Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing

Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing

When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.

All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.

The VFS folks have to also maintain debugfs_create_automount() for
this single user.

It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.

A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.

When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:

pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");

This gives users another 5 years to fix their scripts.

- Use queue_rcu_work() instead of call_rcu() for freeing event filters

The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.

- Remove pointless memory barriers in latency code

Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.

- Remove "__attribute__()" from the type field of event format

When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:

field:const char * filename; offset:24; size:8; signed:0;

Turns into:

field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;

This confuses parsers. Add code to strip these tags from the strings.

- Add eprobe config option CONFIG_EPROBE_EVENTS

Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.

It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.

- Add eprobe documentation

When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.

- Replace open coded cpumask_next_wrap() in move_to_next_cpu()

- Have preemptirq_delay_run() use off-stack CPU mask

- Remove obsolete comment about pelt_cfs event

DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.

- Remove EVENT_FILE_FL_SOFT_MODE flag

The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.

- Fix typo in comment

* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()

show more ...

tracing: Remove "__attribute__()" from the type field of event format

With CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, `__user` is
converted to `__attribute__((btf_type_tag("user")))`. In this

tracing: Remove "__attribute__()" from the type field of event format

With CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, `__user` is
converted to `__attribute__((btf_type_tag("user")))`. In this case,
some syscall events have it for __user data, like below;

/sys/kernel/tracing # cat events/syscalls/sys_enter_openat/format
name: sys_enter_openat
ID: 720
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;

field:int __syscall_nr; offset:8; size:4; signed:1;
field:int dfd; offset:16; size:8; signed:0;
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
field:int flags; offset:32; size:8; signed:0;
field:umode_t mode; offset:40; size:8; signed:0;

Then the trace event filter fails to set the string acceptable flag
(FILTER_PTR_STRING) to the field and rejects setting string filter;

# echo 'filename.ustring ~ "*ftracetest-dir.wbx24v*"' \
>> events/syscalls/sys_enter_openat/filter
sh: write error: Invalid argument
# cat error_log
[ 723.743637] event filter parse error: error: Expecting numeric field
Command: filename.ustring ~ "*ftracetest-dir.wbx24v*"

Since this __attribute__ makes format parsing complicated and not
needed, remove the __attribute__(.*) from the type string.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/175376583493.1688759.12333973498014733551.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'i2c-host-6.17-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host for v6.17, part 1

Cleanups and refactorings:
- lpi2c, riic, st, stm

Merge tag 'i2c-host-6.17-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host for v6.17, part 1

Cleanups and refactorings:
- lpi2c, riic, st, stm32f7: general improvements
- riic: support more flexible IRQ configurations
- tegra: fix documentation

Improvements:
- lpi2c: improve register polling and add atomic transfer
- imx: use guarded spinlocks

New hardware support:
- Samsung Exynos 2200
- Renesas RZ/T2H (R9A09G077), RZ/N2H (R9A09G087)

DT binding:
- rk3x: enable power domains
- nxp: support clock property

show more ...

Merge tag 'v6.16' into x86/cpu, to resolve conflict

Resolve overlapping context conflict between this upstream fix:

d8010d4ba43e ("x86/bugs: Add a Transient Scheduler Attacks mitigation")

And th

Merge tag 'v6.16' into x86/cpu, to resolve conflict

Resolve overlapping context conflict between this upstream fix:

d8010d4ba43e ("x86/bugs: Add a Transient Scheduler Attacks mitigation")

And this pending commit in tip:x86/cpu:

65f55a301766 ("x86/CPU/AMD: Add CPUID faulting support")

Conflicts:
arch/x86/kernel/cpu/amd.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.16-rc8).

Conflicts:

drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddd

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.16-rc8).

Conflicts:

drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au

Adjacent changes:

drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tracing: Fix comment in trace_module_remove_events()

Fix typo "allocade" -> "allocated".

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: http

tracing: Fix comment in trace_module_remove_events()

Fix typo "allocade" -> "allocated".

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250710095628.42ed6b06@batman.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

tracing: Remove EVENT_FILE_FL_SOFT_MODE flag

When soft disabling of trace events was first created, it needed to have a
way to know if a file had a user that was using it with soft disabled (for
tri

tracing: Remove EVENT_FILE_FL_SOFT_MODE flag

When soft disabling of trace events was first created, it needed to have a
way to know if a file had a user that was using it with soft disabled (for
triggers that need to enable or disable events from a context that can not
really enable or disable the event, it would set SOFT_DISABLED to state it
is disabled). The flag SOFT_MODE was used to denote that an event had a
user that would enable or disable it via the SOFT_DISABLED flag.

Commit 1cf4c0732db3c ("tracing: Modify soft-mode only if there's no other
referrer") fixed a bug where if two users were using the SOFT_DISABLED
flag the accounting would get messed up as the SOFT_MODE flag could only
handle one user. That commit added the sm_ref counter which kept track of
how many users were using the event in "soft mode". This made the
SOFT_MODE flag redundant as it should only be set if the sm_ref counter is
non zero.

Remove the SOFT_MODE flag and just use the sm_ref counter to know the
event is in soft mode or not. This makes the code a bit simpler.

Link: https://lore.kernel.org/all/20250702111908.03759998@batman.local.home/

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Link: https://lore.kernel.org/20250702143657.18dd1882@batman.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.16-rc7' into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spidev: introduce trivial abb sensor device

Merge series from Heiko Schocher <hs@denx.de>:

This series introduces the changes needed for trivial spi
based sensors from ABB, currently operated from

spidev: introduce trivial abb sensor device

Merge series from Heiko Schocher <hs@denx.de>:

This series introduces the changes needed for trivial spi
based sensors from ABB, currently operated from userspace.

show more ...

Merge tag 'v6.16-rc7' into usb-next

We need the USB/Thunderbolt fixes in here for other patches to be on top
of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix timerlat with use of FORTIFY_SOURCE

FORTIFY_SOURCE

Merge tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix timerlat with use of FORTIFY_SOURCE

FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.

timerlat has the following:

memcpy(&entry->caller, fstack->calls, size);
entry->size = size;

Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.

Swap the order to satisfy FORTIFY_SOURCE logic.

- Add down_write(trace_event_sem) when adding trace events in modules

Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.

Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.

* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()

show more ...

tracing: Add down_write(trace_event_sem) when adding trace event

When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to r

tracing: Add down_write(trace_event_sem) when adding trace event

When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.

If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.

The addition of the event should take the trace_event_sem for write while
it adds the new event.

Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764eb6 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

- Have module addresses get updated in the persistent ring buff

Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

- Have module addresses get updated in the persistent ring buffer

The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.

- Print function names for irqs off and preempt off callsites

When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.

- Clean ups of the histogram code

The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).

Also add some more comments to the code.

- Add "common_comm" field for histograms

Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.

- Show "subops" in the enabled_functions file

When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.

- Add "copy_trace_marker" option to instances

There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.

If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.

- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()

If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.

- Use __string() for task->comm in some sched events

Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.

- Have function graph "depth" be unsigned to the user

Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.

- Allow an arbitrary long CPU string to osnoise_cpus_write()

The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.

- Stop having ftrace check the per-cpu data "disabled" flag

The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.

- Use a new tracer_tracing_disable/enable() instead of data->disable
flag

There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.

Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.

- Save the trace clock in the persistent ring buffer

Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.

- Remove unused reference to a per CPU data pointer in mmiotrace
functions

- Remove unused buffer_page field from trace_array_cpu structure

- Remove more strncpy() instances

- Other minor clean ups and fixes

* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

tracing: Add a helper function to handle the dereference arg in verifier

Add a helper function called handle_dereference_arg() to replace the logic
that is identical in two locations of test_event_p

tracing: Add a helper function to handle the dereference arg in verifier

Add a helper function called handle_dereference_arg() to replace the logic
that is identical in two locations of test_event_printk().

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250507191703.5dd8a61d@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

tracing: Just use this_cpu_read() to access ignore_pid

The ignore_pid boolean on the per CPU data descriptor is updated at
sched_switch when a new task is scheduled in. If the new task is to be
igno

tracing: Just use this_cpu_read() to access ignore_pid

The ignore_pid boolean on the per CPU data descriptor is updated at
sched_switch when a new task is scheduled in. If the new task is to be
ignored, it is set to true, otherwise it is set to false. The current task
should always have the correct value as it is updated when the task is
scheduled in.

Instead of breaking up the read of this value, which requires preemption
to be disabled, just use this_cpu_read() which gives a snapshot of the
value. Since the value will always be correct for a given task (because
it's updated at sched switch) it doesn't need preemption disabled.

This will also allow trace events to be called with preemption enabled.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.038958766@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...