Merge commit '6e64f4580381e32c06ee146ca807c555b8f73e24' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Merge tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat

Pull exfat updates from Namjae Jeon:

- Use generic_write_sync instead of vfs_fsync_range in exfat_f

Merge tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat

Pull exfat updates from Namjae Jeon:

- Use generic_write_sync instead of vfs_fsync_range in exfat_file_write_iter.
It will fix an issue where fdatasync would be set incorrectly.

- Fix potential infinite loop by the self-linked chain.

* tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add cluster chain loop check for dir
exfat: fdatasync flag should be same like generic_write_sync()

show more ...

exfat: add cluster chain loop check for dir

An infinite loop may occur if the following conditions occur due to
file system corruption.

(1) Condition for exfat_count_dir_entries() to loop infinitel

exfat: add cluster chain loop check for dir

An infinite loop may occur if the following conditions occur due to
file system corruption.

(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.

(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.

(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.

(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.

(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.

This commit adds checks to break the above infinite loop.

Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmerm

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.15-rc1

* A bunch of fixes:
- We were missing a secondary mmu

Merge tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.15-rc1

* A bunch of fixes:
- We were missing a secondary mmu notifier call when flushing the tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- Fix a bunch of issues in the misaligned probing handling

* Perf improvements:
- Introduce support for runtime constant improving perf of d_hash()
- Add support for huge pfnmaps to improve tlb utilization
- Use Zawrs to improve smp_cond_load8/16() used by the queued spinlocks

* Hwprobe additions:
- Add support for Zicntr and Zihpm
- Add support for Zaamo and Zalrsc
- Add support for bfloat16 extensiosn
- Add support for Zicbom (only enabling clean and flush, not inval for security reasons)

* Misc:
- Add a kernel parameter to bypass the misaligned speed probing since we can't rely on Zicclsm

* tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux: (1585 commits)
riscv: Add runtime constant support
riscv: Move nop definition to insn-def.h
Documentation/kernel-parameters: Add riscv unaligned speed parameters
riscv: Add parameter for skipping access speed tests
riscv: Fix set up of vector cpu hotplug callback
riscv: Fix set up of cpu hotplug callbacks
riscv: Change check_unaligned_access_speed_all_cpus to void
riscv: Fix check_unaligned_access_all_cpus
riscv: Fix riscv_online_cpu_vec
riscv: Annotate unaligned access init functions
KVM: riscv: selftests: Add Zaamo/Zalrsc extensions to get-reg-list test
RISC-V: KVM: Allow Zaamo/Zalrsc extensions for Guest/VM
riscv: hwprobe: export Zaamo and Zalrsc extensions
riscv: add parsing for Zaamo and Zalrsc extensions
dt-bindings: riscv: add Zaamo and Zalrsc ISA extension description
riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler
riscv: fgraph: Select HAVE_FUNCTION_GRAPH_TRACER depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS
riscv: Fix missing __free_pages() in check_vector_unaligned_access()
riscv: Fix the __riscv_copy_vec_words_unaligned implementation
riscv: mm: Don't use %pK through printk
...

show more ...

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detecte

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.

Example use cases are "wake from suspend on approach" or to "lock
when leaving".

This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.

Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.

show more ...

Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.15

Refactoring and cleanups
- octeon, cadence, i801, pa

Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.15

Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support

Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable

New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy

New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562

Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure

show more ...

Merge branch 'linus' into x86/urgent, to pick up fixes and refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from

Merge tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:

- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places

- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely

- Drop an unnecessary call to fh_update() from nfsd_create_locked()

- Change i_op->mkdir() to return a struct dentry

Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.

- Repack DENTRY_* and LOOKUP_* flags"

* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.

show more ...

Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.15

This is a very big release due to a combination of some big new work,
m

Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.15

This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.

- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,

Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.

show more ...

ASoC: wm8904: Add DMIC and DRC support

Merge series from Francesco Dolcini <francesco@dolcini.it>:

This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to sim

ASoC: wm8904: Add DMIC and DRC support

Merge series from Francesco Dolcini <francesco@dolcini.it>:

This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.

DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.

The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.

The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.

If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.

Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.

This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in the xe shrinker from drm-next.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'v6.14-rc7' into x86/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

spi: Merge up fixes

They are a dependency for applying some changes to the MAINTAINERS
file.

Merge net-next/main to resolve conflicts

There are a few conflicts between the work that went
into wireless and that's here now, resolve them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.14-rc7

Merge tag 'i2c-host-fixes-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.14-rc7

- omap: fixed irq ACKS to avoid irq storming

Merge tag 'i2c-host-fixes-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.14-rc7

- omap: fixed irq ACKS to avoid irq storming and system hang.
- ali1535, ali15x3, sis630: fixed error path at probe exit.

show more ...