Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and

Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:

- IIO driver updates, loads of new ones and evolution of existing ones

- coresight driver updates

- const cleanups for many driver subsystems

- speakup driver additions

- platform remove callback void cleanups

- mei driver updates

- mhi driver updates

- cdx driver updates for MSI interrupt handling

- nvmem driver updates

- other smaller driver updates and cleanups, full details in the
shortlog

All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...

show more ...

Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.9

IIO Backe

Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.9

IIO Backend support
===================

New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.

New device support
==================

adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.

Features
========

tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.

Cleanup
=======
Various minor typo fixes and better use of defines etc.

Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.

Tools
- Use rewinddir() instead of seekdir() to return to start of file.

core
- Make iio_bus_type constant.

adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.

* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...

show more ...

tools: iio: replace seekdir() in iio_generic_buffer

Replace seekdir() with rewinddir() in order to fix a localized glibc bug.

One of the glibc patches that stable Gentoo is using causes an improper

tools: iio: replace seekdir() in iio_generic_buffer

Replace seekdir() with rewinddir() in order to fix a localized glibc bug.

One of the glibc patches that stable Gentoo is using causes an improper
directory stream positioning bug on 32bit arm. That in turn ends up as a
floating point exception in iio_generic_buffer.

The attached patch provides a fix by using an equivalent function which
should not cause trouble for other distros and is easier to reason about
in general as it obviously always goes back to to the start.

https://sourceware.org/bugzilla/show_bug.cgi?id=31212

Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20240108103224.3986-1-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver chan

Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.

Included in here are:

- New IIO drivers and features and improvments in that subsystem

- New hwtracing drivers and additions to that subsystem

- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.

- FPGA driver updates

- counter subsystem and driver updates

- MHI driver updates

- nvmem driver updates

- documentation updates

- Other smaller driver updates and fixes, full details in the
shortlog

All of these have been in linux-next for a while with no reported
problems"

* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.3 cycle

Merge tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.3 cycle

The usual mixed bag. So far this has been a quiet cycle for IIO.

New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.

Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.

Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.

* tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (71 commits)
iio: adc: ad7291: Fix indentation error by adding extra spaces
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
iio: imu: fix spdx format
iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
dt-bindings: iio: cleanup examples - indentation
dt-bindings: iio: use lowercase hex in examples
dt-bindings: iio: correct node names in examples
dt-bindings: iio: minor whitespace cleanups
dt-bindings: iio: drop unneeded quotes
dt-bindings: iio: adc: Add NXP IMX93 ADC
iio: adc: add imx93 adc support
dt-bindings: iio: adc: add Texas Instruments ADS7924
iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
iio: light: vcnl4000: Add interrupt support for vcnl4040
iio: light: vcnl4000: Make irq handling more generic
iio: light: vcnl4000: Prepare for more generic setup
...

show more ...

tools/iio/iio_utils:fix memory leak

1. fopen sysfs without fclose.
2. asprintf filename without free.
3. if asprintf return error,do not need to free the buffer.

Signed-off-by: Yulong Zhang <yulong

tools/iio/iio_utils:fix memory leak

1. fopen sysfs without fclose.
2. asprintf filename without free.
3. if asprintf return error,do not need to free the buffer.

Signed-off-by: Yulong Zhang <yulong.zhang@metoak.net>
Link: https://lore.kernel.org/r/20230117025147.69890-1-yulong.zhang@metoak.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge branch 'for-next' into for-linus

Merge branch 'main' into zstd-linus

Merge branch 'for-6.2/default-remove-cleanup' into for-linus

- removal of superfluous hid_hw_stop() calls for drivers with default
.remove callback (Marcus Folkesson)

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:

- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588

There's more cross tree updates than usual, though all fairly minor:

- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.

Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.

show more ...

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

show more ...

Merge tag 'v6.1-rc4' into spi-6.2

Linux 6.1-rc4 which should get my CI working on RPi3s again.