|
Revision tags: v6.18-rc3, v6.18-rc2, v6.18-rc1, v6.17, v6.17-rc7, v6.17-rc6, v6.17-rc5, v6.17-rc4, v6.17-rc3, v6.17-rc2, v6.17-rc1, v6.16, v6.16-rc7, v6.16-rc6, v6.16-rc5, v6.16-rc4, v6.16-rc3, v6.16-rc2, v6.16-rc1, v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2, v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4, v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1 |
|
| #
9187210e
|
| 13-Mar-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core & protocols:
- Large effort by Eric to lower rtnl_lo
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock critical sections.
- Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type".
Drivers:
- Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support
- Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva.
- CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx
- WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits) nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y nexthop: Fix out-of-bounds access during attribute validation nexthop: Only parse NHA_OP_FLAGS for dump messages that require it nexthop: Only parse NHA_OP_FLAGS for get messages that require it bpf: move sleepable flag from bpf_prog_aux to bpf_prog bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() selftests/bpf: Add kprobe multi triggering benchmarks ptp: Move from simple ida to xarray vxlan: Remove generic .ndo_get_stats64 vxlan: Do not alloc tstats manually devlink: Add comments to use netlink gen tool nfp: flower: handle acti_netdevs allocation failure net/packet: Add getsockopt support for PACKET_COPY_THRESH net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID selftests/bpf: Add bpf_arena_htab test. selftests/bpf: Add bpf_arena_list test. selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages bpf: Add helper macro bpf_addr_space_cast() libbpf: Recognize __arena global variables. bpftool: Recognize arena map type ...
show more ...
|
|
Revision tags: v6.8, v6.8-rc7, v6.8-rc6 |
|
| #
e199c4ba
|
| 21-Feb-2024 |
David S. Miller <davem@davemloft.net> |
Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
==================== wireless-next patches for v6.9
The second "new fe
Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
==================== wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
|
Revision tags: v6.8-rc5 |
|
| #
03c11eb3
|
| 14-Feb-2024 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch
Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h
Signed-off-by: Ingo Molnar <mingo@k
Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch
Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
|
Revision tags: v6.8-rc4 |
|
| #
87f5b5f2
|
| 06-Feb-2024 |
Johannes Berg <johannes.berg@intel.com> |
wifi: iwlwifi: mvm: remove flags for enable/disable beacon filter
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it.
Signed-off-by: Johann
wifi: iwlwifi: mvm: remove flags for enable/disable beacon filter
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
show more ...
|
|
Revision tags: v6.8-rc3, v6.8-rc2, v6.8-rc1 |
|
| #
0ea5c948
|
| 15-Jan-2024 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Backmerge to bring Xe driver to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Revision tags: v6.7, v6.7-rc8, v6.7-rc7 |
|
| #
ab1c2470
|
| 19-Dec-2023 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes that went thru perf-tools for v6.7 and to get in sync with upstream to check for drift in the copies of headers,
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes that went thru perf-tools for v6.7 and to get in sync with upstream to check for drift in the copies of headers, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
|
Revision tags: v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2 |
|
| #
3bf3e21c
|
| 15-Nov-2023 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-next into drm-misc-next
Let's kickstart the v6.8 release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
| #
5d2d4a9f
|
| 15-Nov-2023 |
Peter Zijlstra <peterz@infradead.org> |
Merge branch 'tip/perf/urgent'
Avoid conflicts, base on fixes.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Revision tags: v6.7-rc1 |
|
| #
cdd5b5a9
|
| 06-Nov-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.7 merge window.
|
| #
89ed67ef
|
| 31-Oct-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core & protocols:
- Support usec resolution of TCP timest
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send a cumulative ACK at the end. Increase single TCP flow performance on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler: - add built-in 3 band prio / WRR scheduling - support bypass if the qdisc is mostly idle (5% speed up for TCP RR) - improve inactive flow reporting - optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user space to request a single MDB entry instead of dumping the entire table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never be true but are hard for the verifier to infer. With some extra flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing per-cpu objects in maps. Access to those objects operates on the value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is for systemd to re-implement the LogNamespace feature which allows running multiple instances of systemd-journald to process the logs of different services.
- Enable open-coded task_vma iteration, after maple tree conversion made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and querying state of PLL circuits used for clock syntonization, in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code. Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs: - Intel (100G, ice, idpf): - add a driver for the Intel E2000 IPUs - make CRC/FCS stripping configurable - cross-timestamping for E823 devices - basic support for E830 devices - use aux-bus for managing client drivers - i40e: report firmware versions via devlink - nVidia/Mellanox: - support 4-port NICs - increase max number of channels to 256 - optimize / parallelize SF creation flow - Broadcom (bnxt): - enhance NIC temperature reporting - support PAM4 speeds and lane configuration - Marvell OcteonTX2: - PTP pulse-per-second output support - enable hardware timestamping for VFs - Solarflare/AMD: - conntrack NAT offload and offload for tunnels - Wangxun (ngbe/txgbe): - expose HW statistics - Pensando/AMD: - support PCI level reset - narrow down the condition under which skbs are linearized - Netronome/Corigine (nfp): - support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual: - Synopsys (stmmac): - add Loongson-1 SoC support - enable use of HW queues with no offload capabilities - enable PPS input support on all 5 channels - increase TX coalesce timer to 5ms - RealTek USB (r8152): improve efficiency of Rx by using GRO frags - xen: support SW packet timestamping - add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches: - avoid poor HW resource use on Spectrum-4 by better block selection for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches: - Microchip: - support configuring the drive strength for EMI compliance - ksz9477: partial ACL support - ksz9477: HSR offload - ksz9477: Wake on LAN - Realtek: - rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs: - support Broadcom BCM5221 PHYs - TI dp83867: support hardware LED blinking
- CAN: - add support for Linux-PHY based CAN transceivers - at91_can: clean up and use rx-offload helpers
- WiFi: - MediaTek (mt76): - new sub-driver for mt7925 USB/PCIe devices - HW wireless <> Ethernet bridging in MT7988 chips - mt7603/mt7628 stability improvements - Qualcomm (ath12k): - WCN7850: - enable 320 MHz channels in 6 GHz band - hardware rfkill support - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster - read board data variant name from SMBIOS - QCN9274: mesh support - RealTek (rtw89): - TDMA-based multi-channel concurrency (MCC) - Silicon Labs (wfx): - Remain-On-Channel (ROC) support
- Bluetooth: - ISO: many improvements for broadcast support - mark BCM4378/BCM4387 as BROKEN_LE_CODED - add support for QCA2066 - btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits) net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos() net: mana: Use xdp_set_features_flag instead of direct assignment vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size() iavf: delete the iavf client interface iavf: add a common function for undoing the interrupt scheme iavf: use unregister_netdev iavf: rely on netdev's own registered state iavf: fix the waiting time for initial reset iavf: in iavf_down, don't queue watchdog_task if comms failed iavf: simplify mutex_trylock+sleep loops iavf: fix comments about old bit locks doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name tools: ynl: introduce option to process unknown attributes or types ipvlan: properly track tx_errors netdevsim: Block until all devices are released nfp: using napi_build_skb() to replace build_skb() net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy" net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN net: dsa: microchip: Refactor switch shutdown routine for WoL preparation ...
show more ...
|
|
Revision tags: v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5 |
|
| #
a1fb841f
|
| 06-Oct-2023 |
Jakub Kicinski <kuba@kernel.org> |
Merge tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
==================== wireless-next patches for v6.7
The first pull req
Merge tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
==================== wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes. We have a big change how locking is handled in cfg80211 and mac80211 which removes several locks and hopefully simplifies the locking overall. In drivers rtw89 got MCC support and smaller features to other active drivers but nothing out of ordinary.
Major changes:
cfg80211 - remove wdev mutex, use the wiphy mutex instead - annotate iftype_data pointer with sparse - first kunit tests, for element defrag - remove unused scan_width support
mac80211 - major locking rework, remove several locks like sta_mtx, key_mtx etc. and use the wiphy mutex instead - remove unused shifted rate support - support antenna control in frame injection (requires driver support) - convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89 - TDMA-based multi-channel concurrency (MCC) support
iwlwifi - support set_antenna() operation - support frame injection antenna control
ath12k - WCN7850: enable 320 MHz channels in 6 GHz band - WCN7850: hardware rfkill support - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k - add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits) wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo() wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips wifi: rtw89: debug: show txpwr table according to chip gen wifi: rtw89: phy: set TX power RU limit according to chip gen wifi: rtw89: phy: set TX power limit according to chip gen wifi: rtw89: phy: set TX power offset according to chip gen wifi: rtw89: phy: set TX power by rate according to chip gen wifi: rtw89: mac: get TX power control register according to chip gen wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp wifi: rtlwifi: fix EDCA limit set by BT coexistence wifi: rt2x00: fix MT7620 low RSSI issue wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance wifi: rtw89: refine uplink trigger based control mechanism wifi: rtw89: 8851b: update TX power tables to R34 wifi: rtw89: 8852b: update TX power tables to R35 wifi: rtw89: 8852c: update TX power tables to R67 wifi: rtw89: regd: configure Thailand in regulation type wifi: mac80211: add back SPDX identifier wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines ...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
|
Revision tags: v6.6-rc4, v6.6-rc3, v6.6-rc2 |
|
| #
1bd9c9eb
|
| 13-Sep-2023 |
Miri Korenblit <miriam.rachel.korenblit@intel.com> |
wifi: iwlwifi: no power save during transition to D3
Transition to d3 is much faster if there is no power save during the transition. Therefore a new flag was added to the device power cmd to indica
wifi: iwlwifi: no power save during transition to D3
Transition to d3 is much faster if there is no power save during the transition. Therefore a new flag was added to the device power cmd to indicate the power save isn't allowed until the transition is completed. Set this flag in _iwl_mvm_suspend, when the transition begins.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.ced036106507.Ib5ed5a47ee35f624902bd8882dde3e559285965b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
show more ...
|
|
Revision tags: v6.6-rc1 |
|
| #
34069d12
|
| 05-Sep-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.5' into next
Sync up with mainline to bring in updates to the shared infrastructure.
|
| #
1ac731c5
|
| 30-Aug-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.6 merge window.
|
|
Revision tags: v6.5, v6.5-rc7, v6.5-rc6 |
|
| #
2612e3bb
|
| 07-Aug-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo V
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
| #
9f771739
|
| 07-Aug-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/1
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/121735/
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
|
Revision tags: v6.5-rc5, v6.5-rc4 |
|
| #
61b73694
|
| 24-Jul-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.5-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Revision tags: v6.5-rc3 |
|
| #
50501936
|
| 17-Jul-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.4' into next
Sync up with mainline to bring in updates to shared infrastructure.
|
| #
0791faeb
|
| 17-Jul-2023 |
Mark Brown <broonie@kernel.org> |
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using the branch.
|
|
Revision tags: v6.5-rc2 |
|
| #
2f98e686
|
| 11-Jul-2023 |
Maxime Ripard <mripard@kernel.org> |
Merge v6.5-rc1 into drm-misc-fixes
Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Revision tags: v6.5-rc1 |
|
| #
44f10dbe
|
| 30-Jun-2023 |
Andrew Morton <akpm@linux-foundation.org> |
Merge branch 'master' into mm-hotfixes-stable
|
| #
3a8a670e
|
| 28-Jun-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work fo
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full record
- Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE
- CAN: - Fintek F81604
Drivers:
- Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10
- Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames
- Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP)
- Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of
- CAN: Kvaser PCIEcan: - support packet timestamping
- WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
show more ...
|
|
Revision tags: v6.4 |
|
| #
e6988447
|
| 23-Jun-2023 |
Jakub Kicinski <kuba@kernel.org> |
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
==================== Notable changes this time around:
MAINTAINERS
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
==================== Notable changes this time around:
MAINTAINERS - add missing driver git trees
ath11k - factory test mode support
iwlwifi - config rework to drop test devices and split the different families - major update for new firmware and MLO
stack - initial multi-link reconfiguration suppor - multi-BSSID and MLO improvements
other - fix the last few W=1 warnings from GCC 13 - merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits) wifi: ieee80211: fix erroneous NSTR bitmap size checks wifi: rtlwifi: cleanup USB interface wifi: rtlwifi: simplify LED management wifi: ath10k: improve structure padding wifi: ath9k: convert msecs to jiffies where needed wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow wifi: iwlwifi: mvm: Refactor security key update after D3 wifi: mac80211: mark keys as uploaded when added by the driver wifi: iwlwifi: remove support of A0 version of FM RF wifi: iwlwifi: cfg: clean up Bz module firmware lines wifi: iwlwifi: pcie: add device id 51F1 for killer 1675 wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants wifi: iwlwifi: also unify Ma device configurations wifi: iwlwifi: also unify Sc device configurations wifi: iwlwifi: unify Bz/Gl device configurations wifi: iwlwifi: pcie: also drop jacket from info macro wifi: iwlwifi: remove support for *nJ devices wifi: iwlwifi: don't load old firmware for 22000 ... ====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
| #
4eca0fd5
|
| 20-Jun-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: iwlwifi: mvm: adjust skip-over-dtim in D3
The current formula can skip both too much and not enough time, given the +1 (where the comment about firmware is wrong). Adjust the formula according
wifi: iwlwifi: mvm: adjust skip-over-dtim in D3
The current formula can skip both too much and not enough time, given the +1 (where the comment about firmware is wrong). Adjust the formula accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.32406b6828ae.I88c315b85f7c56ac6109f84580b95a3dd104ff6c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
show more ...
|
|
Revision tags: v6.4-rc7 |
|
| #
4670d8dc
|
| 14-Jun-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: iwlwifi: mvm: track u-APSD misbehaving AP by AP address
If the AP is an AP MLD, then we shouldn't track just the BSSID but the MLD address. Just generally use ap_addr since it has the BSSID in
wifi: iwlwifi: mvm: track u-APSD misbehaving AP by AP address
If the AP is an AP MLD, then we shouldn't track just the BSSID but the MLD address. Just generally use ap_addr since it has the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
show more ...
|