nodes isn't required. Drop it.

This is to keep in sync with Linux kernel commit below:
https://patchwork.kernel.org/patch/11133031/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf1-v3' into staging

RISC-V Patches for the 4.2 Soft Freeze, Part 1, v3

This contains quite a few patches that I'd like to tar

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf1-v3' into staging

RISC-V Patches for the 4.2 Soft Freeze, Part 1, v3

This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:

* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.

This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.

This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.

Changes since v2 (never made it to the list):

* Sets the sifive_u machine default core count to 2 instead of 5.

Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:

* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.

# gpg: Signature made Tue 17 Sep 2019 16:43:30 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.2-sf1-v3: (48 commits)
gdbstub: riscv: fix the fflags registers
target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point
target/riscv: Fix mstatus dirty mask
target/riscv: Use both register name and ABI name
riscv: sifive_u: Update model and compatible strings in device tree
riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
riscv: sifive_u: Fix broken GEM support
riscv: sifive_u: Instantiate OTP memory with a serial number
riscv: sifive: Implement a model for SiFive FU540 OTP
riscv: roms: Update default bios for sifive_u machine
riscv: sifive_u: Change UART node name in device tree
riscv: sifive_u: Update UART base addresses and IRQs
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
riscv: sifive_u: Add PRCI block to the SoC
riscv: sifive_u: Generate hfclk and rtcclk nodes
riscv: sifive: Implement PRCI model for FU540
riscv: sifive_u: Update PLIC hart topology configuration string
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
riscv: sifive_u: Set the minimum number of cpus to 2
riscv: hart: Add a "hartid-base" property to RISC-V hart array
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...