Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Standardize on the __ASSEMBLER__ macro that is provided by GCC and

Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers

- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()

- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed

- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data

- Print additional unrecoverable machine check information to make the
root cause analysis easier

- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined

- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens

- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal

- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this

- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation

- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel

- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual

- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely

- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing

* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...

show more ...

Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file

Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux

sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'

Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64

Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)

Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"

* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...

show more ...

s390/drivers: Remove unnecessary include <linux/export.h>

Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().

See commit 7d95680d64ac ("scripts/misc-check: check

s390/drivers: Remove unnecessary include <linux/export.h>

Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().

See commit 7d95680d64ac ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

sysfs: treewide: switch back to bin_attribute::read()/write()

The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.

S

sysfs: treewide: switch back to bin_attribute::read()/write()

The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Select config option KASAN_VMALLOC if KASAN is enabled

- Select co

Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Select config option KASAN_VMALLOC if KASAN is enabled

- Select config option VMAP_STACK unconditionally

- Implement arch_atomic_inc() / arch_atomic_dec() functions which
result in a single instruction if compiled for z196 or newer
architectures

- Make layering between atomic.h and atomic_ops.h consistent

- Comment s390 preempt_count implementation

- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation

- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.

- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.

- Optimize __preempt_count_dec_and_test()

- Remove __bootdata annotations from declarations in header files

- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code

- Fix suboptimal kernel image base when running make kasan.config

- Remove huge_pte_none() and huge_pte_none_mostly() as are identical to
the generic variants

- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC, and
REGION3_KERNEL_EXEC defines

- Simplify noexec page protection handling and change the page, segment
and region3 protection definitions automatically if the instruction
execution-protection facility is not available

- Save one instruction and prefer EXRL instruction over EX in string,
xor_*(), amode31 and other functions

- Create /dev/diag misc device to fetch diagnose specific information
from the kernel and provide it to userspace

- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl

- Make ccw_device_get_ciw() consistent and use array indices instead of
pointer arithmetic

- s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into
one place

- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code

- Add missing TLB range adjustment in pud_free_tlb()

- Improve topology setup by adding early polarization detection

- Fix length checks in codepage_convert() function

- The generic bitops implementation is nearly identical to the s390
one. Switch to the generic variant and decrease a bit the kernel
image size

- Provide an optimized arch_test_bit() implementation which makes use
of flag output constraint. This generates slightly better code

- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.

- Various other small improvements, fixes, and cleanups

Also, some changes came in through a merge of 'pci-device-recovery'
branch:

- Add PCI error recovery status mechanism

- Simplify and document debug_next_entry() logic

- Split private data allocation and freeing out of debug file open()
and close() operations

- Add debug_dump() function that gets a textual representation of a
debug info (e.g. PCI recovery hardware error logs)

- Add formatted content of pci_debug_msg_id to the PCI report

* tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/futex: Fix FUTEX_OP_ANDN implementation
s390/diag: Add memory topology information via diag310
s390/bitops: Provide optimized arch_test_bit()
s390/bitops: Switch to generic bitops
s390/ebcdic: Fix length decrement in codepage_convert()
s390/ebcdic: Fix length check in codepage_convert()
s390/ebcdic: Use exrl instead of ex
s390/amode31: Use exrl instead of ex
s390/stackleak: Use exrl instead of ex in __stackleak_poison()
s390/lib: Use exrl instead of ex in xor functions
s390/topology: Improve topology detection
s390/tlb: Add missing TLB range adjustment
s390/pkey: Constify 'struct bin_attribute'
s390/sclp: Constify 'struct bin_attribute'
s390/pci: Constify 'struct bin_attribute'
s390/ipl: Constify 'struct bin_attribute'
s390/crypto/cpacf: Constify 'struct bin_attribute'
s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
s390/cio: Use array indices instead of pointer arithmetic
s390/qdio: Rename feature flag aif_osa to aif_qdio
...

show more ...

s390/sclp: Constify 'struct bin_attribute'

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or mal

s390/sclp: Constify 'struct bin_attribute'

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Remove restrictions on PAI NNPA and crypto counters, enabling
concurr

Merge tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events

- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU
bring-up

- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching

- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during
failures, and adding timeout handling for Store Data requests to
address potential firmware issues

- Provide optimized __arch_hweight*() implementations

- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
topology updates, as they are unused and also not present on other
architectures

- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output
constraint

- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from
gaccess.c to a new header
- Pass the asce as parameter to sie64a()

- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and
swap" wrappers

- Add documentation for HWCAP flags

- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of
zero page size, when defer_init is enabled

- Refactor lowcore access and switch to using the get_lowcore()
function instead of the S390_lowcore macro

- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code

- Add missing MODULE_DESCRIPTION() macros

- Fix VM_FAULT_HWPOISON handling in do_exception()

* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
s390/kvm: Move bitfields for dat tables
s390/entry: Pass the asce as parameter to sie64a()
s390/sthyi: Use cached data when diag is busy
s390/sthyi: Move diag operations
s390/hypfs_diag: Diag204 busy loop
s390/diag: Add busy-indication-facility requirements
s390/diag: Diag204 add busy return errno
s390/diag: Return errno's from diag204
s390/sclp: Diag204 busy indication facility detection
s390/atomic_ops: Make use of flag output constraint
s390/atomic_ops: Improve __atomic_set() for small values
s390/atomic_ops: Use symbolic names
s390/smp: Switch to GENERIC_CPU_DEVICES
s390/hwcaps: Add documentation for HWCAP flags
s390/pgtable: Make crdte() and cspg() return a value
s390/topology: Remove CPU KOBJ_CHANGE uevents
s390/sclp: Add timeout to Store Data requests
s390/sclp: Prevent release of buffer in I/O
s390/sclp: Suppress unnecessary Store Data warning
...

show more ...