ppc/spapr: Use proper HPTE accessors for H_READ

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190411080004.8690-3-clg

ppc/spapr: Use proper HPTE accessors for H_READ

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190411080004.8690-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190319' into staging

ppc patch queue for 2019-03-19

This is a small set, it has a number of fixes and a couple of minor
cleanups to

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190319' into staging

ppc patch queue for 2019-03-19

This is a small set, it has a number of fixes and a couple of minor
cleanups to go in for the hard freeze.

# gpg: Signature made Tue 19 Mar 2019 10:05:48 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190319:
spapr: Remove NULL checks on error_propagate() calls
ppc/xics/spapr: Fix H_IPOLL implementation
ppc/pnv: Fix variable size in pnv_psi_power9_irq_set()
ppc/pnv: Use local_err variable in pnv_chip_power9_intc_create()
MAINTAINERS: PPC: add a PowerNV machine entry
ppc/pnv: update skiboot to commit 261ca8e779e5.
spapr: Correctly set LPCR[GTSE] in H_REGISTER_PROCESS_TABLE

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Correctly set LPCR[GTSE] in H_REGISTER_PROCESS_TABLE

176dccee "target/ppc/spapr: Clear partition table entry when allocating
hash table" reworked the H_REGISTER_PROCESS_TABLE hypercall, but
u

spapr: Correctly set LPCR[GTSE] in H_REGISTER_PROCESS_TABLE

176dccee "target/ppc/spapr: Clear partition table entry when allocating
hash table" reworked the H_REGISTER_PROCESS_TABLE hypercall, but
unfortunately due to a small error no longer correctly sets the LPCR[GTSE]
bit which allows the guest to directly execute (some types of) tlbie (TLB
flush) instructions without involving the hypervisor.

We got away with this, initially, because POWER9 did not have hypervisor
mode enabled in its msr_mask, which meant we didn't actually run hypervisor
privilege checks in TCG at all. However, da874d90 "target/ppc: add HV
support for POWER9" turned on HV support on POWER9 for the benefit of the
powernv machine type.

This exposed the earlier bug in H_REGISTER_PROCESS_TABLE, and causes guests
which rely on LPCR[GTSE] (i.e. basically all of them) to crash during early
boot when their first tlbie instruction causes an unexpected trap.

Fixes: 176dccee target/ppc/spapr: Clear partition table entry when allocating hash table
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Cleber Rosa <crosa@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190312' into staging

ppc patch queue for 2019-03-10

This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bun

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190312' into staging

ppc patch queue for 2019-03-10

This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bunch of minor style problems
* Suppressed warnings about Spectre/Meltdown mitigations with TCG
* Added one more patch, a preliminary fix towards the not-quite-ready
support for NVLink VFIO passthrough.

This is a final pull request before the 4.0 soft freeze. Changes
include:
* A Great Renaming to use camel case properly in spapr code
* Optimization of some vector instructions
* Support for POWER9 cpus in the powernv machine
* Fixes a regression from the last pull request in handling VSX
instructions with mixed operands from the FPR and VMX parts of the
register array
* Optimization hack to avoid scanning all the (empty) entries on a
new IOMMU window
* Add FSL I2C controller model for E500
* Support for KVM acceleration of the H_PAGE_INIT hypercall on spapr
* Update u-boot image for E500
* Enable Specre/Meltdown mitigations by default on the new machine type
* Enable large decrementer support for POWER9

# gpg: Signature made Tue 12 Mar 2019 08:14:51 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190312: (62 commits)
vfio: Make vfio_get_region_info_cap public
Suppress test warnings about missing Spectre/Meltdown mitigations with TCG
spapr: Use CamelCase properly
target/ppc: Optimize x[sv]xsigdp using deposit_i64()
target/ppc: Optimize xviexpdp() using deposit_i64()
target/ppc: add HV support for POWER9
ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9
ppc/pnv: add more dummy XSCOM addresses
ppc/pnv: activate XSCOM tests for POWER9
ppc/pnv: POWER9 XSCOM quad support
ppc/pnv: extend XSCOM core support for POWER9
ppc/pnv: add a OCC model for POWER9
ppc/pnv: add a OCC model class
ppc/pnv: add SerIRQ routing registers
ppc/pnv: add a LPC Controller model for POWER9
ppc/pnv: add a 'dt_isa_nodename' to the chip
ppc/pnv: add a LPC Controller class model
ppc/pnv: lpc: fix OPB address ranges
ppc/pnv: add a PSI bridge model for POWER9
ppc/pnv: add a PSI bridge class model
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Use CamelCase properly

The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of. There are quite a lot of
places where we bend

spapr: Use CamelCase properly

The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of. There are quite a lot of
places where we bend the rules in order to preserve the capitalization of
internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR".

That was a bad idea - it frequently leads to names ending up with hard to
read clusters of capital letters, and means they don't catch the eye as
type identifiers, which is kind of the point of the CamelCase convention in
the first place.

In short, keeping type identifiers look like CamelCase is more important
than preserving standard capitalization of internal "words". So, this
patch renames a heap of spapr internal type names to a more standard
CamelCase.

In addition to case changes, we also make some other identifier renames:
VIOsPAPR* -> SpaprVio*
The reverse word ordering was only ever used to mitigate the capital
cluster, so revert to the natural ordering.
VIOsPAPRVTYDevice -> SpaprVioVty
VIOsPAPRVLANDevice -> SpaprVioVlan
Brevity, since the "Device" didn't add useful information
sPAPRDRConnector -> SpaprDrc
sPAPRDRConnectorClass -> SpaprDrcClass
Brevity, and makes it clearer this is the same thing as a "DRC"
mentioned in many other places in the code

This is 100% a mechanical search-and-replace patch. It will, however,
conflict with essentially any and all outstanding patches touching the
spapr code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc/spapr: Clear partition table entry when allocating hash table

If we allocate a hash page table then we know that the guest won't be
using process tables, so set the partition table entry

target/ppc/spapr: Clear partition table entry when allocating hash table

If we allocate a hash page table then we know that the guest won't be
using process tables, so set the partition table entry maintained for
the guest to zero. If this isn't done, then the guest radix bit will
remain set in the entry. This means that when the guest calls
H_REGISTER_PROCESS_TABLE there will be a mismatch between then flags
and the value in spapr->patb_entry, and the call will fail. The guest
will then panic:

Failed to register process table (rc=-4)
kernel BUG at arch/powerpc/platforms/pseries/lpar.c:959

The result being that it isn't possible to boot a hash guest on a P9
system.

Also fix a bug in the flags parsing in h_register_process_table() which
was introduced by the same patch, and simplify the handling to make it
less likely that errors will be introduced in the future. The effect
would have been setting the host radix bit LPCR_HR for a hash guest
using process tables, which currently isn't supported and so couldn't
have been triggered.

Fixes: 00fd075e18 "target/ppc/spapr: Set LPCR:HR when using Radix mode"

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190305022102.17610-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc/spapr: Add SPAPR_CAP_CCF_ASSIST

Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate
the requirement for a hw-assisted version of the count cache flush
workaround.

The c

target/ppc/spapr: Add SPAPR_CAP_CCF_ASSIST

Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate
the requirement for a hw-assisted version of the count cache flush
workaround.

The count cache flush workaround is a software workaround which can be
used to flush the count cache on context switch. Some revisions of
hardware may have a hardware accelerated flush, in which case the
software flush can be shortened. This cap is used to set the
availability of such hardware acceleration for the count cache flush
routine.

The availability of such hardware acceleration is indicated by the
H_CPU_CHAR_BCCTR_FLUSH_ASSIST flag being set in the characteristics
returned from the KVM_PPC_GET_CPU_CHAR ioctl.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190301031912.28809-2-sjitindarsingh@gmail.com>
[dwg: Small style fixes]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc/spapr: Add workaround option to SPAPR_CAP_IBS

The spapr_cap SPAPR_CAP_IBS is used to indicate the level of capability
for mitigations for indirect branch speculation. Currently the availa

target/ppc/spapr: Add workaround option to SPAPR_CAP_IBS

The spapr_cap SPAPR_CAP_IBS is used to indicate the level of capability
for mitigations for indirect branch speculation. Currently the available
values are broken (default), fixed-ibs (fixed by serialising indirect
branches) and fixed-ccd (fixed by diabling the count cache).

Introduce a new value for this capability denoted workaround, meaning that
software can work around the issue by flushing the count cache on
context switch. This option is available if the hypervisor sets the
H_CPU_BEHAV_FLUSH_COUNT_CACHE flag in the cpu behaviours returned from
the KVM_PPC_GET_CPU_CHAR ioctl.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190301031912.28809-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190226' into staging

ppc patch queue 2019-02-26

Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190226' into staging

ppc patch queue 2019-02-26

Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP light" states on POWER9
* Add support for HVI interrupts on POWER9 (powernv machine)
* CVE-2019-8934: Don't leak host model and serial information to the guest
* Tests and cleanups for various hot unplug options
* Hash and radix MMU implementation on POWER9 for powernv machine
* PCI Host Bridge hotplug support for pseries machine
* Allow larger kernels and initrds for powernv machine

Plus a handful of miscellaneous fixes and cleanups.

The cpu hotplug tests and cleanups from David Hildenbrand aren't
solely power related. However the consensus amongst Michael Tsirkin,
David Hildenbrand, Cornelia Huck and myself was that it made most
sense to come in via my tree.

# gpg: Signature made Tue 26 Feb 2019 03:37:46 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190226: (50 commits)
ppc/pnv: use IEC binary prefixes to represent sizes
ppc/pnv: add INITRD_MAX_SIZE constant
ppc/pnv: increase kernel size limit to 256MiB
hw/ppc: Use object_initialize_child for correct reference counting
ppc/xive: xive does not have a POWER7 interrupt model
tests/device-plug: Add PHB unplug request test for spapr
spapr: enable PHB hotplug for default pseries machine type
spapr: add hotplug hooks for PHB hotplug
spapr_pci: add ibm, my-drc-index property for PHB hotplug
spapr_pci: provide node start offset via spapr_populate_pci_dt()
spapr_events: add support for phb hotplug events
spapr: populate PHB DRC entries for root DT node
spapr: create DR connectors for PHBs
spapr_pci: add PHB unrealize
spapr_irq: Expose the phandle of the interrupt controller
spapr: Expose the name of the interrupt controller node
xics: Write source state to KVM at claim time
spapr/drc: Drop spapr_drc_attach() fdt argument
spapr/pci: Generate FDT fragment at configure connector time
spapr: Generate FDT fragment for CPUs at configure connector time
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/ppc: Rename PATB/PATBE -> PATE

That "b" means "base address" and thus shouldn't be in the name
of actual entries and related constants.

This patch keeps the synthetic patb_entry field of the

target/ppc: Rename PATB/PATBE -> PATE

That "b" means "base address" and thus shouldn't be in the name
of actual entries and related constants.

This patch keeps the synthetic patb_entry field of the spapr
virtual hypervisor unchanged until I figure out if that has
an impact on the migration stream.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190215170029.15641-11-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc/spapr: Set LPCR:HR when using Radix mode

The HW relies on LPCR:HR along with the PATE to determine whether
to use Radix or Hash mode. In fact it uses LPCR:HR more commonly
than the PATE.

target/ppc/spapr: Set LPCR:HR when using Radix mode

The HW relies on LPCR:HR along with the PATE to determine whether
to use Radix or Hash mode. In fact it uses LPCR:HR more commonly
than the PATE.

For us, it's also more efficient to do so, especially since unlike
the HW we do not maintain a cache of the current PATE and HV PATE
in a generic place.

Prepare the grounds for that by ensuring that LPCR:HR is set
properly on SPAPR machines.

Another option would have been to use a callback to get the PATE
but this gets messy when implementing bare metal support, it's
much simpler (and faster) to use LPCR.

Since existing migration streams may not have it, fix it up in
spapr_post_load() as well based on the pseudo-PATE entry that
we keep.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190215170029.15641-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190109' into staging

ppc patch queue 2019-01-09

Second main pull request for qemu-4.0. Highlights are:
* Final parts of XIVE suppo

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190109' into staging

ppc patch queue 2019-01-09

Second main pull request for qemu-4.0. Highlights are:
* Final parts of XIVE support for pseries (without KVM)
* Preliminary work for PHB hotplug
* Starting to use TCG vector operations

This includes some changes in the PCI core, which Michael Tsirkin
requested come through this tree, since they're primarily of interest
for ppc.

# gpg: Signature made Tue 08 Jan 2019 22:44:10 GMT
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190109: (29 commits)
spapr: enable XIVE MMIOs at reset
spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS
ppc/xics: allow ICSState to have an offset 0
spapr: move the qemu_irq array under the machine
pnv/psi: move the ICSState qemu_irq array under the PSI device model
ppc: export the XICS and XIVE set_irq handlers
spapr: return from post_load method when RTC import fails
ppc: replace the 'Object *intc' by a 'ICPState *icp' pointer under the CPU
ppc/xive: introduce a XiveTCTX pointer under PowerPCCPU
spapr: modify the prototype of the cpu_intc_create() method
spapr/xive: simplify the sPAPR IRQ qirq method for XIVE
spapr_pci: Define SPAPR_MAX_PHBS in hw/pci-host/spapr.h
pci: allow cleanup/unregistration of PCI root buses
spapr: move spapr_create_phb() to core machine code
MAINTAINERS: add qemu_vga.ndrv file entry for Mac machines
MAINTAINERS: Add some missing ppc-related files
target/ppc: replace AVR* macros with Vsr* macros
target/ppc: move FP and VMX registers into aligned vsr register array
target/ppc: merge ppc_vsr_t and ppc_avr_t union types
target/ppc: switch FPR, VMX and VSX helpers to access data directly from cpu_env
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS

The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both mod

spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS

The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both modes
are not supported at the same time.

The machine starts with the legacy mode and a new interrupt mode can
then be negotiated by the CAS process. In this case, the new mode is
activated after a reset to take into account the required changes in
the machine. These impact the device tree layout, the interrupt
presenter object and the exposed MMIO regions in the case of XIVE.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

ppc/spapr: Receive and store device tree blob from SLOF

SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
m

ppc/spapr: Receive and store device tree blob from SLOF

SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS (QEMU implements it), it makes
sense to pass the SLOF final device tree to QEMU to let it implement
RTAS related tasks better, such as PCI host bus adapter hotplug.

Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).

This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.

This adds an @update_dt_enabled machine property to allow backward
migration.

SLOF already has a hypercall since
https://github.com/aik/SLOF/commit/e6fc84652c9c0073f9183

This makes use of the new fdt_check_full() helper. In order to allow
the configure script to pick the correct DTC version, this adjusts
the DTC presense test.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: Add H-Call H_HOME_NODE_ASSOCIATIVITY

H_HOME_NODE_ASSOCIATIVITY H-Call returns the associativity domain
designation associated with the identifier input parameter

This fixes a crash when we t

spapr: Add H-Call H_HOME_NODE_ASSOCIATIVITY

H_HOME_NODE_ASSOCIATIVITY H-Call returns the associativity domain
designation associated with the identifier input parameter

This fixes a crash when we try to hotplug a CPU in memory-less and
CPU-less numa node. In this case, the kernel tries to online the
node, but without the information provided by this h-call, the node id,
it cannot and the CPU is started while the node is not onlined.

It also removes the warning message from the kernel:
VPHN is not supported. Disabling polling..

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180618' into staging

ppc patch queue 2018-06-18

Next batch of ppc and spapr related patches for the 3.0 release.
* Improved hand

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180618' into staging

ppc patch queue 2018-06-18

Next batch of ppc and spapr related patches for the 3.0 release.
* Improved handling of Spectre/Meltdown mitigations for POWER8
* Numerous Mac machine type cleanups and improvements
* Cleanup to cpu realize/unrealize path for spapr
* Create a place for machine-specific per-cpu information, and
start moving some things to it
* Assorted bugfixes

# gpg: Signature made Mon 18 Jun 2018 04:52:37 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180618: (28 commits)
spapr: fix xics_system_init() error path
target/ppc, spapr: Move VPA information to machine_data
ppc/pnv: introduce a pnv_chip_core_realize() routine
spapr_cpu_core: introduce spapr_create_vcpu()
spapr_cpu_core: add missing rollback on realization path
spapr_cpu_core: fix potential leak in spapr_cpu_core_realize()
spapr_cpu_core: convert last snprintf() to g_strdup_printf()
pnv: Add cpu unrealize path
pnv: Clean up cpu realize path
pnv_core: Allocate cpu thread objects individually
pnv: Fix some error handling cpu realize()
spapr: Clean up cpu realize/unrealize paths
sm501: Do not clear read only bits when writing registers
mos6522: expose mos6522_update_irq() through MOS6522DeviceClass
mos6522: remove additional interrupt flag filter from mos6522_update_irq()
mos6522: only clear the shift register interrupt upon write
xics_kvm: fix a build break
mac_newworld: add PMU device
adb: add property to disable direct reg 3 writes
adb: fix read reg 3 byte ordering
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/ppc, spapr: Move VPA information to machine_data

CPUPPCState currently contains a number of fields containing the state of
the VPA. The VPA is a PAPR specific concept covering several guest/

target/ppc, spapr: Move VPA information to machine_data

CPUPPCState currently contains a number of fields containing the state of
the VPA. The VPA is a PAPR specific concept covering several guest/host
shared memory areas used to communicate some information with the
hypervisor.

As a PAPR concept this is really machine specific information, although it
is per-cpu, so it doesn't really belong in the core CPU state structure.

There's also other information that's per-cpu, but platform/machine
specific. So create a (void *)machine_data in PowerPCCPU which can be
used by the machine to locate per-cpu data. Intialization, lifetime and
cleanup of machine_data is entirely up to the machine type.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>

show more ...

spapr: fix leak in h_client_architecture_support()

If the negotiated compat mode can't be set, but raw mode is supported,
we decide to ignore the error. An so, we should free it to prevent a
memory

spapr: fix leak in h_client_architecture_support()

If the negotiated compat mode can't be set, but raw mode is supported,
we decide to ignore the error. An so, we should free it to prevent a
memory leak.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2018-05-07

* pc-dimm: factor out MemoryDevice
(virtio-pmem and virtio-mem will make use

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2018-05-07

* pc-dimm: factor out MemoryDevice
(virtio-pmem and virtio-mem will make use of the new abstraction later)
* scripts/device-crash-test: Removed fixed CAN entries

# gpg: Signature made Mon 07 May 2018 18:01:42 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
scripts/device-crash-test: Removed fixed CAN entries
vl: allow 'maxmem' without 'slot'
spapr: rename "hotplug memory" terminology to "device memory"
pc: rename "hotplug memory" terminology to "device memory"
machine: rename MemoryHotplugState to DeviceMemoryState
pc-dimm: move actual plug/unplug of a memory region to MemoryDevice
pc-dimm: factor out capacity and slot checks into MemoryDevice
pc-dimm: factor out address search into MemoryDevice code
pc-dimm: pass in the machine and to the MemoryHotplugState
pc-dimm: no need to pass the memory region
machine: make MemoryHotplugState accessible via the machine
pc-dimm: factor out MemoryDevice interface

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

machine: rename MemoryHotplugState to DeviceMemoryState

Rename it to better match the new terminology.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-9-david@

machine: rename MemoryHotplugState to DeviceMemoryState

Rename it to better match the new terminology.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

machine: make MemoryHotplugState accessible via the machine

Let's allow to query the MemoryHotplugState directly from the machine.
If the pointer is NULL, the machine does not support memory devices

machine: make MemoryHotplugState accessible via the machine

Let's allow to query the MemoryHotplugState directly from the machine.
If the pointer is NULL, the machine does not support memory devices. If
the pointer is !NULL, the machine supports memory devices and the
data structure contains information about the applicable physical
guest address space region.

This allows us to generically detect if a certain machine has support
for memory devices, and to generically manage it (find free address
range, plug/unplug a memory region).

We will rename "MemoryHotplugState" to something more meaningful
("DeviceMemory") after we completed factoring out the pc-dimm code into
MemoryDevice code.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
[ehabkost: squashed fix to use g_malloc0()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

pc-dimm: factor out MemoryDevice interface

On the qmp level, we already have the concept of memory devices:
"query-memory-devices"
Right now, we only support NVDIMM and PCDIMM.

We want to map o

pc-dimm: factor out MemoryDevice interface

On the qmp level, we already have the concept of memory devices:
"query-memory-devices"
Right now, we only support NVDIMM and PCDIMM.

We want to map other devices later into the address space of the guest.
Such device could e.g. be virtio devices. These devices will have a
guest memory range assigned but won't be exposed via e.g. ACPI. We want
to make them look like memory device, but not glued to pc-dimm.

Especially, it will not always be possible to have TYPE_PC_DIMM as a parent
class (e.g. virtio devices). Let's use an interface instead. As a first
part, convert handling of
- qmp_pc_dimm_device_list
- get_plugged_memory_size
to our new model. plug/unplug stuff etc. will follow later.

A memory device will have to provide the following functions:
- get_addr(): Necessary, as the property "addr" can e.g. not be used for
virtio devices (already defined).
- get_plugged_size(): The amount this device offers to the guest as of
now.
- get_region_size(): Because this can later on be bigger than the
plugged size.
- fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.13-20180504' into staging

ppc patch queue 2018-05-04

Second patch of patches for qemu-2.13 (or whatever the version ends up
being called

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.13-20180504' into staging

ppc patch queue 2018-05-04

Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes

# gpg: Signature made Fri 04 May 2018 06:07:43 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.13-20180504:
spapr: don't advertise radix GTSE if max-compat-cpu < power9
spapr: don't migrate "spapr_option_vector_ov5_cas" to pre 2.8 machines
target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
mac_newworld: move wiring of macio IRQs to macio_newworld_realize()
mac_newworld: remove pics IRQ array and wire up macio to OpenPIC directly
uninorth: create new uninorth device
spapr: Clean up handling of LPCR power-saving exit bits
spapr: Move PAPR mode cpu setup fully to spapr code
target/ppc: Delay initialization of LPCR_UPRT for secondary cpus
spapr: Clean up LPCR updates from hypercalls
spapr: Make a helper to set up cpu entry point state
spapr: Remove unhelpful helpers from rtas_start_cpu()
spapr: Clean up rtas_start_cpu() & rtas_stop_self()
target/ppc: Add ppc_store_lpcr() helper
spapr: Remove support for explicitly allocated RMAs
target/ppc: add basic support for PTCR on POWER9
target/ppc: return a nil HPT base address on sPAPR machines

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Clean up LPCR updates from hypercalls

There are several places in spapr_hcall.c where we need to update the LPCR
value on all CPUs. We do this with the set_spr() helper. That's not
really c

spapr: Clean up LPCR updates from hypercalls

There are several places in spapr_hcall.c where we need to update the LPCR
value on all CPUs. We do this with the set_spr() helper. That's not
really correct because this directly sets the SPR value, without going
through the ppc_store_lpcr() helper which may need to update state based
on the LPCR change.

In fact, set_spr() is only ever used for the LPCR, so replace it with an
explicit LPCR updated which uses the right low-level helper. While we're
there, move the CPU_FOREACH() which was in every one of the callers into
the new helper: set_all_lpcrs().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180306' into staging

ppc patch queue 2018-03-06

This pull request supersedes ppc-for-2.12-20180302 which had compile
problems with

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180306' into staging

ppc patch queue 2018-03-06

This pull request supersedes ppc-for-2.12-20180302 which had compile
problems with some gcc versions. It also contains a few additional
patches.

Highlights are:
* New Sam460ex machine type
* Yet more fixes related to vcpu id allocation for spapr
* Numerous macio cleanupsr
* Some enhancements to the Spectre/Meltdown fixes for pseries,
allowing use of a better mitigation for indirect branch based
exploits
* New pseries machine types with Spectre/Meltdown mitigations
enabled (stop gap until libvirt and management understands the
machine options)
* A handful of other fixes

# gpg: Signature made Tue 06 Mar 2018 04:01:00 GMT
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180306: (30 commits)
PowerPC: Add TS bits into msr_mask
adb: add trace-events for monitoring keyboard/mouse during bus enumeration
PPC: e500: Fix duplicate kernel load and device tree overlap
hw/ppc/spapr,e500: Use new property "stdout-path" for boot console
ppc/spapr-caps: Define the pseries-2.12-sxxm machine type
ppc/spapr-caps: Convert cap-ibs to custom spapr-cap
ppc/spapr-caps: Convert cap-sbbc to custom spapr-cap
ppc/spapr-caps: Convert cap-cfpc to custom spapr-cap
ppc/spapr-caps: Add support for custom spapr_capabilities
target/ppc: Check mask when setting cap_ppc_safe_indirect_branch
macio: remove macio_init() function
macio: move setting of CUDA timebase frequency to macio_common_realize()
mac_newworld: use object link to pass OpenPIC object to macio
openpic: move OpenPIC state and related definitions to openpic.h
openpic: move KVM-specific declarations into separate openpic_kvm.h file
mac_oldworld: use object link to pass heathrow PIC object to macio
macio: move macio related structures and defines into separate macio.h file
heathrow: change heathrow_pic_init() to return the heathrow device
heathrow: convert to trace-events
heathrow: QOMify heathrow PIC
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...