Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_align

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_aligned_data, to avoid false sharing

- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

- Add SO_INQ and SCM_INQ support to AF_UNIX

- Add SIOCINQ support to AF_VSOCK

- Add TCP_MAXSEG sockopt to MPTCP

- Add IPv6 force_forwarding sysctl to enable forwarding per interface

- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB

- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users

- Convert TCP send queue handling from tasklet to BH workque

- Improve BPF iteration over TCP sockets to see each socket exactly
once

- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization

- Allow multicast routing to take effect on locally-generated packets

- Add output interface argument for End.X in segment routing

- MCTP: add support for gateway routing, improve bind() handling

- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed

- Support NUD_PERMANENT for proxy neighbor entries

- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests

- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup

- Support inspecting ref_tracker state via DebugFS

- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links

- Allow providing upcall pid for the 'execute' command in openvswitch

- Remove DCCP support from Netfilter's conntrack

- Disallow multiple packet duplications in the queuing layer

- Prevent use of deprecated iptables code on PREEMPT_RT

Driver API:

- Support RSS and hashing configuration over ethtool Netlink

- Add dedicated ethtool callbacks for getting and setting hashing
fields

- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc

- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs

- Support traffic classes in devlink rate API for bandwidth
management

- Remove rtnl_lock dependency from UDP tunnel port configuration

Device drivers:

- Add a new Broadcom driver for 800G Ethernet (bnge)

- Add a standalone driver for Microchip ZL3073x DPLL

- Remove IBM's NETIUCV device driver

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)

- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping

- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583

- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x

- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info

- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling

- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device

- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS

- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...

show more ...

Merge tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Another wireless update:
- rtw89:
- STA+P

Merge tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO

* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================

Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'iwlwifi-next-2025-07-23' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi feature, notably

- disable features in

Merge tag 'iwlwifi-next-2025-07-23' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi feature, notably

- disable features in fips
- remove RX OMI feature code
- A few fixes and cleanups
====================

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm: Remove NAN support

NAN is not officially supported on any of the MVM devices so there
is no need to maintain it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Mi

wifi: iwlwifi: mvm: Remove NAN support

NAN is not officially supported on any of the MVM devices so there
is no need to maintain it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b327adbf35c0.I0357e383ab5df72d8b87e0dee10609a6946865b6@changeid

show more ...

wifi: iwlwifi: mvm/fw: Avoid -Wflex-array-member-not-at-end warnings

-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

We have a flexible str

wifi: iwlwifi: mvm/fw: Avoid -Wflex-array-member-not-at-end warnings

-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs,
but those don't even need the flexible part.

So, we add iwl_tx_cmd_v6_params, that will contain everything except the
flexible array and use this one for the containing structs.

Also, as part of the refactoring remove unused flex array `payload`.

So, with these changes, fix the following warnings:

drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp
[use iwl_tx_cmd_v6_params as described in the changed commit message]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>

show more ...

Merge tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Another set of changes, notably:
- cfg80211:

Merge tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling

* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================

Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge tag 'iwlwifi-next-2025-07-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi features, notably

- cleanup of unsuppor

Merge tag 'iwlwifi-next-2025-07-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi features, notably

- cleanup of unsupported APIs
- add a API range per RF
- transport layer cleanups
- a few small fixes
====================

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm/mld: use average RSSI for beacons

When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only tra

wifi: iwlwifi: mvm/mld: use average RSSI for beacons

When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.

To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid

show more ...

wifi: iwlwifi: mvm: remove extra link ID

Since the iwlmvm driver now only supports pre-MLO devices,
we no longer need to maintain an extra explicit link ID;
valid MAC IDs and link IDs are both in th

wifi: iwlwifi: mvm: remove extra link ID

Since the iwlmvm driver now only supports pre-MLO devices,
we no longer need to maintain an extra explicit link ID;
valid MAC IDs and link IDs are both in the range 0-3 and
the driver always has a 1:1 MAC/link correspondence. Thus,
simply use the MAC ID as the link ID as well.

This simplifies some further work because on RX the ID is
given but there is some confusion about which versions of
the firmware report MAC and which report link ID.

While at it, clarify iwl_mvm_handle_missed_beacons_notif()
code a bit so it doesn't look like an invalid vif pointer
is being used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.005aa5fe34fe.Ib0c1187453f46ce49dc0f9f58907ee21f5b52634@changeid

show more ...

wifi: iwlwifi: mvm: remove IWL_MVM_ESR_EXIT_FAIL_ENTRY

EHT capable devices will only use iwlmld. So we can remove EMLSR code
from iwlmvm.
As part of removal, remove IWL_MVM_ESR_EXIT_FAIL_ENTRY EMLSR

wifi: iwlwifi: mvm: remove IWL_MVM_ESR_EXIT_FAIL_ENTRY

EHT capable devices will only use iwlmld. So we can remove EMLSR code
from iwlmvm.
As part of removal, remove IWL_MVM_ESR_EXIT_FAIL_ENTRY EMLSR state.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.a69dc9c6ba49.I7f9fbc1f954b4c118625a4b8d51c72f3c84936da@changeid

show more ...

wifi: iwlwifi: mvm: remove regulatory puncturing setup

We don't have puncturing before EHT, and EHT devices aren't
supported in iwlmvm, so remove the regulatory puncturing
setup code.

Signed-off-by

wifi: iwlwifi: mvm: remove regulatory puncturing setup

We don't have puncturing before EHT, and EHT devices aren't
supported in iwlmvm, so remove the regulatory puncturing
setup code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.b2a28a99725b.I72ba276cb705c02cea8f68e27ef3935d5120cfee@changeid

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'wireless-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
The usual features/cleanups/etc., notably:

Merge tag 'wireless-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
The usual features/cleanups/etc., notably:

- rtw88: IBSS mode for SDIO devices
- rtw89:
- BT coex for MLO/WiFi7
- work on station + P2P concurrency
- ath: fix W=2 export.h warnings
- ath12k: fix scan on multi-radio devices
- cfg80211/mac80211: MLO statistics
- mac80211: S1G aggregation
- cfg80211/mac80211: per-radio RTS threshold

* tag 'wireless-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (171 commits)
wifi: iwlwifi: dvm: fix potential overflow in rs_fill_link_cmd()
iwlwifi: Add missing check for alloc_ordered_workqueue
wifi: iwlwifi: Fix memory leak in iwl_mvm_init()
iwlwifi: api: delete repeated words
iwlwifi: remove unused no_sleep_autoadjust declaration
iwlwifi: Fix comment typo
iwlwifi: use DECLARE_BITMAP macro
iwlwifi: fw: simplify the iwl_fw_dbg_collect_trig()
wifi: iwlwifi: mld: ftm: fix switch end indentation
MAINTAINERS: update iwlwifi git link
wifi: iwlwifi: pcie: fix non-MSIX handshake register
wifi: iwlwifi: mld: don't exit EMLSR when we shouldn't
wifi: iwlwifi: move _iwl_trans_set_bits_mask utilities
wifi: iwlwifi: mld: make iwl_mld_add_all_rekeys void
wifi: iwlwifi: move iwl_trans_pcie_write_mem to iwl-trans.c
wifi: iwlwifi: pcie: move iwl_trans_pcie_dump_regs() to utils.c
wifi: iwlwifi: mld: advertise support for TTLM changes
wifi: iwlwifi: mld: Block EMLSR when scanning on P2P Device
wifi: iwlwifi: mld: use the correct struct size for tracing
wifi: iwlwifi: support RZL platform device ID
...
====================

Link: https://patch.msgid.link/20250625120135.41933-55-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'iwlwifi-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi-next - iwlwifi features

Mostly cleanups

Merge tag 'iwlwifi-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Miri Korenblit says:
====================
iwlwifi-next - iwlwifi features

Mostly cleanups. A few fixes and small features.
====================

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: move dBm averaging function into utils

The function really is just a simple math helper. Move it into
iwl-utils.c so that it can also be used by iwlmld.

Signed-off-by: Benjamin Berg

wifi: iwlwifi: move dBm averaging function into utils

The function really is just a simple math helper. Move it into
iwl-utils.c so that it can also be used by iwlmld.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609211928.8cc965af6990.I09bb2137863e888efe756c92d8eb0271ec95456c@changeid

show more ...

wifi: cfg80211/mac80211: Add support to get radio index

Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user.

wifi: cfg80211/mac80211: Add support to get radio index

Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.

To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM

By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.

Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allo

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.

- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.

- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.

- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.

- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.

- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.

- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.

Netfilter:

- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.

- Implement support for wildcard netdevice in netdev basechain and
flowtables.

- Integrate conntrack information into nft trace infrastructure.

- Export set count and backend name to userspace, for better
introspection.

BPF:

- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.

- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.

Protocols:

- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.

- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.

- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.

- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.

- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.

- Extend TCP drop-reason support to cover PAWS checks.

Driver API:

- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.

- Converted several device drivers to timestamping APIs.

- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.

Tests and tooling:

- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.

- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.

- Extend MPTCP selftests to improve the code-coverage.

- Add tests for XDP tail adjustment in AF_XDP.

New hardware / drivers:

- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.

- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

- Broadcom asp-v3.0 ethernet driver.

- AMD Renoir ethernet device.

- ReakTek MT9888 2.5G ethernet PHY driver.

- Aeonsemi 10G C45 PHYs driver.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices

- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops

- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support

- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs

- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.

- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna

- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Lots of new things, notably:
* ath12k: monit

Merge tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Lots of new things, notably:
* ath12k: monitor mode for WCN7850, better 6 GHz regulatory
* brcmfmac: SAE for some Cypress devices
* iwlwifi: rework device configuration
* mac80211: scan improvements with MLO
* mt76: EHT improvements, new device IDs
* rtw88: throughput improvements
* rtw89: MLO, STA/P2P concurrency improvements, SAR

* tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (389 commits)
wifi: mt76: mt7925: add rfkill_poll for hardware rfkill
wifi: mt76: support power delta calculation for 5 TX paths
wifi: mt76: fix available_antennas setting
wifi: mt76: mt7996: fix RX buffer size of MCU event
wifi: mt76: mt7996: change max beacon size
wifi: mt76: mt7996: fix invalid NSS setting when TX path differs from NSS
wifi: mt76: mt7996: drop fragments with multicast or broadcast RA
wifi: mt76: mt7996: set EHT max ampdu length capability
wifi: mt76: mt7996: fix beamformee SS field
wifi: mt76: remove capability of partial bandwidth UL MU-MIMO
wifi: mt76: mt7925: add test mode support
wifi: mt76: mt7925: extend MCU support for testmode
wifi: mt76: mt7925: ensure all MCU commands wait for response
wifi: mt76: mt7925: refine the sniffer commnad
wifi: mt76: mt7925: prevent multiple scan commands
wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init()
wifi: mt76: mt7925: add RNR scan support for 6GHz
wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routine
wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL check
...
====================

Link: https://patch.msgid.link/20250522165501.189958-50-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...